TIMETRA-ROUTE-POLICY-MIB

All MIBs › TIMETRA-ROUTE-POLICY-MIB

Organization: Alcatel-Lucent

Last Updated: 2012-02-28

Category: IP Routing, Nokia SR OS / Alcatel-Lucent 7750 SR

Description: Manages Nokia/Alcatel-Lucent 7750 SR routing policy statements, match conditions, and actions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-ROUTE-POLICY-MIB?

TIMETRA-ROUTE-POLICY-MIB is a Nokia/Alcatel-Lucent proprietary SNMP module for SROS equipment that manages and monitors routing policy objects such as AS-path lists and BGP community lists used to control route redistribution, filtering, and manipulation. It exposes operational tables of policy match objects, including named AS-path regular expressions and community member lists, along with row-status and last-changed tracking for each policy element. Its monitoring value is primarily configuration-state visibility, confirming which route-policy match conditions are actively defined and when they were last modified, which is important for troubleshooting unexpected route filtering or redistribution behavior rather than hardware health. It works alongside standard BGP MIBs and other TIMETRA routing MIBs, since these policy objects are referenced by route policies applied to BGP, OSPF, and other protocols. It is deployed on Nokia 7750 SR/7450 routers used for policy-based route control in service-provider networks. Engineers can download the TIMETRA-ROUTE-POLICY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-ROUTE-POLICY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia/Alcatel-Lucent 7750 SR / 7450 ESS routers
SROS routers with policy-based BGP/route control

Monitoring Examples

An operator polls tRPOperASPathTable/tRPOperASPathEntry to inspect the tRPOperASPathRegEx defined for a named AS-path list (tRPOperASPathName), verifying it matches the intended set of autonomous systems for route filtering. The tRPOperCommunityTable/tRPOperCommunityEntry shows configured community members (tRPOperCommunityMember) for each named community list, useful when troubleshooting why routes tagged with a specific BGP community are unexpectedly permitted or denied. Checking tRPOperASPathEntryLastChanged against a recent routing incident helps confirm whether a policy edit is the root cause.

What Can Be Monitored

AS-path list definitions and regex patterns
BGP community list membership
policy object row status
last-changed timestamps for policy entries

Imported Objects

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetAutonomousSystemNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-TC-MIB

IpAddressPrefixLength
TFCNameOrEmpty
TItemDescription
TNamedItem
TNamedItemOrEmpty
TPriority
TPriorityOrUndefined
TmnxBGPFamilyType
TmnxBgpAutonomousSystem
TmnxBgpLocalPreference
TmnxBgpPreference
TmnxEnabledDisabled
TmnxServId

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraRoutePolicyMIBModule	1.3.6.1.4.1.6527.1.1.3.17			This is the SNMP MIB module to manage and provision route policys on Alcatel-Lucent SROS equipment. Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxRoutePolicyConformance	1.3.6.1.4.1.6527.3.1.1.17
tmnxRoutePolicyCompliances	1.3.6.1.4.1.6527.3.1.1.17.1
tmnxRoutePolicy7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.3			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 4.0 release.
tmnxRoutePolicy7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.4			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 4.0 release.
tmnxRoutePolicy7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.5			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 5.0 release.
tmnxRoutePolicy7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.6			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 5.0 release.
tmnxRoutePolicy7450V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.7			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 5.0 release.
tmnxRoutePolicy7750V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.8			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 5.0 release.
tmnxRoutePolicy7450V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.9			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 5.0 release.
tmnxRoutePolicy7750V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.10			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 5.0 release.
tmnxRoutePolicy7450V9v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.11			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 9.0 release.
tmnxRoutePolicy7750V9v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.12			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 9.0 release.
tmnxRtPolicy7450V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.13			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 10.0 release.
tmnxRtPolicy7750V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.17.1.14			The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 10.0 release.
tmnxRoutePolicyGroups	1.3.6.1.4.1.6527.3.1.1.17.2
tmnxRPAdminControlObjectsGroup	1.3.6.1.4.1.6527.3.1.1.17.2.1			The group of objects supporting management of transactions applying changed Administrative values to the Operational Route Policy database on Alcatel-Lucent SROS series systems.
tmnxRPASPathObjectsGroup	1.3.6.1.4.1.6527.3.1.1.17.2.2			The group of objects supporting management of AS Paths on Alcatel-Lucent SROS series systems.
tmnxRPCommunityObjectsGroup	1.3.6.1.4.1.6527.3.1.1.17.2.3			The group of objects supporting management of route policy communities on Alcatel-Lucent SROS series systems.
tmnxRPDampingObjectsGroup	1.3.6.1.4.1.6527.3.1.1.17.2.4			The group of objects supporting management route policy damping on Alcatel-Lucent SROS series systems.
tmnxRPPrefixListObjectsGroup	1.3.6.1.4.1.6527.3.1.1.17.2.5			The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems.
tmnxRPPolicyObjectsV4v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.9			The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems.
tmnxRPPolicyEntryObjectsV4v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.10			The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS series systems 4.0 release.
tmnxRPInetPrefixListObjectsGroup	1.3.6.1.4.1.6527.3.1.1.17.2.11			The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems.
tmnxRPPolicyEntryObjectsV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.12			The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS SR series systems 5.0 release.
tmnxRPPolicyObsoleteV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.13			The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted.
tmnxRPASPathObjectsV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.14			The group of objects supporting management of AS Paths on Alcatel-Lucent SROS series systems.
tmnxRPCommunityObjectsV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.15			The group of objects supporting management of route policy communities on Alcatel-Lucent SROS series systems.
tmnxRPDampingObjectsV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.16			The group of objects supporting management route policy damping on Alcatel-Lucent SROS series systems.
tmnxRPPrefixListObjectsV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.17			The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems.
tmnxRPPolicyObjectsV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.18			The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems.
tmnxRPInetPrefixListObjectsV5v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.19			The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems.
tmnxRPPolicyObjectsV7v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.20			The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems.
tmnxRPPolicyEntryObjectsV7v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.21			The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS series systems 7.0 release.
tmnxRPPolicyObsoleteV7v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.22			The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted in Alcatel-Lucent SROS series systems 7.0 release.
tmnxRPPolicyObjectsV8v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.25			The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems that were added in release 8.0.
tmnxRPQPPBV9v0R4Group	1.3.6.1.4.1.6527.3.1.1.17.2.26			The group of objects supporting QoS policy propagation using BGP in release 9.0R4 Alcatel-Lucent SROS series systems.
tmnxRPPolicyEntryObjectsV9v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.27			The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS SR series systems 9.0 release.
tmnxRPPolicyObjectsV9v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.30			The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems that were added in release 9.0.
tmnxRPPolicyObjectsV10v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.31			The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems that were added in release 10.0.
tmnxRPASPathGroupV10v0Group	1.3.6.1.4.1.6527.3.1.1.17.2.32			The group of objects supporting management of AS-Path Groups on Alcatel-Lucent SROS series systems since release 10.0.
tRoutePolicyObjects	1.3.6.1.4.1.6527.3.1.2.17
tRPOperObjects	1.3.6.1.4.1.6527.3.1.2.17.1
tRPOperValueObjects	1.3.6.1.4.1.6527.3.1.2.17.1.1
TIM tRPOperASPathTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.1	TimeStamp	read-only	Timestamp of last change to tRPOperASPathTable. tRPOperASPathTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperASPathTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.2		not-accessible	A list of AS Path names and corresponding regular-expressions.
tRPOperASPathEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.2.1		not-accessible	Information about a particular AS Path Name. Entries are created by user, via tRPAdminASPathTable. Entries are deleted by user, via tRPAdminASPathTable. tRPAdminASPathTable entry must exist before referencing objects {tRPOperPSDefaultActionASPathName, tRPOperPSAcceptActionASPathName, tRPOperPSToCriteriaASPathName, tRPOperPSFromCriteriaASPath} can be set to refer to the tRPOperASPathName.
TAS tRPOperASPathName	1.3.6.1.4.1.6527.3.1.2.17.1.1.2.1.1	TASPathName	not-accessible	The name of the AS Path entry used to uniquely identify an AS Path.
ROW tRPOperASPathRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.2.1.2	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminASPathTable.
TRE tRPOperASPathRegEx	1.3.6.1.4.1.6527.3.1.2.17.1.1.2.1.3	TRegularExpression	read-only	The regular expression for the AS Path entry.
TIM tRPOperASPathEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.2.1.4	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperASPathEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
TIM tRPOperCommunityTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.3	TimeStamp	read-only	Timestamp of last change to tRPOperCommunityTable. tRPOperCommunityTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperCommunityTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.4		not-accessible	A table of community entries.
tRPOperCommunityEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.4.1		not-accessible	Information about a particular community member. Entries are created by user, via tRPAdminCommunityTable. Entries are deleted by user, via tRPAdminCommunityTable. There must be one entry for , or the does not exist and can not be referenced {tRPAdminPSDefaultActionCommunityName, tRPAdminPSAcceptActionCommunityName, tRPAdminPSToCriteriaCommunity tRPAdminPSFromCriteriaCommunity}.
TCO tRPOperCommunityName	1.3.6.1.4.1.6527.3.1.2.17.1.1.4.1.1	TCommunityName	not-accessible	The name of the community used as an index for this table.
TCO tRPOperCommunityMember	1.3.6.1.4.1.6527.3.1.2.17.1.1.4.1.2	TCommunityMember	not-accessible	The AS Number or Community ID of the community member. The community name and the member name uniquely identify a row in this table.
ROW tRPOperCommunityRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.4.1.3	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminCommunityTable.
TIM tRPOperCommunityEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.4.1.4	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperCommunityEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
TIM tRPOperDampingTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.5	TimeStamp	read-only	Timestamp of last change to tRPOperDampingTable. tRPOperDampingTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperDampingTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.6		not-accessible	A table of route damping control entries.
tRPOperDampingEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1		not-accessible	Information about a particular Damping entry. Entries are created by user, via tRPAdminDampingTable. Entries are deleted by user, via tRPAdminDampingTable. The entry for a damping name must exist before referring objects (tRPAdminPSDefaultActionDamping, tRPAdminPSAcceptActionDamping) can be set to that name.
TDA tRPOperDampingName	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1.1	TDampingName	not-accessible	The name of the damping entry used to uniquely identify a row in this table.
ROW tRPOperDampingRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1.2	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminDampingTable.
U32 tRPOperDampingHalfLife	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1.3	Unsigned32	read-only	Specifies the half-life, in minutes, for a routes figure-of-merit after it has been dampened. If a route's half-life is set to 15 minutes and has a figure-of-merit of 1500, after 15 minutes, the route's figure-of-merit will have decayed to 750. Set to 0 to disable.
U32 tRPOperDampingMaxSuppress	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1.4	Unsigned32	read-only	Specifies the maximum amount of time, in minutes, that a route can be suppressed for. Set to 0 to disable.
U32 tRPOperDampingReuse	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1.5	Unsigned32	read-only	Specifies the reuse threshold. If a route's figure-of-merit falls below the reuse threshold, the route can be reused. Set to 0 to disable.
U32 tRPOperDampingSuppress	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1.6	Unsigned32	read-only	Specifies the suppress threshold. If a route's figure-of-merit goes above the suppress threshold, the route should be suppressed. Set to 0 to disable.
TIM tRPOperDampingEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.6.1.7	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperDampingEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
TIM tRPOperPrefixListTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.7	TimeStamp	read-only	Timestamp of last change to tRPOperPrefixListTable. tRPOperPrefixListTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperPrefixListTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.8		not-accessible	A table of prefix lists.
tRPOperPrefixListEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1		not-accessible	Information about a particular prefix list. Entries are created by user via tRPAdminPrefixListTable. Entries are deleted by user via tRPAdminPrefixListTable. A prefix list name entry must exist before referring objects (tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSToCriteriaPrefixList1 - 5 tRPAdminPSFromCriteriaPrefixList1 - 5) can be set to that name.
TPR tRPOperPrefixListName	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.1	TPrefixListName	not-accessible	The name of the prefix list entry.
IP tRPOperPrefixListIpPrefix	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.2	IpAddress	not-accessible	The IP prefix of the prefix list entry.
ADR tRPOperPrefixListMask	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.3	IpAddressPrefixLength	not-accessible	The IP mask length of the prefix list entry.
ROW tRPOperPrefixListRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.4	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPrefixListTable.
INT tRPOperPrefixListType	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.5	INTEGER	not-accessible	The type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPOperPrefixListBeginLength and less than or equal to the length defined by tRPOperPrefixListThroughLength in order for an entry to be considered a match.
ADR tRPOperPrefixListThroughLength	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.6	IpAddressPrefixLength	read-only	When tRPOperPrefixListType set to through(3), the mask length to use. Must be larger than tRPOperPrefixListMask.
TIM tRPOperPrefixListEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.7	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperPrefixListEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
ADR tRPOperPrefixListBeginLength	1.3.6.1.4.1.6527.3.1.2.17.1.1.8.1.8	IpAddressPrefixLength	read-only	When tRPOperPrefixListType set to range(4), the mask length to use as the lower limit for the mask range. Must be larger than tRPOperPrefixListMask and less than tRPOperPrefixListThroughLength.
TIM tRPOperPolicyStatementTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.9	TimeStamp	read-only	Timestamp of last change to tRPOperPolicyStatementTable. tRPOperPolicyStatementTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperPolicyStatementTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.10		not-accessible	Control table for policy-statements.
tRPOperPolicyStatementEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.10.1		not-accessible	Information about a particular policy-statement. Entries are created by user via tRPAdminPolicyStatementTable. Entries are deleted by user via tRPAdminPolicyStatementTable.
TPO tRPOperPolicyStatementName	1.3.6.1.4.1.6527.3.1.2.17.1.1.10.1.1	TPolicyStatementName	not-accessible	The name of this policy statement that uniquely identifies an entry in this table.
ROW tRPOperPolicyStatementRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.10.1.2	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPolicyStatementTable.
TIT tRPOperPolicyStatementDescription	1.3.6.1.4.1.6527.3.1.2.17.1.1.10.1.3	TItemDescription	read-only	Description for this policy statement.
TPO tRPOperPolicyStatementDefaultAction	1.3.6.1.4.1.6527.3.1.2.17.1.1.10.1.4	TPolicyEntryAction	read-only	The default-action for the policy statement indicates what happens to the route if none of the policy statement entries match.
TIM tRPOperPolicyStatementEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.10.1.5	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperPolicyStatementEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
TIM tRPOperPSDefaultActionParamsTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.11	TimeStamp	read-only	Timestamp of last change to tRPOperPSDefaultActionParamsTable. tRPOperPSDefaultActionParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperPSDefaultActionParamsTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.12		not-accessible	Default action parameters for a policy-statement.
tRPOperPSDefaultActionParamsEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1		not-accessible	Default action information about a particular policy statement. These parameters are applied when the default action for the policy statement is 'accept' (tRPOperPolicyStatementDefaultAction == accept(1)). These parameters are ignored when default action for the policy statement is 'reject' (tRPOperPolicyStatementDefaultAction == reject(2)). Entries are created when a policy statement is created. Entries are deleted when a policy statement is destroyed.
TPO tRPOperPSDefaultActionASPath	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.1	TPolicyEntryEdit	read-only	The AS Path rewrite information for the route.
TAS tRPOperPSDefaultActionASPathName	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.2	TASPathName	read-only	The AS Path name to use for add, remove, or replace operation specified by tRPOperPSDefaultActionASPath. Ignored when tRPOperPSDefaultActionASPath is none(1).
TMN tRPOperPSDefaultActionASPathPrependAS	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.3	TmnxBgpAutonomousSystem	read-only	AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPOperPSDefaultActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPOperPSDefaultActionASPathPend.
INT tRPOperPSDefaultActionASPathPrependCount	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.4	INTEGER	read-only	Number of times tRPOperPSDefaultActionASPathPend is prepended to the AS-Path attribute of the route. Set to zero to disable.
TPO tRPOperPSDefaultActionCommunity1	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.5	TPolicyEntryEdit	read-only	How to apply tRPOperPSDefaultActionCommunityName1 to the communities for the route. Set to none(1) to disable this feature.
TCO tRPOperPSDefaultActionCommunityName1	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.6	TCommunityName	read-only	Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPOperPSDefaultActionCommunity1 is none(1)
TPO tRPOperPSDefaultActionCommunity2	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.7	TPolicyEntryEdit	read-only	How to apply tRPOperPSDefaultActionCommunityName2 to the communities for the route. Set to none(1) to disable this feature.
TCO tRPOperPSDefaultActionCommunityName2	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.8	TCommunityName	read-only	Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPOperPSDefaultActionCommunity2 is none(1)
TPO tRPOperPSDefaultActionOrigin	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.9	TPolicyEntryCriteriaOrigin	read-only	The value of tRPOperPSDefaultActionOrigin indicates the origin of the route exported into BGP if it does not match an entry.
T/F tRPOperPSDefaultActionLocalPreferenceSet	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.10	TruthValue	read-only	When set to true(1), use the value of tRPOperPSDefaultActionLocalPreference for local preference.
TMN tRPOperPSDefaultActionLocalPreference	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.11	TmnxBgpLocalPreference	read-only	Local preference to apply to the route. Set tRPOperPSDefaultActionLocalPreferenceSet to false(2) to disable.
TPO tRPOperPSDefaultActionMetric	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.12	TPolicyEntryEdit	read-only	Action for tRPOperPSDefaultActionMetricValue.
U32 tRPOperPSDefaultActionMetricValue	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.13	Unsigned32	read-only	Add, subtract, or set metric value. Ignored when tRPOperPSDefaultActionMetric is none(1).
TMN tRPOperPSDefaultActionPreference	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.15	TmnxBgpPreference	read-only	Preference to apply to the route.
TDA tRPOperPSDefaultActionDamping	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.16	TDampingName	read-only	Damping to apply to route. Set to empty string to disable.
T/F tRPOperPSDefaultActionNextHopSelf	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.17	TruthValue	read-only	The value of tRPOperPSDefaultActionNextHopSelf indicates the next-hop-self on the route. Next-hop-self cannot be 'true' when the next-hop object 'tRPOperPSDefActInetNextHop' has a valid IP address. If tRPOperPSDefaultActionNextHopSelf has a value of 'true' then tRPOperPSDefActInetNextHop object is disabled.
IP tRPOperPSDefaultActionNextHop	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.18	IpAddress	read-only	Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'.
TPO tRPOperPSDefaultActionTag	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.19	TPolicyActionTag	read-only	The value of tRPOperPSDefaultActionTag indicates the operational tag for the route. A value of 0 for tRPAdminPSDefaultActionTag indicates that tagging is disabled.
TOS tRPOperPSDefaultActionOspfType	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.20	TOspfRouteType	read-only	OSPF route type for the route.
TIM tRPOperPSDefaultActionParamsEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.21	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperPSDefaultActionParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
IPt tRPOperPSDefActInetNextHopType	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.22	InetAddressType	read-only	The value of tRPOperPSDefActInetNextHopType indicates the type of tRPOperPSDefActInetNextHop address, as defined in the InetAddress MIB.
IP tRPOperPSDefActInetNextHop	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.23	InetAddress	read-only	The value of tRPOperPSDefActInetNextHop indicates the next-hop IP address in the route. The object tRPOperPSDefActInetNextHop is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSDefActInetNextHopType object. Next-hop cannot be a valid IP address when next-hop-self object 'tRPOperPSDefaultActionNextHopSelf' is set to 'true'. If next-hop is a valid IP address then tRPOperPSDefaultActionNextHopSelf is set to 'false'. tRPOperPSDefActInetNextHop object replaces tRPOperPSDefaultActionNextHop that supports only IPv4 address style next-hop.
INE tRPOperPSDefaultActionASPathPend	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.24	InetAutonomousSystemNumber	read-only	The value of tRPOperPSDefaultActionASPathPend indicates the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPOperPSDefaultActionASPathPrependCount is zero.
TMN tRPOperPSDefActMcRedirSvcId	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.30	TmnxServId	read-only	The value of tRPOperPSDefActMcRedirSvcId indicates the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
NUM tRPOperPSDefActMcRedirIfIndex	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.31	InterfaceIndexOrZero	read-only	The value of tRPOperPSDefActMcRedirIfIndex indicates the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
TPO tRPOperPSDefActionMetricSource	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.32	TPolicyActionMetricSource	read-only	The value of tRPOperPSDefActionMetricSource indicates the source of the default action metric. The value 'igpCost(1)' means that the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route and the value of the object tRPOperPSDefaultActionMetricValue is ignored. The value 'metricVal(2)' means the metric value is the value of tRPOperPSDefaultActionMetricValue.
TPO tRPOperPSDefActionAigpMetric	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.33	TPolicyEntryAigpMetricEdit	read-only	The value of tRPOperPSDefActionAigpMetric indicates the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActnAigpMetricVal is ignored.
U32 tRPOperPSDefActnAigpMetricVal	1.3.6.1.4.1.6527.3.1.2.17.1.1.12.1.34	Unsigned32	read-only	The value of tRPOperPSDefActnAigpMetricVal indicates the value to be added or set for the route AIGP(Accumulated IGP) metric. When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActnAigpMetricVal is ignored.
TIM tRPOperPSParamsTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.13	TimeStamp	read-only	Timestamp of last change to tRPOperPSParamsTable. tRPOperPSParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperPSParamsTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.14		not-accessible	A table of policy statement entries.
tRPOperPSParamsEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.14.1		not-accessible	Information about a particular policy statement entry. Entries are created when a policy statement parameters entry is created. Entries are deleted when a policy statement parameters entry is destroyed.
TPO tRPOperPSNameEntryIndex	1.3.6.1.4.1.6527.3.1.2.17.1.1.14.1.1	TPolicyStatementEntryID	not-accessible	Identifier for this policy statement entry.
ROW tRPOperPSParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.14.1.2	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPSParamsTable.
TIT tRPOperPSParamsDescription	1.3.6.1.4.1.6527.3.1.2.17.1.1.14.1.3	TItemDescription	read-only	Description for this policy statement entry.
TPO tRPOperPSParamsAction	1.3.6.1.4.1.6527.3.1.2.17.1.1.14.1.4	TPolicyEntryAction	read-only	The action to take when a route matches this policy statement entry's to or from criteria.
TIM tRPOperPSParamsEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.14.1.5	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperPSParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
TIM tRPOperPSAcceptActionParamsTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.15	TimeStamp	read-only	Timestamp of last change to tRPOperPSAcceptActionParamsTable. tRPOperPSAcceptActionParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperPSAcceptActionParamsTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.16		not-accessible	Accept-action parameters for a policy-statement.
tRPOperPSAcceptActionParamsEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1		not-accessible	Accept-action information for a policy-statement entry. If the policy statement entry action is 'reject' then all of these objects are ignored. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed. To Create or destroy entries in this table, use the policy statement entry administrative table (tRPAdminPSParamsTable).
TPO tRPOperPSAcceptActionASPath	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.1	TPolicyEntryEdit	read-only	The AS Path rewrite information for the route.
TAS tRPOperPSAcceptActionASPathName	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.2	TASPathName	read-only	AS Path Name to add, remove, or replace. Ignored when tRPOperPSAcceptActionASPath is none(1)
TMN tRPOperPSAcceptActionASPathPrependAS	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.3	TmnxBgpAutonomousSystem	read-only	AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPOperPSAcceptActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPOperPSAcceptActionASPathPend.
INT tRPOperPSAcceptActionASPathPrependCount	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.4	INTEGER	read-only	Number of times to prepend tRPOperPSAcceptActionASPathPend to the route. Set to zero to disable this feature.
TPO tRPOperPSAcceptActionCommunity1	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.5	TPolicyEntryEdit	read-only	How to apply tRPOperPSAcceptActionCommunityName1 to the route.
TCO tRPOperPSAcceptActionCommunityName1	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.6	TCommunityName	read-only	Community to apply to the route. Ignored when tRPOperPSAcceptActionCommunity1 is set to none(1).
TPO tRPOperPSAcceptActionCommunity2	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.7	TPolicyEntryEdit	read-only	How to apply tRPOperPSAcceptActionCommunityName2 to the route.
TCO tRPOperPSAcceptActionCommunityName2	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.8	TCommunityName	read-only	Community to apply to the route. Ignored when tRPOperPSAcceptActionCommunity2 is set to none(1).
TPO tRPOperPSAcceptActionOrigin	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.9	TPolicyEntryCriteriaOrigin	read-only	The value of tRPOperPSAcceptActionOrigin indicates the origin of the route exported into BGP if it matches an entry.
T/F tRPOperPSAcceptActionLocalPreferenceSet	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.10	TruthValue	read-only	When set to true(1), use tRPOperPSAcceptActionLocalPreference for the local preference for the route.
TMN tRPOperPSAcceptActionLocalPreference	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.11	TmnxBgpLocalPreference	read-only	Local preference for the route. Ignored when tRPOperPSAcceptActionLocalPreferenceSet is false(2).
TPO tRPOperPSAcceptActionMetric	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.12	TPolicyEntryEdit	read-only	How to apply tRPOperPSAcceptActionMetricValue to the route.
U32 tRPOperPSAcceptActionMetricValue	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.13	Unsigned32	read-only	Value to add, subtract, or set for the route metric. Ignored when tRPOperPSAcceptActionMetric is none(1).
TMN tRPOperPSAcceptActionPreference	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.15	TmnxBgpPreference	read-only	Preference to set in route.
TDA tRPOperPSAcceptActionDamping	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.16	TDampingName	read-only	Damping to apply to route. Set to empty string to disable.
T/F tRPOperPSAcceptActionNextHopSelf	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.17	TruthValue	read-only	The value of tRPOperPSAcceptActionNextHopSelf indicates the next-hop-self on the route. Next-hop-self cannot be 'true' when the next-hop object 'tRPOperPSAcptActInetNextHop' has a valid IP address. If tRPOperPSAcceptActionNextHopSelf has a value of 'true' then tRPOperPSAcptActInetNextHop object is disabled.
IP tRPOperPSAcceptActionNextHop	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.18	IpAddress	read-only	Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'.
TPO tRPOperPSAcceptActionTag	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.19	TPolicyActionTag	read-only	The value of tRPOperPSAcceptActionTag indicates the operational tag for the route. A value of 0 for tRPAdminPSAcceptActionTag indicates that tagging is disabled.
TOS tRPOperPSAcceptActionOspfType	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.20	TOspfRouteType	read-only	OSPF route type to set in route.
TIM tRPOperPSAcceptActionParamsEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.21	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperPSAcceptActionParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
IPt tRPOperPSAcptActInetNextHopType	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.22	InetAddressType	read-only	The value of tRPOperPSAcptActInetNextHopType indicates the type of tRPOperPSAcptActInetNextHop address, as defined in the InetAddress MIB.
IP tRPOperPSAcptActInetNextHop	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.23	InetAddress	read-only	The value of tRPOperPSAcptActInetNextHop indicates the next-hop IP address in the route. Next-hop is disabled if the value of tRPOperPSAcptActInetNextHopType is 'ipv6' and the value of tRPOperPSAcptActInetNextHop is ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSAcptActInetNextHopType object. Next-hop cannot be a valid IP address when next-hop-self object 'tRPOperPSAcceptActionNextHopSelf' is set to 'true'. If next-hop is a valid IP address then tRPOperPSAcceptActionNextHopSelf is set to 'false'. tRPOperPSAcptActInetNextHop object replaces tRPOperPSAcceptActionNextHop that supports only IPv4 address style next-hop.
INE tRPOperPSAcceptActionASPathPend	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.24	InetAutonomousSystemNumber	read-only	The value of tRPOperPSAcceptActionASPathPend indicates the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPOperPSAcceptActionASPathPrependCount is zero.
TMN tRPOperPSAcptActMcRedirSvcId	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.30	TmnxServId	read-only	The value of tRPOperPSAcptActMcRedirSvcId indicates the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
NUM tRPOperPSAcptActMcRedirIfIndex	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.31	InterfaceIndexOrZero	read-only	The value of tRPOperPSAcptActMcRedirIfIndex indicates the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
TPO tRPOperPSAcptActnMetricSource	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.32	TPolicyActionMetricSource	read-only	The value of tRPOperPSAcptActnMetricSource indicates the source of the accept action metric. The value 'igpCost(1)' means that the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route and the value of the object tRPOperPSAcceptActionMetricValue is ignored. The value 'metricVal(2)' means the metric value is the value of tRPOperPSAcceptActionMetricValue.
TPO tRPOperPSAcptActionAigpMetric	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.33	TPolicyEntryAigpMetricEdit	read-only	The value of tRPOperPSAcptActionAigpMetric indicates the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActnAigpMetricVal is ignored.
U32 tRPOperPSAcptActnAigpMetricVal	1.3.6.1.4.1.6527.3.1.2.17.1.1.16.1.34	Unsigned32	read-only	The value of tRPOperPSAcptActnAigpMetricVal indicates the value to be added or set for the route AIGP(Accumulated IGP) metric. When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActnAigpMetricVal is ignored.
TIM tRPOperPSToCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.17	TimeStamp	read-only	Timestamp of last change to tRPOperPSToCriteriaTable. tRPOperPSToCriteriaTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperPSToCriteriaTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.18		not-accessible	A table of policy statement entry 'to' criteria
tRPOperPSToCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1		not-accessible	Information about a policy statement entry's -to- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed.
TPO tRPOperPSToCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.1	TPolicyStatementEntryID	not-accessible	The policy statement entry ID
ROW tRPOperPSToCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.2	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPSToCriteriaTable.
TRO tRPOperPSToCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.3	TRoutePolicyProtocol	read-only	The protocol name to match on. Set to none(1) to disable.
IP tRPOperPSToCriteriaNeighborIpAddr	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.4	IpAddress	read-only	The IP address of neighbor to match on. Set to 0.0.0.0 to disable.
TPR tRPOperPSToCriteriaNeighborPrefixList	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.5	TPrefixListName	read-only	The name of a neighbor prefix list to match on. Set to empty string to disable.
TIM tRPOperPSToCriteriaEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.6	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperPSToCriteriaEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
TIS tRPOperPSToCriteriaIsisLevel	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.7	TIsisLevel	read-only	The value for tRPOperPSToCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured.
TPR tRPOperPSToCriteriaPrefixList1	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.8	TPrefixListName	read-only	The value of tRPOperPSToCriteriaPrefixList1 specifies the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPOperPSToCriteriaPrefixList2	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.9	TPrefixListName	read-only	The value of tRPOperPSToCriteriaPrefixList2 specifies the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPOperPSToCriteriaPrefixList3	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.10	TPrefixListName	read-only	The value of tRPOperPSToCriteriaPrefixList3 specifies the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPOperPSToCriteriaPrefixList4	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.11	TPrefixListName	read-only	The value of tRPOperPSToCriteriaPrefixList4 specifies the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPOperPSToCriteriaPrefixList5	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.12	TPrefixListName	read-only	The value of tRPOperPSToCriteriaPrefixList5 specifies the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
IPt tRPOperPSToCritNbrInetAddrType	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.13	InetAddressType	read-only	The value of tRPOperPSToCritNbrInetAddrType indicates the type of tRPOperPSToCritNbrInetAddr address, as defined in the InetAddress MIB.
IP tRPOperPSToCritNbrInetAddr	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.14	InetAddress	read-only	The value of tRPOperPSToCritNbrInetAddr indicates the IP address of neighbor to match on. The object tRPOperPSToCritNbrInetAddr is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSToCritNbrInetAddrType object. tRPOperPSToCritNbrInetAddr object replaces tRPOperPSToCriteriaNeighborIpAddr that supports only IPv4 address style neighbor.
U32 tRPOperPSToCriteriaInstanceId	1.3.6.1.4.1.6527.3.1.2.17.1.1.18.1.15	Unsigned32	read-only	The value of tRPOperPSToCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPOperPSToCriteriaInstanceId is 4294967295, all instances of OSPF protocol are leaked into BGP.
TIM tRPOperPSFromCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.19	TimeStamp	read-only	Timestamp of last change to tRPOperPSFromCriteriaTable. tRPOperPSFromCriteriaTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperPSFromCriteriaTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.20		not-accessible	A table of from filter criteria for each policy-statement entry.
tRPOperPSFromCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1		not-accessible	Information about policy statement entry -from- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed.
TPO tRPOperPSFromCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.1	TPolicyStatementEntryID	not-accessible	The policy statement entry ID
ROW tRPOperPSFromCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.2	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPSFromCriteriaTable.
TRO tRPOperPSFromCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.3	TRoutePolicyProtocol	read-only	The protocol name to match on. Set to none(1) to disable.
IP tRPOperPSFromCriteriaNeighborIpAddr	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.4	IpAddress	read-only	The IP address of neighbor to match on. Set to 0.0.0.0 to disable.
TPR tRPOperPSFromCriteriaNeighborPrefixList	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.5	TPrefixListName	read-only	The name of a neighbor prefix list to match on. Set to empty string to disable.
TPR tRPOperPSFromCriteriaPrefixList1	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.6	TPrefixListName	read-only	The name of the first prefix list to match on. Set to empty string to disable.
TPR tRPOperPSFromCriteriaPrefixList2	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.7	TPrefixListName	read-only	The name of the second prefix list to match on. Set to empty string to disable.
TPR tRPOperPSFromCriteriaPrefixList3	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.8	TPrefixListName	read-only	The name of the third prefix list to match on. Set to empty string to disable.
TPR tRPOperPSFromCriteriaPrefixList4	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.9	TPrefixListName	read-only	The name of the fourth prefix list to match on. Set to empty string to disable.
TPR tRPOperPSFromCriteriaPrefixList5	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.10	TPrefixListName	read-only	The name of the fifth prefix list to match on. Set to empty string to disable.
TAS tRPOperPSFromCriteriaASPath	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.11	TASPathName	read-only	The name of the AS Path to match on. Set to empty string to disable.
TCO tRPOperPSFromCriteriaCommunity	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.12	TCommunityName	read-only	The name of the community to match on. Set to empty string to disable.
TPO tRPOperPSFromCriteriaOrigin	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.13	TPolicyEntryCriteriaOrigin	read-only	The value of tRPOperPSFromCriteriaOrigin indicates the route match criterion for an entry.
TOS tRPOperPSFromCriteriaOspfRouteType	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.14	TOspfRouteType	read-only	The OSPF route type to match on. Set to zero to disable.
TIM tRPOperPSFromCriteriaEntryLastChanged	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.15	TimeStamp	read-only	Timestamp of last change to this entry. tRPOperPSFromCriteriaEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
IP tRPOperPSFromCriteriaArea	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.16	IpAddress	read-only	Used when redistributing OSPF routes into other protocols. Specifies the OSPF area that must be matched in filtered routes.
T/F tRPOperPSFromCriteriaAreaConfigured	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.17	TruthValue	read-only	Specifies if the tRPOperPSFromCriteriaArea has been configured
TIS tRPOperPSFromCriteriaIsisLevel	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.18	TIsisLevel	read-only	The value for tRPOperPSFromCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured.
T/F tRPOperPSFromCriteriaIsisExternal	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.19	TruthValue	read-only	When tRPOperPSFromCriteriaIsisExternal is 'true', match only External IS-IS routes. If 'false', match all routes. External IS-IS routes are those routes that have been learned from outside the IS-IS domain.
TPR tRPOperPSFromCriteriaIgmpHostPrefixList	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.20	TPrefixListName	read-only	tRPOperPSFromCriteriaIgmpHostPrefixList contains the name of the prefix list that is used to match the IGMP host IP address. The value of the object will be an empty string if it not set.
TPR tRPOperPSFromCriteriaGrpAddrPrefixList	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.21	TPrefixListName	read-only	tRPOperPSFromCriteriaGrpAddrPrefixList contains the name of the prefix list that is used to match the multicast group address. The value of the object will be an empty string if it not set.
IP tRPOperPSFromCriteriaSrcAddr	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.22	IpAddress	read-only	tRPOperPSFromCriteriaSrcAddr contains the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP. The value of this object will be 0.0.0.0 if it is not set.
TNA tRPOperPSFromCriteriaInterface	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.23	TNamedItemOrEmpty	read-only	tRPOperPSFromCriteriaInterface contains the name of the interface to match on. PIM Bootstrap route policy will use this object to accept/reject bootstrap messages coming on the interface specified by this object. The value of the object will be an empty string if it not set.
TPO tRPOperPSFromCriteriaTag	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.24	TPolicyActionTag	read-only	The value of tRPOperPSFromCriteriaTag indicates the operational tag to match on. It will only be valid when tRPOperPSFromCriteriaMatchTag is enabled which indicates that route matching based on tags is enabled. A value of 0 for tRPOperPSFromCriteriaTag when tRPOperPSFromCriteriaMatchTag is enabled indicates untagged routes are matched.
IPt tRPOperPSFromCritNbrInetAddrType	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.25	InetAddressType	read-only	The value of tRPOperPSFromCritNbrInetAddrType indicates the type of tRPOperPSFromCritNbrInetAddr address, as defined in the InetAddress MIB.
IP tRPOperPSFromCritNbrInetAddr	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.26	InetAddress	read-only	The value of tRPOperPSFromCritNbrInetAddr indicates the IP address of neighbor to match on. The object tRPOperPSFromCritNbrInetAddr is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of the tRPOperPSFromCritNbrInetAddrType object. tRPOperPSFromCritNbrInetAddr object replaces tRPOperPSFromCriteriaNeighborIpAddr that supports only IPv4 address style neighbor.
IPt tRPOperPSFromCritSrcInetAddrType	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.27	InetAddressType	read-only	The value of tRPOperPSFromCritSrcInetAddrType indicates the type of tRPOperPSFromCritSrcInetAddr address, as defined in the InetAddress MIB.
IP tRPOperPSFromCritSrcInetAddr	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.28	InetAddress	read-only	The value of tRPOperPSFromCritSrcInetAddr indicates the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP and is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of the tRPOperPSFromCritSrcInetAddrType object. tRPOperPSFromCritSrcInetAddr object replaces tRPOperPSFromCriteriaSrcAddr that supports only IPv4 address style source.
TMN tRPOperPSFromCriteriaFamily	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.29	TmnxBGPFamilyType	read-only	The bits set in the value of tRPAdminPSFromCriteriaFamily indicate the address families that this condition would match against.
U32 tRPOperPSFromCriteriaInstanceId	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.30	Unsigned32	read-only	The value of tRPOperPSFromCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPOperPSFromCriteriaInstanceId is 4294967295, all instances of OSPF protocol are leaked into BGP.
TMN tRPOperPSFromCriteriaMatchTag	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.31	TmnxEnabledDisabled	read-only	The value of tRPOperPSFromCriteriaMatchTag indicates if tag matching is enabled or disabled.
TPO tRPOperPSFromCriteriaState	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.32	TPolicyEntryCriteriaState	read-only	The value of tRPOperPSFromCriteriaState indicates the route state match criterion for this entry.
TNA tRPOperPSFromCritASPathGroup	1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.33	TNamedItemOrEmpty	read-only	The value of tRPOperPSFromCritASPathGroup indicates the AS-Path Group match criterion for this entry.
TIM tRPOperInetPrefixListTblLastChg	1.3.6.1.4.1.6527.3.1.2.17.1.1.21	TimeStamp	read-only	The value of tRPOperInetPrefixListTblLastChg indicates the timestamp of last change to tRPOperInetPrefixListTable. tRPOperInetPrefixListTblLastChg is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
tRPOperInetPrefixListTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.22		not-accessible	The table of IPv4 and IPv6 operational prefix lists.
tRPOperInetPrefixListEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1		not-accessible	Each row entry in the tRPOperInetPrefixListTable represents information about a particular prefix list. Entries are created by user via tRPAdminInetPrefixListTable. Entries are deleted by user via tRPAdminInetPrefixListTable. A prefix list name entry must exist before referring objects (tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSToCriteriaPrefixList1 - 5, tRPAdminPSFromCriteriaPrefixList1 - 5) can be set to that name.
TPR tRPOperInetPrefixListName	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.1	TPrefixListName	not-accessible	The value of tRPOperInetPrefixListName indicates the name of the prefix list entry.
IPt tRPOperInetPrefixListPrefixType	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.2	InetAddressType	not-accessible	The value of tRPOperInetPrefixListPrefixType indicates the address type of tRPOperInetPrefixListPrefix.
IP tRPOperInetPrefixListPrefix	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.3	InetAddress	not-accessible	The value of tRPOperInetPrefixListPrefix indicates the IP prefix of the prefix list entry.
ADR tRPOperInetPrefixListPrefixLen	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.4	InetAddressPrefixLength	not-accessible	The value of tRPOperInetPrefixListPrefixLen indicates the IP prefix length of the prefix list entry.
INT tRPOperInetPrefixListType	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.5	INTEGER	not-accessible	The value of tRPOperInetPrefixListType indicates the type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPOperInetPrefixListBeginLen and less than or equal to the length defined by tRPOperInetPrefixListThroughLen in order for an entry to be considered a match.
ROW tRPOperInetPrefixListRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.6	RowStatus	read-only	RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminInetPrefixListTable.
ADR tRPOperInetPrefixListThroughLen	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.7	InetAddressPrefixLength	read-only	The value of tRPOperInetPrefixListThroughLen indicates the prefix length to use when tRPOperInetPrefixListType set to through(3). The value must be larger than tRPOperInetPrefixListPrefixLen.
TIM tRPOperInetPrefixListLastChg	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.8	TimeStamp	read-only	The value of tRPOperInetPrefixListLastChg indicates the timestamp of last change to this entry. tRPOperInetPrefixListLastChg is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead.
ADR tRPOperInetPrefixListBeginLen	1.3.6.1.4.1.6527.3.1.2.17.1.1.22.1.9	InetAddressPrefixLength	read-only	The value of tRPOperInetPrefixListBeginLen indicates the prefix length to use as the lower limit for the prefix range when tRPOperInetPrefixListType set to range(4). The value must be larger than tRPOperInetPrefixListPrefixLen and less than tRPOperInetPrefixListThroughLen.
tRPOperCommunityExprTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.25		not-accessible	A table of community entries.
tRPOperCommunityExprEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.25.1		not-accessible	Information about a particular community member. Entries are created by user, via tRPAdminCommunityExprTable. Entries are deleted by user, via tRPAdminCommunityExprTable.
TCO tRPOperCommunityExprName	1.3.6.1.4.1.6527.3.1.2.17.1.1.25.1.1	TCommunityName	not-accessible	The value of object tRPOperCommunityExprName indicates the name of the community used as an index for this table.
ROW tRPOperCommunityExprRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.25.1.2	RowStatus	read-only	The value of object tRPOperCommunityExprRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminCommunityExprTable.
TCO tRPOperCommunityExprString1	1.3.6.1.4.1.6527.3.1.2.17.1.1.25.1.3	TCommunityExpression	read-only	The value of object tRPOperCommunityExprString1 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression.
TCO tRPOperCommunityExprString2	1.3.6.1.4.1.6527.3.1.2.17.1.1.25.1.4	TCommunityExpression	read-only	The value of object tRPOperCommunityExprString2 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression.
TCO tRPOperCommunityExprString3	1.3.6.1.4.1.6527.3.1.2.17.1.1.25.1.5	TCommunityExpression	read-only	The value of object tRPOperCommunityExprString3 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression.
TCO tRPOperCommunityExprString4	1.3.6.1.4.1.6527.3.1.2.17.1.1.25.1.6	TCommunityExpression	read-only	The value of object tRPOperCommunityExprString4 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression.
tRPOperASPathGroupTable	1.3.6.1.4.1.6527.3.1.2.17.1.1.26		not-accessible	The table of AS-Path Groups.
tRPOperASPathGroupEntry	1.3.6.1.4.1.6527.3.1.2.17.1.1.26.1		not-accessible	Each row entry in the tRPOperASPathGroupTable represents information about a particular AS-Path Group. Entries are created by user via tRPAdminASPathGroupTable. Entries are deleted by user via tRPAdminASPathGroupTable.
TNA tRPOperASPathGroupName	1.3.6.1.4.1.6527.3.1.2.17.1.1.26.1.1	TNamedItem	not-accessible	The value of tRPOperASPathGroupName indicates the name of the AS-Path Group.
U32 tRPOperASPathGroupEntryIndex	1.3.6.1.4.1.6527.3.1.2.17.1.1.26.1.2	Unsigned32	not-accessible	The value of tRPOperASPathGroupEntryIndex indicates the index of the entry in the AS-Path Group.
ROW tRPOperASPathGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.17.1.1.26.1.3	RowStatus	read-only	The value of tRPOperASPathGroupRowStatus indicates the RowStatus for this entry. To create or destroy entries in this table, use the tRPAdminASPathGroupTable.
TAS tRPOperASPathGroupASPathName	1.3.6.1.4.1.6527.3.1.2.17.1.1.26.1.4	TASPathName	read-only	The value of tRPOperASPathGroupASPathName indicates the name of the AS-Path from the tRPOperASPathTable.
tRPAdminObjects	1.3.6.1.4.1.6527.3.1.2.17.2
tRPAdminControlObjects	1.3.6.1.4.1.6527.3.1.2.17.2.1
STR tRPAdminOwner	1.3.6.1.4.1.6527.3.1.2.17.2.1.1	DisplayString	read-write	Who has last initialized the administrative tables, who is making all the changes, and who is expected to either commit or re-initialize (ABORT-TRANSACTION). tRPAdminOwner is advisory only. Before beginning a transaction, read tRPAdminOwner. If it is empty then proceed with the configuration. Set tRPAdminOwner after setting tRPAdminControlApply so that other users will be advised to not make changes to the Admin tables. Agent sets tRPAdminOwner to empty string after tRPAdminControlApply is set - either by user initializing or committing, or by agent timing out the uncommitted transactions (tRPAdminLastSetTimer).
INT tRPAdminControlApply	1.3.6.1.4.1.6527.3.1.2.17.2.1.2	INTEGER	read-write	This object controls the use of tRPAdminValueObjects tables. This object always reads none(1). When set to initialize(2), the objects in tRPAdminValueObjects tables are set to the current Operational values, from the corresponding tRPOperValueObjects tables. Any uncommitted changes are lost, so setting this value corresponds to both BEGIN-TRANSACTION and ABORT-TRANSACTION. When set to commit(3) (END-TRANSACTION), all of the objects from tRPAdminValueObjects tables are copied to the corresponding tRPOperValueObjects table objects. Then, all routes are re-evaluated with the new policies. Later arriving routes are evaluated with the new policies. In this way, the (expensive) route re-evaluation can be performed at one time, with a coherent route policy configuration.
NUM tRPAdminLastSetTimer	1.3.6.1.4.1.6527.3.1.2.17.2.1.3	TimeInterval	read-only	The time remaining until the agent re-initializes the administrative tables. If tRPAdminControlApply is not set to commit(3) within tRPAdminLastSetTimeout centiseconds, the agent will set it to initialize(2) and all uncommitted changes will be lost. This way, uncommitted changes from failed (uncompleted) change sets will eventually be removed, and another transaction can safely begin. This object is reset to tRPAdminLastSetTimeout after SNMP SET operation to any of the tRPAdminValueObjects tables.
NUM tRPAdminLastSetTimeout	1.3.6.1.4.1.6527.3.1.2.17.2.1.4	TimeInterval	read-write	Timeout for tRPAdminLastSetTimer. The value zero is not allowed.
tRPAdminValueObjects	1.3.6.1.4.1.6527.3.1.2.17.2.2
tRPAdminASPathTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.1		not-accessible	A list of AS Path names and corresponding regular-expressions.
tRPAdminASPathEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.1.1		not-accessible	Information about a particular AS Path Name. Entries are created by user. Entries are deleted by user. Entry must exist before referencing objects can be set to refer to the tRPAdminASPathName.
TAS tRPAdminASPathName	1.3.6.1.4.1.6527.3.1.2.17.2.2.1.1.1	TASPathName	not-accessible	The name of the AS Path entry used to uniquely identify an AS Path.
ROW tRPAdminASPathRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.1.1.2	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4) and destroy(6). To create a row, set this object to createAndGo(4). The value of tRPAdminASPathRegEx must also be set to a valid non-empty string for the row creation to succeed. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperASPathTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperASPathTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
TRE tRPAdminASPathRegEx	1.3.6.1.4.1.6527.3.1.2.17.2.2.1.1.3	TRegularExpression	read-create	The regular expression for the AS Path entry. This object must be set to a valid non-empty string for the row creation to succeed.
tRPAdminCommunityTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.2		not-accessible	A table of community entries.
tRPAdminCommunityEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.2.1		not-accessible	Information about a particular community name member. Entries are created by user. Entries are deleted by user.
TCO tRPAdminCommunityName	1.3.6.1.4.1.6527.3.1.2.17.2.2.2.1.1	TCommunityName	not-accessible	The name of the community used as an index for this table.
TCO tRPAdminCommunityMember	1.3.6.1.4.1.6527.3.1.2.17.2.2.2.1.2	TCommunityMember	not-accessible	The AS Number or Community ID of the community member. The community name and the member name uniquely identify a row in this table.
ROW tRPAdminCommunityRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.2.1.3	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), createAndGo(4) and destroy(6). To create a row, set this object to createAndGo. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperCommunityTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperCommunityTable.
tRPAdminDampingTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.3		not-accessible	A table of route damping control entries.
tRPAdminDampingEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.3.1		not-accessible	Information about a particular Damping entry. Entries are created by user. Entries are deleted by user.
TDA tRPAdminDampingName	1.3.6.1.4.1.6527.3.1.2.17.2.2.3.1.1	TDampingName	not-accessible	The name of the damping entry used to uniquely identify a row in this table.
ROW tRPAdminDampingRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.3.1.2	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperDampingTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperDampingTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
U32 tRPAdminDampingHalfLife	1.3.6.1.4.1.6527.3.1.2.17.2.2.3.1.3	Unsigned32	read-create	Specifies the half-life, in minutes, for a routes figure-of-merit after it has been dampened. If a route's half-life is set to 15 minutes and has a figure-of-merit of 1500, after 15 minutes, the route's figure-of-merit will have decayed to 750. Set to 0 to disable.
U32 tRPAdminDampingMaxSuppress	1.3.6.1.4.1.6527.3.1.2.17.2.2.3.1.4	Unsigned32	read-create	Specifies the maximum amount of time, in minutes, that a route can be suppressed for. Set to 0 to disable.
U32 tRPAdminDampingReuse	1.3.6.1.4.1.6527.3.1.2.17.2.2.3.1.5	Unsigned32	read-create	Specifies the reuse threshold. If a route's figure-of-merit falls below the reuse threshold, the route can be reused. Set to 0 to disable.
U32 tRPAdminDampingSuppress	1.3.6.1.4.1.6527.3.1.2.17.2.2.3.1.6	Unsigned32	read-create	Specifies the suppress threshold. If a route's figure-of-merit goes above the suppress threshold, the route should be suppressed. Set to 0 to disable.
tRPAdminPrefixListTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.4		not-accessible	A table of prefix lists.
tRPAdminPrefixListEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1		not-accessible	Information about a particular prefix list. Entries are created by user. Entries are deleted by user.
TPR tRPAdminPrefixListName	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1.1	TPrefixListName	not-accessible	The name of the prefix list entry.
IP tRPAdminPrefixListIpPrefix	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1.2	IpAddress	not-accessible	The IP prefix of the prefix list entry.
ADR tRPAdminPrefixListMask	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1.3	IpAddressPrefixLength	not-accessible	The IP mask length of the prefix list entry.
ROW tRPAdminPrefixListRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1.4	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPrefixListTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPrefixListTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
INT tRPAdminPrefixListType	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1.5	INTEGER	not-accessible	The type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPAdminPrefixListBeginLength and less than or equal to the length defined by tRPAdminPrefixListThroughLength in order for an entry to be considered a match.
ADR tRPAdminPrefixListThroughLength	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1.6	IpAddressPrefixLength	read-create	When tRPAdminPrefixListType set to through(3), the mask length to use. Must be larger than tRPAdminPrefixListMask.
ADR tRPAdminPrefixListBeginLength	1.3.6.1.4.1.6527.3.1.2.17.2.2.4.1.8	IpAddressPrefixLength	read-create	When tRPAdminPrefixListType set to range(4), the mask length to use as the lower limit for the mask range. Must be larger than tRPAdminPrefixListMask and less than tRPAdminPrefixListThroughLength.
tRPAdminPolicyStatementTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.5		not-accessible	Control table for policy-statements.
tRPAdminPolicyStatementEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.5.1		not-accessible	Information about a particular policy-statement. Entries are created by user. Entries are deleted by user.
TPO tRPAdminPolicyStatementName	1.3.6.1.4.1.6527.3.1.2.17.2.2.5.1.1	TPolicyStatementName	not-accessible	The name of this policy statement that uniquely identifies an entry in this table.
ROW tRPAdminPolicyStatementRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.5.1.2	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPolicyStatementTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPolicyStatementTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
TIT tRPAdminPolicyStatementDescription	1.3.6.1.4.1.6527.3.1.2.17.2.2.5.1.3	TItemDescription	read-create	Description for this policy statement.
TPO tRPAdminPolicyStatementDefaultAction	1.3.6.1.4.1.6527.3.1.2.17.2.2.5.1.4	TPolicyEntryAction	read-create	The default-action for the policy statement indicates what happens to the route if none of the policy statement entries match.
tRPAdminPSDefaultActionParamsTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.6		not-accessible	Default action parameters for a policy-statement.
tRPAdminPSDefaultActionParamsEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1		not-accessible	Default action information about a particular policy statement. When tRPAdminPolicyStatementDefaultAction for the policy statement is accept(1), and no poliy statement entry matches the route, the following default actions are applied to the route. When tRPAdminPolicyStatementDefaultAction is reject, these objects are ignored, and the route is dropped. Entries are created when a policy statement is created. Entries are deleted when a policy statement is destroyed.
TPO tRPAdminPSDefaultActionASPath	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.1	TPolicyEntryEdit	read-create	The AS Path rewrite information for the route.
TAS tRPAdminPSDefaultActionASPathName	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.2	TASPathName	read-create	The AS Path name to use for add, remove, or replace operation specified by tRPAdminPSDefaultActionASPath. Ignored when tRPAdminPSDefaultActionASPath is none(1).
TMN tRPAdminPSDefaultActionASPathPrependAS	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.3	TmnxBgpAutonomousSystem	read-create	AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPAdminPSDefaultActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPAdminPSDefaultActionASPathPnd.
INT tRPAdminPSDefaultActionASPathPrependCount	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.4	INTEGER	read-create	Number of times tRPAdminPSDefaultActionASPathPnd is prepended to the AS-Path attribute of the route. Set to zero to disable.
TPO tRPAdminPSDefaultActionCommunity1	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.5	TPolicyEntryEdit	read-create	How to apply tRPAdminPSDefaultActionCommunityName1 to the communities for the route. Set to none(1) to disable this feature.
TCO tRPAdminPSDefaultActionCommunityName1	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.6	TCommunityName	read-create	Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPAdminPSDefaultActionCommunity1 is none(1)
TPO tRPAdminPSDefaultActionCommunity2	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.7	TPolicyEntryEdit	read-create	How to apply tRPAdminPSDefaultActionCommunityName2 to the communities for the route. Set to none(1) to disable this feature.
TCO tRPAdminPSDefaultActionCommunityName2	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.8	TCommunityName	read-create	Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPAdminPSDefaultActionCommunity2 is none(1)
TPO tRPAdminPSDefaultActionOrigin	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.9	TPolicyEntryCriteriaOrigin	read-create	The value of tRPAdminPSDefaultActionOrigin specifies the origin of the route exported into BGP if it does not match an entry.
T/F tRPAdminPSDefaultActionLocalPreferenceSet	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.10	TruthValue	read-create	When set to true(1), use the value of tRPAdminPSDefaultActionLocalPreference for local preference.
TMN tRPAdminPSDefaultActionLocalPreference	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.11	TmnxBgpLocalPreference	read-create	Local preference to apply to the route. Set tRPAdminPSDefaultActionLocalPreferenceSet to false(2) to disable.
TPO tRPAdminPSDefaultActionMetric	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.12	TPolicyEntryEdit	read-create	Action for tRPAdminPSDefaultActionMetricValue.
U32 tRPAdminPSDefaultActionMetricValue	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.13	Unsigned32	read-create	Add, subtract, or set metric value. Ignored when tRPAdminPSDefaultActionMetric is none(1).
TMN tRPAdminPSDefaultActionPreference	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.15	TmnxBgpPreference	read-create	Preference to apply to the route.
TDA tRPAdminPSDefaultActionDamping	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.16	TDampingName	read-create	Damping to apply to route. Set to empty string to disable.
T/F tRPAdminPSDefaultActionNextHopSelf	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.17	TruthValue	read-create	The value of tRPAdminPSDefaultActionNextHopSelf specifies the next-hop-self on the route. Next-hop-self cannot be set to 'true' at the same time as setting next-hop object tRPAdminPSDefActInetNextHop to a valid IP address. Setting tRPAdminPSDefaultActionNextHopSelf to 'true' will reset tRPAdminPSDefActInetNextHop object to disable.
IP tRPAdminPSDefaultActionNextHop	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.18	IpAddress	read-create	Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'.
TPO tRPAdminPSDefaultActionTag	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.19	TPolicyActionTag	read-create	The value of tRPAdminPSDefaultActionTag specifies the tag for the route. A value of 0 for tRPAdminPSDefaultActionTag specifies that tagging is disabled.
TOS tRPAdminPSDefaultActionOspfType	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.20	TOspfRouteType	read-create	OSPF route type for the route.
IPt tRPAdminPSDefActInetNextHopType	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.21	InetAddressType	read-create	The value of tRPAdminPSDefActInetNextHopType specifies the type of tRPAdminPSDefActInetNextHop address, as defined in the InetAddress MIB.
IP tRPAdminPSDefActInetNextHop	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.22	InetAddress	read-create	The value of tRPAdminPSDefActInetNextHop specifies the next-hop IP address in the route. To disable, tRPAdminPSDefActInetNextHopType should be set to 'ipv6' and tRPAdminPSDefActInetNextHop should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of tRPAdminPSDefActInetNextHopType object. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self object 'tRPAdminPSDefaultActionNextHopSelf' to 'true'. Setting next-hop to a valid IP address will reset tRPAdminPSDefaultActionNextHopSelf to 'false'. tRPAdminPSDefActInetNextHop object replaces tRPAdminPSDefaultActionNextHop that supports only IPv4 address style next-hop.
INE tRPAdminPSDefaultActionASPathPnd	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.23	InetAutonomousSystemNumber	read-create	The value of tRPAdminPSDefaultActionASPathPnd specifies the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPAdminPSDefaultActionASPathPrependCount is zero.
TMN tRPAdminPSDefActMcRedirSvcId	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.30	TmnxServId	read-create	The value of tRPAdminPSDefActMcRedirSvcId specifies the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
NUM tRPAdminPSDefActMcRedirIfIndex	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.31	InterfaceIndexOrZero	read-create	The value of tRPAdminPSDefActMcRedirIfIndex specifies the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
TPO tRPAdminPSDefActionMetricSource	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.32	TPolicyActionMetricSource	read-create	The value of tRPAdminPSDefActionMetricSource specifies the source of the default action metric. When the value of tRPAdminPSDefActionMetricSource is set to 'igpCost(1)', the value of tRPAdminPSDefaultActionMetricValue is ignored and the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route. The default value of tRPAdminPSDefActionMetricSource is 'metricVal(2)' which means the metric value is the value of tRPAdminPSDefaultActionMetricValue.
TPO tRPAdminPSDefActionAigpMetric	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.33	TPolicyEntryAigpMetricEdit	read-create	The value of tRPAdminPSDefActionAigpMetric specifies the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. The value of tRPAdminPSDefActionAigpMetric decides how to apply tRPAdminPSDefActnAigpMetricVal to the route. When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActnAigpMetricVal is ignored.
U32 tRPAdminPSDefActnAigpMetricVal	1.3.6.1.4.1.6527.3.1.2.17.2.2.6.1.34	Unsigned32	read-create	The value of tRPAdminPSDefActnAigpMetricVal specifies the value to add or set for the route AIGP(Accumulated IGP) metric. When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActnAigpMetricVal is ignored.
tRPAdminPSParamsTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.7		not-accessible	A table of policy statement entries.
tRPAdminPSParamsEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.7.1		not-accessible	Information about a particular policy statement entry. Entries are created by user. Entries are deleted by user.
TPO tRPAdminPSNameEntryIndex	1.3.6.1.4.1.6527.3.1.2.17.2.2.7.1.1	TPolicyStatementEntryID	not-accessible	The ID of this policy statement entry.
ROW tRPAdminPSParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.7.1.2	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSParamsTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSParamsTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
TIT tRPAdminPSParamsDescription	1.3.6.1.4.1.6527.3.1.2.17.2.2.7.1.3	TItemDescription	read-create	Description for this policy statement entry.
TPO tRPAdminPSParamsAction	1.3.6.1.4.1.6527.3.1.2.17.2.2.7.1.4	TPolicyEntryAction	read-create	The action to take when a route matches this policy statement entry's to or from criteria.
tRPAdminPSAcceptActionParamsTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.8		not-accessible	Accept-action parameters for a policy-statement.
tRPAdminPSAcceptActionParamsEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1		not-accessible	Accept-action information for a particular policy-statement entry. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed.
TPO tRPAdminPSAcceptActionASPath	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.1	TPolicyEntryEdit	read-create	The AS Path rewrite information for the route.
TAS tRPAdminPSAcceptActionASPathName	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.2	TASPathName	read-create	AS Path Name to add, remove, or replace. Ignored when tRPAdminPSAcceptActionASPath is none(1)
TMN tRPAdminPSAcceptActionASPathPrependAS	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.3	TmnxBgpAutonomousSystem	read-create	AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPAdminPSAcceptActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPAdminPSAcceptActionASPathPend.
INT tRPAdminPSAcceptActionASPathPrependCount	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.4	INTEGER	read-create	Number of times to prepend tRPAdminPSAcceptActionASPathPend to the route. Set to zero to disable this feature.
TPO tRPAdminPSAcceptActionCommunity1	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.5	TPolicyEntryEdit	read-create	How to apply tRPAdminPSAcceptActionCommunityName1 to the route.
TCO tRPAdminPSAcceptActionCommunityName1	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.6	TCommunityName	read-create	Community to apply to the route. Ignored when tRPAdminPSAcceptActionCommunity1 is set to none(1).
TPO tRPAdminPSAcceptActionCommunity2	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.7	TPolicyEntryEdit	read-create	How to apply tRPAdminPSAcceptActionCommunityName2 to the route.
TCO tRPAdminPSAcceptActionCommunityName2	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.8	TCommunityName	read-create	Community to apply to the route. Ignored when tRPAdminPSAcceptActionCommunity2 is set to none(1).
TPO tRPAdminPSAcceptActionOrigin	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.9	TPolicyEntryCriteriaOrigin	read-create	The value of tRPAdminPSAcceptActionOrigin specifies the origin of the route exported into BGP if it matches an entry.
T/F tRPAdminPSAcceptActionLocalPreferenceSet	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.10	TruthValue	read-create	When set to true(1), use tRPAdminPSAcceptActionLocalPreference for the local preference for the route.
TMN tRPAdminPSAcceptActionLocalPreference	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.11	TmnxBgpLocalPreference	read-create	Local preference for the route. Ignored when tRPAdminPSAcceptActionLocalPreferenceSet is false(2).
TPO tRPAdminPSAcceptActionMetric	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.12	TPolicyEntryEdit	read-create	How to apply tRPAdminPSAcceptActionMetricValue to the route.
U32 tRPAdminPSAcceptActionMetricValue	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.13	Unsigned32	read-create	Value to add, subtract, or set for the route metric. Ignored when tRPAdminPSAcceptActionMetric is none(1).
TMN tRPAdminPSAcceptActionPreference	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.15	TmnxBgpPreference	read-create	Preference to set in route.
TDA tRPAdminPSAcceptActionDamping	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.16	TDampingName	read-create	Damping to apply to route. Set to empty string to disable.
T/F tRPAdminPSAcceptActionNextHopSelf	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.17	TruthValue	read-create	The value of tRPAdminPSAcceptActionNextHopSelf specifies the next-hop-self on the route. Next-hop-self cannot be set to 'true' at the same time as setting next-hop object tRPAdminPSAcptActInetNextHop to a valid IP address. Setting tRPAdminPSAcceptActionNextHopSelf to 'true' will reset tRPAdminPSAcptActInetNextHop object to disable.
IP tRPAdminPSAcceptActionNextHop	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.18	IpAddress	read-create	Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'.
TPO tRPAdminPSAcceptActionTag	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.19	TPolicyActionTag	read-create	The value of tRPAdminPSAcceptActionTag specifies the tag for the route. A value of 0 for tRPAdminPSAcceptActionTag when specifies that tagging is disabled.
TOS tRPAdminPSAcceptActionOspfType	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.20	TOspfRouteType	read-create	OSPF route type to set in route.
IPt tRPAdminPSAcptActInetNextHopType	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.21	InetAddressType	read-create	The value of tRPAdminPSAcptActInetNextHopType specifies the type of tRPAdminPSAcptActInetNextHop address, as defined in the InetAddress MIB.
IP tRPAdminPSAcptActInetNextHop	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.22	InetAddress	read-create	The value of tRPAdminPSAcptActInetNextHop specifies the next-hop IP address in the route. To disable, tRPAdminPSAcptActInetNextHopType should be set to 'ipv6' and tRPAdminPSAcptActInetNextHop should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of the tRPAdminPSAcptActInetNextHopType object. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self object 'tRPAdminPSAcceptActionNextHopSelf' to 'true'. Setting next-hop to a valid IP address will reset tRPAdminPSAcceptActionNextHopSelf to 'false'. tRPAdminPSAcptActInetNextHop object replaces tRPAdminPSAcceptActionNextHop that supports only IPv4 address style next-hop.
INE tRPAdminPSAcceptActionASPathPend	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.23	InetAutonomousSystemNumber	read-create	The value of tRPAdminPSAcceptActionASPathPend specifies the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPAdminPSAcceptActionASPathPrependCount is zero.
TNA tRPAdminPSAcceptActionFC	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.24	TNamedItemOrEmpty	read-create	The value of tRPAdminPSAcceptActionFC specifies the forwarding class associated with the routes matched by this route policy entry. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when tRPAdminPSParamsAction is set either to 'reject' or 'none'.
TPR tRPAdminPSAcceptActionFCPriority	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.25	TPriorityOrUndefined	read-create	The value of tRPAdminPSAcceptActionFCPriority specifies the priority to be assigned to the routes matched by this route policy entry. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when tRPAdminPSParamsAction is set either to 'reject' or 'none'.
TMN tRPAdminPSAcptActMcRedirSvcId	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.30	TmnxServId	read-create	The value of tRPAdminPSAcptActMcRedirSvcId specifies the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
NUM tRPAdminPSAcptActMcRedirIfIndex	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.31	InterfaceIndexOrZero	read-create	The value of tRPAdminPSAcptActMcRedirIfIndex specifies the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured.
TPO tRPAdminPSAcptActnMetricSource	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.32	TPolicyActionMetricSource	read-create	The value of tRPAdminPSAcptActnMetricSource specifies the source of the accept action metric. When the value of tRPAdminPSAcptActnMetricSource is set to 'igpCost(1)' the value of tRPAdminPSAcceptActionMetricValue is ignored and the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route. The default value of tRPAdminPSAcptActnMetricSource is 'metricVal(2)' which means the metric value is the value of tRPAdminPSDefaultActionMetricValue.
TPO tRPAdminPSAcptActionAigpMetric	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.33	TPolicyEntryAigpMetricEdit	read-create	The value of tRPAdminPSAcptActionAigpMetric specifies the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. The value of tRPAdminPSAcptActionAigpMetric decides how to apply tRPAdminPSAcptActnAigpMetricVal to the route. When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActnAigpMetricVal is ignored.
U32 tRPAdminPSAcptActnAigpMetricVal	1.3.6.1.4.1.6527.3.1.2.17.2.2.8.1.34	Unsigned32	read-create	The value of tRPAdminPSAcptActnAigpMetricVal specifies the value to add or set for the route AIGP(Accumulated IGP) metric. When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActnAigpMetricVal is ignored.
tRPAdminPSToCriteriaTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.9		not-accessible	A table of policy statement entry 'to' criteria
tRPAdminPSToCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1		not-accessible	Information about policy statement entry -to- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed.
TPO tRPAdminPSToCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.1	TPolicyStatementEntryID	not-accessible	The policy statement entry ID
ROW tRPAdminPSToCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.2	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSToCriteriaTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSToCriteriaTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
TRO tRPAdminPSToCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.3	TRoutePolicyProtocol	read-create	The protocol name to match on. Set to none(1) to disable.
IP tRPAdminPSToCriteriaNeighborIpAddr	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.4	IpAddress	read-create	The IP address of neighbor to match on. Set to 0.0.0.0 to disable.
TPR tRPAdminPSToCriteriaNeighborPrefixList	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.5	TPrefixListName	read-create	The name of a neighbor prefix list to match on. Set to empty string to disable.
TIS tRPAdminPSToCriteriaIsisLevel	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.7	TIsisLevel	read-create	The value for tRPAdminPSToCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured.
TPR tRPAdminPSToCriteriaPrefixList1	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.8	TPrefixListName	read-create	The value of tRPAdminPSToCriteriaPrefixList1 specifies the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPAdminPSToCriteriaPrefixList2	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.9	TPrefixListName	read-create	The value of tRPAdminPSToCriteriaPrefixList2 specifies the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPAdminPSToCriteriaPrefixList3	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.10	TPrefixListName	read-create	The value of tRPAdminPSToCriteriaPrefixList3 specifies the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPAdminPSToCriteriaPrefixList4	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.11	TPrefixListName	read-create	The value of tRPAdminPSToCriteriaPrefixList4 specifies the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
TPR tRPAdminPSToCriteriaPrefixList5	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.12	TPrefixListName	read-create	The value of tRPAdminPSToCriteriaPrefixList5 specifies the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria.
IPt tRPAdminPSToCritNbrInetAddrType	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.13	InetAddressType	read-create	The value of tRPAdminPSToCritNbrInetAddrType specifies the type of tRPAdminPSToCritNbrInetAddr address, as defined in the InetAddress MIB.
IP tRPAdminPSToCritNbrInetAddr	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.14	InetAddress	read-create	The value of tRPAdminPSToCritNbrInetAddr specifies the IP address of neighbor to match on. To disable, tRPAdminPSToCritNbrInetAddrType should be set to 'ipv6' and tRPAdminPSToCritNbrInetAddr should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of the tRPAdminPSToCritNbrInetAddrType object. tRPAdminPSToCritNbrInetAddr object replaces tRPAdminPSToCriteriaNeighborIpAddr that supports only IPv4 address style neighbor.
U32 tRPAdminPSToCriteriaInstanceId	1.3.6.1.4.1.6527.3.1.2.17.2.2.9.1.15	Unsigned32	read-create	The value of tRPAdminPSToCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPAdminPSToCriteriaInstanceId is set to 4294967295, all instances of OSPF protocol are leaked into BGP.
tRPAdminPSFromCriteriaTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.10		not-accessible	A table of from filter criteria for each policy-statement entry.
tRPAdminPSFromCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1		not-accessible	Information about policy statement entry -from- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed.
TPO tRPAdminPSFromCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.1	TPolicyStatementEntryID	not-accessible	The policy statement entry ID
ROW tRPAdminPSFromCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.2	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSFromCriteriaTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSFromCriteriaTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
TRO tRPAdminPSFromCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.3	TRoutePolicyProtocol	read-create	The protocol name to match on. Set to none(1) to disable.
IP tRPAdminPSFromCriteriaNeighborIpAddr	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.4	IpAddress	read-create	The IP address of neighbor to match on. Set to 0.0.0.0 to disable.
TPR tRPAdminPSFromCriteriaNeighborPrefixList	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.5	TPrefixListName	read-create	The name of a neighbor prefix list to match on. Set to empty string to disable.
TPR tRPAdminPSFromCriteriaPrefixList1	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.6	TPrefixListName	read-create	The name of the first prefix list to match on. Set to empty string to disable.
TPR tRPAdminPSFromCriteriaPrefixList2	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.7	TPrefixListName	read-create	The name of the second prefix list to match on. Set to empty string to disable.
TPR tRPAdminPSFromCriteriaPrefixList3	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.8	TPrefixListName	read-create	The name of the third prefix list to match on. Set to empty string to disable.
TPR tRPAdminPSFromCriteriaPrefixList4	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.9	TPrefixListName	read-create	The name of the fourth prefix list to match on. Set to empty string to disable.
TPR tRPAdminPSFromCriteriaPrefixList5	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.10	TPrefixListName	read-create	The name of the fifth prefix list to match on. Set to empty string to disable.
TAS tRPAdminPSFromCriteriaASPath	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.11	TASPathName	read-create	The name of the AS Path to match on. Set to empty string to disable.
TCO tRPAdminPSFromCriteriaCommunity	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.12	TCommunityName	read-create	The name of the community to match on. Set to empty string to disable.
TPO tRPAdminPSFromCriteriaOrigin	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.13	TPolicyEntryCriteriaOrigin	read-create	The value of tRPAdminPSFromCriteriaOrigin specifies the route match criterion for an entry.
TOS tRPAdminPSFromCriteriaOspfRouteType	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.14	TOspfRouteType	read-create	The OSPF route type to match on. Set to zero to disable.
IP tRPAdminPSFromCriteriaArea	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.16	IpAddress	read-create	Used when redistributing OSPF routes into other protocols. Specifies the OSPF area that must be matched in filtered routes.
T/F tRPAdminPSFromCriteriaAreaConfigured	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.17	TruthValue	read-create	Specifies if the tRPAdminPSFromCriteriaArea has been configured
TIS tRPAdminPSFromCriteriaIsisLevel	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.18	TIsisLevel	read-create	The value for tRPAdminPSFromCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured.
T/F tRPAdminPSFromCriteriaIsisExternal	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.19	TruthValue	read-create	When tRPAdminPSFromCriteriaIsisExternal is 'true', match only External IS-IS routes. If 'false', match all routes. External IS-IS routes are those routes that have been learned from outside the IS-IS domain.
TPR tRPAdminPSFromCriteriaIgmpHostPrefixList	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.20	TPrefixListName	read-create	tRPAdminPSFromCriteriaIgmpHostPrefixList contains the name of the prefix list that is used to match the IGMP host IP address. This object is set to empty string to disable.
TPR tRPAdminPSFromCriteriaGrpAddrPrefixList	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.21	TPrefixListName	read-create	tRPAdminPSFromCriteriaGrpAddrPrefixList contains the name of the prefix list that is used to match the multicast group address. This object is set to empty string to disable.
IP tRPAdminPSFromCriteriaSrcAddr	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.22	IpAddress	read-create	tRPAdminPSFromCriteriaSrcAddr contains the IP address of the source to match on. It is used by multicast protocols like IGMP and PIM. This object is set to 0.0.0.0 to disable.
TNA tRPAdminPSFromCriteriaInterface	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.23	TNamedItemOrEmpty	read-create	tRPAdminPSFromCriteriaInterface contains the name of the interface to match on. PIM Bootstrap route policy will use this object to accept/reject bootstrap messages coming on the interface specified by this object. This object is set to empty string to disable.
TPO tRPAdminPSFromCriteriaTag	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.24	TPolicyActionTag	read-create	The value of tRPAdminPSFromCriteriaTag specifies the route tag to match on. Routes will only be matched on this value when tRPAdminPSFromCriteriaMatchTag is enabled. A value of 0 for tRPAdminPSFromCriteriaTag when tRPAdminPSFromCriteriaMatchTag is enabled would match untagged routes.
IPt tRPAdminPSFromCritNbrInetAddrType	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.25	InetAddressType	read-create	The value of tRPAdminPSFromCritNbrInetAddrType specifies the type of tRPAdminPSFromCritNbrInetAddr address, as defined in the InetAddress MIB.
IP tRPAdminPSFromCritNbrInetAddr	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.26	InetAddress	read-create	The value of tRPAdminPSFromCritNbrInetAddr specifies the IP address of neighbor to match on. To disable, tRPAdminPSFromCritNbrInetAddrType should be set to 'ipv6' and tRPAdminPSFromCritNbrInetAddr should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of the tRPAdminPSFromCritNbrInetAddrType object. tRPAdminPSFromCritNbrInetAddr object replaces tRPAdminPSFromCriteriaNeighborIpAddr that supports only IPv4 address style neighbor.
IPt tRPAdminPSFromCritSrcInetAddrType	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.27	InetAddressType	read-create	The value of tRPAdminPSFromCritSrcInetAddrType specifies the type of tRPAdminPSFromCritSrcInetAddr address, as defined in the InetAddress MIB.
IP tRPAdminPSFromCritSrcInetAddr	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.28	InetAddress	read-create	The value of tRPAdminPSFromCritSrcInetAddr specifies the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP. To disable, tRPAdminPSFromCritSrcInetAddrType should be set to 'ipv4' and tRPAdminPSFromCritSrcInetAddr should be set to 255.255.255.255. The type of this address is determined by the value of the tRPAdminPSFromCritSrcInetAddrType object. tRPAdminPSFromCritSrcInetAddr object replaces tRPAdminPSFromCriteriaSrcAddr that supports only IPv4 address style source.
TMN tRPAdminPSFromCriteriaFamily	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.29	TmnxBGPFamilyType	read-create	The bits set in the value of tRPAdminPSFromCriteriaFamily specifies the address families that this condition would match against.
U32 tRPAdminPSFromCriteriaInstanceId	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.30	Unsigned32	read-create	The value of tRPAdminPSFromCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPAdminPSToCriteriaInstanceId is set to 4294967295, all instances of OSPF protocol are leaked into BGP.
TMN tRPAdminPSFromCriteriaMatchTag	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.31	TmnxEnabledDisabled	read-create	The value of tRPAdminPSFromCriteriaMatchTag specifies if tag matching is enabled or disabled. Disabling of this object will set tRPAdminPSFromCriteriaTag to zero.
TPO tRPAdminPSFromCriteriaState	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.32	TPolicyEntryCriteriaState	read-create	The value of tRPAdminPSFromCriteriaState specifies the route state match criterion for this entry.
TNA tRPAdminPSFromCritASPathGroup	1.3.6.1.4.1.6527.3.1.2.17.2.2.10.1.33	TNamedItemOrEmpty	read-create	The value of tRPAdminPSFromCritASPathGroup specifies the AS-Path Group match criterion for this entry.
tRPAdminInetPrefixListTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.11		not-accessible	The table of IPv4 and IPv6 admin prefix lists.
tRPAdminInetPrefixListEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1		not-accessible	Each row entry in the tRPAdminInetPrefixListEntry represents information about a particular prefix list. Entries are created by user. Entries are deleted by user.
TPR tRPAdminInetPrefixListName	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.1	TPrefixListName	not-accessible	The value of tRPAdminInetPrefixListName indicates the name of the prefix list entry.
IPt tRPAdminInetPrefixListPrefixType	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.2	InetAddressType	not-accessible	The value of tRPAdminInetPrefixListPrefixType indicates the address type of tRPAdminInetPrefixListPrefix.
IP tRPAdminInetPrefixListPrefix	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.3	InetAddress	not-accessible	The value of tRPAdminInetPrefixListPrefix indicates the IP prefix of the prefix list entry.
ADR tRPAdminInetPrefixListPrefixLen	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.4	InetAddressPrefixLength	not-accessible	The value of tRPAdminInetPrefixListPrefixLen indicates the IP prefix length of the prefix list entry.
INT tRPAdminInetPrefixListType	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.5	INTEGER	not-accessible	The value of tRPAdminInetPrefixListType indicates the type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPAdminInetPrefixListBeginLen and less than or equal to the length defined by tRPAdminInetPrefixListThroughLen in order for an entry to be considered a match.
ROW tRPAdminInetPrefixListRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.6	RowStatus	read-create	RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperInetPrefixListTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperInetPrefixListTable. If there are objects that refer to the entry, the destroy SET request will fail with an error.
ADR tRPAdminInetPrefixListThroughLen	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.7	InetAddressPrefixLength	read-create	The value of tRPAdminInetPrefixListThroughLen specifies the prefix length to use when tRPAdminPrefixListType set to through(3). The value must be larger than tRPAdminInetPrefixListPrefixLen.
ADR tRPAdminInetPrefixListBeginLen	1.3.6.1.4.1.6527.3.1.2.17.2.2.11.1.8	InetAddressPrefixLength	read-create	The value of tRPAdminInetPrefixListBeginLen specifies the prefix length to use as the lower limit for the prefix range when tRPAdminInetPrefixListType set to range(4). The value must be larger than tRPAdminInetPrefixListPrefixLen and less than tRPAdminInetPrefixListThroughLen.
tRPAdminCommunityExprTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.12		not-accessible	A table of community entries.
tRPAdminCommunityExprEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.12.1		not-accessible	Information about a particular community name member. Entries are created by user. Entries are deleted by user.
TCO tRPAdminCommunityExprName	1.3.6.1.4.1.6527.3.1.2.17.2.2.12.1.1	TCommunityName	not-accessible	The value of tRPAdminCommunityExprName indicates the name of the community used as an index for this table.
ROW tRPAdminCommunityExprRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.12.1.2	RowStatus	read-create	The value of tRPAdminCommunityExprRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. The value of tRPAdminCommunityExprString1 must be set to a non-empty string in the same SNMP SET PDU for the row creation to succeed. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperCommunityExprTable. When the value of this object is set to 'createAndWait(5)', a new entry is created with value of this object set to 'notInService(2)' and the tRPAdminCommunityExprString1-4 strings can be configured separately. When the value of this object is set to 'active(1)', the values of objects tRPAdminCommunityExprString1-4, are concatenated to form one expression of at most 900 characters. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperCommunityExprTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperCommunityExprTable.
TCO tRPAdminCommunityExprString1	1.3.6.1.4.1.6527.3.1.2.17.2.2.12.1.3	TCommunityExpression	read-create	The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty.
TCO tRPAdminCommunityExprString2	1.3.6.1.4.1.6527.3.1.2.17.2.2.12.1.4	TCommunityExpression	read-create	The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty.
TCO tRPAdminCommunityExprString3	1.3.6.1.4.1.6527.3.1.2.17.2.2.12.1.5	TCommunityExpression	read-create	The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty.
TCO tRPAdminCommunityExprString4	1.3.6.1.4.1.6527.3.1.2.17.2.2.12.1.6	TCommunityExpression	read-create	The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty.
tRPAdminASPathGroupTable	1.3.6.1.4.1.6527.3.1.2.17.2.2.13		not-accessible	The table of AS-Path Groups.
tRPAdminASPathGroupEntry	1.3.6.1.4.1.6527.3.1.2.17.2.2.13.1		not-accessible	Each row entry in the tRPAdminASPathGroupTable represents information about a particular AS-Path Group.
TNA tRPAdminASPathGroupName	1.3.6.1.4.1.6527.3.1.2.17.2.2.13.1.1	TNamedItem	not-accessible	The value of tRPAdminASPathGroupName specifies the name of the AS-Path Group.
U32 tRPAdminASPathGroupEntryIndex	1.3.6.1.4.1.6527.3.1.2.17.2.2.13.1.2	Unsigned32	not-accessible	The value of tRPAdminASPathGroupEntryIndex specifies the index of the entry in the AS-Path Group.
ROW tRPAdminASPathGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.17.2.2.13.1.3	RowStatus	read-create	The value of tRPAdminASPathGroupRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperASPathGroupTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperASPathGroupTable.
TAS tRPAdminASPathGroupASPathName	1.3.6.1.4.1.6527.3.1.2.17.2.2.13.1.4	TASPathName	read-create	The value of tRPAdminASPathGroupASPathName specifies the name of the AS-Path from the tRPAdminASPathTable.
tRoutePolicyNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.17
tRoutePolicyNotifications	1.3.6.1.4.1.6527.3.1.3.17.0

RFC description

Manages route policies and BGP route filtering on Alcatel-Lucent SROS equipment.

Start monitoring Nokia/Alcatel-Lucent 7750 SR / 7450 ESS routers (AS-path/community-list route-policy config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-ROUTE-POLICY-MIB

What Is TIMETRA-ROUTE-POLICY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description