All MIBs › TIMETRA-SAS-PORT-MIB › aluExtPethPsePortFaultReason
aluExtPethPsePortFaultReason
Module: TIMETRA-SAS-PORT-MIB
OID (symbolic): TIMETRA-SAS-PORT-MIB::aluExtPethPsePortFaultReason
OID (numeric): 1.3.6.1.4.1.6527.6.2.2.2.2.13.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Reason for a detection status failure: none (1) dcp (2) - Positive DC supply connected at the port hicap (3) - High Capacitance at the port rlow (4) - Low Resistance at the port detok (5) - detection ok rhigh (6) - High resistance at the port open (7) - open circuit dcn (8) - Low impedence to Vee at the port tstart (9) - Startup failure at the port icv (10) - Current limit disconnect timeout at the port tcut (11) - Overcurrent and current limit violation at the port dis (12) - DC load disconnect sup (13) - Supply fault at the PSE device pdeny (14) - Power Denied
What is aluExtPethPsePortFaultReason?
Reports why a PoE port's power detection failed, e.g. hicap (high capacitance), rlow/rhigh (resistance out of range), open (open circuit), tstart (startup failure), or pdeny (power denied); none(1) by default when there's no fault. An admin checks this when a connected PoE device isn't powering up, to see exactly which electrical condition the PSE detected as the cause.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.6.2.2.2.2.13.1.1 snmpwalk -v2c -c public <target> TIMETRA-SAS-PORT-MIB::aluExtPethPsePortFaultReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.6.2.2.2.2.13.1.1.1 snmpget -v2c -c public <target> TIMETRA-SAS-PORT-MIB::aluExtPethPsePortFaultReason.1
Start monitoring Nokia access/aggregation switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-SAS-PORT-MIB::aluExtPethPsePortFaultReason OID value, configure state conditions and alerts, and monitor any Nokia access/aggregation switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.6 | tmnxBasedProducts | TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.6.2 | timetraServiceAccessSwitches | TIMETRA-SAS-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.6.2.2 | timetraSASMIB | TIMETRA-SAS-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.6.2.2.2 | timetraSASObjs | TIMETRA-SAS-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.6.2.2.2.2 | tmnxSASPortObjs | TIMETRA-SAS-PORT-MIB |
| 1.3.6.1.4.1.6527.6.2.2.2.2.13 | aluExtPethPsePortTable | TIMETRA-SAS-PORT-MIB |
| 1.3.6.1.4.1.6527.6.2.2.2.2.13.1 | aluExtPethPsePortEntry | TIMETRA-SAS-PORT-MIB |
| 1.3.6.1.4.1.6527.6.2.2.2.2.13.1.1 | aluExtPethPsePortFaultReason | TIMETRA-SAS-PORT-MIB |