WebGraph-AnalogIn-57641-US-MIB :: wtWebGraphAnalogIn57641SessCntrlLogout

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WebGraph-AnalogIn-57641-US-MIB › wtWebGraphAnalogIn57641SessCntrlLogout

wtWebGraphAnalogIn57641SessCntrlLogout

Module: WebGraph-AnalogIn-57641-US-MIB

OID (symbolic): WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641SessCntrlLogout

OID (numeric): 1.3.6.1.4.1.5040.1.2.10.2.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.

What is wtWebGraphAnalogIn57641SessCntrlLogout?

Write 1 to close the currently open configuration session and commit (store) all changes made during it, or write 2 to discard those changes instead; it always reads back as 0. This is the equivalent of a 'save and exit' vs. 'cancel' choice for the SNMP config session.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.10.2.3
snmpwalk -v2c -c public <target> WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641SessCntrlLogout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.10.2.3.1
snmpget -v2c -c public <target> WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641SessCntrlLogout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.10.2.3.1 i <value>

Start monitoring WebGraph AnalogIn-57641 networked analog sensor interface (channel reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIn-57641-US-MIB::wtWebGraphAnalogIn57641SessCntrlLogout OID value, configure state conditions and alerts, and monitor any WebGraph AnalogIn-57641 networked analog sensor interface (channel reading/threshold-alarm status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5040wutCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1wtComServerCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.2wtWebioWebGraph-8xThermometer-US-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5040.1.2.10wtWebGraphAnalogIn57641WebGraph-AnalogIn-57641-US-MIB
1.3.6.1.4.1.5040.1.2.10.2wtWebGraphAnalogIn57641SessCntrlWebGraph-AnalogIn-57641-US-MIB
1.3.6.1.4.1.5040.1.2.10.2.3wtWebGraphAnalogIn57641SessCntrlLogoutWebGraph-AnalogIn-57641-US-MIB