WebGraph-AnalogIn-57641-US-MIB DEFINITIONS ::= BEGIN ---------------------------------------------------------------- -- Revison: 1.29 ---------------------------------------------------------------- -- 22.06.2010 Webio -- Syntax correction ---------------------------------------------------------------- -- Revison: 1.28 ---------------------------------------------------------------- -- 02.12.2008 Webio -- New Graphics java script base parameter ---------------------------------------------------------------- -- Revison: 1.27 ---------------------------------------------------------------- -- 09.11.2006 Webio -- DHCP enable ---------------------------------------------------------------- -- Revison: 1.26 ---------------------------------------------------------------- -- 28.06.2006 New: Community String Trap -- ---------------------------------------------------------------- -- Revison: 1.25 ---------------------------------------------------------------- -- 25.11.2005 #57641, WebGraph AnalogIn -- OID correction ---------------------------------------------------------------- -- Revison: 1.24 ---------------------------------------------------------------- -- 26.07.2005 #57641, WebGraph AnalogIn -- CRON timer function ---------------------------------------------------------------- -- Revison: 1.23 ---------------------------------------------------------------- -- 14.07.2005 #57641, WebGraph AnalogIn -- FTP functions ---------------------------------------------------------------- -- Revison: 1.22 ---------------------------------------------------------------- -- 17.05.2005 #57641, WebGraph AnalogIn -- Trap NMS annotations ---------------------------------------------------------------- -- Revison: 1.21 ---------------------------------------------------------------- -- 19.04.2005 #57605, WebGraph Themometer -- Mail Authentication ---------------------------------------------------------------- -- Revison: 1.20 ---------------------------------------------------------------- -- 05.11.2004 #57606, WebGraph Thermo-Hygrometer -- New: Syslog -- ---------------------------------------------------------------- -- Revison: 1.19 ---------------------------------------------------------------- -- 08.09.2004 #57606 WebGraph Thermo-Hygrometer -- New: -- wtWebGraphThermHygroAlarmRHMin -- wtWebGraphThermHygroAlarmRHMax -- wtWebGraphThermHygroAlarmRHHysteresis -- wtWebGraphThermHygroPortSensorSelect -- wtWebGraphThermHygroAlarmDeltaTemp -- wtWebGraphThermHygroAlarmAHMin -- wtWebGraphThermHygroAlarmAHMax ---------------------------------------------------------------- -- Revison: 1.18 ---------------------------------------------------------------- -- 21.07.2004 #57601/3/4, Webio Anx -- New: -- Diagnosis ---------------------------------------------------------------- -- Revison: 1.17 ---------------------------------------------------------------- -- 28.06.2004 #57630/1/2, Webio Digital -- Neu: Puls Mode ---------------------------------------------------------------- -- Revison: 1.16 ---------------------------------------------------------------- -- 16.04.2004 New: #57632, Webio Digital EA24x24 -- -- #57630/1, Webio Digital EA12x12 -- New: -- wtWebioEA12x12InputCounterClear ---------------------------------------------------------------- -- Revison: 1.15 ---------------------------------------------------------------- -- 27.02.2004 #57630/1, Webio Digital EA12x12 -- New: -- Length changed to 32 Bit: -- wtWebioEA12x12InputValue -- wtWebioEA12x12OutputValue -- wtWebioEA12x12LoadControlView -- wtWebioEA12x12LCShutDownView -- wtWebioEA12x12SetOutput -- wtWebioEA12x12AlarmInputTrigger -- wtWebioEA12x12AlarmOutputTrigger -- wtWebioEA12x12PortOutputSafetyState ---------------------------------------------------------------- -- Revison: 1.14 ---------------------------------------------------------------- -- 16.02.2004 #57630/1, Webio Digital EA12x12 -- New: -- Text: Location, Contact -- SNMP: ColdStart, WarmStart, ComunityString Read/RW -- Alarm: ColdStart / WarmStart trigger -- -- #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New: -- Alarm Hysteresis -- Alarm Clear Traps and Mails ---------------------------------------------------------------- -- Revison: 1.13 ---------------------------------------------------------------- -- 05.02.2004 #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New: -- Text: Location, Contact -- SNMP: ColdStart, WarmStart, ComunityString Read/RW -- Alarm: ColdStart / WarmStart trigger ---------------------------------------------------------------- -- Revison: 1.12 ---------------------------------------------------------------- -- 05.11.2003 #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New features: -- Mail : Option CSV attachment -- Port : Offset calibration -- Alarm : TCP Client mode ---------------------------------------------------------------- -- Revison: 1.11 ---------------------------------------------------------------- -- 28.10.2003 #57630/1, Webio Digital EA12x12 -- New features: -- Alarm : TCP Client mode -- Inputs: Puls filter ---------------------------------------------------------------- -- Revison: 1.10 ---------------------------------------------------------------- -- 22.07.2003 #57630, Webio Digital EA12x12 -- New navigation tree, new binary modes -- ---------------------------------------------------------------- -- Revison: 1.09 ---------------------------------------------------------------- -- 24.03.2003 Trap Enterprise (Type 1, 2) corrected ---------------------------------------------------------------- -- Revison: 1.08 ---------------------------------------------------------------- -- 04.03.2003 reconciled the language versions DE/US ---------------------------------------------------------------- -- Revison: 1.07 ---------------------------------------------------------------- -- 25.02.2003 Correction: wtWebioEA12x12LoadControl ---------------------------------------------------------------- -- Revison: 1.06 ---------------------------------------------------------------- -- 24.02.2003 New: -- #57630, Webio EA12x12, LoadControl Group -- Correction: Trap variable names ---------------------------------------------------------------- -- Revison: 1.05 ---------------------------------------------------------------- -- 21.01.2003 New: -- #57630, Webio EA12x12 ---------------------------------------------------------------- -- Revison: 1.04 ---------------------------------------------------------------- -- 02.01.2003 New: -- #57601, 1xWebThermometer -- #57603, 2xWebThermometer, 8 alarms ---------------------------------------------------------------- -- Revison: 1.03 ---------------------------------------------------------------- -- 21.11.2002 New: -- #57604, 2xWebThermometer, BOOTP, StartupSite -- #57603, 8xWebThermometer, BOOTP, StartupSite ---------------------------------------------------------------- -- Revison: 1.02 ---------------------------------------------------------------- -- 26.07.2002 New: -- #57604, 2xWebThermometer -- #57603, 8xWebThermometer -- IMPORTS OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString, PhysAddress FROM RFC1213-MIB enterprises, TimeTicks, IpAddress, NetworkAddress FROM RFC1155-SMI; -- IpAddress ::= -- [APPLICATION 0] -- IMPLICIT OCTET STRING (SIZE (4)) -- Counter ::= -- [APPLICATION 1] -- IMPLICIT INTEGER (0..4294967295) -- Gauge ::= -- [APPLICATION 2] -- IMPLICIT INTEGER (0..4294967295) -- TimeTicks ::= -- [APPLICATION 3] -- IMPLICIT INTEGER (0..4294967295) -- DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING -- internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 } -- privat OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { privat 1 } -- Wiesemann & Theis Com-Server MIB wut OBJECT IDENTIFIER ::= { enterprises 5040 } wtComServer OBJECT IDENTIFIER ::= { wut 1 } wtWebio OBJECT IDENTIFIER ::= { wtComServer 2 } -- wtWebGraph Tree wtWebGraphAnalogIn57641 OBJECT IDENTIFIER ::= { wtWebio 10 } -- wtWebGraphAnalogIn57641 Tree wtWebGraphAnalogIn57641Inventory OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641 1 } wtWebGraphAnalogIn57641SessCntrl OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641 2 } wtWebGraphAnalogIn57641Config OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641 3 } wtWebGraphAnalogIn57641Diag OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641 4 } -- wtWebGraphAnalogIn57641Config Tree wtWebGraphAnalogIn57641Device OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Config 1 } wtWebGraphAnalogIn57641Ports OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Config 2 } wtWebGraphAnalogIn57641Manufact OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Config 3 } -- wtWebGraphAnalogIn57641Device Tree wtWebGraphAnalogIn57641Text OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Device 1 } wtWebGraphAnalogIn57641TimeDate OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Device 2 } wtWebGraphAnalogIn57641Basic OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Device 3 } wtWebGraphAnalogIn57641Datalogger OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Device 4 } wtWebGraphAnalogIn57641Alarm OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Device 5 } wtWebGraphAnalogIn57641Graphics OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Device 6 } -- wtWebGraphAnalogIn57641TimeDate Tree wtWebGraphAnalogIn57641TimeZone OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641TimeDate 1 } wtWebGraphAnalogIn57641TimeServer OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641TimeDate 2 } wtWebGraphAnalogIn57641DeviceClock OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641TimeDate 3 } -- wtWebGraphAnalogIn57641Basic Tree wtWebGraphAnalogIn57641Network OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Basic 1 } wtWebGraphAnalogIn57641HTTP OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Basic 2 } wtWebGraphAnalogIn57641Mail OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Basic 3 } wtWebGraphAnalogIn57641SNMP OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Basic 4 } wtWebGraphAnalogIn57641UDP OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Basic 5 } wtWebGraphAnalogIn57641Syslog OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Basic 6 } wtWebGraphAnalogIn57641FTP OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Basic 7 } -- wtWebGraphAnalogIn57641Graphics Tree wtWebGraphAnalogIn57641GraphicsBase OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Graphics 1 } wtWebGraphAnalogIn57641GraphicsSelect OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Graphics 2 } wtWebGraphAnalogIn57641GraphicsScale OBJECT IDENTIFIER ::= { wtWebGraphAnalogIn57641Graphics 3 } -- wtWebGraphAnalogIn57641Inventory Group ------------------------ wtWebGraphAnalogIn57641Sensors OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Number of sensors" ::= { wtWebGraphAnalogIn57641Inventory 1 } -- Interface Table wtWebGraphAnalogIn57641SensorTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641SensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensors." ::= { wtWebGraphAnalogIn57641Inventory 2 } wtWebGraphAnalogIn57641SensorEntry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641SensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor numbers." INDEX { wtWebGraphAnalogIn57641SensorNo } ::= { wtWebGraphAnalogIn57641SensorTable 1 } WtWebGraphAnalogIn57641SensorEntry ::= SEQUENCE { wtWebGraphAnalogIn57641SensorNo INTEGER } wtWebGraphAnalogIn57641SensorNo OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Sensor number." ::= { wtWebGraphAnalogIn57641SensorEntry 1 } -- wtWebGraphAnalogIn57641Values Table wtWebGraphAnalogIn57641ValuesTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641ValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of measurement values corresponding to the channel numbers." ::= { wtWebGraphAnalogIn57641Inventory 3 } wtWebGraphAnalogIn57641ValuesEntry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641ValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Measurement values of the sensors." INDEX { wtWebGraphAnalogIn57641SensorNo } ::= { wtWebGraphAnalogIn57641ValuesTable 1 } WtWebGraphAnalogIn57641ValuesEntry ::= SEQUENCE{ wtWebGraphAnalogIn57641Values OCTET STRING } wtWebGraphAnalogIn57641Values OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5)) ACCESS read-only STATUS mandatory DESCRIPTION "Measurement value of the sensor, ASCII, 7 characters in length." ::= { wtWebGraphAnalogIn57641ValuesEntry 1 } -- wtWebGraphAnalogIn57641BinaryValues Table wtWebGraphAnalogIn57641BinaryValuesTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641BinaryValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of binary measurement values corresponding to the channel numbers." ::= { wtWebGraphAnalogIn57641Inventory 4 } wtWebGraphAnalogIn57641BinaryValuesEntry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641BinaryValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Binary measurement values of the sensors." INDEX { wtWebGraphAnalogIn57641SensorNo } ::= { wtWebGraphAnalogIn57641BinaryValuesTable 1 } WtWebGraphAnalogIn57641BinaryValuesEntry ::= SEQUENCE{ wtWebGraphAnalogIn57641BinaryValues INTEGER } wtWebGraphAnalogIn57641BinaryValues OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value." ::= { wtWebGraphAnalogIn57641BinaryValuesEntry 1 } -- wtWebGraphAnalogIn57641SessCntrl Group -------------------------------- wtWebGraphAnalogIn57641SessCntrlPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalogIn57641SessCntrlLogout. When read this variable provides a string of length zero." ::= { wtWebGraphAnalogIn57641SessCntrl 1 } wtWebGraphAnalogIn57641SessCntrlConfigMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641SessCntrl-NoSession(0), wtWebGraphAnalogIn57641SessCntrl-Session(1) } ACCESS read-only STATUS mandatory DESCRIPTION "When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read." ::= { wtWebGraphAnalogIn57641SessCntrl 2 } wtWebGraphAnalogIn57641SessCntrlLogout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0." ::= { wtWebGraphAnalogIn57641SessCntrl 3 } wtWebGraphAnalogIn57641SessCntrlAdminPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public." ::= { wtWebGraphAnalogIn57641SessCntrl 4 } wtWebGraphAnalogIn57641SessCntrlConfigPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer." ::= { wtWebGraphAnalogIn57641SessCntrl 5 } -- wtWebGraphAnalogIn57641Text Group ------------------------ wtWebGraphAnalogIn57641DeviceName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the Webio, which is user definable." ::= { wtWebGraphAnalogIn57641Text 1 } wtWebGraphAnalogIn57641DeviceText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the Webio, which is user definable." ::= { wtWebGraphAnalogIn57641Text 2 } wtWebGraphAnalogIn57641DeviceLocation OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the location of the Webio, which is user definable." ::= { wtWebGraphAnalogIn57641Text 3 } wtWebGraphAnalogIn57641DeviceContact OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Contact address of the system operator of the Webio, which is user definable." ::= { wtWebGraphAnalogIn57641Text 4 } -- wtWebGraphAnalogIn57641TimeZone Group ---------------------------- wtWebGraphAnalogIn57641TzOffsetHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset hours for the time zone (winter time) with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 1 } wtWebGraphAnalogIn57641TzOffsetMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset minutes for the time zone (winter time) with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 2 } wtWebGraphAnalogIn57641TzEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone" ::= { wtWebGraphAnalogIn57641TimeZone 3 } wtWebGraphAnalogIn57641StTzOffsetHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset hours of the time zone (summer time) with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 4 } wtWebGraphAnalogIn57641StTzOffsetMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset minutes of the time zone (summer time) with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 5 } wtWebGraphAnalogIn57641StTzEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime" ::= { wtWebGraphAnalogIn57641TimeZone 6 } wtWebGraphAnalogIn57641StTzStartMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641StartMonth-January(1), wtWebGraphAnalogIn57641StartMonth-February(2), wtWebGraphAnalogIn57641StartMonth-March(3), wtWebGraphAnalogIn57641StartMonth-April(4), wtWebGraphAnalogIn57641StartMonth-May(5), wtWebGraphAnalogIn57641StartMonth-June(6), wtWebGraphAnalogIn57641StartMonth-July(7), wtWebGraphAnalogIn57641StartMonth-August(8), wtWebGraphAnalogIn57641StartMonth-September(9), wtWebGraphAnalogIn57641StartMonth-October(10), wtWebGraphAnalogIn57641StartMonth-November(11), wtWebGraphAnalogIn57641StartMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Month in which the change is made from winter time to summer time." ::= { wtWebGraphAnalogIn57641TimeZone 7 } wtWebGraphAnalogIn57641StTzStartMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641StartMode-first(1), wtWebGraphAnalogIn57641StartMode-second(2), wtWebGraphAnalogIn57641StartMode-third(3), wtWebGraphAnalogIn57641StartMode-fourth(4), wtWebGraphAnalogIn57641StartMode-last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of the day of the week for which the change is made from winter time to summer time." ::= { wtWebGraphAnalogIn57641TimeZone 8 } wtWebGraphAnalogIn57641StTzStartWday OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641StartWday-Sunday(1), wtWebGraphAnalogIn57641StartWday-Monday(2), wtWebGraphAnalogIn57641StartWday-Tuesday(3), wtWebGraphAnalogIn57641StartWday-Thursday(4), wtWebGraphAnalogIn57641StartWday-Wednesday(5), wtWebGraphAnalogIn57641StartWday-Friday(6), wtWebGraphAnalogIn57641StartWday-Saturday(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Day of the week on which the change is made from winter time to summer time" ::= { wtWebGraphAnalogIn57641TimeZone 9 } wtWebGraphAnalogIn57641StTzStartHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Hour in which the time zone is changed from winter to summer time with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 10 } wtWebGraphAnalogIn57641StTzStartMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minute in which the time zone is changed from winter to summer time with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 11 } wtWebGraphAnalogIn57641StTzStopMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641StopMonth-January(1), wtWebGraphAnalogIn57641StopMonth-February(2), wtWebGraphAnalogIn57641StopMonth-March(3), wtWebGraphAnalogIn57641StopMonth-April(4), wtWebGraphAnalogIn57641StopMonth-May(5), wtWebGraphAnalogIn57641StopMonth-June(6), wtWebGraphAnalogIn57641StopMonth-July(7), wtWebGraphAnalogIn57641StopMonth-August(8), wtWebGraphAnalogIn57641StopMonth-September(9), wtWebGraphAnalogIn57641StopMonth-October(10), wtWebGraphAnalogIn57641StopMonth-November(11), wtWebGraphAnalogIn57641StopMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Month in which the change is made from summer time to winter time." ::= { wtWebGraphAnalogIn57641TimeZone 12 } wtWebGraphAnalogIn57641StTzStopMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641StopMode-first(1), wtWebGraphAnalogIn57641StopMode-second(2), wtWebGraphAnalogIn57641StopMode-third(3), wtWebGraphAnalogIn57641StopMode-fourth(4), wtWebGraphAnalogIn57641StopMode-last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of the week day on which the change is made from summer time to winter time." ::= { wtWebGraphAnalogIn57641TimeZone 13 } wtWebGraphAnalogIn57641StTzStopWday OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641StopWday-Sunday(1), wtWebGraphAnalogIn57641StopWday-Monday(2), wtWebGraphAnalogIn57641StopWday-Tuesday(3), wtWebGraphAnalogIn57641StopWday-Thursday(4), wtWebGraphAnalogIn57641StopWday-Wednesday(5), wtWebGraphAnalogIn57641StopWday-Friday(6), wtWebGraphAnalogIn57641StopWday-Saturday(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Day of the week on which the change is made from summer time to winter time." ::= { wtWebGraphAnalogIn57641TimeZone 14 } wtWebGraphAnalogIn57641StTzStopHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Hour at which the time zone is changed from summer to winter time with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 15 } wtWebGraphAnalogIn57641StTzStopMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minute at which the time zone is changed from summer to winter time with respect to UTC." ::= { wtWebGraphAnalogIn57641TimeZone 16 } -- wtWebGraphAnalogIn57641TimeServer Group ---------------------------- wtWebGraphAnalogIn57641TimeServer1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address or name of the 1st time server in ASCII" ::= { wtWebGraphAnalogIn57641TimeServer 1 } wtWebGraphAnalogIn57641TimeServer2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address or name of the 2nd time server in ASCII" ::= { wtWebGraphAnalogIn57641TimeServer 2 } wtWebGraphAnalogIn57641TsEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server" ::= { wtWebGraphAnalogIn57641TimeServer 3 } wtWebGraphAnalogIn57641TsSyncTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Daily synchronisation time with the time server (hour: 0-23)." ::= { wtWebGraphAnalogIn57641TimeServer 4 } -- wtWebGraphAnalogIn57641DeviceClock Group ---------------------------- wtWebGraphAnalogIn57641ClockHrs OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-write STATUS mandatory DESCRIPTION "Clock hours taking into account the time zone settings." ::= { wtWebGraphAnalogIn57641DeviceClock 1 } wtWebGraphAnalogIn57641ClockMin OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "Clock minutes taking into account the time zone settings." ::= { wtWebGraphAnalogIn57641DeviceClock 2 } wtWebGraphAnalogIn57641ClockDay OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Date: Day of the month, taking into account the time zone settings." ::= { wtWebGraphAnalogIn57641DeviceClock 3 } wtWebGraphAnalogIn57641ClockMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641ClockMonth-January(1), wtWebGraphAnalogIn57641ClockMonth-February(2), wtWebGraphAnalogIn57641ClockMonth-March(3), wtWebGraphAnalogIn57641ClockMonth-April(4), wtWebGraphAnalogIn57641ClockMonth-May(5), wtWebGraphAnalogIn57641ClockMonth-June(6), wtWebGraphAnalogIn57641ClockMonth-July(7), wtWebGraphAnalogIn57641ClockMonth-August(8), wtWebGraphAnalogIn57641ClockMonth-September(9), wtWebGraphAnalogIn57641ClockMonth-October(10), wtWebGraphAnalogIn57641ClockMonth-November(11), wtWebGraphAnalogIn57641ClockMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Date: Month, taking into account the time zone settings." ::= { wtWebGraphAnalogIn57641DeviceClock 4 } wtWebGraphAnalogIn57641ClockYear OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Date: Year, taking into account the time zone settings." ::= { wtWebGraphAnalogIn57641DeviceClock 5 } -- wtWebGraphAnalogIn57641Network Group ------------------------ wtWebGraphAnalogIn57641IpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the Webio" ::= { wtWebGraphAnalogIn57641Network 1 } wtWebGraphAnalogIn57641SubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Subnet mask of the Webio" ::= { wtWebGraphAnalogIn57641Network 2 } wtWebGraphAnalogIn57641Gateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Gateway of the Webio" ::= { wtWebGraphAnalogIn57641Network 3 } wtWebGraphAnalogIn57641DnsServer1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the 1st DNS server in ASCII" ::= { wtWebGraphAnalogIn57641Network 4 } wtWebGraphAnalogIn57641DnsServer2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the 2nd DNS server in ASCII" ::= { wtWebGraphAnalogIn57641Network 5 } wtWebGraphAnalogIn57641AddConfig OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable " ::= { wtWebGraphAnalogIn57641Network 6 } -- wtWebGraphAnalogIn57641HTTP Group -------------------------------- wtWebGraphAnalogIn57641Startup OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time." ::= { wtWebGraphAnalogIn57641HTTP 1 } wtWebGraphAnalogIn57641GetHeaderEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable" ::= { wtWebGraphAnalogIn57641HTTP 2 } wtWebGraphAnalogIn57641HttpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Definition of the standard HTML port (Default: 80)." ::= { wtWebGraphAnalogIn57641HTTP 3 } -- wtWebGraphAnalogIn57641Mail Group -------------------------------- wtWebGraphAnalogIn57641MailAdName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Device name for mail administration." ::= { wtWebGraphAnalogIn57641Mail 1 } wtWebGraphAnalogIn57641MailReply OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Reply address for the mail server." ::= { wtWebGraphAnalogIn57641Mail 2 } wtWebGraphAnalogIn57641MailServer OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the mail server." ::= { wtWebGraphAnalogIn57641Mail 3 } wtWebioAn1MailEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable" ::= { wtWebGraphAnalogIn57641Mail 4 } wtWebGraphAnalogIn57641MailAuthentication OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication" ::= { wtWebGraphAnalogIn57641Mail 5 } wtWebGraphAnalogIn57641MailAuthUser OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the user to be authenticated." ::= { wtWebGraphAnalogIn57641Mail 6 } wtWebGraphAnalogIn57641MailAuthPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Authentication password." ::= { wtWebGraphAnalogIn57641Mail 7 } wtWebGraphAnalogIn57641MailPop3Server OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or Ip-address of the POP3 Servers." ::= { wtWebGraphAnalogIn57641Mail 8 } -- wtWebGraphAnalogIn57641SNMP Group -------------------------------- wtWebGraphAnalogIn57641SnmpCommunityStringRead OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string read only" ::= { wtWebGraphAnalogIn57641SNMP 1 } wtWebGraphAnalogIn57641SnmpCommunityStringReadWrite OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string read / write" ::= { wtWebGraphAnalogIn57641SNMP 2 } wtWebGraphAnalogIn57641SystemTrapManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the system trap." ::= { wtWebGraphAnalogIn57641SNMP 3 } wtWebGraphAnalogIn57641SystemTrapEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused" ::= { wtWebGraphAnalogIn57641SNMP 4 } wtWebGraphAnalogIn57641SnmpEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable" ::= { wtWebGraphAnalogIn57641SNMP 5 } wtWebGraphAnalogIn57641SnmpCommunityStringTrap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string send within traps." ::= { wtWebGraphAnalogIn57641SNMP 6 } -- wtWebGraphAnalogIn57641UDP Group -------------------------------- wtWebGraphAnalogIn57641UdpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device." ::= { wtWebGraphAnalogIn57641UDP 1 } wtWebGraphAnalogIn57641UdpEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable" ::= { wtWebGraphAnalogIn57641UDP 2 } -- wtWebGraphAnalogIn57641Syslog Group -------------------------------- wtWebGraphAnalogIn57641SyslogServerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the Syslog server, which accepts the Syslog messgaes." ::= { wtWebGraphAnalogIn57641Syslog 1 } wtWebGraphAnalogIn57641SyslogServerPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Portnumber of the Syslog servers, default 514." ::= { wtWebGraphAnalogIn57641Syslog 2 } wtWebGraphAnalogIn57641SyslogSystemMessagesEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused" ::= { wtWebGraphAnalogIn57641Syslog 3 } wtWebGraphAnalogIn57641SyslogEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable" ::= { wtWebGraphAnalogIn57641Syslog 4 } -- wtWebGraphAnalogIn57641FTP Group -------------------------------- wtWebGraphAnalogIn57641FTPServerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the FTP server, which accepts the FTP messages." ::= { wtWebGraphAnalogIn57641FTP 1 } wtWebGraphAnalogIn57641FTPServerControlPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Portnumber of the control port of the FTP server, default 21." ::= { wtWebGraphAnalogIn57641FTP 2 } wtWebGraphAnalogIn57641FTPUserName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: user name." ::= { wtWebGraphAnalogIn57641FTP 3 } wtWebGraphAnalogIn57641FTPPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: user password." ::= { wtWebGraphAnalogIn57641FTP 4 } wtWebGraphAnalogIn57641FTPAccount OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: name of account." ::= { wtWebGraphAnalogIn57641FTP 5 } wtWebGraphAnalogIn57641FTPOption OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable" ::= { wtWebGraphAnalogIn57641FTP 6 } wtWebGraphAnalogIn57641FTPEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable" ::= { wtWebGraphAnalogIn57641FTP 7 } -- wtWebGraphAnalogIn57641Datalogger Group -------------------------------- wtWebGraphAnalogIn57641LoggerTimebase OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641Datalogger-1Min(1), wtWebGraphAnalogIn57641Datalogger-5Min(2), wtWebGraphAnalogIn57641Datalogger-15Min(3), wtWebGraphAnalogIn57641Datalogger-60Min(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Time base of the data logger" ::= { wtWebGraphAnalogIn57641Datalogger 1 } wtWebGraphAnalogIn57641LoggerSensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalogIn57641Datalogger 2 } wtWebGraphAnalogIn57641DisplaySensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalogIn57641Datalogger 3 } -- Graph Sensor Color Table wtWebGraphAnalogIn57641SensorColorTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641SensorColorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor colors for the praphical presentation." ::= { wtWebGraphAnalogIn57641Datalogger 4 } wtWebGraphAnalogIn57641SensorColorEntry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641SensorColorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Index numbers of the sensors." INDEX { wtWebGraphAnalogIn57641SensorNo } ::= { wtWebGraphAnalogIn57641SensorColorTable 1 } WtWebGraphAnalogIn57641SensorColorEntry ::= SEQUENCE { wtWebGraphAnalogIn57641SensorColor OCTET STRING } wtWebGraphAnalogIn57641SensorColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Color of the sensors at the praphical presention." ::= { wtWebGraphAnalogIn57641SensorColorEntry 1 } wtWebGraphAnalogIn57641AutoScaleEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable" ::= { wtWebGraphAnalogIn57641Datalogger 5 } wtWebGraphAnalogIn57641VerticalUpperLimit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641Datalogger 6 } wtWebGraphAnalogIn57641VerticalLowerLimit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641Datalogger 7 } wtWebGraphAnalogIn57641HorizontalZoom OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalogIn57641Zoom-25min(1), wtWebGraphAnalogIn57641Zoom-75min(2), wtWebGraphAnalogIn57641Zoom-5hrs(3), wtWebGraphAnalogIn57641Zoom-30hrs(4), wtWebGraphAnalogIn57641Zoom-5days(5), wtWebGraphAnalogIn57641Zoom-25days(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the default zoom stage, if no auto scaling is selected." ::= { wtWebGraphAnalogIn57641Datalogger 8 } -- wtWebGraphAnalogIn57641Alarm Group ---------------------------- wtWebGraphAnalogIn57641AlarmCount OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Number of independent alarms." ::= { wtWebGraphAnalogIn57641Alarm 1 } -- Alarm Interface Table wtWebGraphAnalogIn57641AlarmIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641AlarmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of alarm indices." ::= { wtWebGraphAnalogIn57641Alarm 2 } wtWebGraphAnalogIn57641AlarmIfEntry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641AlarmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the alarms." INDEX { wtWebGraphAnalogIn57641AlarmNo } ::= { wtWebGraphAnalogIn57641AlarmIfTable 1 } WtWebGraphAnalogIn57641AlarmIfEntry ::= SEQUENCE { wtWebGraphAnalogIn57641AlarmNo INTEGER } wtWebGraphAnalogIn57641AlarmNo OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Alarm number." ::= { wtWebGraphAnalogIn57641AlarmIfEntry 1 } -- Alarm Table wtWebGraphAnalogIn57641AlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the alarm number." ::= { wtWebGraphAnalogIn57641Alarm 3 } wtWebGraphAnalogIn57641AlarmEntry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Alarm parameters of the individual alarms." INDEX { wtWebGraphAnalogIn57641AlarmNo } ::= { wtWebGraphAnalogIn57641AlarmTable 1 } WtWebGraphAnalogIn57641AlarmEntry ::= SEQUENCE { wtWebGraphAnalogIn57641AlarmTrigger OCTET STRING, wtWebGraphAnalogIn57641AlarmMin OCTET STRING, wtWebGraphAnalogIn57641AlarmMax OCTET STRING, wtWebGraphAnalogIn57641AlarmHysteresis OCTET STRING, wtWebGraphAnalogIn57641AlarmDelay OCTET STRING, wtWebGraphAnalogIn57641AlarmInterval OCTET STRING, wtWebGraphAnalogIn57641AlarmEnable OCTET STRING, wtWebGraphAnalogIn57641AlarmEMailAddr OCTET STRING, wtWebGraphAnalogIn57641AlarmMailSubject OCTET STRING, wtWebGraphAnalogIn57641AlarmMailText OCTET STRING, wtWebGraphAnalogIn57641AlarmManagerIP OCTET STRING, wtWebGraphAnalogIn57641AlarmTrapText OCTET STRING, wtWebGraphAnalogIn57641AlarmMailOptions OCTET STRING, wtWebGraphAnalogIn57641AlarmTcpIpAddr OCTET STRING, wtWebGraphAnalogIn57641AlarmTcpPort INTEGER, wtWebGraphAnalogIn57641AlarmTcpText OCTET STRING, wtWebGraphAnalogIn57641AlarmClearMailSubject OCTET STRING, wtWebGraphAnalogIn57641AlarmClearMailText OCTET STRING, wtWebGraphAnalogIn57641AlarmClearTrapText OCTET STRING, wtWebGraphAnalogIn57641AlarmClearTcpText OCTET STRING, wtWebGraphAnalogIn57641Alarm2Min OCTET STRING, wtWebGraphAnalogIn57641Alarm2Max OCTET STRING, wtWebGraphAnalogIn57641Alarm2Hysteresis OCTET STRING, wtWebGraphAnalogIn57641AlarmSyslogIpAddr OCTET STRING, wtWebGraphAnalogIn57641AlarmSyslogPort INTEGER, wtWebGraphAnalogIn57641AlarmSyslogText OCTET STRING, wtWebGraphAnalogIn57641AlarmSyslogClearText OCTET STRING, wtWebGraphAnalogIn57641AlarmFtpDataPort OCTET STRING, wtWebGraphAnalogIn57641AlarmFtpFileName OCTET STRING, wtWebGraphAnalogIn57641AlarmFtpText OCTET STRING, wtWebGraphAnalogIn57641AlarmFtpClearText OCTET STRING, wtWebGraphAnalogIn57641AlarmFtpOption OCTET STRING, wtWebGraphAnalogIn57641AlarmTimerCron OCTET STRING } wtWebGraphAnalogIn57641AlarmTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalogIn57641AlarmEntry 1 } wtWebGraphAnalogIn57641AlarmMin OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Minimum temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641AlarmEntry 2 } wtWebGraphAnalogIn57641AlarmMax OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Maximum temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641AlarmEntry 3 } wtWebGraphAnalogIn57641AlarmHysteresis OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641AlarmEntry 4 } wtWebGraphAnalogIn57641AlarmDelay OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes)." ::= { wtWebGraphAnalogIn57641AlarmEntry 5 } wtWebGraphAnalogIn57641AlarmInterval OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Send interval for alarm messages." ::= { wtWebGraphAnalogIn57641AlarmEntry 6 } wtWebGraphAnalogIn57641AlarmEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable" ::= { wtWebGraphAnalogIn57641AlarmEntry 7 } wtWebGraphAnalogIn57641AlarmEMailAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "E-Mail address for sending the alarm mail to." ::= { wtWebGraphAnalogIn57641AlarmEntry 8 } wtWebGraphAnalogIn57641AlarmMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm mail." ::= { wtWebGraphAnalogIn57641AlarmEntry 9 } wtWebGraphAnalogIn57641AlarmMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm mail text: provides the current temperature; n = 1..8. provides the current time." ::= { wtWebGraphAnalogIn57641AlarmEntry 10 } wtWebGraphAnalogIn57641AlarmManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the SNMP Manager which accepts the trap." ::= { wtWebGraphAnalogIn57641AlarmEntry 11 } wtWebGraphAnalogIn57641AlarmTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalogIn57641AlarmEntry 12 } wtWebGraphAnalogIn57641AlarmMailOptions OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused" ::= { wtWebGraphAnalogIn57641AlarmEntry 13 } wtWebGraphAnalogIn57641AlarmTcpIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the trap." ::= { wtWebGraphAnalogIn57641AlarmEntry 14 } wtWebGraphAnalogIn57641AlarmTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the TCP server which accepts the trap." ::= { wtWebGraphAnalogIn57641AlarmEntry 15 } wtWebGraphAnalogIn57641AlarmTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalogIn57641AlarmEntry 16 } wtWebGraphAnalogIn57641AlarmClearMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm clear mail." ::= { wtWebGraphAnalogIn57641AlarmEntry 17 } wtWebGraphAnalogIn57641AlarmClearMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time." ::= { wtWebGraphAnalogIn57641AlarmEntry 18 } wtWebGraphAnalogIn57641AlarmClearTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalogIn57641AlarmEntry 19 } wtWebGraphAnalogIn57641AlarmClearTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalogIn57641AlarmEntry 20 } wtWebGraphAnalogIn57641Alarm2Min OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Minimum rel. Humidity in percent with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641AlarmEntry 21 } wtWebGraphAnalogIn57641Alarm2Max OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Maximum rel.Humidity in percent with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641AlarmEntry 22 } wtWebGraphAnalogIn57641Alarm2Hysteresis OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Hysterese rel. Humidity in percent with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641AlarmEntry 23 } wtWebGraphAnalogIn57641AlarmSyslogIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalogIn57641AlarmEntry 24 } wtWebGraphAnalogIn57641AlarmSyslogPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalogIn57641AlarmEntry 25 } wtWebGraphAnalogIn57641AlarmSyslogText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body." ::= { wtWebGraphAnalogIn57641AlarmEntry 26 } wtWebGraphAnalogIn57641AlarmSyslogClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message." ::= { wtWebGraphAnalogIn57641AlarmEntry 27 } wtWebGraphAnalogIn57641AlarmFtpDataPort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Local data port: 1..65535 or AUTO: the next free port will be assigned." ::= { wtWebGraphAnalogIn57641AlarmEntry 28 } wtWebGraphAnalogIn57641AlarmFtpFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file including path informations." ::= { wtWebGraphAnalogIn57641AlarmEntry 29 } wtWebGraphAnalogIn57641AlarmFtpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Message text to store on the FTP server." ::= { wtWebGraphAnalogIn57641AlarmEntry 30 } wtWebGraphAnalogIn57641AlarmFtpClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm clear message to store on the FTP server." ::= { wtWebGraphAnalogIn57641AlarmEntry 31 } wtWebGraphAnalogIn57641AlarmFtpOption OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused" ::= { wtWebGraphAnalogIn57641AlarmEntry 32 } wtWebGraphAnalogIn57641AlarmTimerCron OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute)." ::= { wtWebGraphAnalogIn57641AlarmEntry 33 } -- wtWebGraphAnalogIn57641GraphicsBase Group ---------------------------- wtWebGraphAnalogIn57641GraphicsBaseEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused" ::= { wtWebGraphAnalogIn57641GraphicsBase 1 } wtWebGraphAnalogIn57641GraphicsBaseWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the width of the graphic in pixels." ::= { wtWebGraphAnalogIn57641GraphicsBase 2 } wtWebGraphAnalogIn57641GraphicsBaseHeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the height of the graphic in pixels." ::= { wtWebGraphAnalogIn57641GraphicsBase 3 } wtWebGraphAnalogIn57641GraphicsBaseFrameColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Frame color definition in RGB." ::= { wtWebGraphAnalogIn57641GraphicsBase 4 } wtWebGraphAnalogIn57641GraphicsBaseBackgroundColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Background color definition in RGB." ::= { wtWebGraphAnalogIn57641GraphicsBase 5 } wtWebGraphAnalogIn57641GraphicsBasePollingrate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic." ::= { wtWebGraphAnalogIn57641GraphicsBase 6 } -- wtWebGraphAnalogIn57641GraphicsSelect Group ---------------------------- wtWebGraphAnalogIn57641GraphicsSelectDisplaySensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8" ::= { wtWebGraphAnalogIn57641GraphicsSelect 1 } wtWebGraphAnalogIn57641GraphicsSelectDisplayShowExtrem OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8" ::= { wtWebGraphAnalogIn57641GraphicsSelect 2 } -- Graph Sensor Color Table wtWebGraphAnalogIn57641SensorColor2Table OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641SensorColor2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor colors for the praphical presentation." ::= { wtWebGraphAnalogIn57641GraphicsSelect 3 } wtWebGraphAnalogIn57641SensorColor2Entry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641SensorColor2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the sensors." INDEX { wtWebGraphAnalogIn57641SensorNo } ::= { wtWebGraphAnalogIn57641SensorColor2Table 1 } WtWebGraphAnalogIn57641SensorColor2Entry ::= SEQUENCE { wtWebGraphAnalogIn57641GraphicsSensorColor OCTET STRING, wtWebGraphAnalogIn57641GraphicsSelectScale OCTET STRING } wtWebGraphAnalogIn57641GraphicsSensorColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Color of the sensors at the praphical presention." ::= { wtWebGraphAnalogIn57641SensorColor2Entry 1 } wtWebGraphAnalogIn57641GraphicsSelectScale OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 Bit 4-7: unused" ::= { wtWebGraphAnalogIn57641SensorColor2Entry 2 } -- wtWebGraphAnalogIn57641GraphicsScale Group ---------------------------- wtWebGraphAnalogIn57641GraphicsScaleAutoScaleEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3 : Scale 4 Auto scale enable Bit 4-7: unused" ::= { wtWebGraphAnalogIn57641GraphicsScale 1 } wtWebGraphAnalogIn57641GraphicsScaleAutoFitEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3 : Scale 4 Auto fit enable Bit 4-7: unused" ::= { wtWebGraphAnalogIn57641GraphicsScale 2 } wtWebGraphAnalogIn57641GraphicsScale1Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Minimum." ::= { wtWebGraphAnalogIn57641GraphicsScale 3 } wtWebGraphAnalogIn57641GraphicsScale2Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Minimum." ::= { wtWebGraphAnalogIn57641GraphicsScale 4 } wtWebGraphAnalogIn57641GraphicsScale3Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 3: Minimum." ::= { wtWebGraphAnalogIn57641GraphicsScale 5 } wtWebGraphAnalogIn57641GraphicsScale4Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 4: Minimum." ::= { wtWebGraphAnalogIn57641GraphicsScale 6 } wtWebGraphAnalogIn57641GraphicsScale1Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Maximum." ::= { wtWebGraphAnalogIn57641GraphicsScale 7 } wtWebGraphAnalogIn57641GraphicsScale2Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Maximum." ::= { wtWebGraphAnalogIn57641GraphicsScale 8 } wtWebGraphAnalogIn57641GraphicsScale3Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 3: Maximum." ::= { wtWebGraphAnalogIn57641GraphicsScale 9 } wtWebGraphAnalogIn57641GraphicsScale4Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 4: Maximum." ::= { wtWebGraphAnalogIn57641GraphicsScale 10 } wtWebGraphAnalogIn57641GraphicsScale1Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Unit." ::= { wtWebGraphAnalogIn57641GraphicsScale 11 } wtWebGraphAnalogIn57641GraphicsScale2Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Unit." ::= { wtWebGraphAnalogIn57641GraphicsScale 12 } wtWebGraphAnalogIn57641GraphicsScale3Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 3: Unit." ::= { wtWebGraphAnalogIn57641GraphicsScale 13 } wtWebGraphAnalogIn57641GraphicsScale4Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 4: Unit." ::= { wtWebGraphAnalogIn57641GraphicsScale 14 } -- wtWebGraphAnalogIn57641Ports Group ---------------------------- -- Table wtWebGraphAnalogIn57641PortTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalogIn57641PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the sensor number." ::= { wtWebGraphAnalogIn57641Ports 1 } wtWebGraphAnalogIn57641PortEntry OBJECT-TYPE SYNTAX WtWebGraphAnalogIn57641PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Sensor parameters for the individual sensors." INDEX { wtWebGraphAnalogIn57641SensorNo } ::= { wtWebGraphAnalogIn57641PortTable 1 } WtWebGraphAnalogIn57641PortEntry ::= SEQUENCE { wtWebGraphAnalogIn57641PortName OCTET STRING, wtWebGraphAnalogIn57641PortText OCTET STRING, wtWebGraphAnalogIn57641PortOffset1 OCTET STRING, wtWebGraphAnalogIn57641SetPoint1 OCTET STRING, wtWebGraphAnalogIn57641PortOffset2 OCTET STRING, wtWebGraphAnalogIn57641SetPoint2 OCTET STRING, wtWebGraphAnalogIn57641PortComment OCTET STRING, wtWebGraphAnalogIn57641PortSensorSelect OCTET STRING, wtWebGraphAnalogIn57641PortUnit OCTET STRING, wtWebGraphAnalogIn57641PortScale0 OCTET STRING, wtWebGraphAnalogIn57641PortScale100 OCTET STRING } wtWebGraphAnalogIn57641PortName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the sensor." ::= { wtWebGraphAnalogIn57641PortEntry 1 } wtWebGraphAnalogIn57641PortText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the sensor." ::= { wtWebGraphAnalogIn57641PortEntry 2 } wtWebGraphAnalogIn57641PortOffset1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1." ::= { wtWebGraphAnalogIn57641PortEntry 3 } wtWebGraphAnalogIn57641SetPoint1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: set point 1 in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641PortEntry 4 } wtWebGraphAnalogIn57641PortOffset2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2." ::= { wtWebGraphAnalogIn57641PortEntry 5 } wtWebGraphAnalogIn57641SetPoint2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: set point 2 in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalogIn57641PortEntry 6 } wtWebGraphAnalogIn57641PortComment OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: informations of date, name of operator, reference devices." ::= { wtWebGraphAnalogIn57641PortEntry 7 } wtWebGraphAnalogIn57641PortSensorSelect OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused Binary coded options for sensor 2: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused" ::= { wtWebGraphAnalogIn57641PortEntry 8 } wtWebGraphAnalogIn57641PortUnit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed unit." ::= { wtWebGraphAnalogIn57641PortEntry 9 } wtWebGraphAnalogIn57641PortScale0 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999" ::= { wtWebGraphAnalogIn57641PortEntry 10 } wtWebGraphAnalogIn57641PortScale100 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999" ::= { wtWebGraphAnalogIn57641PortEntry 11 } -- wtWebGraphAnalogIn57641Manufact Group ---------------------------- wtWebGraphAnalogIn57641MfName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer company name" ::= { wtWebGraphAnalogIn57641Manufact 1 } wtWebGraphAnalogIn57641MfAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer address." ::= { wtWebGraphAnalogIn57641Manufact 2 } wtWebGraphAnalogIn57641MfHotline OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer hotline." ::= { wtWebGraphAnalogIn57641Manufact 3 } wtWebGraphAnalogIn57641MfInternet OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer Internet address." ::= { wtWebGraphAnalogIn57641Manufact 4 } wtWebGraphAnalogIn57641MfDeviceTyp OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer device name (model number)." ::= { wtWebGraphAnalogIn57641Manufact 5 } wtWebGraphAnalogIn57641MfOrderNo OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer part number." ::= { wtWebGraphAnalogIn57641Manufact 6 } -- wtWebGraphAnalogIn57641Diag Group ---------------------------- wtWebGraphAnalogIn57641DiagErrorCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries in the error memory." ::= { wtWebGraphAnalogIn57641Diag 1 } wtWebGraphAnalogIn57641DiagBinaryError OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Error causes coded bit-by-bit." ::= { wtWebGraphAnalogIn57641Diag 2 } wtWebGraphAnalogIn57641DiagErrorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this variable is used as an index to read an error massege from wtWebGraphAnalogIn57641DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalogIn57641DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalogIn57641DiagErrorMessage." ::= { wtWebGraphAnalogIn57641Diag 3 } wtWebGraphAnalogIn57641DiagErrorMessage OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Using wtWebGraphAnalogIn57641DiagErrorIndex as an index, the appropriate message is available." ::= { wtWebGraphAnalogIn57641Diag 4 } wtWebGraphAnalogIn57641DiagErrorClear OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Writing 1 into this variable clears all diagnosis messages." ::= { wtWebGraphAnalogIn57641Diag 5 } -- TRAP DEFINITIONS -- Diese SNMP-Traps werden gesendet, wenn die Alarmtriggerbedingungen zutreffen wtWebGraphAnalogIn57641Alert1 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 1" --#SUMMARY "Alarm 1: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 31 wtWebGraphAnalogIn57641Alert2 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 2" --#SUMMARY "Alarm 2: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 32 wtWebGraphAnalogIn57641Alert3 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 3" --#SUMMARY "Alarm 3: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 33 wtWebGraphAnalogIn57641Alert4 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 4" --#SUMMARY "Alarm 4: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 34 wtWebGraphAnalogIn57641Alert5 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 5" --#SUMMARY "Alarm 5: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 35 wtWebGraphAnalogIn57641Alert6 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 6" --#SUMMARY "Alarm 6: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 36 wtWebGraphAnalogIn57641Alert7 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 7" --#SUMMARY "Alarm 7: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 37 wtWebGraphAnalogIn57641Alert8 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Alarm 8" --#SUMMARY "Alarm 8: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 38 wtWebGraphAnalogIn57641Alert9 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 1" --#SUMMARY "Release Alarm 1: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 91 wtWebGraphAnalogIn57641Alert10 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 2" --#SUMMARY "Release Alarm 2: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 92 wtWebGraphAnalogIn57641Alert11 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 3" --#SUMMARY "Release Alarm 3: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 93 wtWebGraphAnalogIn57641Alert12 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 4" --#SUMMARY "Release Alarm 4: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 94 wtWebGraphAnalogIn57641Alert13 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 5" --#SUMMARY "Release Alarm 5: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 95 wtWebGraphAnalogIn57641Alert14 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 6" --#SUMMARY "Release Alarm 6: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 96 wtWebGraphAnalogIn57641Alert15 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 7" --#SUMMARY "Release Alarm 7: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 97 wtWebGraphAnalogIn57641Alert16 TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Release Alarm 8" --#SUMMARY "Release Alarm 8: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 98 wtWebGraphAnalogIn57641AlertDiag TRAP-TYPE ENTERPRISE wtWebGraphAnalogIn57641 VARIABLES { wtWebGraphAnalogIn57641DiagErrorIndex, wtWebGraphAnalogIn57641DiagErrorMessage } DESCRIPTION "This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Thermo-Hygrometer Diagnose Error" --#SUMMARY "Diagnose error index: %d, Message: %s." --#ARGUMENTS {0,1} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 110 END