TIMETRA-SAS-PORT-MIB

All MIBs › TIMETRA-SAS-PORT-MIB

Organization: Alcatel

Last Updated: 2007-01-01

Category: Nokia SR OS / Alcatel-Lucent 7750 SR, Port and Interface Management

Description: Manages Nokia/Alcatel-Lucent 7210 SAS port configuration, Ethernet parameters, and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-SAS-PORT-MIB?

TIMETRA-SAS-PORT-MIB is a Nokia (Alcatel-Lucent) proprietary MIB for the 7210 SAS (Service Access Switch) product family, managing port-level Ethernet configuration such as split-horizon groups, uplink mode, and QoS policy assignment. It exposes configuration tables for split-horizon group definitions and per-port extensions, alongside dedicated statistics and notification object groups for port-level events. Its monitoring value centers on software/configuration status rather than raw sensors: portShgLastMgmtChange timestamps let an operator detect recent, possibly unauthorized, changes to a split-horizon group, while tmnxPortUplinkMode and the QoS-policy-ID objects confirm a port's operational role and policy assignment match intent, catching misconfiguration before it causes a service outage. It depends on and extends Nokia's core TIMETRA-PORT-MIB/chassis MIB framework, layering 7210 SAS-specific port semantics like split-horizon groups on top of the general port model. It is deployed on 7210 SAS access and aggregation switches in metro Ethernet and mobile-backhaul networks, and operators of these switches typically start with a TIMETRA-SAS-PORT-MIB download to load the module into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-SAS-PORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia (Alcatel-Lucent) 7210 SAS access/aggregation switches

Monitoring Examples

An operator queries portShgInfoTable to review configured split-horizon groups by portShgName and portShgInstanceId, confirming which ports share a group per portShgDescription. tmnxPortUplinkMode is checked on a given port to verify it is correctly set to network-uplink versus access, and tmnxPortAccessEgressQoSPolicyId/tmnxPortNetworkQoSPolicyId are compared across ports to ensure consistent QoS policy assignment. A recent portShgLastMgmtChange timestamp combined with an unexpected uplink-mode value would point to an unplanned reconfiguration causing a service disruption.

What Can Be Monitored

port split-horizon group membership
uplink vs access mode per port
access/network QoS policy assignment per port
split-horizon group last-management-change timestamp
port statistics and notification events

Imported Objects

From POWER-ETHERNET-MIB

pethPsePortDetectionStatus	OBJECT-TYPE
pethPsePortEntry	OBJECT-TYPE
pethPsePortIndex	OBJECT-TYPE
pethPsePortPowerClassifications	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowPointer
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

From TIMETRA-CHASSIS-MIB

TmnxAlarmState
TmnxMDAChanType
TmnxPortAdminStatus
tmnxChassisIndex	OBJECT-TYPE
tmnxChassisNotifyChassisId	OBJECT-TYPE
tmnxHwConformance	OBJECT-IDENTITY
tmnxHwNotification	OBJECT-IDENTITY
tmnxHwObjs	OBJECT-IDENTITY

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules

OBJECT-IDENTITY

From TIMETRA-PORT-MIB

tmnxDS1Entry	OBJECT-TYPE
tmnxDS1PortEntry	OBJECT-TYPE
tmnxPortEntry	OBJECT-TYPE
tmnxPortEtherEntry	OBJECT-TYPE
tmnxPortNotifyPortId	OBJECT-TYPE
tmnxPortPortID	OBJECT-TYPE

From TIMETRA-SAS-GLOBAL-MIB

timetraSASConfs	OBJECT-IDENTITY
timetraSASModules	OBJECT-IDENTITY
timetraSASNotifyPrefix	OBJECT-IDENTITY
timetraSASObjs	OBJECT-IDENTITY

From TIMETRA-TC-MIB

ServObjDesc
TFCName
TItemDescription
TItemLongDescription
TNamedItem
TNamedItemOrEmpty
TNetworkIngressMeterId
TPortSchedulerCIR
TPortSchedulerPIR
TQueueId
TmnxActionType
TmnxEncapVal
TmnxOperState
TmnxPortID
TmnxServId

How to Use in IPNetwork Monitor

Example using tmnxSASPortNetIngressFwdInProfPkts OID:

Select a Nokia access/aggregation switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxSASPortNetIngressFwdInProfPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports tmnxSASPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this meter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 aluCurrent1MinFreqOffsetMeanPpb	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.11	Integer32	read-only	The mean frequency offset from the local oscillator clock in parts per billion during the first interval.
U32 aluCurrent1MinFreqOffsetStdDevPpb	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.12	Unsigned32	read-only	The standard deviation of the frequency offset from the local oscillator clock in nano seconds during the first interval.
I32 aluCurrent1MinPhaseErrorMeanNs	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.10	Integer32	read-only	The mean of the phase error from the local oscillator clock in nano seconds during the first interval.
I32 aluCurrent1MinPhaseErrorMeanPpb	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.8	Integer32	read-only	The mean phase error from the local oscillator clock in parts per billion during the first interval.
U32 aluCurrent1MinPhaseErrorStdDevNs	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.9	Unsigned32	read-only	The standard deviation of the phase error from the local oscillator clock in nano seconds during the first interval.
T/F aluCurrent1MinValidData	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.7	TruthValue	read-only	This variable indicates if the data for the first interval is valid.
I32 aluCurrent24HourFreqOffsetMeanPpb	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.3	Integer32	read-only	aluCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset from the local oscillator clock in parts per billion for up to the last 24 hour.
U32 aluCurrent24HourFreqOffsetStdDevPpb	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.4	Unsigned32	read-only	aluCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the frequency offset from the local oscillator clock in parts per billion for up to the last 24 hour.
INT aluExtDS1PortLineImpedance	1.3.6.1.4.1.6527.6.2.2.2.2.9.1.1	INTEGER	read-write	The value of aluExtDS1PortLineImpedance indicates the current line impedance set on the physical T1/E1 port. T1 Ports may only be configured to have an impedance of 100 Ohms. E1 Ports may be configured to have an impledance of either 75 or 120 Ohms where the default impedance is 120 Ohms.
OCT aluExtDS1SignalBitsState	1.3.6.1.4.1.6527.6.2.2.2.2.12.1.3	OCTET STRING	read-only	aluExtDS1SignalBitsState is an array of bytes used to indicate the current state of the ABCD signalling bits for all timeslots of a DS1/E1. The first half of the array or the 32 most significant bytes describe the RX ABCD bits. The other half describes the TX ABCD bits. In each half of the array, every byte represents a particular timeslot. The most significant byte represents timeslot 1. The least significant byte represents timeslot 32. The byte arrangement is as follows: array index: \| 0 1 ... 30 31 \| 32 33 ... 62 63 \| timeslot: \| 1 2 ... 31 32 \| 1 2 ... 31 32 \| \| \| \| Each byte carries ABCD bits in the least significant nibble. The byte's most significant bit indicates the validity of the ABCD bits. The bit arrangement is as follows: bit pos: \| 7 6 5 4 3 2 1 0 \| \| V x x x A B C D \| 'V' - validity (0 = invalid, 1 = valid) 'x' - don't care ABCD bits are marked invalid for a variety of situations (eg. tmnxDS1SignalMode not configured for CAS, timeslot(s) not configured as part of a channel-group, DS1/E1 status not up, etc.). For CAS DS1 SF, only the AB signalling bits are supported. The remaining 2 least significant bits in the nibble are undefined.
aluExtPethPsePortEntry	1.3.6.1.4.1.6527.6.2.2.2.2.13.1		not-accessible	Each row entry represents the extended functionality of a power Ethernet port
INT aluExtPethPsePortFaultReason	1.3.6.1.4.1.6527.6.2.2.2.2.13.1.1	INTEGER	read-only	Reason for a detection status failure: none (1) dcp (2) - Positive DC supply connected at the port hicap (3) - High Capacitance at the port rlow (4) - Low Resistance at the port detok (5) - detection ok rhigh (6) - High resistance at the port open (7) - open circuit dcn (8) - Low impedence to Vee at the port tstart (9) - Startup failure at the port icv (10) - Current limit disconnect timeout at the port tcut (11) - Overcurrent and current limit violation at the port dis (12) - DC load disconnect sup (13) - Supply fault at the PSE device pdeny (14) - Power Denied
INT aluExtPethPsePortOperStatus	1.3.6.1.4.1.6527.6.2.2.2.2.13.1.3	INTEGER	read-only	The operational status of the port PSE.
INT aluExtPethPsePortPowerLevel	1.3.6.1.4.1.6527.6.2.2.2.2.13.1.2	INTEGER	read-write	none (1) The interface does not provide the PoE function. standard (2) The interface provides the standard PoE power level. plus (3) The interface provides the higher power 'Poe Plus' PSE function
NTF aluExtPethPsePortStatusChange	1.3.6.1.4.1.6527.6.2.2.2.3.1			Generated when there is a change in Power Classification, Detection Status, Fault Reason, or Oper Status on a PoE port.
aluExtPethPsePortTable	1.3.6.1.4.1.6527.6.2.2.2.2.13		not-accessible	The aluExtPethPsePortTable has an entry for a table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device.
aluExtTmnxDS1Entry	1.3.6.1.4.1.6527.6.2.2.2.2.12.1		not-accessible	Each row entry represents extended functionality of a DS1 physical port or channel on Alcatel-Lucent 7210 SAS devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxDS1Table are created or deleted.
aluExtTmnxDS1PortEntry	1.3.6.1.4.1.6527.6.2.2.2.2.9.1		not-accessible	Each row entry represents extended functionality of a physical DS1 port on Alcatel-Lucent 7210 SAS devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxDS1PortTable are created or deleted.
aluExtTmnxDS1PortTable	1.3.6.1.4.1.6527.6.2.2.2.2.9		not-accessible	The aluExtTmnxDS1PortTable has an entry for a DS1 physical port.
aluExtTmnxDS1Table	1.3.6.1.4.1.6527.6.2.2.2.2.12		not-accessible	The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel.
I32 aluIntervalFreqOffsetMeanPpb	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.7	Integer32	read-only	The mean frequency offset from the local oscillator clock in parts per billion during the interval.
U32 aluIntervalFreqOffsetStdDevPpb	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.8	Unsigned32	read-only	The standard deviation of the frequency offset from the local oscillator clock in nano seconds during the interval.
INT aluIntervalNumber	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.1	INTEGER	read-only	A number between 1 and 15, where 1 is the most recently completed 1 minute interval and 15 is the 1 minutes interval completed 14 minutes prior to interval 1.
I32 aluIntervalPhaseErrorMeanNs	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.6	Integer32	read-only	The mean of the phase error from the local oscillator clock in nano seconds during the interval.
I32 aluIntervalPhaseErrorMeanPpb	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.4	Integer32	read-only	The mean phase error from the local oscillator clock in parts per billion during the interval.
U32 aluIntervalPhaseErrorStdDevNs	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.5	Unsigned32	read-only	The standard deviation of the phase error from the local oscillator clock in nano seconds during the interval.
TIM aluIntervalUpdateTime	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.3	TimeStamp	read-only	The update time of the ACR interval statistics
T/F aluIntervalValidData	1.3.6.1.4.1.6527.6.2.2.2.2.11.1.2	TruthValue	read-only	This variable indicates if the data for this interval is valid.
TIM aluLastUpdateTime	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.1	TimeStamp	read-only	The last time the ACR statistics were updated
U32 aluMaxShortIntervalMinutes	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.5	Unsigned32	read-only	'aluMaxShortIntervalMinutes' the maximum number of 'aluStatsShortIntervalIndexes'.
aluPortAcrClkStatsEntry	1.3.6.1.4.1.6527.6.2.2.2.2.10.1		not-accessible	Defines an entry in aluPortAcrClkStatsTable. Entries are created and deleted by the system depending port configuration.
aluPortAcrClkStatsGroup	1.3.6.1.4.1.6527.6.2.2.1.2.2.4			The group of objects supporting retrieval of the ACR clock statistic on Alcatel-Lucent SAR series systems
aluPortAcrClkStatsShortIntervalEntry	1.3.6.1.4.1.6527.6.2.2.2.2.11.1		not-accessible	An entry in the Port ACR Clock Interval table.
aluPortAcrClkStatsShortIntervalTable	1.3.6.1.4.1.6527.6.2.2.2.2.11		not-accessible	The Port ACR Clock Interval Table contains various statistics collected by each adaptively timed port over the previous 15 minutes. The past 15 minutes are broken into 15 1 minute intervals. Each row in this table represents one such interval (identified by aluAcrClkIntervalNumber).
aluPortAcrClkStatsTable	1.3.6.1.4.1.6527.6.2.2.2.2.10		not-accessible	Defines the Alcatel-Lucent SAR series port adaptive clock recovery (ACR) statistics table for providing, via SNMP, the capability of retrieving statistical information relating to clock that is derived from the ACR CPIPE PW.
U32 aluTotalMinutesIn24Hour	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.2	Unsigned32	read-only	The number of minutes in alu24HourFreqOffsetMeanPpb and alu24HourFreqOffsetStdDevPpb
U32 aluTotalShortIntervalMinutes	1.3.6.1.4.1.6527.6.2.2.2.2.10.1.6	Unsigned32	read-only	'aluTotalShortIntervalMinutes' is the number of 'aluStatsShortIntervalIndexes' that have valid statistics
OCT pethPsePortEventInfo	1.3.6.1.4.1.6527.6.2.2.2.2.14	OCTET STRING	accessible-for-notify	The operational status of the port PSE.
SER portShgDescription	1.3.6.1.4.1.6527.6.2.2.2.2.6.1.4	ServObjDesc	read-create	The value of the object portShgDescription specifies generic information about this split-horizon group.
portShgInfoEntry	1.3.6.1.4.1.6527.6.2.2.2.2.6.1		not-accessible	Split-horizon group information about a TLS service.
portShgInfoTable	1.3.6.1.4.1.6527.6.2.2.2.2.6		not-accessible	A table that contains port split-horizon group information.
U32 portShgInstanceId	1.3.6.1.4.1.6527.6.2.2.2.2.6.1.3	Unsigned32	read-only	The value of the object portShgInstanceId indicates the instance identifier for the split horizon group.
TIM portShgLastMgmtChange	1.3.6.1.4.1.6527.6.2.2.2.2.6.1.5	TimeStamp	read-only	The value of the object portShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group.
TNA portShgName	1.3.6.1.4.1.6527.6.2.2.2.2.6.1.1	TNamedItem	not-accessible	The value of the object portShgName specifies the name of the split-horizon group.
ROW portShgRowStatus	1.3.6.1.4.1.6527.6.2.2.2.2.6.1.2	RowStatus	read-create	The value of the object portShgRowStatus specifies the status of this row. The only values supported during a set operation are createAndGo(4) and destroy(6). To delete an entry from this table, there should be no port Bindings refering to it.
sasTmnxPortEtherExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.2.4.1		not-accessible	Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM 'cardEntry' can be deleted from the tmnxMDATable, its supported 'tmnxPortEntries' and 'tmnxPortEtherEntries' must be in the proper state for removal. The tmnxPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType.
sasTmnxPortEtherExtnTable	1.3.6.1.4.1.6527.6.2.2.2.2.4		not-accessible	This table has additional information about the 7210 platforms
sasTmnxPortExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.2.2.1		not-accessible	Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported 'tmnxPortEntries' must be in the proper state for removal.
sasTmnxPortExtnTable	1.3.6.1.4.1.6527.6.2.2.2.2.2		not-accessible	This table has additional information about the 7210 platforms
INT tmnxPortAccEgrSapQosMarking	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.19	INTEGER	read-write	Port Ethernet Access Egress Sap Qos Marking
U32 tmnxPortAccessEgressQoSPolicyId	1.3.6.1.4.1.6527.6.2.2.2.2.2.1.2	Unsigned32	read-write	Qos Policy ID for Access Egress Port
C64 tmnxPortAccessEgressQueueStatsDroOcts	1.3.6.1.4.1.6527.6.2.2.2.2.7.1.5	Counter64	read-only	tmnxPortAccessEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.
C64 tmnxPortAccessEgressQueueStatsDroPkts	1.3.6.1.4.1.6527.6.2.2.2.2.7.1.4	Counter64	read-only	tmnxPortAccessEgressQueueStatsDroPkts indicates the number of dropped access egress packets on this port using this queue.
tmnxPortAccessEgressQueueStatsEntry	1.3.6.1.4.1.6527.6.2.2.2.2.7.1		not-accessible	Defines an entry in tmnxPortAccessEgressQueueStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
C64 tmnxPortAccessEgressQueueStatsFwdOcts	1.3.6.1.4.1.6527.6.2.2.2.2.7.1.3	Counter64	read-only	tmnxPortAccessEgressQueueStatsFwdOcts indicates the number of forward access egress octets forwarded on this port using this queue.
C64 tmnxPortAccessEgressQueueStatsFwdPkts	1.3.6.1.4.1.6527.6.2.2.2.2.7.1.2	Counter64	read-only	tmnxPortAccessEgressQueueStatsFwdPkts indicates the number of forwarded access egress packets forwarded on this port using this queue.
TQU tmnxPortAccessEgressQueueStatsIndex	1.3.6.1.4.1.6527.6.2.2.2.2.7.1.1	TQueueId	not-accessible	'tmnxPortAccessEgressQueueIndex' serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a access egress queue for the specified port in the managed system.
tmnxPortAccessEgressQueueStatsTable	1.3.6.1.4.1.6527.6.2.2.2.2.7		not-accessible	Defines the Alcatel SAS series access port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the access egress traffic.
INT tmnxPortEtherClockConfig	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.13	INTEGER	read-write	When the value of tmnxPortEtherClockConfig is 'automatic' the Ethernet interface will automatically negotiate clock mastership along with other link parameters with the far end. Depending upon the capabilities of the two ends, one will be master the other will be slave for clocking. When the value of tmnxPortEtherClockConfig is 'manual-master', the Ethernet interface will negotiate other link parameters with the far end except clock mastership. It assumes clock mastership and want the other end to be slave. When the value is 'manual-slave' this ethernet interface chooses to be slave and wants the far end to assume clock mastership. For 10 baseT and 100 baseT ethernet interfaces, value of this variable should be 'none', as this will not be applicable for those interfaces.
T/F tmnxPortEtherDcommStatus	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.30	TruthValue	read-only	The value of tmnxPortEtherDcommStatus is true if this port is decommissioned
T/F tmnxPortEtherDe1OutProfile	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.22	TruthValue	read-write	The value of tmnxPortEtherDe1OutProfile if enabled will consider the value of the DEI(CFI) bit of the incoming packet , which if 1 will result in the packet being classified as out-profile and in-profile otherwise
I32 tmnxPortEtherEgressMaxBurst	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.1	Integer32	read-write	Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set.
INT tmnxPortEtherEgrSchedMode	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.10	INTEGER	read-write	tmnxPortEtherEgrSchedMode sets the SAP egress scheduler mode. In 'fc-based' mode the prority of all the egress queues across all the SAPs are considered to determine the next queue to schedule. In 'sap-based' mode the scheduler uses the priority of all the egress queues in a SAP to determine the next queue to schedule and uses round-robin scheduling mechanism to schedule each of the SAP
U32 tmnxPortEtherIpMTU	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.12	Unsigned32	read-write	tmnxPortEtherIpMTU is the IP MTU for interfaces using this port
INT tmnxPortEtherLoopback	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.11	INTEGER	read-write	If tmnxPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback
INT tmnxPortEtherMulticastIngress	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.31	INTEGER	read-write	Defines multicast ingress lookup type
INT tmnxPortEtherNwAggRateLimit	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.23	INTEGER	read-write	The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic on a hybrid port.
I32 tmnxPortEtherNwAggRateLimitCir	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.28	Integer32	read-write	The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic cir rate on a hybrid port.
I32 tmnxPortEtherNwAggRateLimitPir	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.29	Integer32	read-write	The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic cir rate on a hybrid port.
T/F tmnxPortLldpTnlNrstBrdgeDstMac	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.20	TruthValue	read-write	If tmnxPortLldpTnlNrstBrdgeDstMac is set to 'true' and admin status is disabled lldp pkts will be tunnelled
MAC tmnxPortLoopbckDstMacAddr	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.18	MacAddress	read-write	Loopback Destination Mac Address
TMN tmnxPortLoopbckSapEncapVal	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.16	TmnxEncapVal	read-write	Loopback Sap Encapsulation
TMN tmnxPortLoopbckSapPortId	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.15	TmnxPortID	read-write	Loopback Sap Port Id
TMN tmnxPortLoopbckServId	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.14	TmnxServId	read-write	Loopback Service Id
MAC tmnxPortLoopbckSrcMacAddr	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.17	MacAddress	read-write	Loopback Source Mac Address
TNA tmnxPortMonitorOperGrpName	1.3.6.1.4.1.6527.6.2.2.2.2.2.1.7	TNamedItemOrEmpty	read-write	System monitor oper group to be attached to this port
C64 tmnxPortNetEgressQueueStatsDroOcts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.5	Counter64	read-only	tmnxPortNetEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.
C64 tmnxPortNetEgressQueueStatsDroPkts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.4	Counter64	read-only	tmnxPortNetEgressQueueStatsDroPkts indicates the number of dropped network egress packets on this port using this queue.
tmnxPortNetEgressQueueStatsEntry	1.3.6.1.4.1.6527.6.2.2.2.2.8.1		not-accessible	Defines an entry in tmnxPortNetEgressQueueStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
C64 tmnxPortNetEgressQueueStatsFwdOcts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.3	Counter64	read-only	tmnxPortNetEgressQueueStatsFwdOcts indicates the number of forwarded network egress octets on this port using this queue.
C64 tmnxPortNetEgressQueueStatsFwdPkts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.2	Counter64	read-only	tmnxPortNetEgressQueueStatsFwdPkts indicates the number of forwarded network egress packets on this port using this queue.
TQU tmnxPortNetEgressQueueStatsIndex	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.1	TQueueId	not-accessible	tmnxPortNetEgressQueueStatsIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.
C64 tmnxPortNetEgressQueueStatsInProfDroOcts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.7	Counter64	read-only	tmnxPortNetEgressQueueStatsInProfDroOcts indicates the number of dropped network egress octets on this port using this in-profile queue.
C64 tmnxPortNetEgressQueueStatsInProfDroPkts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.6	Counter64	read-only	tmnxPortNetEgressQueueStatsInProfDroPkts indicates the number of dropped network egress octets on this port using this in-profile queue.
C64 tmnxPortNetEgressQueueStatsOutProfDroOcts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.9	Counter64	read-only	tmnxPortNetEgressQueueStatsOutProfDroOcts indicates the number of dropped network egress octets on this port using this out-profile queue.
C64 tmnxPortNetEgressQueueStatsOutProfDroPkts	1.3.6.1.4.1.6527.6.2.2.2.2.8.1.8	Counter64	read-only	tmnxPortNetEgressQueueStatsOutProfDroPkts indicates the number of dropped network egress octets on this port using this out-profile queue.
tmnxPortNetEgressQueueStatsTable	1.3.6.1.4.1.6527.6.2.2.2.2.8		not-accessible	Defines the Alcatel SAS series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
U32 tmnxPortNetworkQoSPolicyId	1.3.6.1.4.1.6527.6.2.2.2.2.2.1.3	Unsigned32	read-write	Port Network Policy ID
TNA tmnxPortOperGrpName	1.3.6.1.4.1.6527.6.2.2.2.2.2.1.6	TNamedItemOrEmpty	read-write	System oper group to be attached to this port
TNA tmnxPortShgName	1.3.6.1.4.1.6527.6.2.2.2.2.2.1.4	TNamedItemOrEmpty	read-write	Split horizon group to be attached to this port
T/F tmnxPortStatsQueue1PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.2	TruthValue	read-write	If tmnxPortStatsQueue1PktsFwd is set to 'true', count the egress packets with forwarding class value '0'.
T/F tmnxPortStatsQueue2PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.3	TruthValue	read-write	If tmnxPortStatsQueue2PktsFwd is set to 'true', count the egress packets with forwarding class value '1'.
T/F tmnxPortStatsQueue3PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.4	TruthValue	read-write	If tmnxPortStatsQueue3PktsFwd is set to 'true', count the egress packets with forwarding class value '2'.
T/F tmnxPortStatsQueue4PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.5	TruthValue	read-write	If tmnxPortStatsQueue4PktsFwd is set to 'true', count the egress packets with forwarding class value '3'.
T/F tmnxPortStatsQueue5PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.6	TruthValue	read-write	If tmnxPortStatsQueue5PktsFwd is set to 'true', count the egress packets with forwarding class value '5'.
T/F tmnxPortStatsQueue6PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.7	TruthValue	read-write	If tmnxPortStatsQueue6PktsFwd is set to 'true', count the egress packets with forwarding class value '6'.
T/F tmnxPortStatsQueue7PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.8	TruthValue	read-write	If tmnxPortStatsQueue7PktsFwd is set to 'true', count the egress packets with forwarding class value '7'.
T/F tmnxPortStatsQueue8PktsFwd	1.3.6.1.4.1.6527.6.2.2.2.2.4.1.9	TruthValue	read-write	If tmnxPortStatsQueue8PktsFwd is set to 'true', count the egress packets with forwarding class value '8'.
T/F tmnxPortUplinkMode	1.3.6.1.4.1.6527.6.2.2.2.2.2.1.1	TruthValue	read-write	If the tmnxPortUplinkMode is set to true when the tmnxPortMode is set to 'access(1)' and the port acts as an uplink. 'tmnxPortEncaptype' must also be configured 'qinqEncap' when using access port as uplink port.
T/F tmnxPortUseDei	1.3.6.1.4.1.6527.6.2.2.2.2.2.1.5	TruthValue	read-write	Enable/disable DEI based policing.
tmnxSASPortCompliances	1.3.6.1.4.1.6527.6.2.2.1.2.1
tmnxSASPortConformance	1.3.6.1.4.1.6527.6.2.2.1.2
tmnxSASPortGroups	1.3.6.1.4.1.6527.6.2.2.1.2.2
tmnxSASPortMIBModule	1.3.6.1.4.1.6527.6.2.1.1.6			This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
C64 tmnxSASPortNetIngressFwdInProfOcts	1.3.6.1.4.1.6527.6.2.2.2.2.3.1.4	Counter64	read-only	tmnxSASPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this meter.
C64 tmnxSASPortNetIngressFwdInProfPktsEx	1.3.6.1.4.1.6527.6.2.2.2.2.3.1.2	Counter64	read-only	tmnxSASPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this meter.
C64 tmnxSASPortNetIngressFwdOutProfOcts	1.3.6.1.4.1.6527.6.2.2.2.2.3.1.5	Counter64	read-only	tmnxSASPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this meter.
C64 tmnxSASPortNetIngressFwdOutProfPkts	1.3.6.1.4.1.6527.6.2.2.2.2.3.1.3	Counter64	read-only	tmnxSASPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this meter.
TNE tmnxSASPortNetIngressMeterIndex	1.3.6.1.4.1.6527.6.2.2.2.2.3.1.1	TNetworkIngressMeterId	not-accessible	'tmnxSASPortNetIngressQueueIndex' serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress meter for the specified port in the managed system.
tmnxSASPortNetIngressStatsEntry	1.3.6.1.4.1.6527.6.2.2.2.2.3.1		not-accessible	Defines an entry in tmnxSASPortNetIngressStatsTable. Entries are created and deleted by the system depending on the meter policy being used at the specific port.
tmnxSASPortNetIngressStatsTable	1.3.6.1.4.1.6527.6.2.2.2.2.3		not-accessible	Defines the Alcatel SAS series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical Meters being used for the ports to forward the network ingress traffic.
tmnxSASPortNotificationObjects	1.3.6.1.4.1.6527.6.2.2.2.3
tmnxSASPortObjs	1.3.6.1.4.1.6527.6.2.2.2.2
tmnxSASPortStatsObjs	1.3.6.1.4.1.6527.6.2.2.2.4
tmnxSASPortV1v0Group	1.3.6.1.4.1.6527.6.2.2.1.2.2.1			sas group object definition
tmnxSASPortV1v1Group	1.3.6.1.4.1.6527.6.2.2.1.2.2.2			sas group object definition
tmnxSASPortV2v0Group	1.3.6.1.4.1.6527.6.2.2.1.2.2.3			SAS group object definitions for 2.0 release
tmnxSASPortV3v0Group	1.3.6.1.4.1.6527.6.2.2.1.2.2.6			SAS group object definitions for 3.0 release
tmnxSASPortV4v0Group	1.3.6.1.4.1.6527.6.2.2.1.2.2.5			sas group object definition
tmnxSASPortV5v0Group	1.3.6.1.4.1.6527.6.2.2.1.2.2.7			sas 5.0 release, group object definition
tmnxSASPortV6v0Group	1.3.6.1.4.1.6527.6.2.2.1.2.2.8			sas 6.0 release, group object definition
tmnxVirtualPortEntry	1.3.6.1.4.1.6527.6.2.2.2.2.15.1		not-accessible	Each row entry represents a virtual port
INT tmnxVirtualPortInUse	1.3.6.1.4.1.6527.6.2.2.2.2.15.1.2	INTEGER	read-only	tmnxVirtualPortInUse describes whether the virtual port is used by an application or not.
TMN tmnxVirtualPortPortID	1.3.6.1.4.1.6527.6.2.2.2.2.15.1.1	TmnxPortID	not-accessible	tmnxVirtualPortPortID is an index into this table
INT tmnxVirtualPortSpeed	1.3.6.1.4.1.6527.6.2.2.2.2.15.1.3	INTEGER	read-only	tmnxVirtualPortSpeed describes the speed of the virtual ports.
tmnxVirtualPortTable	1.3.6.1.4.1.6527.6.2.2.2.2.15		not-accessible	The port table has an entry for each virtual port

RFC description

Alcatel 7x50 SAS port MIB module for managing hardware components and port provisioning on carrier Ethernet platforms.

Start monitoring Nokia access/aggregation switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-SAS-PORT-MIB