TIMETRA-LAG-MIB

All MIBs › TIMETRA-LAG-MIB

Organization: Alcatel-Lucent

Last Updated: 2012-04-06

Category: Link Aggregation, Nokia SR OS / Alcatel-Lucent 7750 SR

Description: Manages Nokia/Alcatel-Lucent 7750 SR link aggregation group membership, LACP, and port status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-LAG-MIB?

TIMETRA-LAG-MIB is Alcatel-Lucent's (now Nokia's) proprietary SNMP module for managing IEEE 802.3ad Link Aggregation Groups (LAGs) on SR-series service routers running SR OS. It exposes configuration and status data for LAG bundles, including member port thresholds, LACP administrative settings, dynamic cost calculation, and row-status-driven creation/deletion of LAG entries. It is central to monitoring the health of link aggregation on the device: administrators can track whether LACP is enabled and functioning, whether the count of active member ports has fallen below a configured threshold, and whether LAG descriptions/administrative states match intended configuration -- all reflecting the hardware/link status of the bonded interfaces. The MIB builds on the IEEE 802.3ad LACP standard and integrates with Alcatel-Lucent's broader TIMETRA enterprise MIB tree and IF-MIB interface indexing. It is deployed in service-provider and enterprise networks using Nokia/Alcatel-Lucent 7750 SR, 7450 ESS, and related SR OS platforms to provide resilient, load-balanced trunk links. Engineers can download the TIMETRA-LAG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-LAG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia/Alcatel-Lucent 7750 SR service routers
Nokia SR OS platforms (7450 ESS, 7750 SR)

Monitoring Examples

An operator would poll tLagConfigTable/tLagConfigEntry (indexed by tLagIndex) to check tLagEnableLACP and tLagLACPMode against tLagPortThreshold -- if the number of up member ports drops below the configured threshold, tLagPortThresholdAction determines whether the LAG is brought down, revealing a physical link or optics failure on one or more bundled ports. tLagDynamicCosting and tLagLACPAdminKeyAutogen confirm expected cost/LACP negotiation behavior, and tLagRowStatus confirms the LAG entry is administratively active.

What Can Be Monitored

LACP enable/mode status
LAG member port thresholds
port threshold actions
LAG administrative/row status
dynamic costing state
LAG description/naming

Imported Objects

From IEEE8023-LAG-MIB

dot3adAggPortEntry

OBJECT-TYPE

From IF-MIB

InterfaceIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-PORT-MIB

tmnxPortLagId	OBJECT-TYPE
tmnxPortPortID	OBJECT-TYPE

From TIMETRA-TC-MIB

TItemLongDescription
TNamedItemOrEmpty
TmnxPortID

How to Use in IPNetwork Monitor

Example using tLagPortThresholdFalling OID:

Select a Nokia/Alcatel-Lucent 7750 SR, 7450 ESS SR OS platform (LACP/link-aggregation member-port status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tLagPortThresholdFalling into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports counts the number of linkDown or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being less than or equal to tLagPortThreshold value. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraLagMIBModule	1.3.6.1.4.1.6527.1.1.3.15			This document is the SNMP MIB module to manage and provision the IEEE 802.3ad Link Aggregation Group operation on Alcatel-Lucent SROS systems. Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
INT tLagAccessAdaptQos	1.3.6.1.4.1.6527.3.1.2.15.2.1.12	INTEGER	read-create	The value of tLagAccessAdaptQos specifies how the LAG SAP queue and virtual scheduler buffering and rate parameters are adapted over multiple active MDAs. link (1) - The LAG will create the SAP queues and virtual schedulers with the actual parameters on each MDA. distribute (2) - Each MDA will receive a fraction of the SAP and scheduler parameters.
tLagConfigEntry	1.3.6.1.4.1.6527.3.1.2.15.2.1		not-accessible	An entry (conceptual row) in the tLagConfigTable. Each entry represents a Link Aggregation Group. Create or destroy rows to add or remove Link Aggregation Groups (LAG). After tLagRowStatus is set to active(1), a corresponding entry is created in IEEE8023-LAG-MIB dot3adAggTable. The corresponding entry in IEEE8023-LAG-MIB dot3adAggTable is removed when tLagRowStatus is set to destroy(6). Use ifAdminStatus to set interface up and down for this LAG entry. Use ifAlias for the interface description.
TIM tLagConfigLastChange	1.3.6.1.4.1.6527.3.1.2.15.3.1.2	TimeStamp	read-only	last change timestamp records when any object in tLagConfigTable was set.
tLagConfigTable	1.3.6.1.4.1.6527.3.1.2.15.2		not-accessible	Configuration information about each Link Aggregation Group.
TIT tLagDescription	1.3.6.1.4.1.6527.3.1.2.15.2.1.7	TItemLongDescription	read-create	discription text for the Link Aggregation Group port.
T/F tLagDynamicCosting	1.3.6.1.4.1.6527.3.1.2.15.2.1.8	TruthValue	read-create	When dynamic cost and OSPF autocost are both configured then costing is applied based on the total number of links configured and the cost is advertised inversely proportional to the number of links available at the time, providing the number of links that are up exceeds the configured LAG threshold value at which time the configured threshold action determines if and at what cost this LAG will be advertised.
NTF tLagDynamicCostOff	1.3.6.1.4.1.6527.3.1.3.15.0.2			the number of phyical ports in the Link Aggregation Group is greater than tLagPortThreshold value.
NTF tLagDynamicCostOn	1.3.6.1.4.1.6527.3.1.3.15.0.1			the number of phyical ports in the Link Aggregation Group is less than or equal to tLagPortThreshold value.
T/F tLagEnableLACP	1.3.6.1.4.1.6527.3.1.2.15.2.1.6	TruthValue	read-create	enables (true(1)) or disables (false(2)) the Link Aggregation Control Protocol (LACP). The value of tLagEnableLACP can only be set to 'true(1)' when tLagStandbySignaling is set to 'lacp(1)' and the value of tLagLACPSelCrit is not 'bestPort(3)'.
T/F tLagEnableMarkerGenerator	1.3.6.1.4.1.6527.3.1.2.15.2.1.5	TruthValue	read-create	enables (true(1)) or disables (false(2)) the Marker Generator protocol.
U32 tLagholdTimeDown	1.3.6.1.4.1.6527.3.1.2.15.2.1.17	Unsigned32	read-create	The value of tLagholdTimeDown specifies the timer in 0.1 second units which controls the delay between detecting that a LAG is down (all active ports are down) and reporting it to the higher levels. The default value for this timer is 0, i.e. the higher levels are informed directly. A non zero value may be configured e.g. when active/standby signalling is used in a 1:1 fashion to avoid that the higher levels are informed during the small time interval between detecting that the LAG is down and the time needed to activate the standby system.
NUM tLagIfIndex	1.3.6.1.4.1.6527.3.1.2.15.3.1.1	InterfaceIndexOrZero	read-only	ifIndex for the Link Aggregation Group. This value is zero when tLagRowStatus is not active(1).
NUM tLagIndex	1.3.6.1.4.1.6527.3.1.2.15.2.1.1	LAGInterfaceNumber	not-accessible	the number of the Link Aggregation Group.
T/F tLagLACPAdminKeyAutogen	1.3.6.1.4.1.6527.3.1.2.15.2.1.10	TruthValue	read-only	tLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key in the dot3adAggActorAdminKey object was auto generated. tLagLACPAdminKeyAutogen is set to 'false', if the lag administrative key was manually configured.
INT tLagLACPMode	1.3.6.1.4.1.6527.3.1.2.15.2.1.9	INTEGER	read-create	tLagLACPMode represents the mode in which LACP will operate. If the value is set to 'passive', LACP places all member ports of a lag into a passive negotiating state. When this is the case member ports of the lag respond to LACP packets they receive but do not initiate LACP packet negotiation. If the value is set to 'active', LACP places all member ports of a lag in to an active negotiation state. When this occurs the port will initiate LACP negotiation immediately once the port achieves link up state. At least one of the peer lag ports must be configured as active to initiate LACP. The default mode is passive.
U32 tLagLACPNbrOfSubGroups	1.3.6.1.4.1.6527.3.1.2.15.2.1.16	Unsigned32	read-only	The value of tLagLACPNbrOfSubGroups indicates the number of subgroups configured in this LAG.
TMN tLagLACPPrimaryPort	1.3.6.1.4.1.6527.3.1.2.15.3.1.5	TmnxPortID	read-only	tLagLACPPrimaryPort contains the primary port of the LACP. The following two conditions have to be met for the port to become eligible for becoming the primary port: a) Port has to be in either link up or oper up. b) The port must have received at least one LACP PDU. Once the above two conditions have been met, port with a highest priority is chosen as the primary port. If there is a tie, the smallest TmnxPortID will be the primary port.
INT tLagLACPSelCrit	1.3.6.1.4.1.6527.3.1.2.15.2.1.14	INTEGER	read-create	The value of tLagLACPSelCrit specifies which selection criteria should be used to select the active sub-group.
T/F tLagLACPSelCritSlaveToPartner	1.3.6.1.4.1.6527.3.1.2.15.2.1.15	TruthValue	read-create	The value of tLagLACPSelCritSlaveToPartner specifies together with tLagLACPSelCrit selection criteria should be used to select the active sub-group. The term 'eligible member' refers to a lag-member link which can potentially become active. This means it is oper up, and not disabled for use by the remote side. The object tLagLACPSelCritSlaveToPartner can be used to control whether ornot this latter condition is taken into account.
INT tLagLACPTransmitInterval	1.3.6.1.4.1.6527.3.1.2.15.2.1.11	INTEGER	read-create	tLagLACPTransmitInterval configures the timer interval for periodic transmission of LACP packets. If set to 'slow', LACP packets are transmitted every 30 seconds. If set to 'fast', LACP packets are transmitted every second.
T/F tLagLACPXmitStdby	1.3.6.1.4.1.6527.3.1.2.15.2.1.13	TruthValue	read-create	The value of tLagLACPXmitStdby specifies whether or not LACP messages are transmitted on standby-links.
tLagMemberEntry	1.3.6.1.4.1.6527.3.1.2.15.5.1		not-accessible	Each row entry represents a particular port in a LAG. Entries are automatically created when a Port is provisioned as part of a LAG, i.e. when tmnxPortLagId from TIMETRA-PORT-MIB.mib is changed from its default value of '0'.
T/F tLagMemberPortIsPrimary	1.3.6.1.4.1.6527.3.1.2.15.5.1.2	TruthValue	read-only	The value of tLagMemberPortIsPrimary indicates whether the port used to index into tLagMemberTable is the primary port of the LAG used to index into tLagMemberTable.
TNA tLagMemberPortName	1.3.6.1.4.1.6527.3.1.2.15.5.1.1	TNamedItemOrEmpty	read-only	The value of tLagMemberPortName indicates the name of the port that is a member of the LAG used to index into tLagMemberTable. This is a read-only object that is the same as tmnxPortName from TIMETRA-PORT-MIB.mib.
NTF tLagMemberStateEvent	1.3.6.1.4.1.6527.3.1.3.15.0.7			tLagMemberStateEvent notification is generated when an event occurs on this member that might influence the lag state.
tLagMemberTable	1.3.6.1.4.1.6527.3.1.2.15.5		not-accessible	The tLagMemberTable has an entry for each Port that is part of a LAG.
tLagNotificationObjects	1.3.6.1.4.1.6527.3.1.2.15.4
tLagNotifications	1.3.6.1.4.1.6527.3.1.3.15.0
STR tLagNotifyAdditionalInfo	1.3.6.1.4.1.6527.3.1.2.15.4.3	DisplayString	accessible-for-notify	The value of tLagNotifyAdditionalInfo is a printable character string which contains information about the reason why the notification was generated.
INT tLagNotifyPortAddFailReason	1.3.6.1.4.1.6527.3.1.2.15.4.1	INTEGER	accessible-for-notify	tLagNotifyPortAddFailReason is used by the tLagPortAddFailed notification to indicate the reason why a port could not be added to a lag.
tLagNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.15
INT tLagNotifyStateChangedReason	1.3.6.1.4.1.6527.3.1.2.15.4.4	INTEGER	accessible-for-notify	The value of tLagNotifyStateChangedReason indicates the reason why a the state of a lag changed.
STR tLagNotifySubGroupSelected	1.3.6.1.4.1.6527.3.1.2.15.4.2	DisplayString	accessible-for-notify	The value of tLagNotifySubGroupSelected is a printable character string which contains information about the result of the selection algorithm.
tLagObjects	1.3.6.1.4.1.6527.3.1.2.15
tLagOperationEntry	1.3.6.1.4.1.6527.3.1.2.15.3.1		not-accessible	An entry (conceptual row) in the tLagOperationTable. Each entry represents an active Link Aggregation Group.
tLagOperationTable	1.3.6.1.4.1.6527.3.1.2.15.3		not-accessible	Operational information about each Link Aggregation Group.
T/F tLagPerFpIngQueuing	1.3.6.1.4.1.6527.3.1.2.15.2.1.19	TruthValue	read-create	The value of tLagPerFpIngQueuing specifies whether a more efficient method of queue allocation for LAG SAPs should be utilized. An 'inconsistentValue' error is returned if this object is set to a different value when there are existing port members in the LAG.
INT tLagPortActiveStdby	1.3.6.1.4.1.6527.3.1.2.15.6.1.2	INTEGER	read-only	The value of tLagPortActiveStdby indicates active standby state of this port in the LAG.
NTF tLagPortAddFailed	1.3.6.1.4.1.6527.3.1.3.15.0.3			tLagPortAddFailed notification is generated when a port could not be added to the lag. tLagNotifyPortAddFailReason contains the reason for failure.
NTF tLagPortAddFailureCleared	1.3.6.1.4.1.6527.3.1.3.15.0.5			tLagPortAddFailureCleared notification is generated when the failure, reported by tLagPortAddFailed, has been resolved.
tLagPortEntry	1.3.6.1.4.1.6527.3.1.2.15.6.1		not-accessible	A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device. The tLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features.
BIT tLagPortReasonDownFlags	1.3.6.1.4.1.6527.3.1.2.15.3.1.6	Bits	read-only	The tLagPortReasonDownFlags indicates why a lag port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has the object 'sapEthernetLLFOperStatus' set to 'fault'
LAG tLagPortSubgroup	1.3.6.1.4.1.6527.3.1.2.15.6.1.1	LAGSubgroup	read-write	The value of tLagPortSubgroup specifies the subgroup to which the port in this LAG is assigned.
tLagPortTable	1.3.6.1.4.1.6527.3.1.2.15.6		not-accessible	The tLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features.
INT tLagPortThreshold	1.3.6.1.4.1.6527.3.1.2.15.2.1.3	INTEGER	read-create	tLagPortThreshold is a threshold for tLagPortThresholdAction. When a physical port link state changes and the number of operational physical ports is less than or equal to tLagPortThreshold, tLagPortThresholdAction is invoked: either the LAG is set operationally down, or the protocols operating on the LAG interface are adjusted. When the number of operational physical ports becomes greater than tLagPortThreshold, tLagPortThresholdAction is revoked: either the LAG is set operationally up, or the protocols operating on the LAG interface are adjusted. The value zero means tLagPortThresholdAction is never invoked. To invoke dynamicCost at every physical port state change, set tLagPortThreshold to the total number of physical ports configured to be in the Link Aggregation Group.
INT tLagPortThresholdAction	1.3.6.1.4.1.6527.3.1.2.15.2.1.4	INTEGER	read-create	Port Threshold Action is action to take when the number of operational (link up) physical ports is less than tLagPortThreshold. When a physical port ifOperStatus changes and the number of operational physical ports is less than or equal to tLagPortThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to down(2). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to match the number of physical ports remaining in the Link Aggregation Group. a tLagDynamicCostOn notification is generated. When a physical port ifOperStatus changes and the number of operational physical ports is greater than tLagPortThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to up(1). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to be the value as configured. a tLagDynamicCostOff notification is generated. Regardless of the setting of this object, when the number of operational physical ports goes to zero, the Link Aggregation Group's ifOperStatus goes to down.
C32 tLagPortThresholdFallingEx	1.3.6.1.4.1.6527.3.1.2.15.3.1.3	Counter32	read-only	counts the number of linkDown or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being less than or equal to tLagPortThreshold value.
C32 tLagPortThresholdRising	1.3.6.1.4.1.6527.3.1.2.15.3.1.4	Counter32	read-only	counts the number of linkUp or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being greater than tLagPortThreshold value.
INT tLagPortType	1.3.6.1.4.1.6527.3.1.2.15.2.1.18	INTEGER	read-create	The value of tLagPortType specifies the type of ports allowed in this LAG. A value of 'standard (1)' allows all non-HSMDA type ports to be added to this LAG. A value of 'hsmda (2)' limits the LAG members to be HSMDA-v1 ports only. A value of 'hsmdaV2 (3)' limits the LAG members to be HSMDA-v2.
ROW tLagRowStatus	1.3.6.1.4.1.6527.3.1.2.15.2.1.2	RowStatus	read-create	RowStatus for this entry.
INT tLagStandbySignaling	1.3.6.1.4.1.6527.3.1.2.15.2.1.22	INTEGER	read-create	The value of tLagStandbySignaling specifies how the state of a member port is signalled to the remote side when the tLagPortActiveStdby corresponding to this member port has the value 'standby'. lacp (1) - The state of this member port is signalled to the other side through the LACP protocol. powerOff (2) - This member port is powered off. The value of tLagStandbySignaling can only be set to 'powerOff(2)' when tLagEnableLACP is set to 'false(2)' and tLagLACPSelCrit is set to 'bestPort(3)'.
NTF tLagStateEvent	1.3.6.1.4.1.6527.3.1.3.15.0.6			tLagStateEvent notification is generated when an event occurs that might influence the lag state.
NTF tLagSubGroupSelected	1.3.6.1.4.1.6527.3.1.3.15.0.4			The tLagSubGroupSelected notification is sent when the selection algorithm selects a different sub-group.
MAC tLagSystemId	1.3.6.1.4.1.6527.3.1.2.15.2.1.20	MacAddress	read-create	The value of the object tLagSystemId specifies A 6-octet MAC address used as a unique identifier for the System that contains this Aggregator. If set to zero, the dot3adAggActorSystemID will be used as identifier.
INT tLagSystemPriority	1.3.6.1.4.1.6527.3.1.2.15.2.1.21	INTEGER	read-create	The value of the object tLagSystemPriority specifies a 2-octet value indicating the priority value associated with the Actor's System ID. If set to -1, the priority is taken from the object dot3adAggActorSystemPriority
tmnxLagCompliances	1.3.6.1.4.1.6527.3.1.1.15.1
tmnxLagConformance	1.3.6.1.4.1.6527.3.1.1.15
tmnxLagGroups	1.3.6.1.4.1.6527.3.1.1.15.2
tmnxLagHsmdaV6v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.10			The group of objects supporting management of Link Aggregation (LAG) with the HSMDA MDA on Alcatel-Lucent SROS series systems.
tmnxLagInstanceV4v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.5			The group of objects supporting management of Link Aggregation (LAG) on Alcatel-Lucent SROS series systems.
tmnxLagInstanceV5v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.7			The group of objects supporting management of Link Aggregation (LAG) on Alcatel-Lucent SROS series systems.
tmnxLagInstanceV6v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.11			The group of objects supporting management of Link Aggregation (LAG) on Alcatel-Lucent SROS series systems.
tmnxLagInstanceV7v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.15			The group of objects supporting management of Link Aggregation (LAG) on Alcatel-Lucent SROS series systems.
tmnxLagInstanceV9v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.17			The group of objects supporting management of Link Aggregation (LAG) that were added in release 9.0 of the Alcatel-Lucent SROS series systems.
tmnxLagNotificationsGroup	1.3.6.1.4.1.6527.3.1.1.15.2.3			the group of notifications providing for management of Link Aggregation Group operation.
tmnxLagNotifyObjsGroup	1.3.6.1.4.1.6527.3.1.1.15.2.2			The group of objects supporting LAG notifications on Alcatel-Lucent SROS series systems.
tmnxLagNotifyObjsV10v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.18			The group of objects supporting LAG notifications on Alcatel-Lucent SROS series systems.
tmnxLagNotifyObjsV5v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.9			The group of objects supporting LAG notifications on Alcatel-Lucent SROS series systems.
tmnxLagV10v0Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.10			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxLagV10v0NotifGroup	1.3.6.1.4.1.6527.3.1.1.15.2.19			the group of notifications providing for management of Link Aggregation Group operation since version 10.0 of the Alcatel-Lucent SROS series systems.
tmnxLagV4v0Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.3			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxLagV5v0Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.4			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxLagV5v0NotifGroup	1.3.6.1.4.1.6527.3.1.1.15.2.8			the group of notifications providing for management of Link Aggregation Group operation in version 5.0 of the Alcatel-Lucent SROS series systems.
tmnxLagV6v0Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.5			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxLagV6v0NotifGroup	1.3.6.1.4.1.6527.3.1.1.15.2.12			the group of notifications providing for management of Link Aggregation Group operation in version 6.0 of the Alcatel-Lucent SROS series systems.
tmnxLagV6v1Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.6			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxLagV7v0Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.7			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxLagV7v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.13			The group of objects supporting management of Link Aggregation (LAG) on Alcatel-Lucent SROS series systems in 7.0 release.
tmnxLagV8v0Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.8			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxLagV8v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.16			The group of objects supporting management of Link Aggregation (LAG) on Alcatel-Lucent SROS series systems in 8.0 release.
tmnxLagV9v0Compliance	1.3.6.1.4.1.6527.3.1.1.15.1.9			The compliance statement for management of extended LAG capabilities on Alcatel-Lucent SROS series systems.
tmnxObsoletedObjectsV4v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.6			The group of objects that have been obsoleted in release 4.0 on Alcatel-Lucent SROS series systems.
tmnxObsoletedObjectsV7v0Group	1.3.6.1.4.1.6527.3.1.1.15.2.14			The group of objects that have been obsoleted in release 7.0 on Alcatel-Lucent SROS series systems.

RFC description

Manages IEEE 802.3ad Link Aggregation Groups (LAG) on Alcatel-Lucent SROS systems for link redundancy and load balancing.

Start monitoring Nokia/Alcatel-Lucent 7750 SR, 7450 ESS SR OS platforms (LACP/link-aggregation member-port status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-LAG-MIB