-- TIMETRA ROUTE POLICY Management Information Base TIMETRA-ROUTE-POLICY-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION, TimeInterval, TimeStamp FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressType, InetAddressPrefixLength, InetAutonomousSystemNumber FROM INET-ADDRESS-MIB timetraSRMIBModules, tmnxSRObjs, tmnxSRNotifyPrefix, tmnxSRConfs FROM TIMETRA-GLOBAL-MIB IpAddressPrefixLength, TNamedItem, TNamedItemOrEmpty, TItemDescription, TmnxBgpAutonomousSystem, TmnxBgpLocalPreference, TmnxBgpPreference, TmnxBGPFamilyType, TmnxEnabledDisabled, TmnxServId, TFCNameOrEmpty, TPriority, TPriorityOrUndefined FROM TIMETRA-TC-MIB ; timetraRoutePolicyMIBModule MODULE-IDENTITY LAST-UPDATED "201202281200Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Alcatel-Lucent SROS Support Web: http://support.alcatel-lucent.com" DESCRIPTION "This is the SNMP MIB module to manage and provision route policys on Alcatel-Lucent SROS equipment. Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "1202281200Z" DESCRIPTION "Rev 10.0 28 Feb 2012 12:00 10.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "1102010000Z" DESCRIPTION "Rev 9.0 1 Feb 2011 00:00 9.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "0902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "0801010000Z" DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 6.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "0603230000Z" DESCRIPTION "Rev 4.0 23 Mar 2006 00:00 4.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "0501240000Z" DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 2.1 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "0401150000Z" DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 2.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "0308150000Z" DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 1.2 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200301200000Z" DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 1.0 Release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200104300000Z" DESCRIPTION "Rev 0.1 30 Apr 2001 00:00 Initial version of the TIMETRA-ROUTE-POLICY-MIB." ::= { timetraSRMIBModules 17 } tRoutePolicyObjects OBJECT IDENTIFIER ::= { tmnxSRObjs 17 } tRoutePolicyNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 17 } tRoutePolicyNotifications OBJECT IDENTIFIER ::= { tRoutePolicyNotifyPrefix 0 } tmnxRoutePolicyConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 17 } tRPOperObjects OBJECT IDENTIFIER ::= { tRoutePolicyObjects 1 } tRPAdminObjects OBJECT IDENTIFIER ::= { tRoutePolicyObjects 2 } -- -- textual conventions -- TASPathName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of an AS path. An empty string indicates that no AS Path has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TCommunityName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a community. An empty string indicates that no community has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TCommunityMember ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The member of a community. Can be one of the following: 1) [1..65535]:[0..65535] 2) An extended community in one of the following formats - target:[0..65535]:[0..4294967295] - origin:[0..65535]:[0..4294967295] - target::[0..65535] - origin::[0..65535] - target:[4-byte AS number]:[0..65535] - origin:[4-byte AS number]:[0..65535] 4-byte AS number - [0..4294967295] - target:& - target:& 3) A regular expression 4) A well known community i.e. one of the following keywords - no-advertise - no-export - no-export-subconfed - null." SYNTAX DisplayString (SIZE(1..72)) TCommunityExpression ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TCommunityExpression specifies a logical expression containing terms and operators. It can contain sub-expressions enclosed by round brackets. Terms, operators and brackets are separated by a space character. A term is a string of type TCommunityMember. An operator can be the string 'AND', 'OR', and 'NOT'." SYNTAX DisplayString TDampingName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a route damping policy. An empty string indicates that no damping policy has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TPrefixListName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a prefix list. An empty string indicates that no prefix list has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TPolicyStatementName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a policy statement when used as an index to a table." SYNTAX TNamedItem TRegularExpression ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A regular expression string. The Regular expression string matches against 1) an AS_PATH string e.g. '100 200 300', 2) a community string e.g. '100:200' where 100 is the as-number, and 200 is the community-value. The regular expression is expressed in terms of a TERM, and an OPERATOR: A term is either: 1) an AS Number 2) a community value e.g. in 100:200, we have three tokens: (i) 100 is the as-number, (ii) ':' is the separator token, and (iii) 200 is the community-value 3) '.' - DOT is a wild-card token which matches with either an AS Number or a Community. The list of operators are: 1) '|' - suggests an alternation. 2) '*' - multiple occurrences of the token. 3) '?' - 0 or 1 occurrence of token. 4) '+' - 1 or more occurrences of token. 5) '(' - is used to parenthesize so that a regular expression is considered as one token. 6) ')' - closes the parenthesis. 7) '[' - used to demarcate range. 8) ']' - closes the box bracket. 9) '{m, [n]}' - suggest that the term can occur anywhere between m, and n times. 10) '^' - matches the beginning of the string - only allowed for communities. 11) '$' - matches the end of the string - only allowed for communities. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. The EBNF description for the regular expression string are: 1) reg_ex ::= empty_string | non-empty_reg_ex 2) non-empty_reg_ex ::= bounded_element | ( bounded_element '|' non-empty_reg_ex ) 3) bounded_element ::= ['^'] element ['$'] 4) element ::= ( '(' list ')' | atomic ) ['*' | '?' | '+' | '{' integer ',' [ integer ] '}' ] [element] 5) list ::= element | (element '|' list) 6) atomic ::= '.' | ':' | '<' | '>' | atom_list 7) atom_list ::= atom | ( '[' atom_list_boxed ) 8) atom_list_boxed ::= ( atom ']' ) | ( atom atom_list_boxed ) 9) (for as-path reg-ex) atom ::= integer [ '-' integer ] an atom is essentially EQUIVALENT to a TERM (for community reg-ex) atom ::= digit[ '-' digit ] NOTE -> atom_list_boxed is a list of integers ending in box bracket - BNF description is error-free." SYNTAX DisplayString TPolicyStatementEntryID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identification number for a policy statement entry. Entries are sorted by ID number. Matching entries are evaluated in order from lowest ID to highest ID. We suggest ordering policy statement entry IDs by 10s: 10, 20, 30, etc., so entry insertions are easy." SYNTAX Unsigned32 TRoutePolicyProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A list of routing protocols, for -to and -from policies." SYNTAX INTEGER { none(1), direct(2), static(3), bgp(4), isis(5), ospf(6), rip(7), aggregate(8), bgpVpn(9), igmp(10), pim(11), ospf3(12), ldp(13), subscriber(14), mld(15), managed(16), msdp(17), vpnLeak(18), mobileHost(19), tms(20), nat(21), periodic(22), ipsec(23) } TOspfRouteType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The OSPF route type. Set to zero to disable." SYNTAX INTEGER ( 0 | 1 | 2 ) TIsisLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the ISIS Route Level match criterion. A value of 0 indicates no IS-IS route match criterion is configured. There are two types of areas in IS-IS, namely Level 1 areas and Level 2 areas. Routers within a Level 1 area route to other routers in that area. If the destination does not exist within the area, the Level 1 router will route toward a Level 2 router. Level 2 routers route between areas and toward other ASs." SYNTAX INTEGER ( 0 | 1 | 2 ) TPolicyEntryAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Action to take when route matches the entry's match criteria. accept(1) - perform the accept-action modifications, advertise the route, do not evaluate any more policy entries. reject(2) - do not advertise the route, do not evaluate any more policy entries. continue(3) - perform the accept-action modifications, evaluate the next policy entry in the policy statement. nextPolicy(4) - perform the accept-action modifications, evaluate the next policy statement." SYNTAX INTEGER { none(0), accept(1), reject(2), continue(3), nextPolicy(4) } TPolicyEntryEdit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Editing action to take when route matches the entry's match criteria. none(1) - do not change the value in the route add(2) - add the corresponding objects to the route remove(3) - remove the corresponding objects to the route replace(4) - replace the value in the route with the corresponding object." SYNTAX INTEGER { none(1), add(2), remove(3), replace(4) } TPolicyEntryCriteriaOrigin ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Origin of the route. none(1) - ignore this criteria igp(2) - learned from an Interior Gateway Protocol (OSPF, ISIS, etc.) egp(3) - learned from an Exterior Gateway Protocol (BGP) incomplete(4) - Route origin is unknown (usually due to aggregation) any(5) - to or from either igp or egp aaa(6) - subscriber host address originated from aaa dhcp(7) - subscriber host address originated from dhcp ludb(8) - subscriber host address originated from local user database." SYNTAX INTEGER { none(1), igp(2), egp(3), incomplete(4), any(5), aaa(6), dhcp(7), ludb(8) } TPolicyActionTag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Tag value to set. Zero means disabled, no tag value will be set." SYNTAX Unsigned32 (0..4294967295) TPolicyEntryCriteriaState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Generic criteria state. none(1) - ignore this criteria srrpMaster(2) - srrp-master srrpNonMaster(3) - srrp-non-master ipsecMaster (6), - Routes that are in ipsec-master with peer state ipsecMasterNoPeer (7), - Routes that are ipsec-master-without-peer ipsecNonMaster (8) - Routes that are in ipsec-non-master state." SYNTAX INTEGER { none(1), srrpMaster(2), srrpNonMaster(3), ipsecMaster (6), ipsecMasterNoPeer (7), ipsecNonMaster (8) } TPolicyActionMetricSource ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The source of the Action Metric." SYNTAX INTEGER { igpCost(1), metricVal(2) } TPolicyEntryAigpMetricEdit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Editing action to take when route matches the entry's match criteria. none(1) - do not change the value in the route. add(2) - add the corresponding object value to the aigp value in the received route. replace(3) - replace the aigp value in the route with the corresponding object value. useIgp(4) - replace the aigp value in the route with the IGP cost." SYNTAX INTEGER { none (1), add (2), replace(3), useIgp (4) } -- -- mib objects -- -- -- the requirements for this MIB are: -- o allow user to add and remove route policies -- o allow user to see the values used by route policies -- o allow user to add, remove, and change any number of -- values used by route policies, at the same time. -- -- this MIB is split in to three sections: -- o the route policy object operational objects -- o the route policy object administrative objects -- o the objects to control transactions (begin/commit/abort) -- applying administrative add/remove/change objects to the -- operational objects. -- -- for each route policy configuration area, -- there are two MIB tables. the operational tables -- (tRPOperXXXXTable) can only be read, to show the -- running configuration of the route policies. -- -- the administrative tables (tRPOperXXXXTable) can be -- read to show what the new object values will be at -- the next commit. the administrative tables can -- be written to control add, change, and remove of -- operational table entries. -- -- when new entries are created, the table entries will -- exist in the administrative tables, but those table -- entries will not be created in -- the operational tables until committed. -- -- -- the administrative tables are intended to support -- changes from one user at a time. Use tRPAdminSpinLock -- to serialize access to the administrative tables -- from separate users and management stations. -- -- -- when a policy statement is created (tRPAdminPolicyStatementTable), -- a corresponding entry in tRPAdminPSDefaultActionParamsTable is -- also created. -- -- when a policy statement entry is created (tRPAdminPSParamsTable), -- corresponding entries in tRPAdminPSAcceptActionParamsTable, -- tRPAdminPSToCriteriaTable, and tRPAdminPSFromCriteriaTable are -- also created. -- -- similarly for deletion: when the policy statement entry is destroyed, -- corresponding entries in tRPAdminPSAcceptActionParamsTable, -- tRPAdminPSToCriteriaTable, and tRPAdminPSFromCriteriaTable are -- also destroyed. -- -- when the policy statement is destroyed, corresponding entries -- in tRPAdminPSDefaultActionTable, tRPAdminPSParamsTable -- and tRPAdminPSAcceptActionParamsTable, -- tRPAdminPSToCriteriaTable, and tRPAdminPSFromCriteriaTable are -- also destroyed. -- -- -- -- Operational value objects -- tRPOperValueObjects OBJECT IDENTIFIER ::= { tRPOperObjects 1 } -- -- route policy Operational value tables -- -- -- AS Path -- tRPOperASPathTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperASPathTable. tRPOperASPathTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 1 } tRPOperASPathTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of AS Path names and corresponding regular-expressions." ::= { tRPOperValueObjects 2 } tRPOperASPathEntry OBJECT-TYPE SYNTAX TRPOperASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular AS Path Name. Entries are created by user, via tRPAdminASPathTable. Entries are deleted by user, via tRPAdminASPathTable. tRPAdminASPathTable entry must exist before referencing objects {tRPOperPSDefaultActionASPathName, tRPOperPSAcceptActionASPathName, tRPOperPSToCriteriaASPathName, tRPOperPSFromCriteriaASPath} can be set to refer to the tRPOperASPathName." INDEX { tRPOperASPathName } ::= { tRPOperASPathTable 1 } TRPOperASPathEntry ::= SEQUENCE { tRPOperASPathName TASPathName, tRPOperASPathRowStatus RowStatus, tRPOperASPathRegEx TRegularExpression, tRPOperASPathEntryLastChanged TimeStamp } tRPOperASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the AS Path entry used to uniquely identify an AS Path." ::= { tRPOperASPathEntry 1 } tRPOperASPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminASPathTable." ::= { tRPOperASPathEntry 2 } tRPOperASPathRegEx OBJECT-TYPE SYNTAX TRegularExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The regular expression for the AS Path entry." ::= { tRPOperASPathEntry 3 } tRPOperASPathEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperASPathEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperASPathEntry 4 } -- -- community members -- tRPOperCommunityTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperCommunityTable. tRPOperCommunityTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 3 } tRPOperCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPOperValueObjects 4 } tRPOperCommunityEntry OBJECT-TYPE SYNTAX TRPOperCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community member. Entries are created by user, via tRPAdminCommunityTable. Entries are deleted by user, via tRPAdminCommunityTable. There must be one entry for , or the does not exist and can not be referenced {tRPAdminPSDefaultActionCommunityName, tRPAdminPSAcceptActionCommunityName, tRPAdminPSToCriteriaCommunity tRPAdminPSFromCriteriaCommunity}." INDEX { tRPOperCommunityName, tRPOperCommunityMember } ::= { tRPOperCommunityTable 1 } TRPOperCommunityEntry ::= SEQUENCE { tRPOperCommunityName TCommunityName, tRPOperCommunityMember TCommunityMember, tRPOperCommunityRowStatus RowStatus, tRPOperCommunityEntryLastChanged TimeStamp } tRPOperCommunityName OBJECT-TYPE SYNTAX TCommunityName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the community used as an index for this table." ::= { tRPOperCommunityEntry 1 } tRPOperCommunityMember OBJECT-TYPE SYNTAX TCommunityMember MAX-ACCESS not-accessible STATUS current DESCRIPTION "The AS Number or Community ID of the community member. The community name and the member name uniquely identify a row in this table." ::= { tRPOperCommunityEntry 2 } tRPOperCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminCommunityTable." ::= { tRPOperCommunityEntry 3 } tRPOperCommunityEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperCommunityEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperCommunityEntry 4 } -- -- damping -- tRPOperDampingTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperDampingTable. tRPOperDampingTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 5 } tRPOperDampingTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of route damping control entries." ::= { tRPOperValueObjects 6 } tRPOperDampingEntry OBJECT-TYPE SYNTAX TRPOperDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Damping entry. Entries are created by user, via tRPAdminDampingTable. Entries are deleted by user, via tRPAdminDampingTable. The entry for a damping name must exist before referring objects (tRPAdminPSDefaultActionDamping, tRPAdminPSAcceptActionDamping) can be set to that name." INDEX { tRPOperDampingName } ::= { tRPOperDampingTable 1 } TRPOperDampingEntry ::= SEQUENCE { tRPOperDampingName TDampingName, tRPOperDampingRowStatus RowStatus, tRPOperDampingHalfLife Unsigned32, tRPOperDampingMaxSuppress Unsigned32, tRPOperDampingReuse Unsigned32, tRPOperDampingSuppress Unsigned32, tRPOperDampingEntryLastChanged TimeStamp } tRPOperDampingName OBJECT-TYPE SYNTAX TDampingName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the damping entry used to uniquely identify a row in this table." ::= { tRPOperDampingEntry 1 } tRPOperDampingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminDampingTable." ::= { tRPOperDampingEntry 2 } tRPOperDampingHalfLife OBJECT-TYPE SYNTAX Unsigned32 (0..45) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the half-life, in minutes, for a routes figure-of-merit after it has been dampened. If a route's half-life is set to 15 minutes and has a figure-of-merit of 1500, after 15 minutes, the route's figure-of-merit will have decayed to 750. Set to 0 to disable." ::= { tRPOperDampingEntry 3 } tRPOperDampingMaxSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..720) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum amount of time, in minutes, that a route can be suppressed for. Set to 0 to disable." ::= { tRPOperDampingEntry 4 } tRPOperDampingReuse OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the reuse threshold. If a route's figure-of-merit falls below the reuse threshold, the route can be reused. Set to 0 to disable." ::= { tRPOperDampingEntry 5 } tRPOperDampingSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the suppress threshold. If a route's figure-of-merit goes above the suppress threshold, the route should be suppressed. Set to 0 to disable." ::= { tRPOperDampingEntry 6 } tRPOperDampingEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperDampingEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperDampingEntry 7 } -- -- prefix-list -- tRPOperPrefixListTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPrefixListTable. tRPOperPrefixListTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 7 } tRPOperPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix lists." ::= { tRPOperValueObjects 8 } tRPOperPrefixListEntry OBJECT-TYPE SYNTAX TRPOperPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular prefix list. Entries are created by user via tRPAdminPrefixListTable. Entries are deleted by user via tRPAdminPrefixListTable. A prefix list name entry must exist before referring objects (tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSToCriteriaPrefixList1 - 5 tRPAdminPSFromCriteriaPrefixList1 - 5) can be set to that name." INDEX { tRPOperPrefixListName, tRPOperPrefixListIpPrefix, tRPOperPrefixListMask, tRPOperPrefixListType } ::= { tRPOperPrefixListTable 1 } TRPOperPrefixListEntry ::= SEQUENCE { tRPOperPrefixListName TPrefixListName, tRPOperPrefixListIpPrefix IpAddress, tRPOperPrefixListMask IpAddressPrefixLength, tRPOperPrefixListRowStatus RowStatus, tRPOperPrefixListType INTEGER, tRPOperPrefixListThroughLength IpAddressPrefixLength, tRPOperPrefixListEntryLastChanged TimeStamp, tRPOperPrefixListBeginLength IpAddressPrefixLength } tRPOperPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the prefix list entry." ::= { tRPOperPrefixListEntry 1 } tRPOperPrefixListIpPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP prefix of the prefix list entry." ::= { tRPOperPrefixListEntry 2 } tRPOperPrefixListMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP mask length of the prefix list entry." ::= { tRPOperPrefixListEntry 3 } tRPOperPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPrefixListTable." ::= { tRPOperPrefixListEntry 4 } tRPOperPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact(1), longer(2), through(3), range(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPOperPrefixListBeginLength and less than or equal to the length defined by tRPOperPrefixListThroughLength in order for an entry to be considered a match." ::= { tRPOperPrefixListEntry 5 } tRPOperPrefixListThroughLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "When tRPOperPrefixListType set to through(3), the mask length to use. Must be larger than tRPOperPrefixListMask." ::= { tRPOperPrefixListEntry 6 } tRPOperPrefixListEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPrefixListEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPrefixListEntry 7 } tRPOperPrefixListBeginLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "When tRPOperPrefixListType set to range(4), the mask length to use as the lower limit for the mask range. Must be larger than tRPOperPrefixListMask and less than tRPOperPrefixListThroughLength." ::= { tRPOperPrefixListEntry 8 } -- -- policy-statement -- tRPOperPolicyStatementTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPolicyStatementTable. tRPOperPolicyStatementTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 9 } tRPOperPolicyStatementTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Control table for policy-statements." ::= { tRPOperValueObjects 10 } tRPOperPolicyStatementEntry OBJECT-TYPE SYNTAX TRPOperPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy-statement. Entries are created by user via tRPAdminPolicyStatementTable. Entries are deleted by user via tRPAdminPolicyStatementTable." INDEX { tRPOperPolicyStatementName } ::= { tRPOperPolicyStatementTable 1 } TRPOperPolicyStatementEntry ::= SEQUENCE { tRPOperPolicyStatementName TPolicyStatementName, tRPOperPolicyStatementRowStatus RowStatus, tRPOperPolicyStatementDescription TItemDescription, tRPOperPolicyStatementDefaultAction TPolicyEntryAction, tRPOperPolicyStatementEntryLastChanged TimeStamp } tRPOperPolicyStatementName OBJECT-TYPE SYNTAX TPolicyStatementName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of this policy statement that uniquely identifies an entry in this table." ::= { tRPOperPolicyStatementEntry 1 } tRPOperPolicyStatementRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPolicyStatementTable." ::= { tRPOperPolicyStatementEntry 2 } tRPOperPolicyStatementDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this policy statement." ::= { tRPOperPolicyStatementEntry 3 } tRPOperPolicyStatementDefaultAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-only STATUS current DESCRIPTION "The default-action for the policy statement indicates what happens to the route if none of the policy statement entries match." ::= { tRPOperPolicyStatementEntry 4 } tRPOperPolicyStatementEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPolicyStatementEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPolicyStatementEntry 5 } -- -- policy-statement default action -- tRPOperPSDefaultActionParamsTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSDefaultActionParamsTable. tRPOperPSDefaultActionParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 11 } tRPOperPSDefaultActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action parameters for a policy-statement." ::= { tRPOperValueObjects 12 } tRPOperPSDefaultActionParamsEntry OBJECT-TYPE SYNTAX TRPOperPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These parameters are applied when the default action for the policy statement is 'accept' (tRPOperPolicyStatementDefaultAction == accept(1)). These parameters are ignored when default action for the policy statement is 'reject' (tRPOperPolicyStatementDefaultAction == reject(2)). Entries are created when a policy statement is created. Entries are deleted when a policy statement is destroyed." INDEX { tRPOperPolicyStatementName } ::= { tRPOperPSDefaultActionParamsTable 1 } TRPOperPSDefaultActionParamsEntry ::= SEQUENCE { tRPOperPSDefaultActionASPath TPolicyEntryEdit, tRPOperPSDefaultActionASPathName TASPathName, tRPOperPSDefaultActionASPathPrependAS TmnxBgpAutonomousSystem, tRPOperPSDefaultActionASPathPrependCount INTEGER, tRPOperPSDefaultActionCommunity1 TPolicyEntryEdit, tRPOperPSDefaultActionCommunityName1 TCommunityName, tRPOperPSDefaultActionCommunity2 TPolicyEntryEdit, tRPOperPSDefaultActionCommunityName2 TCommunityName, tRPOperPSDefaultActionOrigin TPolicyEntryCriteriaOrigin, tRPOperPSDefaultActionLocalPreferenceSet TruthValue, tRPOperPSDefaultActionLocalPreference TmnxBgpLocalPreference, tRPOperPSDefaultActionMetric TPolicyEntryEdit, tRPOperPSDefaultActionMetricValue Unsigned32, tRPOperPSDefaultActionPreference TmnxBgpPreference, tRPOperPSDefaultActionDamping TDampingName, tRPOperPSDefaultActionNextHopSelf TruthValue, tRPOperPSDefaultActionNextHop IpAddress, tRPOperPSDefaultActionTag TPolicyActionTag, tRPOperPSDefaultActionOspfType TOspfRouteType, tRPOperPSDefaultActionParamsEntryLastChanged TimeStamp, tRPOperPSDefActInetNextHopType InetAddressType, tRPOperPSDefActInetNextHop InetAddress, tRPOperPSDefaultActionASPathPend InetAutonomousSystemNumber, tRPOperPSDefActMcRedirSvcId TmnxServId, tRPOperPSDefActMcRedirIfIndex InterfaceIndexOrZero, tRPOperPSDefActionMetricSource TPolicyActionMetricSource, tRPOperPSDefActionAigpMetric TPolicyEntryAigpMetricEdit, tRPOperPSDefActnAigpMetricVal Unsigned32 } tRPOperPSDefaultActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The AS Path rewrite information for the route." ::= { tRPOperPSDefaultActionParamsEntry 1 } tRPOperPSDefaultActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-only STATUS current DESCRIPTION "The AS Path name to use for add, remove, or replace operation specified by tRPOperPSDefaultActionASPath. Ignored when tRPOperPSDefaultActionASPath is none(1)." ::= { tRPOperPSDefaultActionParamsEntry 2 } tRPOperPSDefaultActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-only STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPOperPSDefaultActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPOperPSDefaultActionASPathPend." ::= { tRPOperPSDefaultActionParamsEntry 3 } tRPOperPSDefaultActionASPathPrependCount OBJECT-TYPE SYNTAX INTEGER (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times tRPOperPSDefaultActionASPathPend is prepended to the AS-Path attribute of the route. Set to zero to disable." ::= { tRPOperPSDefaultActionParamsEntry 4 } tRPOperPSDefaultActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "How to apply tRPOperPSDefaultActionCommunityName1 to the communities for the route. Set to none(1) to disable this feature." ::= { tRPOperPSDefaultActionParamsEntry 5 } tRPOperPSDefaultActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPOperPSDefaultActionCommunity1 is none(1)" ::= { tRPOperPSDefaultActionParamsEntry 6 } tRPOperPSDefaultActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "How to apply tRPOperPSDefaultActionCommunityName2 to the communities for the route. Set to none(1) to disable this feature." ::= { tRPOperPSDefaultActionParamsEntry 7 } tRPOperPSDefaultActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPOperPSDefaultActionCommunity2 is none(1)" ::= { tRPOperPSDefaultActionParamsEntry 8 } tRPOperPSDefaultActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionOrigin indicates the origin of the route exported into BGP if it does not match an entry." ::= { tRPOperPSDefaultActionParamsEntry 9 } tRPOperPSDefaultActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When set to true(1), use the value of tRPOperPSDefaultActionLocalPreference for local preference." ::= { tRPOperPSDefaultActionParamsEntry 10 } tRPOperPSDefaultActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Local preference to apply to the route. Set tRPOperPSDefaultActionLocalPreferenceSet to false(2) to disable." ::= { tRPOperPSDefaultActionParamsEntry 11 } tRPOperPSDefaultActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "Action for tRPOperPSDefaultActionMetricValue." ::= { tRPOperPSDefaultActionParamsEntry 12 } tRPOperPSDefaultActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Add, subtract, or set metric value. Ignored when tRPOperPSDefaultActionMetric is none(1)." ::= { tRPOperPSDefaultActionParamsEntry 13 } tRPOperPSDefaultActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Preference to apply to the route." ::= { tRPOperPSDefaultActionParamsEntry 15 } tRPOperPSDefaultActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-only STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." ::= { tRPOperPSDefaultActionParamsEntry 16 } tRPOperPSDefaultActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionNextHopSelf indicates the next-hop-self on the route. Next-hop-self cannot be 'true' when the next-hop object 'tRPOperPSDefActInetNextHop' has a valid IP address. If tRPOperPSDefaultActionNextHopSelf has a value of 'true' then tRPOperPSDefActInetNextHop object is disabled." ::= { tRPOperPSDefaultActionParamsEntry 17 } tRPOperPSDefaultActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'." ::= { tRPOperPSDefaultActionParamsEntry 18 } tRPOperPSDefaultActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionTag indicates the operational tag for the route. A value of 0 for tRPAdminPSDefaultActionTag indicates that tagging is disabled." ::= { tRPOperPSDefaultActionParamsEntry 19 } tRPOperPSDefaultActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF route type for the route." ::= { tRPOperPSDefaultActionParamsEntry 20 } tRPOperPSDefaultActionParamsEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSDefaultActionParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSDefaultActionParamsEntry 21 } tRPOperPSDefActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActInetNextHopType indicates the type of tRPOperPSDefActInetNextHop address, as defined in the InetAddress MIB." ::= { tRPOperPSDefaultActionParamsEntry 22 } tRPOperPSDefActInetNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActInetNextHop indicates the next-hop IP address in the route. The object tRPOperPSDefActInetNextHop is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSDefActInetNextHopType object. Next-hop cannot be a valid IP address when next-hop-self object 'tRPOperPSDefaultActionNextHopSelf' is set to 'true'. If next-hop is a valid IP address then tRPOperPSDefaultActionNextHopSelf is set to 'false'. tRPOperPSDefActInetNextHop object replaces tRPOperPSDefaultActionNextHop that supports only IPv4 address style next-hop." ::= { tRPOperPSDefaultActionParamsEntry 23 } tRPOperPSDefaultActionASPathPend OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionASPathPend indicates the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPOperPSDefaultActionASPathPrependCount is zero." ::= { tRPOperPSDefaultActionParamsEntry 24 } tRPOperPSDefActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActMcRedirSvcId indicates the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." ::= { tRPOperPSDefaultActionParamsEntry 30 } tRPOperPSDefActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActMcRedirIfIndex indicates the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." ::= { tRPOperPSDefaultActionParamsEntry 31 } tRPOperPSDefActionMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionMetricSource indicates the source of the default action metric. The value 'igpCost(1)' means that the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route and the value of the object tRPOperPSDefaultActionMetricValue is ignored. The value 'metricVal(2)' means the metric value is the value of tRPOperPSDefaultActionMetricValue." ::= { tRPOperPSDefaultActionParamsEntry 32 } tRPOperPSDefActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAigpMetric indicates the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActnAigpMetricVal is ignored." ::= { tRPOperPSDefaultActionParamsEntry 33 } tRPOperPSDefActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActnAigpMetricVal indicates the value to be added or set for the route AIGP(Accumulated IGP) metric. When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActnAigpMetricVal is ignored." ::= { tRPOperPSDefaultActionParamsEntry 34 } -- -- policy-statement entry params -- tRPOperPSParamsTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSParamsTable. tRPOperPSParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 13 } tRPOperPSParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entries." ::= { tRPOperValueObjects 14 } tRPOperPSParamsEntry OBJECT-TYPE SYNTAX TRPOperPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy statement entry. Entries are created when a policy statement parameters entry is created. Entries are deleted when a policy statement parameters entry is destroyed." INDEX { tRPOperPolicyStatementName, tRPOperPSNameEntryIndex } ::= { tRPOperPSParamsTable 1 } TRPOperPSParamsEntry ::= SEQUENCE { tRPOperPSNameEntryIndex TPolicyStatementEntryID, tRPOperPSParamsRowStatus RowStatus, tRPOperPSParamsDescription TItemDescription, tRPOperPSParamsAction TPolicyEntryAction, tRPOperPSParamsEntryLastChanged TimeStamp } tRPOperPSNameEntryIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifier for this policy statement entry." ::= { tRPOperPSParamsEntry 1 } tRPOperPSParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPSParamsTable." ::= { tRPOperPSParamsEntry 2 } tRPOperPSParamsDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this policy statement entry." ::= { tRPOperPSParamsEntry 3 } tRPOperPSParamsAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-only STATUS current DESCRIPTION "The action to take when a route matches this policy statement entry's to or from criteria." ::= { tRPOperPSParamsEntry 4 } tRPOperPSParamsEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSParamsEntry 5 } -- -- policy-statement default action -- tRPOperPSAcceptActionParamsTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSAcceptActionParamsTable. tRPOperPSAcceptActionParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 15 } tRPOperPSAcceptActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action parameters for a policy-statement." ::= { tRPOperValueObjects 16 } tRPOperPSAcceptActionParamsEntry OBJECT-TYPE SYNTAX TRPOperPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information for a policy-statement entry. If the policy statement entry action is 'reject' then all of these objects are ignored. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed. To Create or destroy entries in this table, use the policy statement entry administrative table (tRPAdminPSParamsTable)." INDEX { tRPOperPolicyStatementName, tRPOperPSNameEntryIndex } ::= { tRPOperPSAcceptActionParamsTable 1 } TRPOperPSAcceptActionParamsEntry ::= SEQUENCE { tRPOperPSAcceptActionASPath TPolicyEntryEdit, tRPOperPSAcceptActionASPathName TASPathName, tRPOperPSAcceptActionASPathPrependAS TmnxBgpAutonomousSystem, tRPOperPSAcceptActionASPathPrependCount INTEGER, tRPOperPSAcceptActionCommunity1 TPolicyEntryEdit, tRPOperPSAcceptActionCommunityName1 TCommunityName, tRPOperPSAcceptActionCommunity2 TPolicyEntryEdit, tRPOperPSAcceptActionCommunityName2 TCommunityName, tRPOperPSAcceptActionOrigin TPolicyEntryCriteriaOrigin, tRPOperPSAcceptActionLocalPreferenceSet TruthValue, tRPOperPSAcceptActionLocalPreference TmnxBgpLocalPreference, tRPOperPSAcceptActionMetric TPolicyEntryEdit, tRPOperPSAcceptActionMetricValue Unsigned32, tRPOperPSAcceptActionPreference TmnxBgpPreference, tRPOperPSAcceptActionDamping TDampingName, tRPOperPSAcceptActionNextHopSelf TruthValue, tRPOperPSAcceptActionNextHop IpAddress, tRPOperPSAcceptActionTag TPolicyActionTag, tRPOperPSAcceptActionOspfType TOspfRouteType, tRPOperPSAcceptActionParamsEntryLastChanged TimeStamp, tRPOperPSAcptActInetNextHopType InetAddressType, tRPOperPSAcptActInetNextHop InetAddress, tRPOperPSAcceptActionASPathPend InetAutonomousSystemNumber, tRPOperPSAcptActMcRedirSvcId TmnxServId, tRPOperPSAcptActMcRedirIfIndex InterfaceIndexOrZero, tRPOperPSAcptActnMetricSource TPolicyActionMetricSource, tRPOperPSAcptActionAigpMetric TPolicyEntryAigpMetricEdit, tRPOperPSAcptActnAigpMetricVal Unsigned32 } tRPOperPSAcceptActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The AS Path rewrite information for the route." ::= { tRPOperPSAcceptActionParamsEntry 1 } tRPOperPSAcceptActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-only STATUS current DESCRIPTION "AS Path Name to add, remove, or replace. Ignored when tRPOperPSAcceptActionASPath is none(1)" ::= { tRPOperPSAcceptActionParamsEntry 2 } tRPOperPSAcceptActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-only STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPOperPSAcceptActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPOperPSAcceptActionASPathPend." ::= { tRPOperPSAcceptActionParamsEntry 3 } tRPOperPSAcceptActionASPathPrependCount OBJECT-TYPE SYNTAX INTEGER (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times to prepend tRPOperPSAcceptActionASPathPend to the route. Set to zero to disable this feature." ::= { tRPOperPSAcceptActionParamsEntry 4 } tRPOperPSAcceptActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "How to apply tRPOperPSAcceptActionCommunityName1 to the route." ::= { tRPOperPSAcceptActionParamsEntry 5 } tRPOperPSAcceptActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "Community to apply to the route. Ignored when tRPOperPSAcceptActionCommunity1 is set to none(1)." ::= { tRPOperPSAcceptActionParamsEntry 6 } tRPOperPSAcceptActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "How to apply tRPOperPSAcceptActionCommunityName2 to the route." ::= { tRPOperPSAcceptActionParamsEntry 7 } tRPOperPSAcceptActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "Community to apply to the route. Ignored when tRPOperPSAcceptActionCommunity2 is set to none(1)." ::= { tRPOperPSAcceptActionParamsEntry 8 } tRPOperPSAcceptActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionOrigin indicates the origin of the route exported into BGP if it matches an entry." ::= { tRPOperPSAcceptActionParamsEntry 9 } tRPOperPSAcceptActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When set to true(1), use tRPOperPSAcceptActionLocalPreference for the local preference for the route." ::= { tRPOperPSAcceptActionParamsEntry 10 } tRPOperPSAcceptActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Local preference for the route. Ignored when tRPOperPSAcceptActionLocalPreferenceSet is false(2)." ::= { tRPOperPSAcceptActionParamsEntry 11 } tRPOperPSAcceptActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "How to apply tRPOperPSAcceptActionMetricValue to the route." ::= { tRPOperPSAcceptActionParamsEntry 12 } tRPOperPSAcceptActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value to add, subtract, or set for the route metric. Ignored when tRPOperPSAcceptActionMetric is none(1)." ::= { tRPOperPSAcceptActionParamsEntry 13 } tRPOperPSAcceptActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Preference to set in route." ::= { tRPOperPSAcceptActionParamsEntry 15 } tRPOperPSAcceptActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-only STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." ::= { tRPOperPSAcceptActionParamsEntry 16 } tRPOperPSAcceptActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionNextHopSelf indicates the next-hop-self on the route. Next-hop-self cannot be 'true' when the next-hop object 'tRPOperPSAcptActInetNextHop' has a valid IP address. If tRPOperPSAcceptActionNextHopSelf has a value of 'true' then tRPOperPSAcptActInetNextHop object is disabled." ::= { tRPOperPSAcceptActionParamsEntry 17 } tRPOperPSAcceptActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'." ::= { tRPOperPSAcceptActionParamsEntry 18 } tRPOperPSAcceptActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionTag indicates the operational tag for the route. A value of 0 for tRPAdminPSAcceptActionTag indicates that tagging is disabled." ::= { tRPOperPSAcceptActionParamsEntry 19 } tRPOperPSAcceptActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF route type to set in route." ::= { tRPOperPSAcceptActionParamsEntry 20 } tRPOperPSAcceptActionParamsEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSAcceptActionParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSAcceptActionParamsEntry 21 } tRPOperPSAcptActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActInetNextHopType indicates the type of tRPOperPSAcptActInetNextHop address, as defined in the InetAddress MIB." ::= { tRPOperPSAcceptActionParamsEntry 22 } tRPOperPSAcptActInetNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActInetNextHop indicates the next-hop IP address in the route. Next-hop is disabled if the value of tRPOperPSAcptActInetNextHopType is 'ipv6' and the value of tRPOperPSAcptActInetNextHop is ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSAcptActInetNextHopType object. Next-hop cannot be a valid IP address when next-hop-self object 'tRPOperPSAcceptActionNextHopSelf' is set to 'true'. If next-hop is a valid IP address then tRPOperPSAcceptActionNextHopSelf is set to 'false'. tRPOperPSAcptActInetNextHop object replaces tRPOperPSAcceptActionNextHop that supports only IPv4 address style next-hop." ::= { tRPOperPSAcceptActionParamsEntry 23 } tRPOperPSAcceptActionASPathPend OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionASPathPend indicates the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPOperPSAcceptActionASPathPrependCount is zero." ::= { tRPOperPSAcceptActionParamsEntry 24 } tRPOperPSAcptActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActMcRedirSvcId indicates the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPOperPSAcceptActionParamsEntry 30 } tRPOperPSAcptActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActMcRedirIfIndex indicates the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPOperPSAcceptActionParamsEntry 31 } tRPOperPSAcptActnMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActnMetricSource indicates the source of the accept action metric. The value 'igpCost(1)' means that the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route and the value of the object tRPOperPSAcceptActionMetricValue is ignored. The value 'metricVal(2)' means the metric value is the value of tRPOperPSAcceptActionMetricValue." DEFVAL { metricVal } ::= { tRPOperPSAcceptActionParamsEntry 32 } tRPOperPSAcptActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActionAigpMetric indicates the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActnAigpMetricVal is ignored." ::= { tRPOperPSAcceptActionParamsEntry 33 } tRPOperPSAcptActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActnAigpMetricVal indicates the value to be added or set for the route AIGP(Accumulated IGP) metric. When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActnAigpMetricVal is ignored." ::= { tRPOperPSAcceptActionParamsEntry 34 } -- -- policy-statement entry to -- tRPOperPSToCriteriaTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSToCriteriaTable. tRPOperPSToCriteriaTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 17 } tRPOperPSToCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entry 'to' criteria" ::= { tRPOperValueObjects 18 } tRPOperPSToCriteriaEntry OBJECT-TYPE SYNTAX TRPOperPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a policy statement entry's -to- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPOperPolicyStatementName, tRPOperPSToCriteriaIndex } ::= { tRPOperPSToCriteriaTable 1 } TRPOperPSToCriteriaEntry ::= SEQUENCE { tRPOperPSToCriteriaIndex TPolicyStatementEntryID, tRPOperPSToCriteriaRowStatus RowStatus, tRPOperPSToCriteriaProtocol TRoutePolicyProtocol, tRPOperPSToCriteriaNeighborIpAddr IpAddress, tRPOperPSToCriteriaNeighborPrefixList TPrefixListName, tRPOperPSToCriteriaEntryLastChanged TimeStamp, tRPOperPSToCriteriaIsisLevel TIsisLevel, tRPOperPSToCriteriaPrefixList1 TPrefixListName, tRPOperPSToCriteriaPrefixList2 TPrefixListName, tRPOperPSToCriteriaPrefixList3 TPrefixListName, tRPOperPSToCriteriaPrefixList4 TPrefixListName, tRPOperPSToCriteriaPrefixList5 TPrefixListName, tRPOperPSToCritNbrInetAddrType InetAddressType, tRPOperPSToCritNbrInetAddr InetAddress, tRPOperPSToCriteriaInstanceId Unsigned32 } tRPOperPSToCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPOperPSToCriteriaEntry 1 } tRPOperPSToCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPSToCriteriaTable." ::= { tRPOperPSToCriteriaEntry 2 } tRPOperPSToCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol name to match on. Set to none(1) to disable." ::= { tRPOperPSToCriteriaEntry 3 } tRPOperPSToCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 0.0.0.0 to disable." ::= { tRPOperPSToCriteriaEntry 4 } tRPOperPSToCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." ::= { tRPOperPSToCriteriaEntry 5 } tRPOperPSToCriteriaEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSToCriteriaEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSToCriteriaEntry 6 } tRPOperPSToCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The value for tRPOperPSToCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." ::= { tRPOperPSToCriteriaEntry 7 } tRPOperPSToCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList1 specifies the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCriteriaEntry 8 } tRPOperPSToCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList2 specifies the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCriteriaEntry 9 } tRPOperPSToCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList3 specifies the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCriteriaEntry 10 } tRPOperPSToCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList4 specifies the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCriteriaEntry 11 } tRPOperPSToCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList5 specifies the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCriteriaEntry 12 } tRPOperPSToCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritNbrInetAddrType indicates the type of tRPOperPSToCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPOperPSToCriteriaEntry 13 } tRPOperPSToCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritNbrInetAddr indicates the IP address of neighbor to match on. The object tRPOperPSToCritNbrInetAddr is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSToCritNbrInetAddrType object. tRPOperPSToCritNbrInetAddr object replaces tRPOperPSToCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPOperPSToCriteriaEntry 14 } tRPOperPSToCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31| 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPOperPSToCriteriaInstanceId is 4294967295, all instances of OSPF protocol are leaked into BGP." ::= { tRPOperPSToCriteriaEntry 15 } -- -- policy-statement entry from -- tRPOperPSFromCriteriaTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSFromCriteriaTable. tRPOperPSFromCriteriaTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 19 } tRPOperPSFromCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of from filter criteria for each policy-statement entry." ::= { tRPOperValueObjects 20 } tRPOperPSFromCriteriaEntry OBJECT-TYPE SYNTAX TRPOperPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry -from- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPOperPolicyStatementName, tRPOperPSFromCriteriaIndex } ::= { tRPOperPSFromCriteriaTable 1 } TRPOperPSFromCriteriaEntry ::= SEQUENCE { tRPOperPSFromCriteriaIndex TPolicyStatementEntryID, tRPOperPSFromCriteriaRowStatus RowStatus, tRPOperPSFromCriteriaProtocol TRoutePolicyProtocol, tRPOperPSFromCriteriaNeighborIpAddr IpAddress, tRPOperPSFromCriteriaNeighborPrefixList TPrefixListName, tRPOperPSFromCriteriaPrefixList1 TPrefixListName, tRPOperPSFromCriteriaPrefixList2 TPrefixListName, tRPOperPSFromCriteriaPrefixList3 TPrefixListName, tRPOperPSFromCriteriaPrefixList4 TPrefixListName, tRPOperPSFromCriteriaPrefixList5 TPrefixListName, tRPOperPSFromCriteriaASPath TASPathName, tRPOperPSFromCriteriaCommunity TCommunityName, tRPOperPSFromCriteriaOrigin TPolicyEntryCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType TOspfRouteType, tRPOperPSFromCriteriaEntryLastChanged TimeStamp, tRPOperPSFromCriteriaArea IpAddress, tRPOperPSFromCriteriaAreaConfigured TruthValue, tRPOperPSFromCriteriaIsisLevel TIsisLevel, tRPOperPSFromCriteriaIsisExternal TruthValue, tRPOperPSFromCriteriaIgmpHostPrefixList TPrefixListName, tRPOperPSFromCriteriaGrpAddrPrefixList TPrefixListName, tRPOperPSFromCriteriaSrcAddr IpAddress, tRPOperPSFromCriteriaInterface TNamedItemOrEmpty, tRPOperPSFromCriteriaTag TPolicyActionTag, tRPOperPSFromCritNbrInetAddrType InetAddressType, tRPOperPSFromCritNbrInetAddr InetAddress, tRPOperPSFromCritSrcInetAddrType InetAddressType, tRPOperPSFromCritSrcInetAddr InetAddress, tRPOperPSFromCriteriaFamily TmnxBGPFamilyType, tRPOperPSFromCriteriaInstanceId Unsigned32, tRPOperPSFromCriteriaMatchTag TmnxEnabledDisabled, tRPOperPSFromCriteriaState TPolicyEntryCriteriaState, tRPOperPSFromCritASPathGroup TNamedItemOrEmpty } tRPOperPSFromCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPOperPSFromCriteriaEntry 1 } tRPOperPSFromCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminPSFromCriteriaTable." ::= { tRPOperPSFromCriteriaEntry 2 } tRPOperPSFromCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol name to match on. Set to none(1) to disable." ::= { tRPOperPSFromCriteriaEntry 3 } tRPOperPSFromCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 0.0.0.0 to disable." ::= { tRPOperPSFromCriteriaEntry 4 } tRPOperPSFromCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 5 } tRPOperPSFromCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the first prefix list to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 6 } tRPOperPSFromCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the second prefix list to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 7 } tRPOperPSFromCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the third prefix list to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 8 } tRPOperPSFromCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the fourth prefix list to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 9 } tRPOperPSFromCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the fifth prefix list to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 10 } tRPOperPSFromCriteriaASPath OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the AS Path to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 11 } tRPOperPSFromCriteriaCommunity OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the community to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 12 } tRPOperPSFromCriteriaOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaOrigin indicates the route match criterion for an entry." ::= { tRPOperPSFromCriteriaEntry 13 } tRPOperPSFromCriteriaOspfRouteType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF route type to match on. Set to zero to disable." ::= { tRPOperPSFromCriteriaEntry 14 } tRPOperPSFromCriteriaEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSFromCriteriaEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSFromCriteriaEntry 15 } tRPOperPSFromCriteriaArea OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Used when redistributing OSPF routes into other protocols. Specifies the OSPF area that must be matched in filtered routes." ::= { tRPOperPSFromCriteriaEntry 16 } tRPOperPSFromCriteriaAreaConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies if the tRPOperPSFromCriteriaArea has been configured" ::= { tRPOperPSFromCriteriaEntry 17 } tRPOperPSFromCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The value for tRPOperPSFromCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." ::= { tRPOperPSFromCriteriaEntry 18 } tRPOperPSFromCriteriaIsisExternal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When tRPOperPSFromCriteriaIsisExternal is 'true', match only External IS-IS routes. If 'false', match all routes. External IS-IS routes are those routes that have been learned from outside the IS-IS domain." ::= { tRPOperPSFromCriteriaEntry 19 } tRPOperPSFromCriteriaIgmpHostPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaIgmpHostPrefixList contains the name of the prefix list that is used to match the IGMP host IP address. The value of the object will be an empty string if it not set." ::= { tRPOperPSFromCriteriaEntry 20 } tRPOperPSFromCriteriaGrpAddrPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaGrpAddrPrefixList contains the name of the prefix list that is used to match the multicast group address. The value of the object will be an empty string if it not set." ::= { tRPOperPSFromCriteriaEntry 21 } tRPOperPSFromCriteriaSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaSrcAddr contains the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP. The value of this object will be 0.0.0.0 if it is not set." ::= { tRPOperPSFromCriteriaEntry 22 } tRPOperPSFromCriteriaInterface OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaInterface contains the name of the interface to match on. PIM Bootstrap route policy will use this object to accept/reject bootstrap messages coming on the interface specified by this object. The value of the object will be an empty string if it not set." ::= { tRPOperPSFromCriteriaEntry 23 } tRPOperPSFromCriteriaTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaTag indicates the operational tag to match on. It will only be valid when tRPOperPSFromCriteriaMatchTag is enabled which indicates that route matching based on tags is enabled. A value of 0 for tRPOperPSFromCriteriaTag when tRPOperPSFromCriteriaMatchTag is enabled indicates untagged routes are matched." ::= { tRPOperPSFromCriteriaEntry 24 } tRPOperPSFromCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritNbrInetAddrType indicates the type of tRPOperPSFromCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPOperPSFromCriteriaEntry 25 } tRPOperPSFromCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritNbrInetAddr indicates the IP address of neighbor to match on. The object tRPOperPSFromCritNbrInetAddr is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of the tRPOperPSFromCritNbrInetAddrType object. tRPOperPSFromCritNbrInetAddr object replaces tRPOperPSFromCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPOperPSFromCriteriaEntry 26 } tRPOperPSFromCritSrcInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritSrcInetAddrType indicates the type of tRPOperPSFromCritSrcInetAddr address, as defined in the InetAddress MIB." ::= { tRPOperPSFromCriteriaEntry 27 } tRPOperPSFromCritSrcInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritSrcInetAddr indicates the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP and is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of the tRPOperPSFromCritSrcInetAddrType object. tRPOperPSFromCritSrcInetAddr object replaces tRPOperPSFromCriteriaSrcAddr that supports only IPv4 address style source." ::= { tRPOperPSFromCriteriaEntry 28 } tRPOperPSFromCriteriaFamily OBJECT-TYPE SYNTAX TmnxBGPFamilyType MAX-ACCESS read-only STATUS current DESCRIPTION "The bits set in the value of tRPAdminPSFromCriteriaFamily indicate the address families that this condition would match against." ::= { tRPOperPSFromCriteriaEntry 29 } tRPOperPSFromCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31| 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPOperPSFromCriteriaInstanceId is 4294967295, all instances of OSPF protocol are leaked into BGP." ::= { tRPOperPSFromCriteriaEntry 30 } tRPOperPSFromCriteriaMatchTag OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaMatchTag indicates if tag matching is enabled or disabled." ::= { tRPOperPSFromCriteriaEntry 31 } tRPOperPSFromCriteriaState OBJECT-TYPE SYNTAX TPolicyEntryCriteriaState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaState indicates the route state match criterion for this entry." ::= { tRPOperPSFromCriteriaEntry 32 } tRPOperPSFromCritASPathGroup OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritASPathGroup indicates the AS-Path Group match criterion for this entry." ::= { tRPOperPSFromCriteriaEntry 33 } -- -- Administrative value objects -- tRPAdminControlObjects OBJECT IDENTIFIER ::= { tRPAdminObjects 1 } tRPAdminValueObjects OBJECT IDENTIFIER ::= { tRPAdminObjects 2 } -- -- AS Path -- tRPAdminASPathTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of AS Path names and corresponding regular-expressions." ::= { tRPAdminValueObjects 1 } tRPAdminASPathEntry OBJECT-TYPE SYNTAX TRPAdminASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular AS Path Name. Entries are created by user. Entries are deleted by user. Entry must exist before referencing objects can be set to refer to the tRPAdminASPathName." INDEX { tRPAdminASPathName } ::= { tRPAdminASPathTable 1 } TRPAdminASPathEntry ::= SEQUENCE { tRPAdminASPathName TASPathName, tRPAdminASPathRowStatus RowStatus, tRPAdminASPathRegEx TRegularExpression } tRPAdminASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the AS Path entry used to uniquely identify an AS Path." ::= { tRPAdminASPathEntry 1 } tRPAdminASPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4) and destroy(6). To create a row, set this object to createAndGo(4). The value of tRPAdminASPathRegEx must also be set to a valid non-empty string for the row creation to succeed. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperASPathTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperASPathTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminASPathEntry 2 } tRPAdminASPathRegEx OBJECT-TYPE SYNTAX TRegularExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The regular expression for the AS Path entry. This object must be set to a valid non-empty string for the row creation to succeed." ::= { tRPAdminASPathEntry 3 } -- -- community -- tRPAdminCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPAdminValueObjects 2 } tRPAdminCommunityEntry OBJECT-TYPE SYNTAX TRPAdminCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community name member. Entries are created by user. Entries are deleted by user." INDEX { tRPAdminCommunityName, tRPAdminCommunityMember } ::= { tRPAdminCommunityTable 1 } TRPAdminCommunityEntry ::= SEQUENCE { tRPAdminCommunityName TCommunityName, tRPAdminCommunityMember TCommunityMember, tRPAdminCommunityRowStatus RowStatus } tRPAdminCommunityName OBJECT-TYPE SYNTAX TCommunityName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the community used as an index for this table." ::= { tRPAdminCommunityEntry 1 } tRPAdminCommunityMember OBJECT-TYPE SYNTAX TCommunityMember MAX-ACCESS not-accessible STATUS current DESCRIPTION "The AS Number or Community ID of the community member. The community name and the member name uniquely identify a row in this table." ::= { tRPAdminCommunityEntry 2 } tRPAdminCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), createAndGo(4) and destroy(6). To create a row, set this object to createAndGo. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperCommunityTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperCommunityTable." ::= { tRPAdminCommunityEntry 3 } -- -- damping -- tRPAdminDampingTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of route damping control entries." ::= { tRPAdminValueObjects 3 } tRPAdminDampingEntry OBJECT-TYPE SYNTAX TRPAdminDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Damping entry. Entries are created by user. Entries are deleted by user." INDEX { tRPAdminDampingName } ::= { tRPAdminDampingTable 1 } TRPAdminDampingEntry ::= SEQUENCE { tRPAdminDampingName TDampingName, tRPAdminDampingRowStatus RowStatus, tRPAdminDampingHalfLife Unsigned32, tRPAdminDampingMaxSuppress Unsigned32, tRPAdminDampingReuse Unsigned32, tRPAdminDampingSuppress Unsigned32 } tRPAdminDampingName OBJECT-TYPE SYNTAX TDampingName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the damping entry used to uniquely identify a row in this table." ::= { tRPAdminDampingEntry 1 } tRPAdminDampingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperDampingTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperDampingTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminDampingEntry 2 } tRPAdminDampingHalfLife OBJECT-TYPE SYNTAX Unsigned32 (0..45) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the half-life, in minutes, for a routes figure-of-merit after it has been dampened. If a route's half-life is set to 15 minutes and has a figure-of-merit of 1500, after 15 minutes, the route's figure-of-merit will have decayed to 750. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 3 } tRPAdminDampingMaxSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..720) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum amount of time, in minutes, that a route can be suppressed for. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 4 } tRPAdminDampingReuse OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the reuse threshold. If a route's figure-of-merit falls below the reuse threshold, the route can be reused. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 5 } tRPAdminDampingSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the suppress threshold. If a route's figure-of-merit goes above the suppress threshold, the route should be suppressed. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 6 } -- -- prefix-list -- tRPAdminPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix lists." ::= { tRPAdminValueObjects 4 } tRPAdminPrefixListEntry OBJECT-TYPE SYNTAX TRPAdminPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular prefix list. Entries are created by user. Entries are deleted by user." INDEX { tRPAdminPrefixListName, tRPAdminPrefixListIpPrefix, tRPAdminPrefixListMask, tRPAdminPrefixListType} ::= { tRPAdminPrefixListTable 1 } TRPAdminPrefixListEntry ::= SEQUENCE { tRPAdminPrefixListName TPrefixListName, tRPAdminPrefixListIpPrefix IpAddress, tRPAdminPrefixListMask IpAddressPrefixLength, tRPAdminPrefixListRowStatus RowStatus, tRPAdminPrefixListType INTEGER, tRPAdminPrefixListThroughLength IpAddressPrefixLength, tRPAdminPrefixListBeginLength IpAddressPrefixLength } tRPAdminPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the prefix list entry." ::= { tRPAdminPrefixListEntry 1 } tRPAdminPrefixListIpPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP prefix of the prefix list entry." ::= { tRPAdminPrefixListEntry 2 } tRPAdminPrefixListMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP mask length of the prefix list entry." ::= { tRPAdminPrefixListEntry 3 } tRPAdminPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPrefixListTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPrefixListTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminPrefixListEntry 4 } tRPAdminPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact(1), longer(2), through(3), range(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPAdminPrefixListBeginLength and less than or equal to the length defined by tRPAdminPrefixListThroughLength in order for an entry to be considered a match." ::= { tRPAdminPrefixListEntry 5 } tRPAdminPrefixListThroughLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "When tRPAdminPrefixListType set to through(3), the mask length to use. Must be larger than tRPAdminPrefixListMask." DEFVAL { 0 } ::= { tRPAdminPrefixListEntry 6 } tRPAdminPrefixListBeginLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "When tRPAdminPrefixListType set to range(4), the mask length to use as the lower limit for the mask range. Must be larger than tRPAdminPrefixListMask and less than tRPAdminPrefixListThroughLength." DEFVAL { 0 } ::= { tRPAdminPrefixListEntry 8 } -- -- policy-statement -- tRPAdminPolicyStatementTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Control table for policy-statements." ::= { tRPAdminValueObjects 5 } tRPAdminPolicyStatementEntry OBJECT-TYPE SYNTAX TRPAdminPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy-statement. Entries are created by user. Entries are deleted by user." INDEX { tRPAdminPolicyStatementName } ::= { tRPAdminPolicyStatementTable 1 } TRPAdminPolicyStatementEntry ::= SEQUENCE { tRPAdminPolicyStatementName TPolicyStatementName, tRPAdminPolicyStatementRowStatus RowStatus, tRPAdminPolicyStatementDescription TItemDescription, tRPAdminPolicyStatementDefaultAction TPolicyEntryAction } tRPAdminPolicyStatementName OBJECT-TYPE SYNTAX TPolicyStatementName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of this policy statement that uniquely identifies an entry in this table." ::= { tRPAdminPolicyStatementEntry 1 } tRPAdminPolicyStatementRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPolicyStatementTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPolicyStatementTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminPolicyStatementEntry 2 } tRPAdminPolicyStatementDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "Description for this policy statement." DEFVAL { ''H } ::= { tRPAdminPolicyStatementEntry 3 } tRPAdminPolicyStatementDefaultAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-create STATUS current DESCRIPTION "The default-action for the policy statement indicates what happens to the route if none of the policy statement entries match." DEFVAL { reject } ::= { tRPAdminPolicyStatementEntry 4 } -- -- policy-statement default action -- tRPAdminPSDefaultActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action parameters for a policy-statement." ::= { tRPAdminValueObjects 6 } tRPAdminPSDefaultActionParamsEntry OBJECT-TYPE SYNTAX TRPAdminPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. When tRPAdminPolicyStatementDefaultAction for the policy statement is accept(1), and no poliy statement entry matches the route, the following default actions are applied to the route. When tRPAdminPolicyStatementDefaultAction is reject, these objects are ignored, and the route is dropped. Entries are created when a policy statement is created. Entries are deleted when a policy statement is destroyed." INDEX { tRPAdminPolicyStatementName } ::= { tRPAdminPSDefaultActionParamsTable 1 } TRPAdminPSDefaultActionParamsEntry ::= SEQUENCE { tRPAdminPSDefaultActionASPath TPolicyEntryEdit, tRPAdminPSDefaultActionASPathName TASPathName, tRPAdminPSDefaultActionASPathPrependAS TmnxBgpAutonomousSystem, tRPAdminPSDefaultActionASPathPrependCount INTEGER, tRPAdminPSDefaultActionCommunity1 TPolicyEntryEdit, tRPAdminPSDefaultActionCommunityName1 TCommunityName, tRPAdminPSDefaultActionCommunity2 TPolicyEntryEdit, tRPAdminPSDefaultActionCommunityName2 TCommunityName, tRPAdminPSDefaultActionOrigin TPolicyEntryCriteriaOrigin, tRPAdminPSDefaultActionLocalPreferenceSet TruthValue, tRPAdminPSDefaultActionLocalPreference TmnxBgpLocalPreference, tRPAdminPSDefaultActionMetric TPolicyEntryEdit, tRPAdminPSDefaultActionMetricValue Unsigned32, tRPAdminPSDefaultActionPreference TmnxBgpPreference, tRPAdminPSDefaultActionDamping TDampingName, tRPAdminPSDefaultActionNextHopSelf TruthValue, tRPAdminPSDefaultActionNextHop IpAddress, tRPAdminPSDefaultActionTag TPolicyActionTag, tRPAdminPSDefaultActionOspfType TOspfRouteType, tRPAdminPSDefActInetNextHopType InetAddressType, tRPAdminPSDefActInetNextHop InetAddress, tRPAdminPSDefaultActionASPathPnd InetAutonomousSystemNumber, tRPAdminPSDefActMcRedirSvcId TmnxServId, tRPAdminPSDefActMcRedirIfIndex InterfaceIndexOrZero, tRPAdminPSDefActionMetricSource TPolicyActionMetricSource, tRPAdminPSDefActionAigpMetric TPolicyEntryAigpMetricEdit, tRPAdminPSDefActnAigpMetricVal Unsigned32 } tRPAdminPSDefaultActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The AS Path rewrite information for the route." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 1 } tRPAdminPSDefaultActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-create STATUS current DESCRIPTION "The AS Path name to use for add, remove, or replace operation specified by tRPAdminPSDefaultActionASPath. Ignored when tRPAdminPSDefaultActionASPath is none(1)." DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 2 } tRPAdminPSDefaultActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPAdminPSDefaultActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPAdminPSDefaultActionASPathPnd." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 3 } tRPAdminPSDefaultActionASPathPrependCount OBJECT-TYPE SYNTAX INTEGER (0..50) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of times tRPAdminPSDefaultActionASPathPnd is prepended to the AS-Path attribute of the route. Set to zero to disable." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 4 } tRPAdminPSDefaultActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "How to apply tRPAdminPSDefaultActionCommunityName1 to the communities for the route. Set to none(1) to disable this feature." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 5 } tRPAdminPSDefaultActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPAdminPSDefaultActionCommunity1 is none(1)" DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 6 } tRPAdminPSDefaultActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "How to apply tRPAdminPSDefaultActionCommunityName2 to the communities for the route. Set to none(1) to disable this feature." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 7 } tRPAdminPSDefaultActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPAdminPSDefaultActionCommunity2 is none(1)" DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 8 } tRPAdminPSDefaultActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionOrigin specifies the origin of the route exported into BGP if it does not match an entry." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 9 } tRPAdminPSDefaultActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true(1), use the value of tRPAdminPSDefaultActionLocalPreference for local preference." DEFVAL { false } ::= { tRPAdminPSDefaultActionParamsEntry 10 } tRPAdminPSDefaultActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Local preference to apply to the route. Set tRPAdminPSDefaultActionLocalPreferenceSet to false(2) to disable." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 11 } tRPAdminPSDefaultActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "Action for tRPAdminPSDefaultActionMetricValue." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 12 } tRPAdminPSDefaultActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Add, subtract, or set metric value. Ignored when tRPAdminPSDefaultActionMetric is none(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 13 } tRPAdminPSDefaultActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Preference to apply to the route." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 15 } tRPAdminPSDefaultActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-create STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 16 } tRPAdminPSDefaultActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionNextHopSelf specifies the next-hop-self on the route. Next-hop-self cannot be set to 'true' at the same time as setting next-hop object tRPAdminPSDefActInetNextHop to a valid IP address. Setting tRPAdminPSDefaultActionNextHopSelf to 'true' will reset tRPAdminPSDefActInetNextHop object to disable." DEFVAL { false } ::= { tRPAdminPSDefaultActionParamsEntry 17 } tRPAdminPSDefaultActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'." DEFVAL { 'FFFFFFFF'H } ::= { tRPAdminPSDefaultActionParamsEntry 18 } tRPAdminPSDefaultActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionTag specifies the tag for the route. A value of 0 for tRPAdminPSDefaultActionTag specifies that tagging is disabled." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 19 } tRPAdminPSDefaultActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF route type for the route." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 20 } tRPAdminPSDefActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActInetNextHopType specifies the type of tRPAdminPSDefActInetNextHop address, as defined in the InetAddress MIB." ::= { tRPAdminPSDefaultActionParamsEntry 21 } tRPAdminPSDefActInetNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActInetNextHop specifies the next-hop IP address in the route. To disable, tRPAdminPSDefActInetNextHopType should be set to 'ipv6' and tRPAdminPSDefActInetNextHop should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of tRPAdminPSDefActInetNextHopType object. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self object 'tRPAdminPSDefaultActionNextHopSelf' to 'true'. Setting next-hop to a valid IP address will reset tRPAdminPSDefaultActionNextHopSelf to 'false'. tRPAdminPSDefActInetNextHop object replaces tRPAdminPSDefaultActionNextHop that supports only IPv4 address style next-hop." ::= { tRPAdminPSDefaultActionParamsEntry 22 } tRPAdminPSDefaultActionASPathPnd OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionASPathPnd specifies the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPAdminPSDefaultActionASPathPrependCount is zero." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 23 } tRPAdminPSDefActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActMcRedirSvcId specifies the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 30 } tRPAdminPSDefActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActMcRedirIfIndex specifies the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 31 } tRPAdminPSDefActionMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionMetricSource specifies the source of the default action metric. When the value of tRPAdminPSDefActionMetricSource is set to 'igpCost(1)', the value of tRPAdminPSDefaultActionMetricValue is ignored and the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route. The default value of tRPAdminPSDefActionMetricSource is 'metricVal(2)' which means the metric value is the value of tRPAdminPSDefaultActionMetricValue." DEFVAL { metricVal } ::= { tRPAdminPSDefaultActionParamsEntry 32 } tRPAdminPSDefActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAigpMetric specifies the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. The value of tRPAdminPSDefActionAigpMetric decides how to apply tRPAdminPSDefActnAigpMetricVal to the route. When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActnAigpMetricVal is ignored." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 33 } tRPAdminPSDefActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActnAigpMetricVal specifies the value to add or set for the route AIGP(Accumulated IGP) metric. When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActnAigpMetricVal is ignored." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 34 } -- -- policy-statement entry params -- tRPAdminPSParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entries." ::= { tRPAdminValueObjects 7 } tRPAdminPSParamsEntry OBJECT-TYPE SYNTAX TRPAdminPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy statement entry. Entries are created by user. Entries are deleted by user." INDEX { tRPAdminPolicyStatementName, tRPAdminPSNameEntryIndex } ::= { tRPAdminPSParamsTable 1 } TRPAdminPSParamsEntry ::= SEQUENCE { tRPAdminPSNameEntryIndex TPolicyStatementEntryID, tRPAdminPSParamsRowStatus RowStatus, tRPAdminPSParamsDescription TItemDescription, tRPAdminPSParamsAction TPolicyEntryAction } tRPAdminPSNameEntryIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID of this policy statement entry." ::= { tRPAdminPSParamsEntry 1 } tRPAdminPSParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSParamsTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSParamsTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminPSParamsEntry 2 } tRPAdminPSParamsDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "Description for this policy statement entry." DEFVAL { ''H } ::= { tRPAdminPSParamsEntry 3 } tRPAdminPSParamsAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action to take when a route matches this policy statement entry's to or from criteria." ::= { tRPAdminPSParamsEntry 4 } -- -- policy-statement default action -- tRPAdminPSAcceptActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action parameters for a policy-statement." ::= { tRPAdminValueObjects 8 } tRPAdminPSAcceptActionParamsEntry OBJECT-TYPE SYNTAX TRPAdminPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information for a particular policy-statement entry. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPAdminPolicyStatementName, tRPAdminPSNameEntryIndex } ::= { tRPAdminPSAcceptActionParamsTable 1 } TRPAdminPSAcceptActionParamsEntry ::= SEQUENCE { tRPAdminPSAcceptActionASPath TPolicyEntryEdit, tRPAdminPSAcceptActionASPathName TASPathName, tRPAdminPSAcceptActionASPathPrependAS TmnxBgpAutonomousSystem, tRPAdminPSAcceptActionASPathPrependCount INTEGER, tRPAdminPSAcceptActionCommunity1 TPolicyEntryEdit, tRPAdminPSAcceptActionCommunityName1 TCommunityName, tRPAdminPSAcceptActionCommunity2 TPolicyEntryEdit, tRPAdminPSAcceptActionCommunityName2 TCommunityName, tRPAdminPSAcceptActionOrigin TPolicyEntryCriteriaOrigin, tRPAdminPSAcceptActionLocalPreferenceSet TruthValue, tRPAdminPSAcceptActionLocalPreference TmnxBgpLocalPreference, tRPAdminPSAcceptActionMetric TPolicyEntryEdit, tRPAdminPSAcceptActionMetricValue Unsigned32, tRPAdminPSAcceptActionPreference TmnxBgpPreference, tRPAdminPSAcceptActionDamping TDampingName, tRPAdminPSAcceptActionNextHopSelf TruthValue, tRPAdminPSAcceptActionNextHop IpAddress, tRPAdminPSAcceptActionTag TPolicyActionTag, tRPAdminPSAcceptActionOspfType TOspfRouteType, tRPAdminPSAcptActInetNextHopType InetAddressType, tRPAdminPSAcptActInetNextHop InetAddress, tRPAdminPSAcceptActionASPathPend InetAutonomousSystemNumber, tRPAdminPSAcceptActionFC TNamedItemOrEmpty, tRPAdminPSAcceptActionFCPriority TPriorityOrUndefined, tRPAdminPSAcptActMcRedirSvcId TmnxServId, tRPAdminPSAcptActMcRedirIfIndex InterfaceIndexOrZero, tRPAdminPSAcptActnMetricSource TPolicyActionMetricSource, tRPAdminPSAcptActionAigpMetric TPolicyEntryAigpMetricEdit, tRPAdminPSAcptActnAigpMetricVal Unsigned32 } tRPAdminPSAcceptActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The AS Path rewrite information for the route." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 1 } tRPAdminPSAcceptActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-create STATUS current DESCRIPTION "AS Path Name to add, remove, or replace. Ignored when tRPAdminPSAcceptActionASPath is none(1)" DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 2 } tRPAdminPSAcceptActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPAdminPSAcceptActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPAdminPSAcceptActionASPathPend." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 3 } tRPAdminPSAcceptActionASPathPrependCount OBJECT-TYPE SYNTAX INTEGER (0..50) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of times to prepend tRPAdminPSAcceptActionASPathPend to the route. Set to zero to disable this feature." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 4 } tRPAdminPSAcceptActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "How to apply tRPAdminPSAcceptActionCommunityName1 to the route." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 5 } tRPAdminPSAcceptActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "Community to apply to the route. Ignored when tRPAdminPSAcceptActionCommunity1 is set to none(1)." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 6 } tRPAdminPSAcceptActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "How to apply tRPAdminPSAcceptActionCommunityName2 to the route." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 7 } tRPAdminPSAcceptActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "Community to apply to the route. Ignored when tRPAdminPSAcceptActionCommunity2 is set to none(1)." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 8 } tRPAdminPSAcceptActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionOrigin specifies the origin of the route exported into BGP if it matches an entry." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 9 } tRPAdminPSAcceptActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true(1), use tRPAdminPSAcceptActionLocalPreference for the local preference for the route." DEFVAL { false } ::= { tRPAdminPSAcceptActionParamsEntry 10 } tRPAdminPSAcceptActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Local preference for the route. Ignored when tRPAdminPSAcceptActionLocalPreferenceSet is false(2)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 11 } tRPAdminPSAcceptActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "How to apply tRPAdminPSAcceptActionMetricValue to the route." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 12 } tRPAdminPSAcceptActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Value to add, subtract, or set for the route metric. Ignored when tRPAdminPSAcceptActionMetric is none(1)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 13 } tRPAdminPSAcceptActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Preference to set in route." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 15 } tRPAdminPSAcceptActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-create STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 16 } tRPAdminPSAcceptActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionNextHopSelf specifies the next-hop-self on the route. Next-hop-self cannot be set to 'true' at the same time as setting next-hop object tRPAdminPSAcptActInetNextHop to a valid IP address. Setting tRPAdminPSAcceptActionNextHopSelf to 'true' will reset tRPAdminPSAcptActInetNextHop object to disable." DEFVAL { false } ::= { tRPAdminPSAcceptActionParamsEntry 17 } tRPAdminPSAcceptActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Set next-hop address in route. Set to 255.255.255.255 to disable. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self to 'true'. Setting next-hop to a valid IP address will reset next-hop-self to 'false'." DEFVAL { 'FFFFFFFF'H } ::= { tRPAdminPSAcceptActionParamsEntry 18 } tRPAdminPSAcceptActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionTag specifies the tag for the route. A value of 0 for tRPAdminPSAcceptActionTag when specifies that tagging is disabled." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 19 } tRPAdminPSAcceptActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF route type to set in route." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 20 } tRPAdminPSAcptActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActInetNextHopType specifies the type of tRPAdminPSAcptActInetNextHop address, as defined in the InetAddress MIB." ::= { tRPAdminPSAcceptActionParamsEntry 21 } tRPAdminPSAcptActInetNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActInetNextHop specifies the next-hop IP address in the route. To disable, tRPAdminPSAcptActInetNextHopType should be set to 'ipv6' and tRPAdminPSAcptActInetNextHop should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of the tRPAdminPSAcptActInetNextHopType object. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self object 'tRPAdminPSAcceptActionNextHopSelf' to 'true'. Setting next-hop to a valid IP address will reset tRPAdminPSAcceptActionNextHopSelf to 'false'. tRPAdminPSAcptActInetNextHop object replaces tRPAdminPSAcceptActionNextHop that supports only IPv4 address style next-hop." ::= { tRPAdminPSAcceptActionParamsEntry 22 } tRPAdminPSAcceptActionASPathPend OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionASPathPend specifies the AS Number to prepend to the AS-Path attribute of the route. Value of this object is ignored when tRPAdminPSAcceptActionASPathPrependCount is zero." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 23 } tRPAdminPSAcceptActionFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionFC specifies the forwarding class associated with the routes matched by this route policy entry. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when tRPAdminPSParamsAction is set either to 'reject' or 'none'." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 24 } tRPAdminPSAcceptActionFCPriority OBJECT-TYPE SYNTAX TPriorityOrUndefined MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionFCPriority specifies the priority to be assigned to the routes matched by this route policy entry. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when tRPAdminPSParamsAction is set either to 'reject' or 'none'." DEFVAL { undefined } ::= { tRPAdminPSAcceptActionParamsEntry 25 } tRPAdminPSAcptActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActMcRedirSvcId specifies the service ID of the service where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 30 } tRPAdminPSAcptActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActMcRedirIfIndex specifies the interface index of the interface where to redirect IGMP multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 31 } tRPAdminPSAcptActnMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActnMetricSource specifies the source of the accept action metric. When the value of tRPAdminPSAcptActnMetricSource is set to 'igpCost(1)' the value of tRPAdminPSAcceptActionMetricValue is ignored and the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route. The default value of tRPAdminPSAcptActnMetricSource is 'metricVal(2)' which means the metric value is the value of tRPAdminPSDefaultActionMetricValue." DEFVAL { metricVal } ::= { tRPAdminPSAcceptActionParamsEntry 32 } tRPAdminPSAcptActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActionAigpMetric specifies the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. The value of tRPAdminPSAcptActionAigpMetric decides how to apply tRPAdminPSAcptActnAigpMetricVal to the route. When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActnAigpMetricVal is ignored." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 33 } tRPAdminPSAcptActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActnAigpMetricVal specifies the value to add or set for the route AIGP(Accumulated IGP) metric. When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActnAigpMetricVal is ignored." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 34 } -- -- policy-statement entry to -- tRPAdminPSToCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entry 'to' criteria" ::= { tRPAdminValueObjects 9 } tRPAdminPSToCriteriaEntry OBJECT-TYPE SYNTAX TRPAdminPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry -to- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPAdminPolicyStatementName, tRPAdminPSToCriteriaIndex } ::= { tRPAdminPSToCriteriaTable 1 } TRPAdminPSToCriteriaEntry ::= SEQUENCE { tRPAdminPSToCriteriaIndex TPolicyStatementEntryID, tRPAdminPSToCriteriaRowStatus RowStatus, tRPAdminPSToCriteriaProtocol TRoutePolicyProtocol, tRPAdminPSToCriteriaNeighborIpAddr IpAddress, tRPAdminPSToCriteriaNeighborPrefixList TPrefixListName, tRPAdminPSToCriteriaIsisLevel TIsisLevel, tRPAdminPSToCriteriaPrefixList1 TPrefixListName, tRPAdminPSToCriteriaPrefixList2 TPrefixListName, tRPAdminPSToCriteriaPrefixList3 TPrefixListName, tRPAdminPSToCriteriaPrefixList4 TPrefixListName, tRPAdminPSToCriteriaPrefixList5 TPrefixListName, tRPAdminPSToCritNbrInetAddrType InetAddressType, tRPAdminPSToCritNbrInetAddr InetAddress, tRPAdminPSToCriteriaInstanceId Unsigned32 } tRPAdminPSToCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPAdminPSToCriteriaEntry 1 } tRPAdminPSToCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSToCriteriaTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSToCriteriaTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminPSToCriteriaEntry 2 } tRPAdminPSToCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol name to match on. Set to none(1) to disable." DEFVAL { none } ::= { tRPAdminPSToCriteriaEntry 3 } tRPAdminPSToCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 0.0.0.0 to disable." DEFVAL { '00000000'H } ::= { tRPAdminPSToCriteriaEntry 4 } tRPAdminPSToCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 5 } tRPAdminPSToCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value for tRPAdminPSToCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." DEFVAL { 0 } ::= { tRPAdminPSToCriteriaEntry 7 } tRPAdminPSToCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList1 specifies the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 8 } tRPAdminPSToCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList2 specifies the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 9 } tRPAdminPSToCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList3 specifies the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 10 } tRPAdminPSToCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList4 specifies the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 11 } tRPAdminPSToCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList5 specifies the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 12 } tRPAdminPSToCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritNbrInetAddrType specifies the type of tRPAdminPSToCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPAdminPSToCriteriaEntry 13 } tRPAdminPSToCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritNbrInetAddr specifies the IP address of neighbor to match on. To disable, tRPAdminPSToCritNbrInetAddrType should be set to 'ipv6' and tRPAdminPSToCritNbrInetAddr should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of the tRPAdminPSToCritNbrInetAddrType object. tRPAdminPSToCritNbrInetAddr object replaces tRPAdminPSToCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPAdminPSToCriteriaEntry 14 } tRPAdminPSToCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31| 4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPAdminPSToCriteriaInstanceId is set to 4294967295, all instances of OSPF protocol are leaked into BGP." DEFVAL { 0 } ::= { tRPAdminPSToCriteriaEntry 15 } -- -- policy-statement entry from -- tRPAdminPSFromCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of from filter criteria for each policy-statement entry." ::= { tRPAdminValueObjects 10 } tRPAdminPSFromCriteriaEntry OBJECT-TYPE SYNTAX TRPAdminPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry -from- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPAdminPolicyStatementName, tRPAdminPSFromCriteriaIndex } ::= { tRPAdminPSFromCriteriaTable 1 } TRPAdminPSFromCriteriaEntry ::= SEQUENCE { tRPAdminPSFromCriteriaIndex TPolicyStatementEntryID, tRPAdminPSFromCriteriaRowStatus RowStatus, tRPAdminPSFromCriteriaProtocol TRoutePolicyProtocol, tRPAdminPSFromCriteriaNeighborIpAddr IpAddress, tRPAdminPSFromCriteriaNeighborPrefixList TPrefixListName, tRPAdminPSFromCriteriaPrefixList1 TPrefixListName, tRPAdminPSFromCriteriaPrefixList2 TPrefixListName, tRPAdminPSFromCriteriaPrefixList3 TPrefixListName, tRPAdminPSFromCriteriaPrefixList4 TPrefixListName, tRPAdminPSFromCriteriaPrefixList5 TPrefixListName, tRPAdminPSFromCriteriaASPath TASPathName, tRPAdminPSFromCriteriaCommunity TCommunityName, tRPAdminPSFromCriteriaOrigin TPolicyEntryCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType TOspfRouteType, tRPAdminPSFromCriteriaArea IpAddress, tRPAdminPSFromCriteriaAreaConfigured TruthValue, tRPAdminPSFromCriteriaIsisLevel TIsisLevel, tRPAdminPSFromCriteriaIsisExternal TruthValue, tRPAdminPSFromCriteriaIgmpHostPrefixList TPrefixListName, tRPAdminPSFromCriteriaGrpAddrPrefixList TPrefixListName, tRPAdminPSFromCriteriaSrcAddr IpAddress, tRPAdminPSFromCriteriaInterface TNamedItemOrEmpty, tRPAdminPSFromCriteriaTag TPolicyActionTag, tRPAdminPSFromCritNbrInetAddrType InetAddressType, tRPAdminPSFromCritNbrInetAddr InetAddress, tRPAdminPSFromCritSrcInetAddrType InetAddressType, tRPAdminPSFromCritSrcInetAddr InetAddress, tRPAdminPSFromCriteriaFamily TmnxBGPFamilyType, tRPAdminPSFromCriteriaInstanceId Unsigned32, tRPAdminPSFromCriteriaMatchTag TmnxEnabledDisabled, tRPAdminPSFromCriteriaState TPolicyEntryCriteriaState, tRPAdminPSFromCritASPathGroup TNamedItemOrEmpty } tRPAdminPSFromCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPAdminPSFromCriteriaEntry 1 } tRPAdminPSFromCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To Create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSFromCriteriaTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSFromCriteriaTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminPSFromCriteriaEntry 2 } tRPAdminPSFromCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol name to match on. Set to none(1) to disable." DEFVAL { none } ::= { tRPAdminPSFromCriteriaEntry 3 } tRPAdminPSFromCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 0.0.0.0 to disable." DEFVAL { '00000000'H } ::= { tRPAdminPSFromCriteriaEntry 4 } tRPAdminPSFromCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 5 } tRPAdminPSFromCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the first prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 6 } tRPAdminPSFromCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the second prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 7 } tRPAdminPSFromCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the third prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 8 } tRPAdminPSFromCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the fourth prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 9 } tRPAdminPSFromCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the fifth prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 10 } tRPAdminPSFromCriteriaASPath OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the AS Path to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 11 } tRPAdminPSFromCriteriaCommunity OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the community to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 12 } tRPAdminPSFromCriteriaOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaOrigin specifies the route match criterion for an entry." DEFVAL { none } ::= { tRPAdminPSFromCriteriaEntry 13 } tRPAdminPSFromCriteriaOspfRouteType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF route type to match on. Set to zero to disable." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 14 } tRPAdminPSFromCriteriaArea OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Used when redistributing OSPF routes into other protocols. Specifies the OSPF area that must be matched in filtered routes." ::= { tRPAdminPSFromCriteriaEntry 16 } tRPAdminPSFromCriteriaAreaConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies if the tRPAdminPSFromCriteriaArea has been configured" ::= { tRPAdminPSFromCriteriaEntry 17 } tRPAdminPSFromCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value for tRPAdminPSFromCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 18 } tRPAdminPSFromCriteriaIsisExternal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When tRPAdminPSFromCriteriaIsisExternal is 'true', match only External IS-IS routes. If 'false', match all routes. External IS-IS routes are those routes that have been learned from outside the IS-IS domain." DEFVAL { false } ::= { tRPAdminPSFromCriteriaEntry 19 } tRPAdminPSFromCriteriaIgmpHostPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaIgmpHostPrefixList contains the name of the prefix list that is used to match the IGMP host IP address. This object is set to empty string to disable." ::= { tRPAdminPSFromCriteriaEntry 20 } tRPAdminPSFromCriteriaGrpAddrPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaGrpAddrPrefixList contains the name of the prefix list that is used to match the multicast group address. This object is set to empty string to disable." ::= { tRPAdminPSFromCriteriaEntry 21 } tRPAdminPSFromCriteriaSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaSrcAddr contains the IP address of the source to match on. It is used by multicast protocols like IGMP and PIM. This object is set to 0.0.0.0 to disable." ::= { tRPAdminPSFromCriteriaEntry 22 } tRPAdminPSFromCriteriaInterface OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaInterface contains the name of the interface to match on. PIM Bootstrap route policy will use this object to accept/reject bootstrap messages coming on the interface specified by this object. This object is set to empty string to disable." ::= { tRPAdminPSFromCriteriaEntry 23 } tRPAdminPSFromCriteriaTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaTag specifies the route tag to match on. Routes will only be matched on this value when tRPAdminPSFromCriteriaMatchTag is enabled. A value of 0 for tRPAdminPSFromCriteriaTag when tRPAdminPSFromCriteriaMatchTag is enabled would match untagged routes." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 24 } tRPAdminPSFromCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritNbrInetAddrType specifies the type of tRPAdminPSFromCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPAdminPSFromCriteriaEntry 25 } tRPAdminPSFromCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritNbrInetAddr specifies the IP address of neighbor to match on. To disable, tRPAdminPSFromCritNbrInetAddrType should be set to 'ipv6' and tRPAdminPSFromCritNbrInetAddr should be set to ffff:ffff:ffff:ffff:ffff:ffff:fffff:ffff. The type of this address is determined by the value of the tRPAdminPSFromCritNbrInetAddrType object. tRPAdminPSFromCritNbrInetAddr object replaces tRPAdminPSFromCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPAdminPSFromCriteriaEntry 26 } tRPAdminPSFromCritSrcInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritSrcInetAddrType specifies the type of tRPAdminPSFromCritSrcInetAddr address, as defined in the InetAddress MIB." ::= { tRPAdminPSFromCriteriaEntry 27 } tRPAdminPSFromCritSrcInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritSrcInetAddr specifies the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP. To disable, tRPAdminPSFromCritSrcInetAddrType should be set to 'ipv4' and tRPAdminPSFromCritSrcInetAddr should be set to 255.255.255.255. The type of this address is determined by the value of the tRPAdminPSFromCritSrcInetAddrType object. tRPAdminPSFromCritSrcInetAddr object replaces tRPAdminPSFromCriteriaSrcAddr that supports only IPv4 address style source." ::= { tRPAdminPSFromCriteriaEntry 28 } tRPAdminPSFromCriteriaFamily OBJECT-TYPE SYNTAX TmnxBGPFamilyType MAX-ACCESS read-create STATUS current DESCRIPTION "The bits set in the value of tRPAdminPSFromCriteriaFamily specifies the address families that this condition would match against." DEFVAL { {} } ::= { tRPAdminPSFromCriteriaEntry 29 } tRPAdminPSFromCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31| 4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaInstanceId indicates instance of a version of the OSPF protocol running in the router instance. If the value of tRPAdminPSToCriteriaInstanceId is set to 4294967295, all instances of OSPF protocol are leaked into BGP." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 30 } tRPAdminPSFromCriteriaMatchTag OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaMatchTag specifies if tag matching is enabled or disabled. Disabling of this object will set tRPAdminPSFromCriteriaTag to zero." DEFVAL { disabled } ::= { tRPAdminPSFromCriteriaEntry 31 } tRPAdminPSFromCriteriaState OBJECT-TYPE SYNTAX TPolicyEntryCriteriaState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaState specifies the route state match criterion for this entry." DEFVAL { none } ::= { tRPAdminPSFromCriteriaEntry 32 } tRPAdminPSFromCritASPathGroup OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritASPathGroup specifies the AS-Path Group match criterion for this entry." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaEntry 33 } -- -- Administrative value control objects -- tRPAdminOwner OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Who has last initialized the administrative tables, who is making all the changes, and who is expected to either commit or re-initialize (ABORT-TRANSACTION). tRPAdminOwner is advisory only. Before beginning a transaction, read tRPAdminOwner. If it is empty then proceed with the configuration. Set tRPAdminOwner after setting tRPAdminControlApply so that other users will be advised to not make changes to the Admin tables. Agent sets tRPAdminOwner to empty string after tRPAdminControlApply is set - either by user initializing or committing, or by agent timing out the uncommitted transactions (tRPAdminLastSetTimer)." ::= { tRPAdminControlObjects 1 } tRPAdminControlApply OBJECT-TYPE SYNTAX INTEGER { none(1), initialize(2), commit(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the use of tRPAdminValueObjects tables. This object always reads none(1). When set to initialize(2), the objects in tRPAdminValueObjects tables are set to the current Operational values, from the corresponding tRPOperValueObjects tables. Any uncommitted changes are lost, so setting this value corresponds to both BEGIN-TRANSACTION and ABORT-TRANSACTION. When set to commit(3) (END-TRANSACTION), all of the objects from tRPAdminValueObjects tables are copied to the corresponding tRPOperValueObjects table objects. Then, all routes are re-evaluated with the new policies. Later arriving routes are evaluated with the new policies. In this way, the (expensive) route re-evaluation can be performed at one time, with a coherent route policy configuration." ::= { tRPAdminControlObjects 2 } tRPAdminLastSetTimer OBJECT-TYPE SYNTAX TimeInterval UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining until the agent re-initializes the administrative tables. If tRPAdminControlApply is not set to commit(3) within tRPAdminLastSetTimeout centiseconds, the agent will set it to initialize(2) and all uncommitted changes will be lost. This way, uncommitted changes from failed (uncompleted) change sets will eventually be removed, and another transaction can safely begin. This object is reset to tRPAdminLastSetTimeout after SNMP SET operation to any of the tRPAdminValueObjects tables." ::= { tRPAdminControlObjects 3 } tRPAdminLastSetTimeout OBJECT-TYPE SYNTAX TimeInterval UNITS "centiseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout for tRPAdminLastSetTimer. The value zero is not allowed." DEFVAL { 180000 } -- 30 minutes ::= { tRPAdminControlObjects 4 } -- -- Oper prefix-list -- tRPOperInetPrefixListTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tRPOperInetPrefixListTblLastChg indicates the timestamp of last change to tRPOperInetPrefixListTable. tRPOperInetPrefixListTblLastChg is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 21 } -- tRPOperInetPrefixListTable replaces the tRPOperPrefixListTable -- that lists only IPv4 address style prefix lists. -- The tRPOperInetPrefixListTable is IP version -- neutral and lists IPv4 and IPv6 InetAddress style -- prefix lists. tRPOperInetPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IPv4 and IPv6 operational prefix lists." ::= { tRPOperValueObjects 22 } tRPOperInetPrefixListEntry OBJECT-TYPE SYNTAX TRPOperInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperInetPrefixListTable represents information about a particular prefix list. Entries are created by user via tRPAdminInetPrefixListTable. Entries are deleted by user via tRPAdminInetPrefixListTable. A prefix list name entry must exist before referring objects (tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSToCriteriaPrefixList1 - 5, tRPAdminPSFromCriteriaPrefixList1 - 5) can be set to that name." INDEX { tRPOperInetPrefixListName, tRPOperInetPrefixListPrefixType, tRPOperInetPrefixListPrefix, tRPOperInetPrefixListPrefixLen, tRPOperInetPrefixListType } ::= { tRPOperInetPrefixListTable 1 } TRPOperInetPrefixListEntry ::= SEQUENCE { tRPOperInetPrefixListName TPrefixListName, tRPOperInetPrefixListPrefixType InetAddressType, tRPOperInetPrefixListPrefix InetAddress, tRPOperInetPrefixListPrefixLen InetAddressPrefixLength, tRPOperInetPrefixListType INTEGER, tRPOperInetPrefixListRowStatus RowStatus, tRPOperInetPrefixListThroughLen InetAddressPrefixLength, tRPOperInetPrefixListLastChg TimeStamp, tRPOperInetPrefixListBeginLen InetAddressPrefixLength } tRPOperInetPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListName indicates the name of the prefix list entry." ::= { tRPOperInetPrefixListEntry 1 } tRPOperInetPrefixListPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListPrefixType indicates the address type of tRPOperInetPrefixListPrefix." ::= { tRPOperInetPrefixListEntry 2 } tRPOperInetPrefixListPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListPrefix indicates the IP prefix of the prefix list entry." ::= { tRPOperInetPrefixListEntry 3 } tRPOperInetPrefixListPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListPrefixLen indicates the IP prefix length of the prefix list entry." ::= { tRPOperInetPrefixListEntry 4 } tRPOperInetPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact(1), longer(2), through(3), range(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListType indicates the type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPOperInetPrefixListBeginLen and less than or equal to the length defined by tRPOperInetPrefixListThroughLen in order for an entry to be considered a match." ::= { tRPOperInetPrefixListEntry 5 } tRPOperInetPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. Values read will only be active(1), notInService(2), notReady(3). To create or destroy entries in this table, use the tRPAdminInetPrefixListTable." ::= { tRPOperInetPrefixListEntry 6 } tRPOperInetPrefixListThroughLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperInetPrefixListThroughLen indicates the prefix length to use when tRPOperInetPrefixListType set to through(3). The value must be larger than tRPOperInetPrefixListPrefixLen." ::= { tRPOperInetPrefixListEntry 7 } tRPOperInetPrefixListLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tRPOperInetPrefixListLastChg indicates the timestamp of last change to this entry. tRPOperInetPrefixListLastChg is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperInetPrefixListEntry 8 } tRPOperInetPrefixListBeginLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperInetPrefixListBeginLen indicates the prefix length to use as the lower limit for the prefix range when tRPOperInetPrefixListType set to range(4). The value must be larger than tRPOperInetPrefixListPrefixLen and less than tRPOperInetPrefixListThroughLen." ::= { tRPOperInetPrefixListEntry 9 } -- -- Admin prefix-list -- -- tRPAdminInetPrefixListTable replaces the tRPAdminPrefixListTable -- that allows configuration of only IPv4 address style prefix lists. -- The tRPOperInetPrefixListTable is IP version neutral and allows -- IPv4 and IPv6 InetAddress style prefix lists. tRPAdminInetPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IPv4 and IPv6 admin prefix lists." ::= { tRPAdminValueObjects 11 } tRPAdminInetPrefixListEntry OBJECT-TYPE SYNTAX TRPAdminInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminInetPrefixListEntry represents information about a particular prefix list. Entries are created by user. Entries are deleted by user." INDEX { tRPAdminInetPrefixListName, tRPAdminInetPrefixListPrefixType, tRPAdminInetPrefixListPrefix, tRPAdminInetPrefixListPrefixLen, tRPAdminInetPrefixListType} ::= { tRPAdminInetPrefixListTable 1 } TRPAdminInetPrefixListEntry ::= SEQUENCE { tRPAdminInetPrefixListName TPrefixListName, tRPAdminInetPrefixListPrefixType InetAddressType, tRPAdminInetPrefixListPrefix InetAddress, tRPAdminInetPrefixListPrefixLen InetAddressPrefixLength, tRPAdminInetPrefixListType INTEGER, tRPAdminInetPrefixListRowStatus RowStatus, tRPAdminInetPrefixListThroughLen InetAddressPrefixLength, tRPAdminInetPrefixListBeginLen InetAddressPrefixLength } tRPAdminInetPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListName indicates the name of the prefix list entry." ::= { tRPAdminInetPrefixListEntry 1 } tRPAdminInetPrefixListPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListPrefixType indicates the address type of tRPAdminInetPrefixListPrefix." ::= { tRPAdminInetPrefixListEntry 2 } tRPAdminInetPrefixListPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListPrefix indicates the IP prefix of the prefix list entry." ::= { tRPAdminInetPrefixListEntry 3 } tRPAdminInetPrefixListPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListPrefixLen indicates the IP prefix length of the prefix list entry." ::= { tRPAdminInetPrefixListEntry 4 } tRPAdminInetPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact(1), longer(2), through(3), range(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListType indicates the type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix-list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPAdminInetPrefixListBeginLen and less than or equal to the length defined by tRPAdminInetPrefixListThroughLen in order for an entry to be considered a match." ::= { tRPAdminInetPrefixListEntry 5 } tRPAdminInetPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. Legal values to write are: active(1), notInService(2), createAndGo(4), createAndWait(5), destroy(6). To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperInetPrefixListTable. To destroy a row, set this object to destroy(6). If there are no objects that refer to the entry, when tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperInetPrefixListTable. If there are objects that refer to the entry, the destroy SET request will fail with an error." ::= { tRPAdminInetPrefixListEntry 6 } tRPAdminInetPrefixListThroughLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListThroughLen specifies the prefix length to use when tRPAdminPrefixListType set to through(3). The value must be larger than tRPAdminInetPrefixListPrefixLen." DEFVAL { 0 } ::= { tRPAdminInetPrefixListEntry 7 } tRPAdminInetPrefixListBeginLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListBeginLen specifies the prefix length to use as the lower limit for the prefix range when tRPAdminInetPrefixListType set to range(4). The value must be larger than tRPAdminInetPrefixListPrefixLen and less than tRPAdminInetPrefixListThroughLen." DEFVAL { 0 } ::= { tRPAdminInetPrefixListEntry 8 } -- -- Operational community expressions -- tRPOperCommunityExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPOperValueObjects 25 } tRPOperCommunityExprEntry OBJECT-TYPE SYNTAX TRPOperCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community member. Entries are created by user, via tRPAdminCommunityExprTable. Entries are deleted by user, via tRPAdminCommunityExprTable." INDEX { tRPOperCommunityExprName } ::= { tRPOperCommunityExprTable 1 } TRPOperCommunityExprEntry ::= SEQUENCE { tRPOperCommunityExprName TCommunityName, tRPOperCommunityExprRowStatus RowStatus, tRPOperCommunityExprString1 TCommunityExpression, tRPOperCommunityExprString2 TCommunityExpression, tRPOperCommunityExprString3 TCommunityExpression, tRPOperCommunityExprString4 TCommunityExpression } tRPOperCommunityExprName OBJECT-TYPE SYNTAX TCommunityName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of object tRPOperCommunityExprName indicates the name of the community used as an index for this table." ::= { tRPOperCommunityExprEntry 1 } tRPOperCommunityExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminCommunityExprTable." ::= { tRPOperCommunityExprEntry 2 } tRPOperCommunityExprString1 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString1 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression." ::= { tRPOperCommunityExprEntry 3 } tRPOperCommunityExprString2 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString2 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression." ::= { tRPOperCommunityExprEntry 4 } tRPOperCommunityExprString3 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString3 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression." ::= { tRPOperCommunityExprEntry 5 } tRPOperCommunityExprString4 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString4 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityExpression." ::= { tRPOperCommunityExprEntry 6 } -- -- Admininstrative community expressions -- tRPAdminCommunityExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPAdminValueObjects 12 } tRPAdminCommunityExprEntry OBJECT-TYPE SYNTAX TRPAdminCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community name member. Entries are created by user. Entries are deleted by user." INDEX { tRPAdminCommunityExprName } ::= { tRPAdminCommunityExprTable 1 } TRPAdminCommunityExprEntry ::= SEQUENCE { tRPAdminCommunityExprName TCommunityName, tRPAdminCommunityExprRowStatus RowStatus, tRPAdminCommunityExprString1 TCommunityExpression, tRPAdminCommunityExprString2 TCommunityExpression, tRPAdminCommunityExprString3 TCommunityExpression, tRPAdminCommunityExprString4 TCommunityExpression } tRPAdminCommunityExprName OBJECT-TYPE SYNTAX TCommunityName (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminCommunityExprName indicates the name of the community used as an index for this table." ::= { tRPAdminCommunityExprEntry 1 } tRPAdminCommunityExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminCommunityExprRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. The value of tRPAdminCommunityExprString1 must be set to a non-empty string in the same SNMP SET PDU for the row creation to succeed. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperCommunityExprTable. When the value of this object is set to 'createAndWait(5)', a new entry is created with value of this object set to 'notInService(2)' and the tRPAdminCommunityExprString1-4 strings can be configured separately. When the value of this object is set to 'active(1)', the values of objects tRPAdminCommunityExprString1-4, are concatenated to form one expression of at most 900 characters. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperCommunityExprTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperCommunityExprTable." ::= { tRPAdminCommunityExprEntry 2 } tRPAdminCommunityExprString1 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 3 } tRPAdminCommunityExprString2 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 4 } tRPAdminCommunityExprString3 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 5 } tRPAdminCommunityExprString4 OBJECT-TYPE SYNTAX TCommunityExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 6 } -- -- Operational AS-Path Group Table -- tRPOperASPathGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of AS-Path Groups." ::= { tRPOperValueObjects 26 } tRPOperASPathGroupEntry OBJECT-TYPE SYNTAX TRPOperASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperASPathGroupTable represents information about a particular AS-Path Group. Entries are created by user via tRPAdminASPathGroupTable. Entries are deleted by user via tRPAdminASPathGroupTable." INDEX { tRPOperASPathGroupName, tRPOperASPathGroupEntryIndex } ::= { tRPOperASPathGroupTable 1 } TRPOperASPathGroupEntry ::= SEQUENCE { tRPOperASPathGroupName TNamedItem, tRPOperASPathGroupEntryIndex Unsigned32, tRPOperASPathGroupRowStatus RowStatus, tRPOperASPathGroupASPathName TASPathName } tRPOperASPathGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperASPathGroupName indicates the name of the AS-Path Group." ::= { tRPOperASPathGroupEntry 1 } tRPOperASPathGroupEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperASPathGroupEntryIndex indicates the index of the entry in the AS-Path Group." ::= { tRPOperASPathGroupEntry 2 } tRPOperASPathGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperASPathGroupRowStatus indicates the RowStatus for this entry. To create or destroy entries in this table, use the tRPAdminASPathGroupTable." ::= { tRPOperASPathGroupEntry 3 } tRPOperASPathGroupASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperASPathGroupASPathName indicates the name of the AS-Path from the tRPOperASPathTable." ::= { tRPOperASPathGroupEntry 4 } -- -- Admininstrative AS-Path Group Table -- tRPAdminASPathGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of AS-Path Groups." ::= { tRPAdminValueObjects 13 } tRPAdminASPathGroupEntry OBJECT-TYPE SYNTAX TRPAdminASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminASPathGroupTable represents information about a particular AS-Path Group." INDEX { tRPAdminASPathGroupName, tRPAdminASPathGroupEntryIndex } ::= { tRPAdminASPathGroupTable 1 } TRPAdminASPathGroupEntry ::= SEQUENCE { tRPAdminASPathGroupName TNamedItem, tRPAdminASPathGroupEntryIndex Unsigned32, tRPAdminASPathGroupRowStatus RowStatus, tRPAdminASPathGroupASPathName TASPathName } tRPAdminASPathGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminASPathGroupName specifies the name of the AS-Path Group." ::= { tRPAdminASPathGroupEntry 1 } tRPAdminASPathGroupEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminASPathGroupEntryIndex specifies the index of the entry in the AS-Path Group." ::= { tRPAdminASPathGroupEntry 2 } tRPAdminASPathGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminASPathGroupRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperASPathGroupTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperASPathGroupTable." ::= { tRPAdminASPathGroupEntry 3 } tRPAdminASPathGroupASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminASPathGroupASPathName specifies the name of the AS-Path from the tRPAdminASPathTable." ::= { tRPAdminASPathGroupEntry 4 } -- -- Conformance Information -- tmnxRoutePolicyCompliances OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 1 } tmnxRoutePolicyGroups OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 2 } -- compliance statements -- tmnxRoutePolicyCompliance MODULE-COMPLIANCE -- ::= { tmnxRoutePolicyCompliances 1 } -- tmnxRoutePolicyR2r1Compliance MODULE-COMPLIANCE -- ::= { tmnxRoutePolicyCompliances 2 } tmnxRoutePolicy7450V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 4.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, -- tmnxRPASPathObjectsGroup, -- tmnxRPCommunityObjectsGroup, -- tmnxRPDampingObjectsGroup, -- tmnxRPPrefixListObjectsGroup, tmnxRPPolicyObjectsV4v0Group, tmnxRPPolicyEntryObjectsV4v0Group -- tmnxRPInetPrefixListObjectsGroup } ::= { tmnxRoutePolicyCompliances 3 } tmnxRoutePolicy7750V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 4.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsGroup, tmnxRPCommunityObjectsGroup, tmnxRPDampingObjectsGroup, tmnxRPPrefixListObjectsGroup, tmnxRPPolicyObjectsV4v0Group, tmnxRPPolicyEntryObjectsV4v0Group, tmnxRPInetPrefixListObjectsGroup } ::= { tmnxRoutePolicyCompliances 4 } tmnxRoutePolicy7450V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 5.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, -- tmnxRPASPathObjectsV5v0Group, -- tmnxRPCommunityObjectsV5v0Group, -- tmnxRPDampingObjectsV5v0Group, -- tmnxRPPrefixListObjectsV5v0Group, tmnxRPPolicyObjectsV5v0Group, tmnxRPPolicyEntryObjectsV5v0Group, -- tmnxRPInetPrefixListObjectsV5v0Group tmnxRPPolicyObsoleteV5v0Group } ::= { tmnxRoutePolicyCompliances 5 } tmnxRoutePolicy7750V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 5.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPPolicyObjectsV5v0Group, tmnxRPPolicyEntryObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group } ::= { tmnxRoutePolicyCompliances 6 } tmnxRoutePolicy7450V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 5.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, -- tmnxRPASPathObjectsV5v0Group, -- tmnxRPCommunityObjectsV5v0Group, -- tmnxRPDampingObjectsV5v0Group, -- tmnxRPPrefixListObjectsV5v0Group, -- tmnxRPInetPrefixListObjectsV5v0Group tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 7 } tmnxRoutePolicy7750V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 5.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 8 } tmnxRoutePolicy7450V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 5.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, -- tmnxRPASPathObjectsV5v0Group, -- tmnxRPCommunityObjectsV5v0Group, -- tmnxRPDampingObjectsV5v0Group, -- tmnxRPPrefixListObjectsV5v0Group, -- tmnxRPInetPrefixListObjectsV5v0Group tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 9 } tmnxRoutePolicy7750V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 5.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 10 } tmnxRoutePolicy7450V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 9.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, -- tmnxRPASPathObjectsV5v0Group, -- tmnxRPCommunityObjectsV5v0Group, -- tmnxRPDampingObjectsV5v0Group, -- tmnxRPPrefixListObjectsV5v0Group, -- tmnxRPInetPrefixListObjectsV5v0Group tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group } ::= { tmnxRoutePolicyCompliances 11 } tmnxRoutePolicy7750V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 9.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group } ::= { tmnxRoutePolicyCompliances 12 } tmnxRtPolicy7450V10v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7450 ESS series systems 10.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV10v0Group } ::= { tmnxRoutePolicyCompliances 13 } tmnxRtPolicy7750V10v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement supporting management of Route Policies on Alcatel-Lucent 7750 SR series systems 10.0 release." MODULE -- this module MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV10v0Group } ::= { tmnxRoutePolicyCompliances 14 } -- units of conformance tmnxRPAdminControlObjectsGroup OBJECT-GROUP OBJECTS { tRPAdminOwner, tRPAdminControlApply, tRPAdminLastSetTimer, tRPAdminLastSetTimeout } STATUS current DESCRIPTION "The group of objects supporting management of transactions applying changed Administrative values to the Operational Route Policy database on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 1 } tmnxRPASPathObjectsGroup OBJECT-GROUP OBJECTS { tRPOperASPathTableLastChanged, tRPOperASPathRowStatus, tRPOperASPathRegEx, tRPOperASPathEntryLastChanged, tRPAdminASPathRowStatus, tRPAdminASPathRegEx } STATUS obsolete DESCRIPTION "The group of objects supporting management of AS Paths on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 2 } tmnxRPCommunityObjectsGroup OBJECT-GROUP OBJECTS { tRPOperCommunityTableLastChanged, tRPOperCommunityRowStatus, tRPOperCommunityEntryLastChanged, tRPAdminCommunityRowStatus } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy communities on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 3 } tmnxRPDampingObjectsGroup OBJECT-GROUP OBJECTS { tRPOperDampingTableLastChanged, tRPOperDampingRowStatus, tRPOperDampingHalfLife, tRPOperDampingMaxSuppress, tRPOperDampingReuse, tRPOperDampingSuppress, tRPOperDampingEntryLastChanged, tRPAdminDampingRowStatus, tRPAdminDampingHalfLife, tRPAdminDampingMaxSuppress, tRPAdminDampingReuse, tRPAdminDampingSuppress } STATUS obsolete DESCRIPTION "The group of objects supporting management route policy damping on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 4 } tmnxRPPrefixListObjectsGroup OBJECT-GROUP OBJECTS { tRPOperPrefixListTableLastChanged, tRPOperPrefixListRowStatus, tRPOperPrefixListThroughLength, tRPOperPrefixListEntryLastChanged, tRPOperPrefixListBeginLength, tRPAdminPrefixListRowStatus, tRPAdminPrefixListThroughLength, tRPAdminPrefixListBeginLength } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 5 } -- tmnxRPPolicyObjectsGroup OBJECT-GROUP -- ::= { tmnxRoutePolicyGroups 6 } -- tmnxRPPolicyEntryObjectsGroup OBJECT-GROUP -- ::= { tmnxRoutePolicyGroups 7 } -- tmnxRPPolicyEntryObjectsR2r1Group OBJECT-GROUP -- ::= { tmnxRoutePolicyGroups 8 } tmnxRPPolicyObjectsV4v0Group OBJECT-GROUP OBJECTS { tRPOperPolicyStatementTableLastChanged, tRPOperPolicyStatementRowStatus, tRPOperPolicyStatementDescription, tRPOperPolicyStatementDefaultAction, tRPOperPolicyStatementEntryLastChanged, tRPOperPSDefaultActionParamsTableLastChanged, tRPOperPSDefaultActionASPath, tRPOperPSDefaultActionASPathName, tRPOperPSDefaultActionASPathPrependAS, tRPOperPSDefaultActionASPathPrependCount, tRPOperPSDefaultActionCommunity1, tRPOperPSDefaultActionCommunityName1, tRPOperPSDefaultActionCommunity2, tRPOperPSDefaultActionCommunityName2, tRPOperPSDefaultActionOrigin, tRPOperPSDefaultActionLocalPreferenceSet, tRPOperPSDefaultActionLocalPreference, tRPOperPSDefaultActionMetric, tRPOperPSDefaultActionMetricValue, tRPOperPSDefaultActionPreference, tRPOperPSDefaultActionDamping, tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefaultActionTag, tRPOperPSDefaultActionOspfType, tRPOperPSDefaultActionParamsEntryLastChanged, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPAdminPolicyStatementRowStatus, tRPAdminPolicyStatementDescription, tRPAdminPolicyStatementDefaultAction, tRPAdminPSDefaultActionASPath, tRPAdminPSDefaultActionASPathName, tRPAdminPSDefaultActionASPathPrependAS, tRPAdminPSDefaultActionASPathPrependCount, tRPAdminPSDefaultActionCommunity1, tRPAdminPSDefaultActionCommunityName1, tRPAdminPSDefaultActionCommunity2, tRPAdminPSDefaultActionCommunityName2, tRPAdminPSDefaultActionOrigin, tRPAdminPSDefaultActionLocalPreferenceSet, tRPAdminPSDefaultActionLocalPreference, tRPAdminPSDefaultActionMetric, tRPAdminPSDefaultActionMetricValue, tRPAdminPSDefaultActionPreference, tRPAdminPSDefaultActionDamping, tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefaultActionTag, tRPAdminPSDefaultActionOspfType, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop } STATUS obsolete DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 9 } tmnxRPPolicyEntryObjectsV4v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsTableLastChanged, tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSParamsEntryLastChanged, tRPOperPSAcceptActionParamsTableLastChanged, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependAS, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcceptActionParamsEntryLastChanged, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaTableLastChanged, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaEntryLastChanged, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSFromCriteriaTableLastChanged, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaEntryLastChanged, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependAS, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS series systems 4.0 release." ::= { tmnxRoutePolicyGroups 10 } tmnxRPInetPrefixListObjectsGroup OBJECT-GROUP OBJECTS { tRPOperInetPrefixListTblLastChg, tRPOperInetPrefixListRowStatus, tRPOperInetPrefixListThroughLen, tRPOperInetPrefixListLastChg, tRPOperInetPrefixListBeginLen, tRPAdminInetPrefixListRowStatus, tRPAdminInetPrefixListThroughLen, tRPAdminInetPrefixListBeginLen } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 11 } tmnxRPPolicyEntryObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependAS, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependAS, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS SR series systems 5.0 release." ::= { tmnxRoutePolicyGroups 12 } tmnxRPPolicyObsoleteV5v0Group OBJECT-GROUP OBJECTS { tRPOperASPathTableLastChanged, tRPOperASPathEntryLastChanged, tRPOperCommunityTableLastChanged, tRPOperCommunityEntryLastChanged, tRPOperDampingTableLastChanged, tRPOperDampingEntryLastChanged, tRPOperPrefixListTableLastChanged, tRPOperPrefixListEntryLastChanged, tRPOperPolicyStatementTableLastChanged, tRPOperPolicyStatementEntryLastChanged, tRPOperPSDefaultActionParamsTableLastChanged, tRPOperPSDefaultActionParamsEntryLastChanged, tRPOperPSParamsTableLastChanged, tRPOperPSParamsEntryLastChanged, tRPOperPSAcceptActionParamsTableLastChanged, tRPOperPSAcceptActionParamsEntryLastChanged, tRPOperPSToCriteriaTableLastChanged, tRPOperPSToCriteriaEntryLastChanged, tRPOperPSFromCriteriaTableLastChanged, tRPOperPSFromCriteriaEntryLastChanged, tRPOperInetPrefixListTblLastChg, tRPOperInetPrefixListLastChg } STATUS current DESCRIPTION "The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted." ::= { tmnxRoutePolicyGroups 13 } tmnxRPASPathObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperASPathRowStatus, tRPOperASPathRegEx, tRPAdminASPathRowStatus, tRPAdminASPathRegEx } STATUS current DESCRIPTION "The group of objects supporting management of AS Paths on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 14 } tmnxRPCommunityObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperCommunityRowStatus, tRPAdminCommunityRowStatus } STATUS current DESCRIPTION "The group of objects supporting management of route policy communities on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 15 } tmnxRPDampingObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperDampingRowStatus, tRPOperDampingHalfLife, tRPOperDampingMaxSuppress, tRPOperDampingReuse, tRPOperDampingSuppress, tRPAdminDampingRowStatus, tRPAdminDampingHalfLife, tRPAdminDampingMaxSuppress, tRPAdminDampingReuse, tRPAdminDampingSuppress } STATUS current DESCRIPTION "The group of objects supporting management route policy damping on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 16 } tmnxRPPrefixListObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperPrefixListRowStatus, tRPOperPrefixListThroughLength, tRPOperPrefixListBeginLength, tRPAdminPrefixListRowStatus, tRPAdminPrefixListThroughLength, tRPAdminPrefixListBeginLength } STATUS current DESCRIPTION "The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 17 } tmnxRPPolicyObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperPolicyStatementRowStatus, tRPOperPolicyStatementDescription, tRPOperPolicyStatementDefaultAction, tRPOperPSDefaultActionASPath, tRPOperPSDefaultActionASPathName, tRPOperPSDefaultActionASPathPrependAS, tRPOperPSDefaultActionASPathPrependCount, tRPOperPSDefaultActionCommunity1, tRPOperPSDefaultActionCommunityName1, tRPOperPSDefaultActionCommunity2, tRPOperPSDefaultActionCommunityName2, tRPOperPSDefaultActionOrigin, tRPOperPSDefaultActionLocalPreferenceSet, tRPOperPSDefaultActionLocalPreference, tRPOperPSDefaultActionMetric, tRPOperPSDefaultActionMetricValue, tRPOperPSDefaultActionPreference, tRPOperPSDefaultActionDamping, tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefaultActionTag, tRPOperPSDefaultActionOspfType, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPAdminPolicyStatementRowStatus, tRPAdminPolicyStatementDescription, tRPAdminPolicyStatementDefaultAction, tRPAdminPSDefaultActionASPath, tRPAdminPSDefaultActionASPathName, tRPAdminPSDefaultActionASPathPrependAS, tRPAdminPSDefaultActionASPathPrependCount, tRPAdminPSDefaultActionCommunity1, tRPAdminPSDefaultActionCommunityName1, tRPAdminPSDefaultActionCommunity2, tRPAdminPSDefaultActionCommunityName2, tRPAdminPSDefaultActionOrigin, tRPAdminPSDefaultActionLocalPreferenceSet, tRPAdminPSDefaultActionLocalPreference, tRPAdminPSDefaultActionMetric, tRPAdminPSDefaultActionMetricValue, tRPAdminPSDefaultActionPreference, tRPAdminPSDefaultActionDamping, tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefaultActionTag, tRPAdminPSDefaultActionOspfType, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop } STATUS obsolete DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 18 } tmnxRPInetPrefixListObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperInetPrefixListRowStatus, tRPOperInetPrefixListThroughLen, tRPOperInetPrefixListBeginLen, tRPAdminInetPrefixListRowStatus, tRPAdminInetPrefixListThroughLen, tRPAdminInetPrefixListBeginLen } STATUS current DESCRIPTION "The group of objects supporting management of route policy prefix-lists on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 19 } tmnxRPPolicyObjectsV7v0Group OBJECT-GROUP OBJECTS { tRPOperPolicyStatementRowStatus, tRPOperPolicyStatementDescription, tRPOperPolicyStatementDefaultAction, tRPOperPSDefaultActionASPath, tRPOperPSDefaultActionASPathName, tRPOperPSDefaultActionASPathPrependCount, tRPOperPSDefaultActionCommunity1, tRPOperPSDefaultActionCommunityName1, tRPOperPSDefaultActionCommunity2, tRPOperPSDefaultActionCommunityName2, tRPOperPSDefaultActionOrigin, tRPOperPSDefaultActionLocalPreferenceSet, tRPOperPSDefaultActionLocalPreference, tRPOperPSDefaultActionMetric, tRPOperPSDefaultActionMetricValue, tRPOperPSDefaultActionPreference, tRPOperPSDefaultActionDamping, tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefaultActionTag, tRPOperPSDefaultActionOspfType, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPAdminPolicyStatementRowStatus, tRPAdminPolicyStatementDescription, tRPAdminPolicyStatementDefaultAction, tRPAdminPSDefaultActionASPath, tRPAdminPSDefaultActionASPathName, tRPAdminPSDefaultActionASPathPrependCount, tRPAdminPSDefaultActionCommunity1, tRPAdminPSDefaultActionCommunityName1, tRPAdminPSDefaultActionCommunity2, tRPAdminPSDefaultActionCommunityName2, tRPAdminPSDefaultActionOrigin, tRPAdminPSDefaultActionLocalPreferenceSet, tRPAdminPSDefaultActionLocalPreference, tRPAdminPSDefaultActionMetric, tRPAdminPSDefaultActionMetricValue, tRPAdminPSDefaultActionPreference, tRPAdminPSDefaultActionDamping, tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefaultActionTag, tRPAdminPSDefaultActionOspfType, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop, tRPAdminPSDefaultActionASPathPnd, tRPOperPSDefaultActionASPathPend } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 20 } tmnxRPPolicyEntryObjectsV7v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId, tRPAdminPSAcceptActionASPathPend, tRPOperPSAcceptActionASPathPend, tRPOperPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaMatchTag } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS series systems 7.0 release." ::= { tmnxRoutePolicyGroups 21 } tmnxRPPolicyObsoleteV7v0Group OBJECT-GROUP OBJECTS { tRPAdminPSDefaultActionASPathPrependAS, tRPAdminPSAcceptActionASPathPrependAS, tRPOperPSDefaultActionASPathPrependAS, tRPOperPSAcceptActionASPathPrependAS } STATUS current DESCRIPTION "The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted in Alcatel-Lucent SROS series systems 7.0 release." ::= { tmnxRoutePolicyGroups 22 } tmnxRPPolicyObjectsV8v0Group OBJECT-GROUP OBJECTS { tRPAdminPSDefActMcRedirSvcId, tRPAdminPSDefActMcRedirIfIndex, tRPOperPSDefActMcRedirSvcId, tRPOperPSDefActMcRedirIfIndex } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems that were added in release 8.0." ::= { tmnxRoutePolicyGroups 25 } tmnxRPQPPBV9v0R4Group OBJECT-GROUP OBJECTS { tRPAdminPSAcceptActionFC, tRPAdminPSAcceptActionFCPriority } STATUS current DESCRIPTION "The group of objects supporting QoS policy propagation using BGP in release 9.0R4 Alcatel-Lucent SROS series systems." ::= { tmnxRoutePolicyGroups 26 } tmnxRPPolicyEntryObjectsV9v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId, tRPAdminPSAcceptActionASPathPend, tRPOperPSAcceptActionASPathPend, tRPOperPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaState, tRPOperPSFromCriteriaState } STATUS current DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Alcatel-Lucent SROS SR series systems 9.0 release." ::= { tmnxRoutePolicyGroups 27 } tmnxRPPolicyObjectsV9v0Group OBJECT-GROUP OBJECTS { tRPAdminPSAcptActMcRedirSvcId, tRPAdminPSAcptActMcRedirIfIndex, tRPOperPSAcptActMcRedirSvcId, tRPOperPSAcptActMcRedirIfIndex } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems that were added in release 9.0." ::= { tmnxRoutePolicyGroups 30 } tmnxRPPolicyObjectsV10v0Group OBJECT-GROUP OBJECTS { tRPAdminPSAcptActnMetricSource, tRPAdminPSDefActionMetricSource, tRPOperPSAcptActnMetricSource, tRPOperPSDefActionMetricSource, tRPAdminPSAcptActionAigpMetric, tRPAdminPSAcptActnAigpMetricVal, tRPOperPSAcptActionAigpMetric, tRPOperPSAcptActnAigpMetricVal, tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3, tRPOperCommunityExprString4, tRPOperCommunityExprRowStatus, tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3, tRPAdminCommunityExprString4, tRPAdminCommunityExprRowStatus, tRPAdminPSDefActionAigpMetric, tRPAdminPSDefActnAigpMetricVal, tRPOperPSDefActionAigpMetric, tRPOperPSDefActnAigpMetricVal } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Alcatel-Lucent SROS series systems that were added in release 10.0." ::= { tmnxRoutePolicyGroups 31 } tmnxRPASPathGroupV10v0Group OBJECT-GROUP OBJECTS { tRPOperASPathGroupRowStatus, tRPOperASPathGroupASPathName, tRPAdminASPathGroupRowStatus, tRPAdminASPathGroupASPathName, tRPOperPSFromCritASPathGroup, tRPAdminPSFromCritASPathGroup } STATUS current DESCRIPTION "The group of objects supporting management of AS-Path Groups on Alcatel-Lucent SROS series systems since release 10.0." ::= { tmnxRoutePolicyGroups 32 } END