All MIBs › WebGraph-AnalogIn-57641-US-MIB › wtWebGraphAnalogIn57641GetHeaderEnable
wtWebGraphAnalogIn57641GetHeaderEnable
Module: WebGraph-AnalogIn-57641-US-MIB
OID (symbolic): WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641GetHeaderEnable
OID (numeric): 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
What is wtWebGraphAnalogIn57641GetHeaderEnable?
A bitmask controlling short-form HTTP GET responses: bit 0 prefixes replies with the device's IP address and name, and bit 1 enables the GET-over-HTTP short form itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2 snmpwalk -v2c -c public <target> WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641GetHeaderEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2.1 snmpget -v2c -c public <target> WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641GetHeaderEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2.1 s <value>
Start monitoring WebGraph AnalogIn-57641 networked analog sensor interface (channel reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641GetHeaderEnable OID value, configure state conditions and alerts, and monitor any WebGraph AnalogIn-57641 networked analog sensor interface (channel reading/threshold-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.10 | wtWebGraphAnalogIn57641 | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3 | wtWebGraphAnalogIn57641Config | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1 | wtWebGraphAnalogIn57641Device | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3 | wtWebGraphAnalogIn57641Basic | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.2 | wtWebGraphAnalogIn57641HTTP | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2 | wtWebGraphAnalogIn57641GetHeaderEnable | WebGraph-AnalogIn-57641-US-MIB |