WebGraph-AnalogIn-57643-US-MIB

All MIBs › WebGraph-AnalogIn-57643-US-MIB

Category: Power and Environmental Monitoring

Description: Monitors WebGraph model 57643 analog input sensor channels, measured values, and configurable alarm limits.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WebGraph-AnalogIn-57643-US-MIB?

This is a vendor-specific proprietary MIB from WebGraph for its model 57643 analog input sensor interface, a companion product to the 57641 in WebGraph's networked telemetry appliance line. It exposes objects for enumerating analog input channels, their scaled measured values, per-channel binary alarm states, and session/configuration access controls (password and config-mode flag). It supports hardware status monitoring by surfacing live channel readings and threshold-alarm transitions, and it supports basic software/session status monitoring via the configuration-mode indicator. There is no documented dependency on other MIBs; the objects live entirely under WebGraph's proprietary enterprise tree. It is typically deployed as a small networked sensor interface monitoring analog signals (voltage, current, or contact inputs) in equipment rooms or industrial/telecom cabinets, and its objects are commonly explored using a WebGraph-AnalogIn-57643-US-MIB MIB Browser before integrating them into an NMS.

IPNetwork Monitor allows you to monitor SNMP objects defined in WebGraph-AnalogIn-57643-US-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

WebGraph AnalogIn-57643 networked analog sensor interface

Monitoring Examples

An operator would poll wtWebGraphAnalogIn57643SensorTable/Entry (indexed by wtWebGraphAnalogIn57643SensorNo) to enumerate channels and wtWebGraphAnalogIn57643ValuesTable/Entry to retrieve the current scaled value per channel. wtWebGraphAnalogIn57643BinaryValuesTable exposes a per-channel alarm flag that trips when a value crosses its configured threshold, for example detecting a door-contact sensor opening or a voltage rail drifting out of range. wtWebGraphAnalogIn57643SessCntrlConfigMode indicates whether the device is currently in a configuration session, useful for explaining a temporary gap in updated readings.

What Can Be Monitored

analog input channel count
per-channel scaled sensor value
binary threshold alarm state
device configuration-mode/session status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
NetworkAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
wut	1.3.6.1.4.1.5040
wtComServer	1.3.6.1.4.1.5040.1
wtWebio	1.3.6.1.4.1.5040.1.2
wtWebGraphAnalogIn57643	1.3.6.1.4.1.5040.1.2.12
NTF wtWebGraphAnalogIn57643Alert1	1.3.6.1.4.1.5040.1.2.12.0.31			This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert2	1.3.6.1.4.1.5040.1.2.12.0.32			This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert3	1.3.6.1.4.1.5040.1.2.12.0.33			This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert4	1.3.6.1.4.1.5040.1.2.12.0.34			This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert5	1.3.6.1.4.1.5040.1.2.12.0.35			This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert6	1.3.6.1.4.1.5040.1.2.12.0.36			This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert7	1.3.6.1.4.1.5040.1.2.12.0.37			This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert8	1.3.6.1.4.1.5040.1.2.12.0.38			This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert9	1.3.6.1.4.1.5040.1.2.12.0.91			This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert10	1.3.6.1.4.1.5040.1.2.12.0.92			This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert11	1.3.6.1.4.1.5040.1.2.12.0.93			This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert12	1.3.6.1.4.1.5040.1.2.12.0.94			This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert13	1.3.6.1.4.1.5040.1.2.12.0.95			This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert14	1.3.6.1.4.1.5040.1.2.12.0.96			This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert15	1.3.6.1.4.1.5040.1.2.12.0.97			This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643Alert16	1.3.6.1.4.1.5040.1.2.12.0.98			This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57643AlertDiag	1.3.6.1.4.1.5040.1.2.12.0.110			This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
wtWebGraphAnalogIn57643Inventory	1.3.6.1.4.1.5040.1.2.12.1
INT wtWebGraphAnalogIn57643Sensors	1.3.6.1.4.1.5040.1.2.12.1.1	INTEGER	read-only	Number of sensors
wtWebGraphAnalogIn57643SensorTable	1.3.6.1.4.1.5040.1.2.12.1.2		not-accessible	List of sensors.
wtWebGraphAnalogIn57643SensorEntry	1.3.6.1.4.1.5040.1.2.12.1.2.1		not-accessible	List of sensor numbers.
INT wtWebGraphAnalogIn57643SensorNo	1.3.6.1.4.1.5040.1.2.12.1.2.1.1	INTEGER	read-only	Sensor number.
wtWebGraphAnalogIn57643ValuesTable	1.3.6.1.4.1.5040.1.2.12.1.3		not-accessible	List of measurement values corresponding to the channel numbers.
wtWebGraphAnalogIn57643ValuesEntry	1.3.6.1.4.1.5040.1.2.12.1.3.1		not-accessible	Measurement values of the sensors.
OCT wtWebGraphAnalogIn57643Values	1.3.6.1.4.1.5040.1.2.12.1.3.1.1	OCTET STRING	read-only	Measurement value of the sensor, ASCII, 7 characters in length.
wtWebGraphAnalogIn57643BinaryValuesTable	1.3.6.1.4.1.5040.1.2.12.1.4		not-accessible	List of binary measurement values corresponding to the channel numbers.
wtWebGraphAnalogIn57643BinaryValuesEntry	1.3.6.1.4.1.5040.1.2.12.1.4.1		not-accessible	Binary measurement values of the sensors.
INT wtWebGraphAnalogIn57643BinaryValues	1.3.6.1.4.1.5040.1.2.12.1.4.1.1	INTEGER	read-only	Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.
wtWebGraphAnalogIn57643SessCntrl	1.3.6.1.4.1.5040.1.2.12.2
OCT wtWebGraphAnalogIn57643SessCntrlPassword	1.3.6.1.4.1.5040.1.2.12.2.1	OCTET STRING	read-write	Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalogIn57643SessCntrlLogout. When read this variable provides a string of length zero.
INT wtWebGraphAnalogIn57643SessCntrlConfigMode	1.3.6.1.4.1.5040.1.2.12.2.2	INTEGER	read-only	When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
INT wtWebGraphAnalogIn57643SessCntrlLogout	1.3.6.1.4.1.5040.1.2.12.2.3	INTEGER	read-write	If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
OCT wtWebGraphAnalogIn57643SessCntrlAdminPassword	1.3.6.1.4.1.5040.1.2.12.2.4	OCTET STRING	read-write	This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
OCT wtWebGraphAnalogIn57643SessCntrlConfigPassword	1.3.6.1.4.1.5040.1.2.12.2.5	OCTET STRING	read-write	This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
wtWebGraphAnalogIn57643Config	1.3.6.1.4.1.5040.1.2.12.3
wtWebGraphAnalogIn57643Device	1.3.6.1.4.1.5040.1.2.12.3.1
wtWebGraphAnalogIn57643Text	1.3.6.1.4.1.5040.1.2.12.3.1.1
OCT wtWebGraphAnalogIn57643DeviceName	1.3.6.1.4.1.5040.1.2.12.3.1.1.1	OCTET STRING	read-write	Name of the Webio, which is user definable.
OCT wtWebGraphAnalogIn57643DeviceText	1.3.6.1.4.1.5040.1.2.12.3.1.1.2	OCTET STRING	read-write	Description of the Webio, which is user definable.
OCT wtWebGraphAnalogIn57643DeviceLocation	1.3.6.1.4.1.5040.1.2.12.3.1.1.3	OCTET STRING	read-write	Description of the location of the Webio, which is user definable.
OCT wtWebGraphAnalogIn57643DeviceContact	1.3.6.1.4.1.5040.1.2.12.3.1.1.4	OCTET STRING	read-write	Contact address of the system operator of the Webio, which is user definable.
wtWebGraphAnalogIn57643TimeDate	1.3.6.1.4.1.5040.1.2.12.3.1.2
wtWebGraphAnalogIn57643TimeZone	1.3.6.1.4.1.5040.1.2.12.3.1.2.1
INT wtWebGraphAnalogIn57643TzOffsetHrs	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.1	INTEGER	read-write	Offset hours for the time zone (winter time) with respect to UTC.
INT wtWebGraphAnalogIn57643TzOffsetMin	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.2	INTEGER	read-write	Offset minutes for the time zone (winter time) with respect to UTC.
OCT wtWebGraphAnalogIn57643TzEnable	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
INT wtWebGraphAnalogIn57643StTzOffsetHrs	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.4	INTEGER	read-write	Offset hours of the time zone (summer time) with respect to UTC.
INT wtWebGraphAnalogIn57643StTzOffsetMin	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.5	INTEGER	read-write	Offset minutes of the time zone (summer time) with respect to UTC.
OCT wtWebGraphAnalogIn57643StTzEnable	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.6	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
INT wtWebGraphAnalogIn57643StTzStartMonth	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.7	INTEGER	read-write	Month in which the change is made from winter time to summer time.
INT wtWebGraphAnalogIn57643StTzStartMode	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.8	INTEGER	read-write	Mode of the day of the week for which the change is made from winter time to summer time.
INT wtWebGraphAnalogIn57643StTzStartWday	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.9	INTEGER	read-write	Day of the week on which the change is made from winter time to summer time
INT wtWebGraphAnalogIn57643StTzStartHrs	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.10	INTEGER	read-write	Hour in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphAnalogIn57643StTzStartMin	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.11	INTEGER	read-write	Minute in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphAnalogIn57643StTzStopMonth	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.12	INTEGER	read-write	Month in which the change is made from summer time to winter time.
INT wtWebGraphAnalogIn57643StTzStopMode	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.13	INTEGER	read-write	Mode of the week day on which the change is made from summer time to winter time.
INT wtWebGraphAnalogIn57643StTzStopWday	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.14	INTEGER	read-write	Day of the week on which the change is made from summer time to winter time.
INT wtWebGraphAnalogIn57643StTzStopHrs	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.15	INTEGER	read-write	Hour at which the time zone is changed from summer to winter time with respect to UTC.
INT wtWebGraphAnalogIn57643StTzStopMin	1.3.6.1.4.1.5040.1.2.12.3.1.2.1.16	INTEGER	read-write	Minute at which the time zone is changed from summer to winter time with respect to UTC.
wtWebGraphAnalogIn57643TimeServer	1.3.6.1.4.1.5040.1.2.12.3.1.2.2
OCT wtWebGraphAnalogIn57643TimeServer1	1.3.6.1.4.1.5040.1.2.12.3.1.2.2.1	OCTET STRING	read-write	IP address or name of the 1st time server in ASCII
OCT wtWebGraphAnalogIn57643TimeServer2	1.3.6.1.4.1.5040.1.2.12.3.1.2.2.2	OCTET STRING	read-write	IP address or name of the 2nd time server in ASCII
OCT wtWebGraphAnalogIn57643TsEnable	1.3.6.1.4.1.5040.1.2.12.3.1.2.2.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
INT wtWebGraphAnalogIn57643TsSyncTime	1.3.6.1.4.1.5040.1.2.12.3.1.2.2.4	INTEGER	read-write	Daily synchronisation time with the time server (hour: 0-23).
wtWebGraphAnalogIn57643DeviceClock	1.3.6.1.4.1.5040.1.2.12.3.1.2.3
INT wtWebGraphAnalogIn57643ClockHrs	1.3.6.1.4.1.5040.1.2.12.3.1.2.3.1	INTEGER	read-write	Clock hours taking into account the time zone settings.
INT wtWebGraphAnalogIn57643ClockMin	1.3.6.1.4.1.5040.1.2.12.3.1.2.3.2	INTEGER	read-write	Clock minutes taking into account the time zone settings.
INT wtWebGraphAnalogIn57643ClockDay	1.3.6.1.4.1.5040.1.2.12.3.1.2.3.3	INTEGER	read-write	Date: Day of the month, taking into account the time zone settings.
INT wtWebGraphAnalogIn57643ClockMonth	1.3.6.1.4.1.5040.1.2.12.3.1.2.3.4	INTEGER	read-write	Date: Month, taking into account the time zone settings.
INT wtWebGraphAnalogIn57643ClockYear	1.3.6.1.4.1.5040.1.2.12.3.1.2.3.5	INTEGER	read-write	Date: Year, taking into account the time zone settings.
wtWebGraphAnalogIn57643Basic	1.3.6.1.4.1.5040.1.2.12.3.1.3
wtWebGraphAnalogIn57643Network	1.3.6.1.4.1.5040.1.2.12.3.1.3.1
IP wtWebGraphAnalogIn57643IpAddress	1.3.6.1.4.1.5040.1.2.12.3.1.3.1.1	IpAddress	read-write	IP address of the Webio
IP wtWebGraphAnalogIn57643SubnetMask	1.3.6.1.4.1.5040.1.2.12.3.1.3.1.2	IpAddress	read-write	Subnet mask of the Webio
IP wtWebGraphAnalogIn57643Gateway	1.3.6.1.4.1.5040.1.2.12.3.1.3.1.3	IpAddress	read-write	Gateway of the Webio
OCT wtWebGraphAnalogIn57643DnsServer1	1.3.6.1.4.1.5040.1.2.12.3.1.3.1.4	OCTET STRING	read-write	IP address of the 1st DNS server in ASCII
OCT wtWebGraphAnalogIn57643DnsServer2	1.3.6.1.4.1.5040.1.2.12.3.1.3.1.5	OCTET STRING	read-write	IP address of the 2nd DNS server in ASCII
OCT wtWebGraphAnalogIn57643AddConfig	1.3.6.1.4.1.5040.1.2.12.3.1.3.1.6	OCTET STRING	read-write	Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable
wtWebGraphAnalogIn57643HTTP	1.3.6.1.4.1.5040.1.2.12.3.1.3.2
OCT wtWebGraphAnalogIn57643Startup	1.3.6.1.4.1.5040.1.2.12.3.1.3.2.1	OCTET STRING	read-write	Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
OCT wtWebGraphAnalogIn57643GetHeaderEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.2.2	OCTET STRING	read-write	If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
INT wtWebGraphAnalogIn57643HttpPort	1.3.6.1.4.1.5040.1.2.12.3.1.3.2.3	INTEGER	read-write	Definition of the standard HTML port (Default: 80).
wtWebGraphAnalogIn57643Mail	1.3.6.1.4.1.5040.1.2.12.3.1.3.3
OCT wtWebGraphAnalogIn57643MailAdName	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.1	OCTET STRING	read-write	Device name for mail administration.
OCT wtWebGraphAnalogIn57643MailReply	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.2	OCTET STRING	read-write	Reply address for the mail server.
OCT wtWebGraphAnalogIn57643MailServer	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.3	OCTET STRING	read-write	Name or IP address of the mail server.
OCT wtWebioAn1MailEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.4	OCTET STRING	read-write	Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
OCT wtWebGraphAnalogIn57643MailAuthentication	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.5	OCTET STRING	read-write	Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
OCT wtWebGraphAnalogIn57643MailAuthUser	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.6	OCTET STRING	read-write	Name of the user to be authenticated.
OCT wtWebGraphAnalogIn57643MailAuthPassword	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.7	OCTET STRING	read-write	Authentication password.
OCT wtWebGraphAnalogIn57643MailPop3Server	1.3.6.1.4.1.5040.1.2.12.3.1.3.3.8	OCTET STRING	read-write	Name or Ip-address of the POP3 Servers.
wtWebGraphAnalogIn57643SNMP	1.3.6.1.4.1.5040.1.2.12.3.1.3.4
OCT wtWebGraphAnalogIn57643SnmpCommunityStringRead	1.3.6.1.4.1.5040.1.2.12.3.1.3.4.1	OCTET STRING	read-write	Community string read only
OCT wtWebGraphAnalogIn57643SnmpCommunityStringReadWrite	1.3.6.1.4.1.5040.1.2.12.3.1.3.4.2	OCTET STRING	read-write	Community string read / write
OCT wtWebGraphAnalogIn57643SystemTrapManagerIP	1.3.6.1.4.1.5040.1.2.12.3.1.3.4.3	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the system trap.
OCT wtWebGraphAnalogIn57643SystemTrapEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.4.4	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
OCT wtWebGraphAnalogIn57643SnmpEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.4.5	OCTET STRING	read-write	Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
OCT wtWebGraphAnalogIn57643SnmpCommunityStringTrap	1.3.6.1.4.1.5040.1.2.12.3.1.3.4.6	OCTET STRING	read-write	Community string send within traps.
wtWebGraphAnalogIn57643UDP	1.3.6.1.4.1.5040.1.2.12.3.1.3.5
INT wtWebGraphAnalogIn57643UdpPort	1.3.6.1.4.1.5040.1.2.12.3.1.3.5.1	INTEGER	read-write	Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
OCT wtWebGraphAnalogIn57643UdpEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.5.2	OCTET STRING	read-write	Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
wtWebGraphAnalogIn57643Syslog	1.3.6.1.4.1.5040.1.2.12.3.1.3.6
OCT wtWebGraphAnalogIn57643SyslogServerIP	1.3.6.1.4.1.5040.1.2.12.3.1.3.6.1	OCTET STRING	read-write	Name or IP address of the Syslog server, which accepts the Syslog messgaes.
INT wtWebGraphAnalogIn57643SyslogServerPort	1.3.6.1.4.1.5040.1.2.12.3.1.3.6.2	INTEGER	read-write	Portnumber of the Syslog servers, default 514.
OCT wtWebGraphAnalogIn57643SyslogSystemMessagesEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.6.3	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
OCT wtWebGraphAnalogIn57643SyslogEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.6.4	OCTET STRING	read-write	Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
wtWebGraphAnalogIn57643FTP	1.3.6.1.4.1.5040.1.2.12.3.1.3.7
OCT wtWebGraphAnalogIn57643FTPServerIP	1.3.6.1.4.1.5040.1.2.12.3.1.3.7.1	OCTET STRING	read-write	Name or IP address of the FTP server, which accepts the FTP messages.
INT wtWebGraphAnalogIn57643FTPServerControlPort	1.3.6.1.4.1.5040.1.2.12.3.1.3.7.2	INTEGER	read-write	Portnumber of the control port of the FTP server, default 21.
OCT wtWebGraphAnalogIn57643FTPUserName	1.3.6.1.4.1.5040.1.2.12.3.1.3.7.3	OCTET STRING	read-write	FTP Loggin: user name.
OCT wtWebGraphAnalogIn57643FTPPassword	1.3.6.1.4.1.5040.1.2.12.3.1.3.7.4	OCTET STRING	read-write	FTP Loggin: user password.
OCT wtWebGraphAnalogIn57643FTPAccount	1.3.6.1.4.1.5040.1.2.12.3.1.3.7.5	OCTET STRING	read-write	FTP Loggin: name of account.
OCT wtWebGraphAnalogIn57643FTPOption	1.3.6.1.4.1.5040.1.2.12.3.1.3.7.6	OCTET STRING	read-write	Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
OCT wtWebGraphAnalogIn57643FTPEnable	1.3.6.1.4.1.5040.1.2.12.3.1.3.7.7	OCTET STRING	read-write	Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
wtWebGraphAnalogIn57643Datalogger	1.3.6.1.4.1.5040.1.2.12.3.1.4
INT wtWebGraphAnalogIn57643LoggerTimebase	1.3.6.1.4.1.5040.1.2.12.3.1.4.1	INTEGER	read-write	Time base of the data logger
OCT wtWebGraphAnalogIn57643LoggerSensorSel	1.3.6.1.4.1.5040.1.2.12.3.1.4.2	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
OCT wtWebGraphAnalogIn57643DisplaySensorSel	1.3.6.1.4.1.5040.1.2.12.3.1.4.3	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
wtWebGraphAnalogIn57643SensorColorTable	1.3.6.1.4.1.5040.1.2.12.3.1.4.4		not-accessible	List of sensor colors for the praphical presentation.
wtWebGraphAnalogIn57643SensorColorEntry	1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1		not-accessible	Index numbers of the sensors.
OCT wtWebGraphAnalogIn57643SensorColor	1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1.1	OCTET STRING	read-write	Color of the sensors at the praphical presention.
OCT wtWebGraphAnalogIn57643AutoScaleEnable	1.3.6.1.4.1.5040.1.2.12.3.1.4.5	OCTET STRING	read-write	If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
OCT wtWebGraphAnalogIn57643VerticalUpperLimit	1.3.6.1.4.1.5040.1.2.12.3.1.4.6	OCTET STRING	read-write	This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643VerticalLowerLimit	1.3.6.1.4.1.5040.1.2.12.3.1.4.7	OCTET STRING	read-write	This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
INT wtWebGraphAnalogIn57643HorizontalZoom	1.3.6.1.4.1.5040.1.2.12.3.1.4.8	INTEGER	read-write	Defines the default zoom stage, if no auto scaling is selected.
wtWebGraphAnalogIn57643Alarm	1.3.6.1.4.1.5040.1.2.12.3.1.5
INT wtWebGraphAnalogIn57643AlarmCount	1.3.6.1.4.1.5040.1.2.12.3.1.5.1	INTEGER	read-only	Number of independent alarms.
wtWebGraphAnalogIn57643AlarmIfTable	1.3.6.1.4.1.5040.1.2.12.3.1.5.2		not-accessible	List of alarm indices.
wtWebGraphAnalogIn57643AlarmIfEntry	1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1		not-accessible	Numbers of the alarms.
INT wtWebGraphAnalogIn57643AlarmNo	1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1.1	INTEGER	read-only	Alarm number.
wtWebGraphAnalogIn57643AlarmTable	1.3.6.1.4.1.5040.1.2.12.3.1.5.3		not-accessible	List of settings depending on the alarm number.
wtWebGraphAnalogIn57643AlarmEntry	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1		not-accessible	Alarm parameters of the individual alarms.
OCT wtWebGraphAnalogIn57643AlarmTrigger	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.1	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
OCT wtWebGraphAnalogIn57643AlarmMin	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.2	OCTET STRING	read-write	Minimum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643AlarmMax	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.3	OCTET STRING	read-write	Maximum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643AlarmHysteresis	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.4	OCTET STRING	read-write	Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643AlarmDelay	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.5	OCTET STRING	read-write	Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
OCT wtWebGraphAnalogIn57643AlarmInterval	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.6	OCTET STRING	read-write	Send interval for alarm messages.
OCT wtWebGraphAnalogIn57643AlarmEnable	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.7	OCTET STRING	read-write	Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
OCT wtWebGraphAnalogIn57643AlarmEMailAddr	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.8	OCTET STRING	read-write	E-Mail address for sending the alarm mail to.
OCT wtWebGraphAnalogIn57643AlarmMailSubject	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.9	OCTET STRING	read-write	Subject line for alarm mail.
OCT wtWebGraphAnalogIn57643AlarmMailText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.10	OCTET STRING	read-write	Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphAnalogIn57643AlarmManagerIP	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.11	OCTET STRING	read-write	Name or IP address of the SNMP Manager which accepts the trap.
OCT wtWebGraphAnalogIn57643AlarmTrapText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.12	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphAnalogIn57643AlarmMailOptions	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.13	OCTET STRING	read-write	Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
OCT wtWebGraphAnalogIn57643AlarmTcpIpAddr	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.14	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the trap.
INT wtWebGraphAnalogIn57643AlarmTcpPort	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.15	INTEGER	read-write	Port number of the TCP server which accepts the trap.
OCT wtWebGraphAnalogIn57643AlarmTcpText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.16	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphAnalogIn57643AlarmClearMailSubject	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.17	OCTET STRING	read-write	Subject line for alarm clear mail.
OCT wtWebGraphAnalogIn57643AlarmClearMailText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.18	OCTET STRING	read-write	Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphAnalogIn57643AlarmClearTrapText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.19	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphAnalogIn57643AlarmClearTcpText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.20	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphAnalogIn57643Alarm2Min	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.21	OCTET STRING	read-write	Minimum rel. Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643Alarm2Max	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.22	OCTET STRING	read-write	Maximum rel.Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643Alarm2Hysteresis	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.23	OCTET STRING	read-write	Hysterese rel. Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643AlarmSyslogIpAddr	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.24	OCTET STRING	read-write	IP address of the syslog server to which the Webio device should send syslog messages.
INT wtWebGraphAnalogIn57643AlarmSyslogPort	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.25	INTEGER	read-write	Port number of the syslog server to which the Webio device should send syslog messages.
OCT wtWebGraphAnalogIn57643AlarmSyslogText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.26	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
OCT wtWebGraphAnalogIn57643AlarmSyslogClearText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.27	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.
OCT wtWebGraphAnalogIn57643AlarmFtpDataPort	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.28	OCTET STRING	read-write	Local data port: 1..65535 or AUTO: the next free port will be assigned.
OCT wtWebGraphAnalogIn57643AlarmFtpFileName	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.29	OCTET STRING	read-write	Name of the file including path informations.
OCT wtWebGraphAnalogIn57643AlarmFtpText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.30	OCTET STRING	read-write	Message text to store on the FTP server.
OCT wtWebGraphAnalogIn57643AlarmFtpClearText	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.31	OCTET STRING	read-write	Alarm clear message to store on the FTP server.
OCT wtWebGraphAnalogIn57643AlarmFtpOption	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.32	OCTET STRING	read-write	Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
OCT wtWebGraphAnalogIn57643AlarmTimerCron	1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.33	OCTET STRING	read-write	This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
wtWebGraphAnalogIn57643Graphics	1.3.6.1.4.1.5040.1.2.12.3.1.6
wtWebGraphAnalogIn57643GraphicsBase	1.3.6.1.4.1.5040.1.2.12.3.1.6.1
OCT wtWebGraphAnalogIn57643GraphicsBaseEnable	1.3.6.1.4.1.5040.1.2.12.3.1.6.1.1	OCTET STRING	read-write	Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
INT wtWebGraphAnalogIn57643GraphicsBaseWidth	1.3.6.1.4.1.5040.1.2.12.3.1.6.1.2	INTEGER	read-write	Defines the width of the graphic in pixels.
INT wtWebGraphAnalogIn57643GraphicsBaseHeight	1.3.6.1.4.1.5040.1.2.12.3.1.6.1.3	INTEGER	read-write	Defines the height of the graphic in pixels.
OCT wtWebGraphAnalogIn57643GraphicsBaseFrameColor	1.3.6.1.4.1.5040.1.2.12.3.1.6.1.4	OCTET STRING	read-write	Frame color definition in RGB.
OCT wtWebGraphAnalogIn57643GraphicsBaseBackgroundColor	1.3.6.1.4.1.5040.1.2.12.3.1.6.1.5	OCTET STRING	read-write	Background color definition in RGB.
INT wtWebGraphAnalogIn57643GraphicsBasePollingrate	1.3.6.1.4.1.5040.1.2.12.3.1.6.1.6	INTEGER	read-write	Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
wtWebGraphAnalogIn57643GraphicsSelect	1.3.6.1.4.1.5040.1.2.12.3.1.6.2
OCT wtWebGraphAnalogIn57643GraphicsSelectDisplaySensorSel	1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
OCT wtWebGraphAnalogIn57643GraphicsSelectDisplayShowExtrem	1.3.6.1.4.1.5040.1.2.12.3.1.6.2.2	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
wtWebGraphAnalogIn57643SensorColor2Table	1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3		not-accessible	List of sensor colors for the praphical presentation.
wtWebGraphAnalogIn57643SensorColor2Entry	1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1		not-accessible	Numbers of the sensors.
OCT wtWebGraphAnalogIn57643GraphicsSensorColor	1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.1	OCTET STRING	read-write	Color of the sensors at the praphical presention.
OCT wtWebGraphAnalogIn57643GraphicsSelectScale	1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.2	OCTET STRING	read-write	Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 Bit 4-7: unused
wtWebGraphAnalogIn57643GraphicsScale	1.3.6.1.4.1.5040.1.2.12.3.1.6.3
OCT wtWebGraphAnalogIn57643GraphicsScaleAutoScaleEnable	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.1	OCTET STRING	read-write	Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3 : Scale 4 Auto scale enable Bit 4-7: unused
OCT wtWebGraphAnalogIn57643GraphicsScaleAutoFitEnable	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.2	OCTET STRING	read-write	Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3 : Scale 4 Auto fit enable Bit 4-7: unused
INT wtWebGraphAnalogIn57643GraphicsScale1Min	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.3	INTEGER	read-only	Scale 1: Minimum.
INT wtWebGraphAnalogIn57643GraphicsScale2Min	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.4	INTEGER	read-only	Scale 2: Minimum.
INT wtWebGraphAnalogIn57643GraphicsScale3Min	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.5	INTEGER	read-only	Scale 3: Minimum.
INT wtWebGraphAnalogIn57643GraphicsScale4Min	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.6	INTEGER	read-only	Scale 4: Minimum.
INT wtWebGraphAnalogIn57643GraphicsScale1Max	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.7	INTEGER	read-only	Scale 1: Maximum.
INT wtWebGraphAnalogIn57643GraphicsScale2Max	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.8	INTEGER	read-only	Scale 2: Maximum.
INT wtWebGraphAnalogIn57643GraphicsScale3Max	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.9	INTEGER	read-only	Scale 3: Maximum.
INT wtWebGraphAnalogIn57643GraphicsScale4Max	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.10	INTEGER	read-only	Scale 4: Maximum.
OCT wtWebGraphAnalogIn57643GraphicsScale1Unit	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.11	OCTET STRING	read-only	Scale 1: Unit.
OCT wtWebGraphAnalogIn57643GraphicsScale2Unit	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.12	OCTET STRING	read-only	Scale 2: Unit.
OCT wtWebGraphAnalogIn57643GraphicsScale3Unit	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.13	OCTET STRING	read-only	Scale 3: Unit.
OCT wtWebGraphAnalogIn57643GraphicsScale4Unit	1.3.6.1.4.1.5040.1.2.12.3.1.6.3.14	OCTET STRING	read-only	Scale 4: Unit.
wtWebGraphAnalogIn57643Ports	1.3.6.1.4.1.5040.1.2.12.3.2
wtWebGraphAnalogIn57643PortTable	1.3.6.1.4.1.5040.1.2.12.3.2.1		not-accessible	List of settings depending on the sensor number.
wtWebGraphAnalogIn57643PortEntry	1.3.6.1.4.1.5040.1.2.12.3.2.1.1		not-accessible	Sensor parameters for the individual sensors.
OCT wtWebGraphAnalogIn57643PortName	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.1	OCTET STRING	read-write	Name of the sensor.
OCT wtWebGraphAnalogIn57643PortText	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.2	OCTET STRING	read-write	Description of the sensor.
OCT wtWebGraphAnalogIn57643PortOffset1	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.3	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1.
OCT wtWebGraphAnalogIn57643SetPoint1	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.4	OCTET STRING	read-write	Offset calibration: set point 1 in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643PortOffset2	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.5	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2.
OCT wtWebGraphAnalogIn57643SetPoint2	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.6	OCTET STRING	read-write	Offset calibration: set point 2 in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57643PortComment	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.7	OCTET STRING	read-write	Offset calibration: informations of date, name of operator, reference devices.
OCT wtWebGraphAnalogIn57643PortSensorSelect	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.8	OCTET STRING	read-write	Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused Binary coded options for sensor 2: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused
OCT wtWebGraphAnalogIn57643PortUnit	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.9	OCTET STRING	read-write	User scale: displayed unit.
OCT wtWebGraphAnalogIn57643PortScale0	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.10	OCTET STRING	read-write	User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999
OCT wtWebGraphAnalogIn57643PortScale100	1.3.6.1.4.1.5040.1.2.12.3.2.1.1.11	OCTET STRING	read-write	User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999
wtWebGraphAnalogIn57643Manufact	1.3.6.1.4.1.5040.1.2.12.3.3
OCT wtWebGraphAnalogIn57643MfName	1.3.6.1.4.1.5040.1.2.12.3.3.1	OCTET STRING	read-write	Manufacturer company name
OCT wtWebGraphAnalogIn57643MfAddr	1.3.6.1.4.1.5040.1.2.12.3.3.2	OCTET STRING	read-write	Manufacturer address.
OCT wtWebGraphAnalogIn57643MfHotline	1.3.6.1.4.1.5040.1.2.12.3.3.3	OCTET STRING	read-write	Manufacturer hotline.
OCT wtWebGraphAnalogIn57643MfInternet	1.3.6.1.4.1.5040.1.2.12.3.3.4	OCTET STRING	read-write	Manufacturer Internet address.
OCT wtWebGraphAnalogIn57643MfDeviceTyp	1.3.6.1.4.1.5040.1.2.12.3.3.5	OCTET STRING	read-write	Manufacturer device name (model number).
OCT wtWebGraphAnalogIn57643MfOrderNo	1.3.6.1.4.1.5040.1.2.12.3.3.6	OCTET STRING	read-write	Manufacturer part number.
wtWebGraphAnalogIn57643Diag	1.3.6.1.4.1.5040.1.2.12.4
INT wtWebGraphAnalogIn57643DiagErrorCount	1.3.6.1.4.1.5040.1.2.12.4.1	INTEGER	read-only	Number of entries in the error memory.
OCT wtWebGraphAnalogIn57643DiagBinaryError	1.3.6.1.4.1.5040.1.2.12.4.2	OCTET STRING	read-only	Error causes coded bit-by-bit.
INT wtWebGraphAnalogIn57643DiagErrorIndex	1.3.6.1.4.1.5040.1.2.12.4.3	INTEGER	read-write	The value of this variable is used as an index to read an error massege from wtWebGraphAnalogIn57643DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalogIn57643DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalogIn57643DiagErrorMessage.
OCT wtWebGraphAnalogIn57643DiagErrorMessage	1.3.6.1.4.1.5040.1.2.12.4.4	OCTET STRING	read-only	Using wtWebGraphAnalogIn57643DiagErrorIndex as an index, the appropriate message is available.
INT wtWebGraphAnalogIn57643DiagErrorClear	1.3.6.1.4.1.5040.1.2.12.4.5	INTEGER	write-only	Writing 1 into this variable clears all diagnosis messages.

RFC description

WebGraph analog input monitoring device for 0-10V measurements and data logging.

Start monitoring WebGraph AnalogIn-57643 networked analog sensor interface (channel reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WebGraph-AnalogIn-57643-US-MIB

What Is WebGraph-AnalogIn-57643-US-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description