All MIBs › WebGraph-AnalogIn-57641-US-MIB › wtWebioAn1MailEnable
wtWebioAn1MailEnable
Module: WebGraph-AnalogIn-57641-US-MIB
OID (symbolic): WebGraph-AnalogIn-57641-US-MIB::wtWebioAn1MailEnable
OID (numeric): 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
What is wtWebioAn1MailEnable?
A bitmask whose bit 0, when set, enables the device to send email at all -- master switch for the alarm-mail feature. Note: this object's name ('wtWebioAn1...') breaks from the wtWebGraphAnalogIn57641* naming convention used by every other object in this MIB, strongly suggesting it was copied over from a related 'WebIO' product's MIB module without being renamed; its OID slot (wtWebGraphAnalogIn57641Mail.4) and DESCRIPTION are otherwise consistent with this device's own mail-configuration table, so its real function here is not in doubt.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4 snmpwalk -v2c -c public <target> WebGraph-AnalogIn-57641-US-MIB::wtWebioAn1MailEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4.1 snmpget -v2c -c public <target> WebGraph-AnalogIn-57641-US-MIB::wtWebioAn1MailEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4.1 s <value>
Start monitoring WebGraph AnalogIn-57641 networked analog sensor interface (channel reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIn-57641-US-MIB::wtWebioAn1MailEnable OID value, configure state conditions and alerts, and monitor any WebGraph AnalogIn-57641 networked analog sensor interface (channel reading/threshold-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.10 | wtWebGraphAnalogIn57641 | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3 | wtWebGraphAnalogIn57641Config | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1 | wtWebGraphAnalogIn57641Device | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3 | wtWebGraphAnalogIn57641Basic | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3 | wtWebGraphAnalogIn57641Mail | WebGraph-AnalogIn-57641-US-MIB |
| 1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4 | wtWebioAn1MailEnable | WebGraph-AnalogIn-57641-US-MIB |