TIMETRA-MCAST-PATH-MGMT-MIB

All MIBs › TIMETRA-MCAST-PATH-MGMT-MIB

Organization: Alcatel-Lucent

Last Updated: 2011-02-01

Description: TIMETRA-MCAST-PATH-MGMT-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-MCAST-PATH-MGMT-MIB?

TIMETRA-MCAST-PATH-MGMT-MIB is an Alcatel-Lucent/Nokia (Timetra SROS) proprietary enterprise MIB for ingress multicast path bandwidth management policy on SROS-based routers. It defines configuration for multicast bandwidth policies, including admin bandwidth thresholds, multicast pool percentage and reserved committed burst size, slope policy, and fallback percentage-reset behavior. It is primarily a software/traffic-management configuration MIB rather than a hardware-sensor MIB; monitoring it reveals the configured state of multicast bandwidth admission policies and when they were last changed, useful for confirming a policy update took effect and for spotting a misconfigured threshold that could cause multicast admission failures. It is part of Alcatel-Lucent's broader TIMETRA-* enterprise MIB family for SROS multicast/QoS management, used alongside other Timetra multicast and queuing MIBs. It is deployed on Alcatel-Lucent/Nokia SROS routers (7750/7450 series) providing IPTV/multicast services in service-provider networks, and engineers can download the TIMETRA-MCAST-PATH-MGMT-MIB file to load it into their MIB browser for multicast bandwidth-policy monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-MCAST-PATH-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent/Nokia SROS router (7750/7450 series)

Monitoring Examples

An admin polls tmnxMcPathBwPlcyTable/tmnxMcPathBwPlcyEntry objects such as tmnxMcPathBwPlcyAdminBwThd and tmnxMcPathBwPlcyMcPoolPercentTot to verify the configured bandwidth threshold and multicast pool allocation percentage. tmnxMcPathBwPlcyLastChanged and tmnxMcPathBwPlcyTableLastChanged confirm when a policy was last modified, helping verify a recent multicast bandwidth policy change took effect as intended. tmnxMcPathBwPlcyMcPoolResvCbs shows the reserved committed burst size allocated to the pool.

What Can Be Monitored

multicast bandwidth policy thresholds
multicast pool reserved CBS/percentage
slope policy assignment
policy last-changed timestamp

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-CHASSIS-MIB

TmnxChassisIndex
TmnxSlotNum
tmnxCardSlotNum	OBJECT-TYPE
tmnxChassisIndex	OBJECT-TYPE
tmnxMDASlotNum	OBJECT-TYPE

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-TC-MIB

TItemDescription
TNamedItem
TNamedItemOrEmpty
TmnxAdminState
TmnxEnabledDisabled
TmnxEnabledDisabledOrInherit
TmnxVdoAnalyzerAlarm
TmnxVdoFccServerMode
TmnxVdoGrpId
TmnxVdoGrpIdOrInherit
TmnxVdoPortNumber

From TIMETRA-VRTR-MIB

vRtrID

OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using tmnxMcPathOperChlBandwidth OID:

Select an Alcatel-Lucent/Nokia SROS router (7750/7450 series) (ingress multicast bandwidth-policy config status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxMcPathOperChlBandwidth into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxMcPathOperChlBandwidth indicates the multicast channel's channel's current bandwidth in kilo-bits-per-second. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline (in kbps), since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraMcastPathMgmtMIBModule	1.3.6.1.4.1.6527.1.1.3.54			This is the SNMP MIB module for ingress multicast path management policy on Alcatel-Lucent SROS equipment. Copyright 2008-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxMcPathConformance	1.3.6.1.4.1.6527.3.1.1.54
tmnxMcPathCompliances	1.3.6.1.4.1.6527.3.1.1.54.1
tmnxMcPathV6v0Compliance	1.3.6.1.4.1.6527.3.1.1.54.1.1			The compliance statement for management of multicast management policies on version 6.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPath7x50V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.54.1.2			The compliance statement for management of multicast management policies on version 6.1 of the Alcatel-Lucent SROS series systems.
tmnxMcPath7710V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.54.1.3			The compliance statement for management of multicast management policies on version 6.1 of the Alcatel-Lucent 7710 series systems.
tmnxMcPath7x50V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.54.1.4			The compliance statement for management of multicast management policies on version 7.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathV8v0Compliance	1.3.6.1.4.1.6527.3.1.1.54.1.5			The compliance statement for management of multicast management policies on version 8.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathV9v0Compliance	1.3.6.1.4.1.6527.3.1.1.54.1.6			The compliance statement for management of multicast management policies on version 9.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathV10v0Compliance	1.3.6.1.4.1.6527.3.1.1.54.1.7			The compliance statement for management of multicast management policies on version 10.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathGroups	1.3.6.1.4.1.6527.3.1.1.54.2
tmnxMcPathGlobalGroup	1.3.6.1.4.1.6527.3.1.1.54.2.1			The group of objects supporting management of global objects related to multicast path management information on version 6.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathPlcyV6v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.2			The group of objects supporting multicast path management information on version 6.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathBdlV6v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.3			The group of objects supporting multicast path management information for bundles on version 6.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathBdlChlV6v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.4			The group of objects supporting multicast path management information for bundle channels on version 6.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathChlSrcV6v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.5			The group of objects supporting multicast path management information for channel sources which override multicast channel parameters on version 6.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathOperChlV6v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.6			The group of operational objects supporting multicast policy management on version 6.0 of the Alcatel-Lucent SROS series systems
tmnxMcPathNotificationGroup	1.3.6.1.4.1.6527.3.1.1.54.2.7			The group of notifications supporting the multicast policy management on Alcatel-Lucent SROS SR series systems.
tmnxMcPathNotifyObjsGroup	1.3.6.1.4.1.6527.3.1.1.54.2.8			The group of objects used by notifications supporting the multicast policy management on Alcatel-Lucent SROS series systems.
tmnxMcPathGlobalV6v1Group	1.3.6.1.4.1.6527.3.1.1.54.2.9			The group of objects supporting management of global objects related to multicast path management information on version 6.1 of the Alcatel-Lucent SROS series systems.
tmnxMcPathPlcyV6v1Group	1.3.6.1.4.1.6527.3.1.1.54.2.10			The group of objects supporting multicast path management information on version 6.1 of the Alcatel-Lucent SROS series systems.
tmnxMcPathVdoV7v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.11			The group of objects supporting video multicast path management information on version 7.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathTunnelIfV7v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.12			The group of objects supporting tunnel interfaces related to multicast path management information on version 7.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathGlobalV7v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.13			The group of objects supporting management of global objects related to multicast path management information on version 7.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathObsoleteV7v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.14			The group of objects which are obsoleted in version 7.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathGlobalV8v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.15			The group of objects supporting management of global objects related to multicast path management information on version 8.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathVdoV8v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.16			The group of objects supporting video multicast path management information on version 8.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathGlobalExtV6v1Group	1.3.6.1.4.1.6527.3.1.1.54.2.17			The group of objects supporting management of global objects related to multicast path management information on version 6.1 of the Alcatel-Lucent SROS series systems.
tmnxMcPathGlobalV9v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.18			The group of objects supporting management of global objects related to multicast path management information on version 9.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathRprtDestV9v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.19			The group of objects supporting multicast reporting on version 9.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathVdoV9v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.20			The group of objects supporting video multicast path management information on version 9.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathVdoObsoletedV9v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.21			The group of objects obsoleted on version 9.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathSwPlaneGroup	1.3.6.1.4.1.6527.3.1.1.54.2.22			The group of objects supporting multicast policy management switch planes on the Alcatel-Lucent SROS series systems.
tmnxMcPathGlobalV10v0Group	1.3.6.1.4.1.6527.3.1.1.54.2.23			The group of objects supporting management of global objects related to multicast path management information on version 10.0 of the Alcatel-Lucent SROS series systems.
tmnxMcPathObjs	1.3.6.1.4.1.6527.3.1.2.54
tmnxMcPathGlobalObjs	1.3.6.1.4.1.6527.3.1.2.54.1
TIM tmnxMcPathBwPlcyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.54.1.1	TimeStamp	read-only	The value of tmnxMcPathBwPlcyTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathBwPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathPlcyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.54.1.2	TimeStamp	read-only	The value of tmnxMcPathPlcyTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathBdlTableLastChanged	1.3.6.1.4.1.6527.3.1.2.54.1.3	TimeStamp	read-only	The value of tmnxMcPathBdlTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathBdlChlTblLastChanged	1.3.6.1.4.1.6527.3.1.2.54.1.4	TimeStamp	read-only	The value of tmnxMcPathBdlChlTblLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathBwPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathChlSrcTableLastChanged	1.3.6.1.4.1.6527.3.1.2.54.1.5	TimeStamp	read-only	The value of tmnxMcPathChlSrcTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathChlSrcTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMcPathChassisLevelInfo	1.3.6.1.4.1.6527.3.1.2.54.1.6
U32 tmnxMcPathChassisPlaneLimit	1.3.6.1.4.1.6527.3.1.2.54.1.6.1	Unsigned32	read-write	The value of tmnxMcPathChassisPlaneLimit specifies total multicast bandwidth for the chassis forwarding plane. This object was deprecated in the 10.0 release.
U32 tmnxMcPathChassisSecPlaneLimit	1.3.6.1.4.1.6527.3.1.2.54.1.6.2	Unsigned32	read-write	The value of tmnxMcPathChassisSecPlaneLimit specifies multicast bandwidth for secondary paths on the chassis forwarding plane. The value must be less than tmnxMcPathChassisPlaneLimit. This object was deprecated in the 10.0 release.
U32 tmnxMcPathChassisDualPlaneLimit	1.3.6.1.4.1.6527.3.1.2.54.1.6.3	Unsigned32	read-write	The value of tmnxMcPathChassisDualPlaneLimit specifies total multicast bandwidth for the chassis forwarding plane in dual-sfm mode. This object was deprecated in the 10.0 release.
U32 tmnxMcPathChassisDualSecPlaneLmt	1.3.6.1.4.1.6527.3.1.2.54.1.6.4	Unsigned32	read-write	The value of tmnxMcPathChassisDualSecPlaneLmt specifies bandwidth for secondary paths on the chassis forwarding plane in dual-sfm mode. The value must be less than tmnxMcPathChassisDualPlaneLimit. This object was deprecated in the 10.0 release.
T/F tmnxMcPathChassisMmrpAdminMode	1.3.6.1.4.1.6527.3.1.2.54.1.6.5	TruthValue	read-write	The value of tmnxMcPathChassisMmrpAdminMode specifies that Ingress Multicast Path Management (IMPM) does not monitor PIM and IGMP trafic. It monitors only Multiple MAC Registration Protocol (MMRP) trafic. The flag setting can be changed at anytime. The new setting will take effect after reboot or reset of the system.
T/F tmnxMcPathChassisMmrpOperMode	1.3.6.1.4.1.6527.3.1.2.54.1.6.6	TruthValue	read-only	The value of tmnxMcPathChassisMmrpOperMode indicates that Ingress Multicast Path Management (IMPM) does not monitor PIM and IGMP trafic. It monitors only Multiple MAC Registration Protocol (MMRP) trafic. Changing the value of tmnxMcPathChassisMmrpAdminMode will result in tmnxMcPathChassisMmrpAdminMode indicating the new mode while tmnxMcPathChassisMmrpOperMode indicates previous mode until the configuration is saved and the system is rebooted. After the reboot, both tmnxMcPathChassisMmrpAdminMode and tmnxMcPathChassisMmrpOperMode will indicate the new mode.
T/F tmnxMcPathChassisRRInactiveRec	1.3.6.1.4.1.6527.3.1.2.54.1.6.7	TruthValue	read-write	The value of tmnxMcPathChassisRRInactiveRec specifies whether initially inactive multicast records use the IOM default secondary multicast path or not. If the value of tmnxMcPathChassisRRInactiveRec is 'true' the system redistributes newly populated inactive records among all available IOM multicast paths and multicast switch fabric planes. If the value of tmnxMcPathChassisRRInactiveRec is 'false' the system continues to set all initially inactive multicast records to use the IOM default secondary multicast path.
U32 tmnxMcPathChassisPlnLimTotal	1.3.6.1.4.1.6527.3.1.2.54.1.6.8	Unsigned32	read-write	The value of tmnxMcPathChassisPlnLimTotal specifies the total bandwidth of the chassis forwarding plane. A value of 0 indicates the system will auto-detect the applicable bandwidth. The default value is 0 when removable switch-fabric is supported and 2000 otherwise.
U32 tmnxMcPathChassisPlnLimDynTotal	1.3.6.1.4.1.6527.3.1.2.54.1.6.9	Unsigned32	read-only	The value of tmnxMcPathChassisPlnLimDynTotal indicates the total bandwidth of the chassis forwarding plane that is currently in use.
U32 tmnxMcPathChassisPlnLimPriCap	1.3.6.1.4.1.6527.3.1.2.54.1.6.10	Unsigned32	read-write	The value of tmnxMcPathChassisPlnLimPriCap specifies the part of the total chassis forwarding bandwidth that can be used for multicast when not all switch cards are functional. The default value is 8750 when removable switch-fabric is supported and 10000 otherwise.
U32 tmnxMcPathChassisPlnLimSecCap	1.3.6.1.4.1.6527.3.1.2.54.1.6.11	Unsigned32	read-write	The value of tmnxMcPathChassisPlnLimSecCap specifies the part of the total chassis forwarding bandwidth that can be used for multicast secondary paths when not all switch cards are functional. The value must be less than or equal to the value of tmnxMcPathChassisPlnLimPriCap. The default value is 8750 when removable switch-fabric is supported and 9000 otherwise.
U32 tmnxMcPathChassisPlnLimPriCapRed	1.3.6.1.4.1.6527.3.1.2.54.1.6.12	Unsigned32	read-write	The value of tmnxMcPathChassisPlnLimPriCapRed specifies the part of the total chassis forwarding bandwidth that can be used for multicast when all switch cards are functional. The default value is 8750 when removable switch-fabric is supported and 10000 otherwise.
U32 tmnxMcPathChassisPlnLimSecCapRed	1.3.6.1.4.1.6527.3.1.2.54.1.6.13	Unsigned32	read-write	The value of tmnxMcPathChassisPlnLimSecCapRed specifies the part of the total chassis forwarding bandwidth that can be used for multicast secondary paths when all switch cards are functional. The value must be less than or equal to the value of tmnxMcPathChassisPlnLimPriCapRed. The default value is 8750 when removable switch-fabric is supported and 9000 otherwise.
TIM tmnxMcPathVdoPlcyTblLastChanged	1.3.6.1.4.1.6527.3.1.2.54.1.7	TimeStamp	read-only	The value of tmnxMcPathVdoPlcyTblLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathVdoPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathBdlExtTableLastChgd	1.3.6.1.4.1.6527.3.1.2.54.1.8	TimeStamp	read-only	The value of tmnxMcPathBdlExtTableLastChgd indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlExtTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathBdlChlExtTableLastChgd	1.3.6.1.4.1.6527.3.1.2.54.1.9	TimeStamp	read-only	The value of tmnxMcPathBdlChlExtTableLastChgd indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlChlExtTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathChlSrcExtTableLastChgd	1.3.6.1.4.1.6527.3.1.2.54.1.10	TimeStamp	read-only	The value of tmnxMcPathChlSrcExtTableLastChgd indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlExtTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tmnxMcPathRprtDestTblLastChanged	1.3.6.1.4.1.6527.3.1.2.54.1.11	TimeStamp	read-only	The value of tmnxMcPathRprtDestTblLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathRprtDestTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMcPathNotifyObjs	1.3.6.1.4.1.6527.3.1.2.54.2
IPt tmnxMcPathChlGrpAddrType	1.3.6.1.4.1.6527.3.1.2.54.2.1	InetAddressType	accessible-for-notify	The value of tmnxMcPathChlGrpAddrType indicates the address type of tmnxMcPathChlGrpAddr.
IP tmnxMcPathChlGrpAddr	1.3.6.1.4.1.6527.3.1.2.54.2.2	InetAddress	accessible-for-notify	The value of tmnxMcPathChlGrpAddr indicates the group address of the multicast channel. Its type is specified by tmnxMcPathChlGrpAddrType.
IPt tmnxMcPathChlSrcAddrType	1.3.6.1.4.1.6527.3.1.2.54.2.3	InetAddressType	accessible-for-notify	The value of tmnxMcPathChlSrcAddrType indicates the address type of tmnxMcPathChlSrcAddr.
IP tmnxMcPathChlSrcAddr	1.3.6.1.4.1.6527.3.1.2.54.2.4	InetAddress	accessible-for-notify	The value of tmnxMcPathChlSrcAddr indicates the source address of the multicast channel. Its type is specified by tmnxMcPathChlSrcAddrType.
TMN tmnxMcPathChlPathType	1.3.6.1.4.1.6527.3.1.2.54.2.5	TmnxMcPathChlSfPathTypeTc	accessible-for-notify	The value of tmnxMcPathChlPathType indicates the path type for an explicit ingress switch fabric multicast path assigned to a multicast channel.
TMN tmnxMcPathChassisIndex	1.3.6.1.4.1.6527.3.1.2.54.2.6	TmnxChassisIndex	accessible-for-notify	The unique value which identifies this chassis in the system. The first release of the product only supports a single chassis in the system.
TMN tmnxMcPathCardSlotNum	1.3.6.1.4.1.6527.3.1.2.54.2.7	TmnxSlotNum	accessible-for-notify	The unique value which identifies this IOM slot within a chassis in the system.
U32 tmnxMcPathMDASlotNum	1.3.6.1.4.1.6527.3.1.2.54.2.8	Unsigned32	accessible-for-notify	The unique value which identifies this MDA slot within a specific IOM card in the system. Rows with a tmnxMDASlotNum value of zero (0) represent the special case of an IOM card without MDA slots but that instead has its ports directly on the IOM card itself. In that case, there should be only that one row entry in the tmnxMDATable for that IOM card.
TMN tmnxMcPathChlRtrType	1.3.6.1.4.1.6527.3.1.2.54.2.9	TmnxMcPathRtrType	accessible-for-notify	The value of tmnxMcPathChlRtrType specifies the type of virtual router.
tmnxMcPathBwPlcyTable	1.3.6.1.4.1.6527.3.1.2.54.3		not-accessible	The tmnxMcPathBwPlcyTable has an entry for each multicast bandwidth policy configured on this system.
tmnxMcPathBwPlcyEntry	1.3.6.1.4.1.6527.3.1.2.54.3.1		not-accessible	Each row entry represents a particular multicast bandwidth policy. Entries are created/deleted by the user.
TNA tmnxMcPathBwPlcyName	1.3.6.1.4.1.6527.3.1.2.54.3.1.1	TNamedItem	not-accessible	The value of tmnxMcPathBwPlcyName indicates the name of the multicast bandwidth policy.
ROW tmnxMcPathBwPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.54.3.1.2	RowStatus	read-create	The value of tmnxMcPathBwPlcyRowStatus is used for creation/deletion of multicast bandwidth policies.
TIM tmnxMcPathBwPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.54.3.1.3	TimeStamp	read-only	The value of tmnxMcPathBwPlcyLastChanged indicates the timestamp of last change to this row in tmnxMcPathBwPlcyTable.
TIT tmnxMcPathBwPlcyDescription	1.3.6.1.4.1.6527.3.1.2.54.3.1.4	TItemDescription	read-create	The value of tmnxMcPathBwPlcyDescription specifies the textual description of this multicast bandwidth policy.
U32 tmnxMcPathBwPlcyFallPercentReset	1.3.6.1.4.1.6527.3.1.2.54.3.1.5	Unsigned32	read-create	The value of tmnxMcPathBwPlcyFallPercentReset specifies the percentage of bandwidth decrease that must occur to reset the dynamic bandwidth monitoring function for a multicast channel.
U32 tmnxMcPathBwPlcyAdminBwThd	1.3.6.1.4.1.6527.3.1.2.54.3.1.6	Unsigned32	read-create	The value of tmnxMcPathBwPlcyAdminBwThd specifies at which bandwidth rate a multicast channel configured to use an administrative rate will start and stop using that rate as the in-use ingress bandwidth when managing ingress multicast paths.
U32 tmnxMcPathBwPlcyMcPoolPercentTot	1.3.6.1.4.1.6527.3.1.2.54.3.1.7	Unsigned32	read-create	The value of tmnxMcPathBwPlcyMcPoolPercentTot specifies how much of the total ingress buffer pool space for the MDA (Media Dependent Adapter) is dedicated for multicast channels managed by the bandwidth policy.
U32 tmnxMcPathBwPlcyMcPoolResvCbs	1.3.6.1.4.1.6527.3.1.2.54.3.1.8	Unsigned32	read-create	The value of tmnxMcPathBwPlcyMcPoolResvCbs specifies the percentage of the pool that will be reserved for multicast path queues within their Committed Buffer Size (CBS) threshold.
TNA tmnxMcPathBwPlcyMcPoolSlopePlcy	1.3.6.1.4.1.6527.3.1.2.54.3.1.9	TNamedItem	read-create	The value of tmnxMcPathBwPlcyMcPoolSlopePlcy specifies the named policy which will be used to configure the WRED (Weighted Random Early Discard) slopes within the multicast pool. Once a slope policy is associated with a buffer pool, it cannot be deleted.
tmnxMcPathBwPlcyPathTable	1.3.6.1.4.1.6527.3.1.2.54.4		not-accessible	The tmnxMcPathBwPlcyPathTable has an entry for each of the three ingress multicast paths into the switch fabric. An entry is created in this table whenever a entry for a bandwidth policy is created in tmnxMcPathBwPlcyTable.
tmnxMcPathBwPlcyPathEntry	1.3.6.1.4.1.6527.3.1.2.54.4.1		not-accessible	Each row entry represents a particular ingress multicast path.
TMN tmnxMcPathBwPlcyPathType	1.3.6.1.4.1.6527.3.1.2.54.4.1.1	TmnxMcPathChlSfPathTypeTc	not-accessible	The value of tmnxMcPathBwPlcyPathType specifies the type of the path.
U32 tmnxMcPathBwPlcyPathLimit	1.3.6.1.4.1.6527.3.1.2.54.4.1.2	Unsigned32	read-create	The value of tmnxMcPathBwPlcyPathLimit overrides the default path limit for each of the three ingress multicast paths into the switch fabric. The default value of tmnxMcPathBwPlcyPathLimit is the default value of path limit for the primary path. The default value of tmnxMcPathBwPlcyPathLimit for the secondary and ancillary path is 1500 and 5000 respectively.
U32 tmnxMcPathBwPlcyPathCbs	1.3.6.1.4.1.6527.3.1.2.54.4.1.3	Unsigned32	read-create	The value of tmnxMcPathBwPlcyPathCbs overrides the default CBS for each individual path's queue. The default value of tmnxMcPathBwPlcyPathCbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyPathCbs for the secondary and ancillary path is 3000 and 6500 respectively.
U32 tmnxMcPathBwPlcyPathMbs	1.3.6.1.4.1.6527.3.1.2.54.4.1.4	Unsigned32	read-create	The value of tmnxMcPathBwPlcyPathMbs overrides the default Maximum Buffer Size(MBS) for each individual path's queue. The default value of tmnxMcPathBwPlcyPathMbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyPathMbs for the secondary and ancillary path is 4000 and 8000 respectively.
U32 tmnxMcPathBwPlcyPathHighPrio	1.3.6.1.4.1.6527.3.1.2.54.4.1.5	Unsigned32	read-create	The value of tmnxMcPathBwPlcyPathHighPrio overrides the default percentage value used to determine the low priority MBS value for the queue. By default, 10 percent of the queue depth is reserved for high congestion priority traffic and this default value is same for secondary and ancillary paths also.
tmnxMcPathPlcyTable	1.3.6.1.4.1.6527.3.1.2.54.5		not-accessible	The tmnxMcPathPlcyTable has an entry for each multicast information policy configured on this system.
tmnxMcPathPlcyEntry	1.3.6.1.4.1.6527.3.1.2.54.5.1		not-accessible	Each row entry represents a particular multicast information policy. Entries are created/deleted by the user.
TNA tmnxMcPathPlcyName	1.3.6.1.4.1.6527.3.1.2.54.5.1.1	TNamedItem	not-accessible	The value of tmnxMcPathPlcyName indicates the name of the multicast information policy.
ROW tmnxMcPathPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.54.5.1.2	RowStatus	read-create	The value of tmnxMcPathPlcyRowStatus is used for creation/deletion of multicast information policies.
TIM tmnxMcPathPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.54.5.1.3	TimeStamp	read-only	The value of tmnxMcPathPlcyLastChanged indicates the timestamp of last change to this row in tmnxMcPathPlcyTable.
TIT tmnxMcPathPlcyDescription	1.3.6.1.4.1.6527.3.1.2.54.5.1.4	TItemDescription	read-create	The value of tmnxMcPathPlcyDescription specifies the textual description of this multicast information policy.
tmnxMcPathBdlTable	1.3.6.1.4.1.6527.3.1.2.54.7		not-accessible	The tmnxMcPathBdlTable has an entry for each multicast information policy bundle configured on this system.
tmnxMcPathBdlEntry	1.3.6.1.4.1.6527.3.1.2.54.7.1		not-accessible	Each row entry represents a particular multicast information policy bundle. Entries are created/deleted by the user.
TNA tmnxMcPathBdlName	1.3.6.1.4.1.6527.3.1.2.54.7.1.1	TNamedItem	not-accessible	The value of tmnxMcPathBdlName indicates the name of the multicast information policy bundle.
ROW tmnxMcPathBdlStatus	1.3.6.1.4.1.6527.3.1.2.54.7.1.2	RowStatus	read-create	The value of tmnxMcPathBdlStatus along with value of tmnxMcPathPlcyName is used for creation of multicast information policy bundle.
TIM tmnxMcPathBdlLastChanged	1.3.6.1.4.1.6527.3.1.2.54.7.1.3	TimeStamp	read-only	The value of tmnxMcPathBdlLastChanged indicates the timestamp of last change to this row in tmnxMcPathBdlTable.
TIT tmnxMcPathBdlDescription	1.3.6.1.4.1.6527.3.1.2.54.7.1.4	TItemDescription	read-create	The value of tmnxMcPathBdlDescription specifies the textual description of this multicast information policy bundle.
U32 tmnxMcPathBdlCongPriorityThd	1.3.6.1.4.1.6527.3.1.2.54.7.1.5	Unsigned32	read-create	The value of tmnxMcPathBdlCongPriorityThd specifies the preference level threshold where records change from low congestion priority to high congestion priority.
U32 tmnxMcPathBdlEcmpOptThd	1.3.6.1.4.1.6527.3.1.2.54.7.1.6	Unsigned32	read-create	The value of tmnxMcPathBdlEcmpOptThd specifies the preference level threshold where multicast ECMP path management is allowed to dynamically optimize channels based on topology or bandwidth events.
U32 tmnxMcPathBdlDefChlAdminBw	1.3.6.1.4.1.6527.3.1.2.54.7.1.7	Unsigned32	read-create	The value of tmnxMcPathBdlDefChlAdminBw specifies the multicast channel's administrative bandwidth in kilo-bits per second(kbps).
U32 tmnxMcPathBdlDefChlPref	1.3.6.1.4.1.6527.3.1.2.54.7.1.8	Unsigned32	read-create	The value of tmnxMcPathBdlDefChlPref specifies the relative preference level for multicast channels. The preference of a channel specifies its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
TMN tmnxMcPathBdlDefChlBwActivity	1.3.6.1.4.1.6527.3.1.2.54.7.1.10	TmnxMcPathBwActivityTc	read-create	The value of tmnxMcPathBdlDefChlBwActivity specifies how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel. This object can have value 'use-admin-bw' only if tmnxMcPathBdlDefChlAdminBw is non-zero.
U32 tmnxMcPathBdlDefChlBwFallDelay	1.3.6.1.4.1.6527.3.1.2.54.7.1.11	Unsigned32	read-create	The value of tmnxMcPathBdlDefChlBwFallDelay specifies the value the bandwidth manager uses the falling-delay threshold to hold on to the previous highest bandwidth until the delay time has expired while operating in dynamic bandwidth mode. This allows the bandwidth manager to ignore momentary drops in channel bandwidth. This value can only be set if tmnxMcPathBdlDefChlBwActivity is not set to 'none'.
U32 tmnxMcPathBdlDefChlBwBlackHoleRt	1.3.6.1.4.1.6527.3.1.2.54.7.1.12	Unsigned32	read-create	The value of tmnxMcPathBdlDefChlBwBlackHoleRt specifies at which current rate a channel should be placed in the black-hole state. This value can only be set if tmnxMcPathBdlDefChlBwActivity is not set to 'none'.
TMN tmnxMcPathBdlDefChlExSfPath	1.3.6.1.4.1.6527.3.1.2.54.7.1.13	TmnxMcPathChlSfPathTypeTc	read-create	The value of tmnxMcPathBdlDefChlExSfPath specifies an explicit ingress switch fabric multicast path assigned to a multicast channel.
TMN tmnxMcPathBdlVdoFCCState	1.3.6.1.4.1.6527.3.1.2.54.7.1.14	TmnxEnabledDisabled	read-create	The value of tmnxMcPathBdlVdoFCCState indicates whether or not Fast Channel Change (FCC) server is enabled on this multicast information policy bundle.
TMN tmnxMcPathBdlVdoRTState	1.3.6.1.4.1.6527.3.1.2.54.7.1.15	TmnxEnabledDisabled	read-create	The value of tmnxMcPathBdlVdoRTState indicates whether or not Retransmission (RT) Server is enabled on this multicast information policy bundle.
TMN tmnxMcPathBdlVdoChlType	1.3.6.1.4.1.6527.3.1.2.54.7.1.16	TmnxMcPathVdoChlType	read-create	The value of tmnxMcPathBdlVdoChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP).
IPt tmnxMcPathBdlVdoRTAddrType	1.3.6.1.4.1.6527.3.1.2.54.7.1.17	InetAddressType	read-create	The value of tmnxMcPathBdlVdoRTAddrType specifies the address type of tmnxMcPathBdlVdoRTAddress.
IP tmnxMcPathBdlVdoRTAddress	1.3.6.1.4.1.6527.3.1.2.54.7.1.18	InetAddress	read-create	The value of tmnxMcPathBdlVdoRTAddress specifies the IP address of the Retransmission (RT) server.
TMN tmnxMcPathBdlVdoRTPort	1.3.6.1.4.1.6527.3.1.2.54.7.1.19	TmnxVdoPortNumber	read-create	The value of tmnxMcPathBdlVdoRTPort specifies the port of the Retransmission (RT) server.
TMN tmnxMcPathBdlVdoRTBufferSize	1.3.6.1.4.1.6527.3.1.2.54.7.1.20	TmnxMcPathVdoBufferSize	read-create	The value of tmnxMcPathBdlVdoRTBufferSize specifies the number of milliseconds worth of channel packets to store for the Retransmission (RT) server.
TMN tmnxMcPathBdlVdoLocalRTPort	1.3.6.1.4.1.6527.3.1.2.54.7.1.21	TmnxVdoPortNumber	read-create	The value of tmnxMcPathBdlVdoLocalRTPort specifies the local port on which Retransmission (RT) requests are received. The value of this object can only be set for the default bundle and will be used by all bundles and channels.
TMN tmnxMcPathBdlVdoLocalFccPort	1.3.6.1.4.1.6527.3.1.2.54.7.1.22	TmnxVdoPortNumber	read-create	The value of tmnxMcPathBdlVdoLocalFccPort specifies the local port on which Fast Channel Change (FCC) requests are received. The value of this object can only be set for the default bundle and will be used by all bundles and channels.
TMN tmnxMcPathBdlVdoGroupId	1.3.6.1.4.1.6527.3.1.2.54.7.1.23	TmnxVdoGrpId	read-create	The value of tmnxMcPathBdlVdoGroupId specifies the row index in the TIMETRA-VIDEO-MIB::tmnxVdoGrpTable for the video group information for this multicast information policy bundle. A value '0' indicates that no video-group is assigned to this multicast information policy bundle.
TNA tmnxMcPathBdlTunnelIfLspName	1.3.6.1.4.1.6527.3.1.2.54.7.1.24	TNamedItemOrEmpty	read-create	The value of tmnxMcPathBdlTunnelIfLspName specifies the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface.
IPt tmnxMcPathBdlTunIfSdAddrType	1.3.6.1.4.1.6527.3.1.2.54.7.1.25	InetAddressType	read-create	The value of tmnxMcPathBdlTunIfSdAddrType specifies the type for tmnxMcPathBdlTunIfSdAddr.
IP tmnxMcPathBdlTunIfSdAddr	1.3.6.1.4.1.6527.3.1.2.54.7.1.26	InetAddress	read-create	The value of tmnxMcPathBdlTunIfSdAddr specifies the sender IP address of the ingress LER.
TMN tmnxMcPathBdlVdoSourcePort	1.3.6.1.4.1.6527.3.1.2.54.7.1.27	TmnxVdoPortNumber	read-create	The value of tmnxMcPathBdlVdoSourcePort specifies the UDP source port to be used in upstream retransmission (RT) requests. The value of this object can only be set for the default bundle and will be used by all bundles and channels. This object was obsoleted from release 7.0R4.
TMN tmnxMcPathBdlVdoLocalRTState	1.3.6.1.4.1.6527.3.1.2.54.7.1.28	TmnxEnabledDisabled	read-create	The value of tmnxMcPathBdlVdoLocalRTState specifies whether or not local Retransmission (RT) Server is enabled on this multicast information policy bundle.
TMN tmnxMcPathBdlVdoReorderAudio	1.3.6.1.4.1.6527.3.1.2.54.7.1.29	TmnxMcPathVdoReorderAudio	read-create	The value of tmnxMcPathBdlVdoReorderAudio specifies the time, in milliseconds, by which the audio packets are reordered in the ad stream. If the value of this object is set to '0', then audio reordering is disabled.
TMN tmnxMcPathBdlVdoFccMinDuration	1.3.6.1.4.1.6527.3.1.2.54.7.1.30	TmnxMcPathVdoFccMinDuration	read-create	The value of tmnxMcPathBdlVdoFccMinDuration specifies the minimum time duration, in milliseconds, of the Fast Channel Change (FCC) burst. The value of this object determines the starting point of the FCC burst. If the current Group of Pictures (GOP) has less than the minimum duration worth of data, FCC burst begins from the previous GOP.
TMN tmnxMcPathBdlKAOverrideTimer	1.3.6.1.4.1.6527.3.1.2.54.7.1.31	TmnxMcPathKeepAliveOverrideTimer	read-create	The value of tmnxMcPathBdlKAOverrideTimer specifies the time, in seconds, used to override the keep alive timer for all (S,G) entries that fall under this bundle except for (S,G) entries where Keep Alive Timer Override is also configured under channel or source-override. If the value of this object is set to '0', then Keep Alive Timer Override for the bundle is disabled.
U32 tmnxMcPathBdlP2MPId	1.3.6.1.4.1.6527.3.1.2.54.7.1.32	Unsigned32	read-create	The value of tmnxMcPathBdlP2MPId specifies the identifier of a Point to Multipoint (P2MP) Label Switch Path (LSP) associated with this tunnel interface.
T/F tmnxMcPathBdlVdoAnalyzer	1.3.6.1.4.1.6527.3.1.2.54.7.1.33	TruthValue	read-create	The value of tmnxMcPathBdlVdoAnalyzer specifies whether or not the analyzer is enabled for video.
TIT tmnxMcPathBdlVdoAnalyzerDesc	1.3.6.1.4.1.6527.3.1.2.54.7.1.34	TItemDescription	read-create	The value of tmnxMcPathBdlVdoAnalyzerDesc specifies the description for the video analyzer.
IPt tmnxMcPathBdlVdoStrSelSrc1Type	1.3.6.1.4.1.6527.3.1.2.54.7.1.35	InetAddressType	read-create	The value of tmnxMcPathBdlVdoStrSelSrc1Type specifies the address type of tmnxMcPathBdlVdoStrSelSrc1.
IP tmnxMcPathBdlVdoStrSelSrc1	1.3.6.1.4.1.6527.3.1.2.54.7.1.36	InetAddress	read-create	The value of tmnxMcPathBdlVdoStrSelSrc1 specifies the address of the first source in stream selection.
TNA tmnxMcPathBdlVdoStrSelIntf1	1.3.6.1.4.1.6527.3.1.2.54.7.1.37	TNamedItemOrEmpty	read-create	The value of tmnxMcPathBdlVdoStrSelIntf1 specifies the interface on which multicast traffic from 'tmnxMcPathBdlVdoStrSelSrc1' arrives.
IPt tmnxMcPathBdlVdoStrSelSrc2Type	1.3.6.1.4.1.6527.3.1.2.54.7.1.38	InetAddressType	read-create	The value of tmnxMcPathBdlVdoStrSelSrc2Type specifies the address type of tmnxMcPathBdlVdoStrSelSrc2.
IP tmnxMcPathBdlVdoStrSelSrc2	1.3.6.1.4.1.6527.3.1.2.54.7.1.39	InetAddress	read-create	The value of tmnxMcPathBdlVdoStrSelSrc2 specifies the address of the second source in stream selection.
TNA tmnxMcPathBdlVdoStrSelIntf2	1.3.6.1.4.1.6527.3.1.2.54.7.1.40	TNamedItemOrEmpty	read-create	The value of tmnxMcPathBdlVdoStrSelIntf2 specifies the interface on which multicast traffic from 'tmnxMcPathBdlVdoStrSelSrc2' arrives.
tmnxMcPathBdlChlTable	1.3.6.1.4.1.6527.3.1.2.54.9		not-accessible	The tmnxMcPathBdlChlTable has an entry for each multicast information policy bundle channel configured on this system.
tmnxMcPathBdlChlEntry	1.3.6.1.4.1.6527.3.1.2.54.9.1		not-accessible	Each row entry represents a particular multicast information policy bundle channel. Entries are created/deleted by the user.
IPt tmnxMcPathBdlChlStartAddrType	1.3.6.1.4.1.6527.3.1.2.54.9.1.1	InetAddressType	not-accessible	The value of tmnxMcPathBdlChlStartAddrType indicates the address type of tmnxMcPathBdlChlStartAddr.
IP tmnxMcPathBdlChlStartAddr	1.3.6.1.4.1.6527.3.1.2.54.9.1.2	InetAddress	not-accessible	The value of tmnxMcPathBdlChlStartAddr indicates the start address of the multicast channel. Its type is specified by tmnxMcPathBdlChlStartAddrType.
IPt tmnxMcPathBdlChlEndAddrType	1.3.6.1.4.1.6527.3.1.2.54.9.1.3	InetAddressType	not-accessible	The value of tmnxMcPathBdlChlEndAddrType indicates the address type of tmnxMcPathBdlChlEndAddr.
IP tmnxMcPathBdlChlEndAddr	1.3.6.1.4.1.6527.3.1.2.54.9.1.4	InetAddress	not-accessible	The value of tmnxMcPathBdlChlEndAddr indicates the end address of the multicast channel. Its type is specified by tmnxMcPathBdlChlEndAddrType. The value of tmnxMcPathBdlChlEndAddr should always be greater than or equal to tmnxMcPathBdlChlStartAddr.
ROW tmnxMcPathBdlChlRowStatus	1.3.6.1.4.1.6527.3.1.2.54.9.1.5	RowStatus	read-create	The value of tmnxMcPathBdlChlRowStatus is used for creation/deletion of multicast channel in an information policy bundle.
TIM tmnxMcPathBdlChlLastChanged	1.3.6.1.4.1.6527.3.1.2.54.9.1.6	TimeStamp	read-only	The value of tmnxMcPathBdlChlLastChanged indicates the timestamp of last change to this row in tmnxMcPathBdlChlTable.
U32 tmnxMcPathBdlChlAdminBw	1.3.6.1.4.1.6527.3.1.2.54.9.1.7	Unsigned32	read-create	The value of tmnxMcPathBdlChlAdminBw specifies the multicast channel's administrative bandwidth in kilo-bits per second(kbps).
U32 tmnxMcPathBdlChlPref	1.3.6.1.4.1.6527.3.1.2.54.9.1.8	Unsigned32	read-create	The value of tmnxMcPathBdlChlPref specifies specifies the relative preference level for multicast channels. tmnxMcPathBdlChlPref specifies its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
TMN tmnxMcPathBdlChlBwActivity	1.3.6.1.4.1.6527.3.1.2.54.9.1.10	TmnxMcPathBwActivityTc	read-create	The value of tmnxMcPathBdlChlBwActivity specifies how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel. This object can have value 'use-admin-bw' only if tmnxMcPathBdlChlAdminBw is non-zero.
U32 tmnxMcPathBdlChlBwFallDelay	1.3.6.1.4.1.6527.3.1.2.54.9.1.11	Unsigned32	read-create	The value of tmnxMcPathBdlChlBwFallDelay specifies the value the bandwidth manager uses the falling-delay threshold to hold on to the previous highest bandwidth until the delay time has expired while operating in dynamic bandwidth mode. This allows the bandwidth manager ignore momentary drops in channel bandwidth. This value can only be set if tmnxMcPathBdlChlBwActivity is not set to 'none'. The default value of '0' means that there is no channel override and tmnxMcPathBdlDefChlBwFallDelay should be used.
U32 tmnxMcPathBdlChlBwBlackHoleRt	1.3.6.1.4.1.6527.3.1.2.54.9.1.12	Unsigned32	read-create	The value of tmnxMcPathBdlChlBwBlackHoleRt specifies at which current rate a channel should be placed in the black-hole state. This value can only be set if tmnxMcPathBdlChlBwActivity is not set to 'none'.
TMN tmnxMcPathBdlChlExSfPath	1.3.6.1.4.1.6527.3.1.2.54.9.1.13	TmnxMcPathChlSfPathTypeTc	read-create	The value of tmnxMcPathBdlChlExSfPath specifies an explicit ingress switch fabric multicast path assigned to a multicast channel.
TMN tmnxMcPathBdlChlVdoFCCState	1.3.6.1.4.1.6527.3.1.2.54.9.1.14	TmnxEnabledDisabledOrInherit	read-create	The value of tmnxMcPathBdlChlVdoFCCState specifies the state of Fast Channel Change (FCC) server on this multicast channel. When this object has a value of 'enabled', FCC server is enabled. When its value is 'disabled', FCC server is disabled. When its value is 'inherit', state of FCC server is inherited from the value of tmnxMcPathBdlVdoFCCState which specifies the state of FCC server at the bundle level.
TMN tmnxMcPathBdlChlVdoRTState	1.3.6.1.4.1.6527.3.1.2.54.9.1.15	TmnxEnabledDisabledOrInherit	read-create	The value of tmnxMcPathBdlChlVdoRTState specifies the state of Retransmission (RT) Server on this multicast channel. When this object has a value of 'enabled', RT server is enabled. When its value is 'disabled', RT server is disabled. When its value is 'inherit', state of RT server is inherited from the value of tmnxMcPathBdlVdoRTState which specifies the state of RT server at the bundle level.
TMN tmnxMcPathBdlChlVdoChlType	1.3.6.1.4.1.6527.3.1.2.54.9.1.16	TmnxMcPathVdoChlTypeOrInherit	read-create	The value of tmnxMcPathBdlChlVdoChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP). When this object has a value of 'inherit', video channel type is inherited from the value of tmnxMcPathBdlVdoChlType which specifies the video channel type at bundle level.
IPt tmnxMcPathBdlChlVdoRTAddrType	1.3.6.1.4.1.6527.3.1.2.54.9.1.17	InetAddressType	read-create	The value of tmnxMcPathBdlChlVdoRTAddrType specifies the address type of tmnxMcPathBdlChlVdoRTAddress.
IP tmnxMcPathBdlChlVdoRTAddress	1.3.6.1.4.1.6527.3.1.2.54.9.1.18	InetAddress	read-create	The value of tmnxMcPathBdlChlVdoRTAddress specifies the IP address of the Retransmission (RT) server.
TMN tmnxMcPathBdlChlVdoRTPort	1.3.6.1.4.1.6527.3.1.2.54.9.1.19	TmnxVdoPortNumber	read-create	The value of tmnxMcPathBdlChlVdoRTPort specifies the port of the Retransmission (RT) server.
TMN tmnxMcPathBdlChlVdoRTBufferSize	1.3.6.1.4.1.6527.3.1.2.54.9.1.20	TmnxMcPathVdoBufferSize	read-create	The value of tmnxMcPathBdlChlVdoRTBufferSize specifies the number of milliseconds worth of channel packets to store for the Retransmission (RT) server.
TMN tmnxMcPathBdlChlVdoLocalRTPort	1.3.6.1.4.1.6527.3.1.2.54.9.1.21	TmnxVdoPortNumber	read-create	The value of tmnxMcPathBdlChlVdoLocalRTPort specifies the local port on which Retransmission (RT) requests are received. The value of this object can only be set for the default bundle and will be used by all channels. This object was obsoleted from release 7.0R4.
TMN tmnxMcPathBdlChlVdoLocalFccPort	1.3.6.1.4.1.6527.3.1.2.54.9.1.22	TmnxVdoPortNumber	read-create	The value of tmnxMcPathBdlChlVdoLocalFccPort specifies the local port on which Fast Channel Change (FCC) requests are received. The value of this object can only be set for the default bundle and will be used by all channels. This object was obsoleted from release 7.0R4.
TMN tmnxMcPathBdlChlVdoGroupId	1.3.6.1.4.1.6527.3.1.2.54.9.1.23	TmnxVdoGrpIdOrInherit	read-create	The value of tmnxMcPathBdlChlVdoGroupId specifies the row index in the TIMETRA-VIDEO-MIB::tmnxVdoGrpTable for the video group information for this multicast information policy bundle. A value '0' indicates that no video-group is assigned to this multicast channel. A value of '-1' indicates that video-group information is inherited from the value of tmnxMcPathBdlVdoGroupId which specifies the video-group information at the bundle level.
TNA tmnxMcPathBdlChlTunnelIfLspName	1.3.6.1.4.1.6527.3.1.2.54.9.1.24	TNamedItemOrEmpty	read-create	The value of tmnxMcPathBdlChlTunnelIfLspName specifies the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface.
IPt tmnxMcPathBdlChlTunIfSdAddrType	1.3.6.1.4.1.6527.3.1.2.54.9.1.25	InetAddressType	read-create	The value of tmnxMcPathBdlChlTunIfSdAddrType specifies the type for tmnxMcPathBdlChlTunIfSdAddr.
IP tmnxMcPathBdlChlTunIfSdAddr	1.3.6.1.4.1.6527.3.1.2.54.9.1.26	InetAddress	read-create	The value of tmnxMcPathBdlChlTunIfSdAddr specifies the sender address.
TMN tmnxMcPathBdlChlVdoLocalRTState	1.3.6.1.4.1.6527.3.1.2.54.9.1.27	TmnxEnabledDisabledOrInherit	read-create	The value of tmnxMcPathBdlChlVdoLocalRTState specifies the state of local Retransmission (RT) Server on this multicast channel. When this object has a value of 'enabled', local RT server is enabled. When its value is 'disabled', local RT server is disabled. When its value is 'inherit', state of local RT server is inherited from the value of tmnxMcPathBdlVdoLocalRTState which specifies the state of local RT server at the bundle level.
TMN tmnxMcPathBdlChlVdoReorderAudio	1.3.6.1.4.1.6527.3.1.2.54.9.1.28	TmnxMcPathVdoReorderAudio	read-create	The value of tmnxMcPathBdlChlVdoReorderAudio specifies the time, in milliseconds, by which the audio packets are reordered in the ad stream. If the value of this object is set to '0', then audio reordering is disabled.
TMN tmnxMcPathBdlChlVdoFccMinDuratn	1.3.6.1.4.1.6527.3.1.2.54.9.1.29	TmnxMcPathVdoFccMinDurationOrZero	read-create	The value of tmnxMcPathBdlChlVdoFccMinDuratn specifies the minimum time duration, in milliseconds, of the Fast Channel Change (FCC) burst. The value of this object determines the starting point of the FCC burst. If the current Group of Pictures (GOP) has less than the minimum duration worth of data, FCC burst begins from the previous GOP. When the value of this object is set to '0', then the minimum time duration will be inherited from the value of tmnxMcPathBdlVdoFccMinDuration at the bundle level.
TMN tmnxMcPathBdlChlKAOverrideTimer	1.3.6.1.4.1.6527.3.1.2.54.9.1.30	TmnxMcPathKeepAliveOverrideTimer	read-create	The value of tmnxMcPathBdlChlKAOverrideTimer specifies the time, in seconds, used to override the keep alive timer for all (S,G) entries that fall under a channel (a group or a group range) except for (S,G) entries where Keep Alive Timer Override is also configured under the source-override. If the value of this object is set to '0', then Keep Alive Timer Override for the channel is disabled.
U32 tmnxMcPathBdlChlP2MPId	1.3.6.1.4.1.6527.3.1.2.54.9.1.31	Unsigned32	read-create	The value of tmnxMcPathBdlChlP2MPId specifies the identifier of a Point to Multipoint (P2MP) Label Switch Path (LSP) associated with this tunnel interface.
T/F tmnxMcPathBdlChlVdoAnalyzer	1.3.6.1.4.1.6527.3.1.2.54.9.1.32	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoAnalyzer specifies whether or not the analyzer is enabled for video.
TIT tmnxMcPathBdlChlVdoAnalyzerDesc	1.3.6.1.4.1.6527.3.1.2.54.9.1.33	TItemDescription	read-create	The value of tmnxMcPathBdlChlVdoAnalyzerDesc specifies the description for the video analyzer.
IPt tmnxMcPathBdlChlVdoStrSelSrc1Typ	1.3.6.1.4.1.6527.3.1.2.54.9.1.34	InetAddressType	read-create	The value of tmnxMcPathBdlChlVdoStrSelSrc1Typ specifies the address type of tmnxMcPathBdlChlVdoStrSelSrc1.
IP tmnxMcPathBdlChlVdoStrSelSrc1	1.3.6.1.4.1.6527.3.1.2.54.9.1.35	InetAddress	read-create	The value of tmnxMcPathBdlChlVdoStrSelSrc1 specifies the address of the first source in stream selection.
TNA tmnxMcPathBdlChlVdoStrSelIntf1	1.3.6.1.4.1.6527.3.1.2.54.9.1.36	TNamedItemOrEmpty	read-create	The value of tmnxMcPathBdlChlVdoStrSelIntf1 specifies the interface on which multicast traffic from 'tmnxMcPathBdlChlVdoStrSelSrc1' arrives.
IPt tmnxMcPathBdlChlVdoStrSelSrc2Typ	1.3.6.1.4.1.6527.3.1.2.54.9.1.37	InetAddressType	read-create	The value of tmnxMcPathBdlChlVdoStrSelSrc2Typ specifies the address type of tmnxMcPathBdlChlVdoStrSelSrc2.
IP tmnxMcPathBdlChlVdoStrSelSrc2	1.3.6.1.4.1.6527.3.1.2.54.9.1.38	InetAddress	read-create	The value of tmnxMcPathBdlChlVdoStrSelSrc2 specifies the address of the second source in stream selection.
TNA tmnxMcPathBdlChlVdoStrSelIntf2	1.3.6.1.4.1.6527.3.1.2.54.9.1.39	TNamedItemOrEmpty	read-create	The value of tmnxMcPathBdlChlVdoStrSelIntf2 specifies the interface on which multicast traffic from 'tmnxMcPathBdlChlVdoStrSelSrc2' arrives.
tmnxMcPathChlSrcTable	1.3.6.1.4.1.6527.3.1.2.54.11		not-accessible	The tmnxMcPathChlSrcTable has an entry for each specified sender override context from the multicast information policy bundle channel range configured on this system.
tmnxMcPathChlSrcEntry	1.3.6.1.4.1.6527.3.1.2.54.11.1		not-accessible	Each row entry represents a specified sender configured for multicast bundle channel. Entries are created/deleted by the user.
IPt tmnxMcPathChlSrcSourceAddrType	1.3.6.1.4.1.6527.3.1.2.54.11.1.1	InetAddressType	not-accessible	The value of tmnxMcPathChlSrcSourceAddrType indicates the address type of tmnxMcPathChlSrcSourceAddr.
IP tmnxMcPathChlSrcSourceAddr	1.3.6.1.4.1.6527.3.1.2.54.11.1.2	InetAddress	not-accessible	The value of tmnxMcPathChlSrcSourceAddr indicates the start address of the multicast channel. Its type is specified by tmnxMcPathChlSrcSourceAddrType.
ROW tmnxMcPathChlSrcRowStatus	1.3.6.1.4.1.6527.3.1.2.54.11.1.3	RowStatus	read-create	The value of tmnxMcPathChlSrcRowStatus is used for creation/deletion of a specified sender override context for the multicast bundle.
TIM tmnxMcPathChlSrcLastChanged	1.3.6.1.4.1.6527.3.1.2.54.11.1.4	TimeStamp	read-only	The value of tmnxMcPathChlSrcLastChanged indicates the timestamp of last change to this row in tmnxMcPathChlSrcTable.
U32 tmnxMcPathChlSrcAdminBw	1.3.6.1.4.1.6527.3.1.2.54.11.1.5	Unsigned32	read-create	The value of tmnxMcPathChlSrcAdminBw specifies the multicast channel's administrative bandwidth in kilo-bits per second(kbps).
U32 tmnxMcPathChlSrcPref	1.3.6.1.4.1.6527.3.1.2.54.11.1.6	Unsigned32	read-create	The value of tmnxMcPathChlSrcPref specifies the channel's relative preference level for multicast channels. tmnxMcPathBdlChlPref specifies its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
TMN tmnxMcPathChlSrcBwActivity	1.3.6.1.4.1.6527.3.1.2.54.11.1.8	TmnxMcPathBwActivityTc	read-create	The value of tmnxMcPathChlSrcBwActivity specifies how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel. This object can have value 'use-admin-bw' only if tmnxMcPathChlSrcAdminBw is non-zero.
U32 tmnxMcPathChlSrcBwFallDelay	1.3.6.1.4.1.6527.3.1.2.54.11.1.9	Unsigned32	read-create	The value of tmnxMcPathChlSrcBwFallDelay specifies the value the bandwidth manager uses the falling-delay threshold to hold on to the previous highest bandwidth until the delay time has expired while operating in dynamic bandwidth mode. This allows the bandwidth manager ignore momentary drops in channel bandwidth. This value can only be set if tmnxMcPathChlSrcBwActivity is not set to 'none'. The default value of '0' means that there is no source override and tmnxMcPathBdlChlBwFallDelay should be used.
U32 tmnxMcPathChlSrcBwBlackHoleRt	1.3.6.1.4.1.6527.3.1.2.54.11.1.10	Unsigned32	read-create	The value of tmnxMcPathChlSrcBwBlackHoleRt specifies at which current rate a channel should be placed in the black-hole state. This value can only be set if tmnxMcPathChlSrcBwActivity is not set to 'none'.
TMN tmnxMcPathChlSrcExSfPath	1.3.6.1.4.1.6527.3.1.2.54.11.1.11	TmnxMcPathChlSfPathTypeTc	read-create	The value of tmnxMcPathChlSrcExSfPath specifies an explicit ingress switch fabric multicast path assigned to a multicast channel.
TMN tmnxMcPathChlSrcVdoFCCState	1.3.6.1.4.1.6527.3.1.2.54.11.1.12	TmnxEnabledDisabledOrInherit	read-create	The value of tmnxMcPathChlSrcVdoFCCState specifies the state of Fast Channel Change (FCC) server for this sender override context. When this object has a value of 'enabled', FCC server is enabled. When its value is 'disabled', FCC server is disabled. When its value is 'inherit', state of FCC server is inherited from the value of tmnxMcPathBdlChlVdoFCCState which specifies the state of FCC server at the channel level.
TMN tmnxMcPathChlSrcVdoRTState	1.3.6.1.4.1.6527.3.1.2.54.11.1.13	TmnxEnabledDisabledOrInherit	read-create	The value of tmnxMcPathChlSrcVdoRTState specifies the state of Retransmission (RT) Server for this sender override context. When this object has a value of 'enabled', RT server is enabled. When its value is 'disabled', RT server is disabled. When its value is 'inherit', state of RT server is inherited from the value of tmnxMcPathBdlChlVdoRTState which specifies the state of RT server at the channel level.
TMN tmnxMcPathChlSrcVdoChlType	1.3.6.1.4.1.6527.3.1.2.54.11.1.14	TmnxMcPathVdoChlTypeOrInherit	read-create	The value of tmnxMcPathChlSrcVdoChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP). When this object has a value of 'inherit', video channel type is inherited from the value of tmnxMcPathBdlChlVdoChlType which specifies the video channel type at channel level.
IPt tmnxMcPathChlSrcVdoRTAddrType	1.3.6.1.4.1.6527.3.1.2.54.11.1.15	InetAddressType	read-create	The value of tmnxMcPathChlSrcVdoRTAddrType specifies the address type of tmnxMcPathChlSrcVdoRTAddress.
IP tmnxMcPathChlSrcVdoRTAddress	1.3.6.1.4.1.6527.3.1.2.54.11.1.16	InetAddress	read-create	The value of tmnxMcPathChlSrcVdoRTAddress specifies the IP address of the Retransmission (RT) server.
TMN tmnxMcPathChlSrcVdoRTPort	1.3.6.1.4.1.6527.3.1.2.54.11.1.17	TmnxVdoPortNumber	read-create	The value of tmnxMcPathChlSrcVdoRTPort specifies the port of the Retransmission (RT) server.
TMN tmnxMcPathChlSrcVdoRTBufferSize	1.3.6.1.4.1.6527.3.1.2.54.11.1.18	TmnxMcPathVdoBufferSize	read-create	The value of tmnxMcPathChlSrcVdoRTBufferSize specifies the number of milliseconds worth of channel packets to store for the Retransmission (RT) server.
TMN tmnxMcPathChlSrcVdoLocalRTPort	1.3.6.1.4.1.6527.3.1.2.54.11.1.19	TmnxVdoPortNumber	read-create	The value of tmnxMcPathChlSrcVdoLocalRTPort specifies the local port on which Retransmission (RT) requests are received. The value of this object can only be set for the default bundle. This object was obsoleted from release 7.0R4.
TMN tmnxMcPathChlSrcVdoLocalFccPort	1.3.6.1.4.1.6527.3.1.2.54.11.1.20	TmnxVdoPortNumber	read-create	The value of tmnxMcPathChlSrcVdoLocalFccPort specifies the local port on which Fast Channel Change (FCC) requests are received. The value of this object can only be set for the default bundle. This object was obsoleted from release 7.0R4.
TMN tmnxMcPathChlSrcVdoGroupId	1.3.6.1.4.1.6527.3.1.2.54.11.1.21	TmnxVdoGrpIdOrInherit	read-create	The value of tmnxMcPathChlSrcVdoGroupId specifies the row index in the TIMETRA-VIDEO-MIB::tmnxVdoGrpTable for the video group information for this multicast information policy bundle. A value '0' indicates that no video-group is assigned to this multicast channel source. A value of '-1' indicates that video-group information is inherited from the value of tmnxMcPathBdlChlVdoGroupId which specifies the video-group information at the channel level.
TNA tmnxMcPathChlSrcTunnelIfLspName	1.3.6.1.4.1.6527.3.1.2.54.11.1.22	TNamedItemOrEmpty	read-create	The value of tmnxMcPathChlSrcTunnelIfLspName specifies the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface.
IPt tmnxMcPathChlSrcTunIfSdAddrType	1.3.6.1.4.1.6527.3.1.2.54.11.1.23	InetAddressType	read-create	The value of tmnxMcPathChlSrcTunIfSdAddrType specifies the type for tmnxMcPathChlSrcTunIfSdAddr.
IP tmnxMcPathChlSrcTunIfSdAddr	1.3.6.1.4.1.6527.3.1.2.54.11.1.24	InetAddress	read-create	The value of tmnxMcPathChlSrcTunIfSdAddr specifies the sender address.
TMN tmnxMcPathChlSrcVdoLocalRTState	1.3.6.1.4.1.6527.3.1.2.54.11.1.25	TmnxEnabledDisabledOrInherit	read-create	The value of tmnxMcPathChlSrcVdoLocalRTState specifies the state of local Retransmission (RT) Server for this sender override context. When this object has a value of 'enabled', local RT server is enabled. When its value is 'disabled', local RT server is disabled. When its value is 'inherit', state of local RT server is inherited from the value of tmnxMcPathBdlChlVdoLocalRTState which specifies the state of local RT server at the channel level.
TMN tmnxMcPathChlSrcVdoReorderAudio	1.3.6.1.4.1.6527.3.1.2.54.11.1.26	TmnxMcPathVdoReorderAudio	read-create	The value of tmnxMcPathChlSrcVdoReorderAudio specifies the time, in milliseconds, by which the audio packets are reordered in the ad stream. If the value of this object is set to '0', then audio reordering is disabled.
TMN tmnxMcPathChlSrcVdoFccMinDuratn	1.3.6.1.4.1.6527.3.1.2.54.11.1.27	TmnxMcPathVdoFccMinDurationOrZero	read-create	The value of tmnxMcPathChlSrcVdoFccMinDuratn specifies the minimum time duration, in milliseconds, of the Fast Channel Change (FCC) burst. The value of this object determines the starting point of the FCC burst. If the current Group of Pictures (GOP) has less than the minimum duration worth of data, FCC burst begins from the previous GOP. When the value of this object is set to '0', then the minimum time duration will be inherited from the value of tmnxMcPathBdlChlVdoFccMinDuratn at the channel level.
TMN tmnxMcPathChlSrcKAOverrideTimer	1.3.6.1.4.1.6527.3.1.2.54.11.1.28	TmnxMcPathKeepAliveOverrideTimer	read-create	The value of tmnxMcPathChlSrcKAOverrideTimer specifies the time, in seconds, used to override the keep alive timer for all (S,G) entries that fall under the source-override in the PIM instance. If the value of this object is set to '0', then Keep Alive Timer Override under source-override is disabled.
U32 tmnxMcPathChlSrcP2MPId	1.3.6.1.4.1.6527.3.1.2.54.11.1.29	Unsigned32	read-create	The value of tmnxMcPathChlSrcP2MPId specifies the identifier of a Point to Multipoint (P2MP) Label Switch Path (LSP) associated with this tunnel interface.
T/F tmnxMcPathChlSrcVdoAnalyzer	1.3.6.1.4.1.6527.3.1.2.54.11.1.30	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoAnalyzer specifies whether or not the analyzer is enabled for video.
TIT tmnxMcPathChlSrcVdoAnalyzerDesc	1.3.6.1.4.1.6527.3.1.2.54.11.1.31	TItemDescription	read-create	The value of tmnxMcPathChlSrcVdoAnalyzerDesc specifies the description for the video analyzer.
IPt tmnxMcPathChlSrcVdoStSeSrc1Type	1.3.6.1.4.1.6527.3.1.2.54.11.1.32	InetAddressType	read-create	The value of tmnxMcPathChlSrcVdoStSeSrc1Type specifies the address type of tmnxMcPathChlSrcVdoStSeSrc1.
IP tmnxMcPathChlSrcVdoStSeSrc1	1.3.6.1.4.1.6527.3.1.2.54.11.1.33	InetAddress	read-create	The value of tmnxMcPathChlSrcVdoStSeSrc1 specifies the address of the first source in stream selection.
TNA tmnxMcPathChlSrcVdoStSeIntf1	1.3.6.1.4.1.6527.3.1.2.54.11.1.34	TNamedItemOrEmpty	read-create	The value of tmnxMcPathChlSrcVdoStSeIntf1 specifies the interface on which multicast traffic from 'tmnxMcPathChlSrcVdoStSeSrc1' arrives.
IPt tmnxMcPathChlSrcVdoStSeSrc2Type	1.3.6.1.4.1.6527.3.1.2.54.11.1.35	InetAddressType	read-create	The value of tmnxMcPathChlSrcVdoStSeSrc2Type specifies the address type of tmnxMcPathChlSrcVdoStSeSrc2.
IP tmnxMcPathChlSrcVdoStSeSrc2	1.3.6.1.4.1.6527.3.1.2.54.11.1.36	InetAddress	read-create	The value of tmnxMcPathChlSrcVdoStSeSrc2 specifies the address of the second source in stream selection.
TNA tmnxMcPathChlSrcVdoStSeIntf2	1.3.6.1.4.1.6527.3.1.2.54.11.1.37	TNamedItemOrEmpty	read-create	The value of tmnxMcPathChlSrcVdoStSeIntf2 specifies the interface on which multicast traffic from 'tmnxMcPathChlSrcVdoStSeSrc2' arrives.
tmnxMcPathOperChlTable	1.3.6.1.4.1.6527.3.1.2.54.12		not-accessible	The tmnxMcPathOperChlTable listing the (S,G) entries for the multicast information policy bundle channel range on this system.
tmnxMcPathOperChlEntry	1.3.6.1.4.1.6527.3.1.2.54.12.1		not-accessible	An entry in the tmnxMcPathOperChlTable. This is a read-only table.
TMN tmnxMcPathOperChlRtrType	1.3.6.1.4.1.6527.3.1.2.54.12.1.1	TmnxMcPathRtrType	not-accessible	The value of vRtrType specifies the type of virtual router.
IPt tmnxMcPathOperChlGrpAddrType	1.3.6.1.4.1.6527.3.1.2.54.12.1.2	InetAddressType	not-accessible	The value of tmnxMcPathOperChlGrpAddrType indicates the address type of tmnxMcPathOperChlGrpAddr.
IP tmnxMcPathOperChlGrpAddr	1.3.6.1.4.1.6527.3.1.2.54.12.1.3	InetAddress	not-accessible	The value of tmnxMcPathOperChlGrpAddr indicates the group address of the multicast channel. Its type is specified by tmnxMcPathOperChlGrpAddrType.
IPt tmnxMcPathOperChlSrcAddrType	1.3.6.1.4.1.6527.3.1.2.54.12.1.4	InetAddressType	not-accessible	The value of tmnxMcPathOperChlSrcAddrType indicates the address type of tmnxMcPathOperChlSrcAddr.
IP tmnxMcPathOperChlSrcAddr	1.3.6.1.4.1.6527.3.1.2.54.12.1.5	InetAddress	not-accessible	The value of tmnxMcPathOperChlSrcAddr indicates the source address of the multicast channel. Its type is specified by tmnxMcPathOperChlSrcAddrType.
G32 tmnxMcPathOperChlBandwidthEx	1.3.6.1.4.1.6527.3.1.2.54.12.1.6	Gauge32	read-only	The value of tmnxMcPathOperChlBandwidth indicates the multicast channel's channel's current bandwidth in kilo-bits-per-second.
TMN tmnxMcPathOperChlCurrentPath	1.3.6.1.4.1.6527.3.1.2.54.12.1.7	TmnxMcPathChlSfPathTypeTc	read-only	The value of tmnxMcPathOperChlCurrentPath indicates an explicit ingress switch fabric multicast path assigned to a multicast channel.
T/F tmnxMcPathOperChlExplicit	1.3.6.1.4.1.6527.3.1.2.54.12.1.8	TruthValue	read-only	The value of tmnxMcPathOperChlExplicit indicates how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel.
G32 tmnxMcPathOperChlAdminBw	1.3.6.1.4.1.6527.3.1.2.54.12.1.9	Gauge32	read-only	The value of tmnxMcPathOperChlAdminBw indicates the multicast channel's administrative bandwidth value taking into account the inheritance of the field i.e. if the administrative bandwidth is not configured at the channel level, it will inherit it from the bundle and thus its operational administrative bandwidth value will be that of the bundle.
G32 tmnxMcPathOperChlPref	1.3.6.1.4.1.6527.3.1.2.54.12.1.10	Gauge32	read-only	The value of tmnxMcPathOperChlPref indicates the channel's relative preference level for multicast channels. tmnxMcPathBdlChlPref indicates its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
T/F tmnxMcPathOperChlBwBlackHole	1.3.6.1.4.1.6527.3.1.2.54.12.1.11	TruthValue	read-only	The value of tmnxMcPathOperChlBwBlackHole indicates if the source,group (S,G) is in black-hole state.
G32 tmnxMcPathOperChlBwBlackHoleRt	1.3.6.1.4.1.6527.3.1.2.54.12.1.12	Gauge32	read-only	The value of tmnxMcPathOperChlBwBlackHoleRt indicates at which current rate a channel should be placed in the black-hole state.
G32 tmnxMcPathOperChlIngLastHighest	1.3.6.1.4.1.6527.3.1.2.54.12.1.13	Gauge32	read-only	The value of tmnxMcPathOperChlIngLastHighest indicates the value of the multicast bandwidth that is currently being accounted for the channel on its forwarding path on the MDA. The value is computed based on periodic polling of statistics and represents the last highest bandwidth value since the bandwidth update timer for the channel was (re)started. This field inherits the value of tmnxMcPathOperChlIngSecHighest when the bandwidth update timer expires. This indicates that the bandwidth of the channel is lower than that recorded when the bandwidth update timer was last started. Before the bandwidth update timer expires, if the polled value of the bandwidth is greater than or equal to the current value, the current value is updated to the new value if necessary and the bandwidth update timer is restarted.
G32 tmnxMcPathOperChlIngSecHighest	1.3.6.1.4.1.6527.3.1.2.54.12.1.14	Gauge32	read-only	The value of tmnxMcPathOperChlIngSecHighest indicates the value of the second highest multicast bandwidth recorded for the channel on the MDA since the bandwidth update timer for the channel was (re)started. This value is computed based on periodic polling of statistics and is reset to zero everytime the bandwidth update timer for the channel is restarted.
U32 tmnxMcPathOperChlTimeRemaining	1.3.6.1.4.1.6527.3.1.2.54.12.1.15	Unsigned32	read-only	The value of tmnxMcPathOperChlTimeRemaining indicates the time remaining before the bandwidth update timer for the channel on the MDA expires. The bandwidth update timer determines how often multicast bandwidth is updated for a channel. When the value of this field becomes zero indicating that the bandwidth timer has expired, the bandwidth of the channel represented by the field tmnxMcPathOperChlIngLastHighest is updated to the value of the field tmnxMcPathOperChlIngSecHighest. If the timer is restarted, it indicates that the current bandwidth of the channel has either stayed the same or increased since the last poll.
U32 tmnxMcPathOperChlCurrentPlane	1.3.6.1.4.1.6527.3.1.2.54.12.1.16	Unsigned32	read-only	The value of tmnxMcPathOperChlCurrentPlane indicates the plane used to forward this channel.
tmnxMcPathMdaOperChlTable	1.3.6.1.4.1.6527.3.1.2.54.13		not-accessible	The tmnxMcPathMdaOperChlTable listing the (S,G) entries for the multicast information policy bundle channel range on this system.
tmnxMcPathMdaOperChlEntry	1.3.6.1.4.1.6527.3.1.2.54.13.1		not-accessible	An entry in the tmnxMcPathMdaOperChlTable. This is a read-only table.
TMN tmnxMcPathMdaOperChlRtrType	1.3.6.1.4.1.6527.3.1.2.54.13.1.1	TmnxMcPathRtrType	not-accessible	The value of vRtrType specifies the type of virtual router.
IPt tmnxMcPathMdaOperChlGrpAddrType	1.3.6.1.4.1.6527.3.1.2.54.13.1.2	InetAddressType	not-accessible	The value of tmnxMcPathMdaOperChlGrpAddrType indicates the address type of tmnxMcPathMdaOperChlGrpAddr.
IP tmnxMcPathMdaOperChlGrpAddr	1.3.6.1.4.1.6527.3.1.2.54.13.1.3	InetAddress	not-accessible	The value of tmnxMcPathMdaOperChlGrpAddr indicates the group address of the multicast channel. Its type is specified by tmnxMcPathMdaOperChlGrpAddrType.
IPt tmnxMcPathMdaOperChlSrcAddrType	1.3.6.1.4.1.6527.3.1.2.54.13.1.4	InetAddressType	not-accessible	The value of tmnxMcPathMdaOperChlSrcAddrType indicates the address type of tmnxMcPathMdaOperChlSrcAddr.
IP tmnxMcPathMdaOperChlSrcAddr	1.3.6.1.4.1.6527.3.1.2.54.13.1.5	InetAddress	not-accessible	The value of tmnxMcPathMdaOperChlSrcAddr indicates the source address of the multicast channel. Its type is specified by tmnxMcPathMdaOperChlSrcAddrType.
G32 tmnxMcPathMdaOperChlBandwidth	1.3.6.1.4.1.6527.3.1.2.54.13.1.6	Gauge32	read-only	The value of tmnxMcPathMdaOperChlBandwidth indicates the multicast channel's current bandwidth in kilo-bits per second(kbps).
TMN tmnxMcPathMdaOperChlCurrentPath	1.3.6.1.4.1.6527.3.1.2.54.13.1.7	TmnxMcPathChlSfPathTypeTc	read-only	The value of tmnxMcPathMdaOperChlCurrentPath indicates an explicit ingress switch fabric multicast path assigned to a multicast channel.
T/F tmnxMcPathMdaOperChlExplicit	1.3.6.1.4.1.6527.3.1.2.54.13.1.8	TruthValue	read-only	The value of tmnxMcPathMdaOperChlExplicit indicates how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel.
G32 tmnxMcPathMdaOperChlAdminBw	1.3.6.1.4.1.6527.3.1.2.54.13.1.9	Gauge32	read-only	The value of tmnxMcPathMdaOperChlAdminBw indicates the multicast channel's administrative bandwidth value taking into account the inheritance of the field i.e. if the administrative bandwidth is not configured at the channel level, it will inherit it from the bundle and thus its operational administrative bandwidth value will be that of the bundle.
G32 tmnxMcPathMdaOperChlPref	1.3.6.1.4.1.6527.3.1.2.54.13.1.10	Gauge32	read-only	The value of tmnxMcPathMdaOperChlPref indicates the channel's relative preference level for multicast channels. tmnxMcPathBdlChlPref indicates its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
T/F tmnxMcPathMdaOperChlBwBlackHole	1.3.6.1.4.1.6527.3.1.2.54.13.1.11	TruthValue	read-only	The value of tmnxMcPathMdaOperChlBwBlackHole indicates if the source,group (S,G) is in black-hole state.
G32 tmnxMcPathMdaOperChlBwBlackHoleRt	1.3.6.1.4.1.6527.3.1.2.54.13.1.12	Gauge32	read-only	The value of tmnxMcPathMdaOperChlBwBlackHoleRt indicates at which current rate a channel should be placed in the black-hole state.
G32 tmnxMcPathMdaOperChlIngLastHigh	1.3.6.1.4.1.6527.3.1.2.54.13.1.13	Gauge32	read-only	The value of tmnxMcPathMdaOperChlIngLastHigh indicates the value of the multicast bandwidth that is currently being accounted for the channel on its forwarding path on the MDA. The value is computed based on periodic polling of statistics and represents the last highest bandwidth value since the bandwidth update timer for the channel was (re)started. This field inherits the value of tmnxMcPathOperChlIngSecHighest when the bandwidth update timer expires. This indicates that the bandwidth of the channel is lower than that recorded when the bandwidth update timer was last started. Before the bandwidth update timer expires, if the polled value of the bandwidth is greater than or equal to the current value, the current value is updated to the new value if necessary and the bandwidth update timer is restarted.
G32 tmnxMcPathMdaOperChlIngSecHigh	1.3.6.1.4.1.6527.3.1.2.54.13.1.14	Gauge32	read-only	The value of tmnxMcPathMdaOperChlIngSecHigh indicates the value of the second highest multicast bandwidth recorded for the channel on the MDA since the bandwidth update timer for the channel was (re)started. This value is computed based on periodic polling of statistics and is reset to zero everytime the bandwidth update timer for the channel is restarted.
U32 tmnxMcPathMdaOperChlTimeRemain	1.3.6.1.4.1.6527.3.1.2.54.13.1.15	Unsigned32	read-only	The value of tmnxMcPathMdaOperChlTimeRemain indicates the time remaining before the bandwidth update timer for the channel on the MDA expires. The bandwidth update timer determines how often multicast bandwidth is updated for a channel. When the value of this field becomes zero indicating that the bandwidth timer has expired, the bandwidth of the channel represented by the field tmnxMcPathOperChlIngLastHighest is updated to the value of the field tmnxMcPathOperChlIngSecHighest. If the timer is restarted, it indicates that the current bandwidth of the channel has either stayed the same or increased since the last poll.
U32 tmnxMcPathMdaOperChlCurrentPlane	1.3.6.1.4.1.6527.3.1.2.54.13.1.16	Unsigned32	read-only	The value of tmnxMcPathMdaOperChlCurrentPlane indicates the plane used to forward this channel.
tmnxMcPathBwPlcyT2PathTable	1.3.6.1.4.1.6527.3.1.2.54.14		not-accessible	The tmnxMcPathBwPlcyT2PathTable has an entry for the primary and secondary ingress multicast paths. An entry is created in this table whenever an entry for a bandwidth policy is created in the tmnxMcPathBwPlcyTable. This entry is relevant only for IOM3.
tmnxMcPathBwPlcyT2PathEntry	1.3.6.1.4.1.6527.3.1.2.54.14.1		not-accessible	Each row entry represents a particular ingress multicast path configuration.
TMN tmnxMcPathBwPlcyT2PathType	1.3.6.1.4.1.6527.3.1.2.54.14.1.1	TmnxMcPathChlSfPathTypeTc	not-accessible	The value of tmnxMcPathBwPlcyT2PathType specifies the type of the path. Only two types supported for T2-paths - 'primary' and 'secondary'.
U32 tmnxMcPathBwPlcyT2PathCbs	1.3.6.1.4.1.6527.3.1.2.54.14.1.2	Unsigned32	read-create	The value of tmnxMcPathBwPlcyT2PathCbs specifies committed buffer size(CBS). The value of tmnxMcPathBwPlcyT2PathCbs overrides the default CBS for each individual path's queue. The default value of tmnxMcPathBwPlcyT2PathCbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyT2PathCbs for the secondary path is 3000.
U32 tmnxMcPathBwPlcyT2PathMbs	1.3.6.1.4.1.6527.3.1.2.54.14.1.3	Unsigned32	read-create	The value of tmnxMcPathBwPlcyT2PathMbs specifies Maximum Buffer Size(MBS). The value of tmnxMcPathBwPlcyT2PathMbs overrides the default MBS for each individual path's queue. The default value of tmnxMcPathBwPlcyT2PathMbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyT2PathMbs for the secondary path is 4000.
U32 tmnxMcPathBwPlcyT2PathHighPrio	1.3.6.1.4.1.6527.3.1.2.54.14.1.4	Unsigned32	read-create	The value of tmnxMcPathBwPlcyT2PathHighPrio specifies percent of queue depth reserved for high congestion priority traffic. The value of tmnxMcPathBwPlcyT2PathHighPrio overrides the default percentage value used to determine the low priority MBS value for the queue. By default, 10 percent of the queue depth is reserved for high congestion priority traffic and this default value is same for secondary paths.
U32 tmnxMcPathBwPlcyT2PathPaths	1.3.6.1.4.1.6527.3.1.2.54.14.1.5	Unsigned32	read-create	The value of tmnxMcPathBwPlcyT2PathPaths specifies the number of paths for the secondary path index only.
U32 tmnxMcPathBwPlcyT2PathDualPaths	1.3.6.1.4.1.6527.3.1.2.54.14.1.6	Unsigned32	read-create	The value of tmnxMcPathBwPlcyT2PathDualPaths specifies the number of paths for the secondary path index for dual-sfm mode.
TIM tmnxMcPathBwPlcyT2PathLastChanged	1.3.6.1.4.1.6527.3.1.2.54.14.1.7	TimeStamp	read-only	The value of tmnxMcPathBwPlcyT2PathLastChanged indicates the timestamp of last change to this row in tmnxMcPathBwPlcyT2PathTable.
tmnxMcPathVdoPlcyTable	1.3.6.1.4.1.6527.3.1.2.54.15		not-accessible	The tmnxMcPathVdoPlcyTable has an entry for each multicast video policy configured on this system.
tmnxMcPathVdoPlcyEntry	1.3.6.1.4.1.6527.3.1.2.54.15.1		not-accessible	Each row entry represents a particular multicast video policy. Entries can be created/deleted by the user.
IPt tmnxMcPathVdoPlcyIfAddrType	1.3.6.1.4.1.6527.3.1.2.54.15.1.1	InetAddressType	not-accessible	The value of tmnxMcPathVdoPlcyIfAddrType specifies the address type of tmnxMcPathVdoPlcyIfAddress.
IP tmnxMcPathVdoPlcyIfAddress	1.3.6.1.4.1.6527.3.1.2.54.15.1.2	InetAddress	not-accessible	The value of tmnxMcPathVdoPlcyIfAddress specifies the IP address of the video interface. The IP address of video interface can be configured within the context of a service to which this multicast video policy is assigned. If the IP address does not match the IP address assigned to a video interface, the parameters defined within this context have no effect.
TMN tmnxMcPathVdoPlcyChlType	1.3.6.1.4.1.6527.3.1.2.54.15.1.3	TmnxMcPathVdoChlType	not-accessible	The value of tmnxMcPathVdoPlcyChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP). A value of 'default' indicates that this is default video policy for High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP).
ROW tmnxMcPathVdoPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.54.15.1.4	RowStatus	read-create	The value of tmnxMcPathVdoPlcyRowStatus specifies the row status of this row. It is used for creation/deletion of multicast video policy.
TIM tmnxMcPathVdoPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.54.15.1.5	TimeStamp	read-only	The value of tmnxMcPathVdoPlcyLastChanged indicates the timestamp of last change to this row in tmnxMcPathVdoPlcyTable.
T/F tmnxMcPathVdoPlcyLclRTSvrState	1.3.6.1.4.1.6527.3.1.2.54.15.1.6	TruthValue	read-create	The value of tmnxMcPathVdoPlcyLclRTSvrState specifies whether or not local Retransmission (RT) server is enabled. It indicates whether to process the Retransmission (RT) requests from the client. The value of tmnxMcPathVdoPlcyLclRTSvrState is only applicable when tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'.
U32 tmnxMcPathVdoPlcyRTRate	1.3.6.1.4.1.6527.3.1.2.54.15.1.7	Unsigned32	read-create	The value of tmnxMcPathVdoPlcyRTRate specifies the rate at which retransmission packets are sent to the client. A default value of '5' indicates that retransmission rate is set to 5% above nominal bandwidth.
TMN tmnxMcPathVdoPlcySubBwLimit	1.3.6.1.4.1.6527.3.1.2.54.15.1.8	TmnxMcPathVdoBwLimit	read-create	The value of tmnxMcPathVdoPlcySubBwLimit specifies the per-subscriber egress bandwidth limit for the combined Retransmission (RT) and Fast Channel Change (FCC). If the bandwidth for a request will exceed the bandwidth limit, the request is logged and dropped. The value of tmnxMcPathVdoPlcySubBwLimit is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
TMN tmnxMcPathVdoPlcyFCCSvrMode	1.3.6.1.4.1.6527.3.1.2.54.15.1.9	TmnxVdoFccServerMode	read-create	The value of tmnxMcPathVdoPlcyFCCSvrMode specifies the mode of the Fast Channel Change (FCC) server. It indicates how the FCC server will send unicast stream to the client. The value of tmnxMcPathVdoPlcyFCCSvrMode is only applicable when tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'.
U32 tmnxMcPathVdoPlcyFCCBurst	1.3.6.1.4.1.6527.3.1.2.54.15.1.10	Unsigned32	read-create	The value of tmnxMcPathVdoPlcyFCCBurst specifies the burst rate at which the Fast Channel Change (FCC) server will send unicast data to the client above the received rate to allow client to catch-up to the multicast stream. The value is only applicable if tmnxMcPathVdoPlcyFCCSvrMode is set to 'burst (1)' or 'hybrid (3)' and tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'. A default value of '25' indicates that FCC burst rate is set to 25% above received rate.
U32 tmnxMcPathVdoPlcyFCCMcHandover	1.3.6.1.4.1.6527.3.1.2.54.15.1.11	Unsigned32	read-create	The value of tmnxMcPathVdoPlcyFCCMcHandover specifies the rate at which the Fast Channel Change (FCC) server will send unicast data to the client during the handover to the multicast stream. The value of tmnxMcPathVdoPlcyFCCMcHandover is only applicable when tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'. Additionaly, when the value of tmnxMcPathVdoPlcyChlType is 'hd (2)', the maximum value of tmnxMcPathVdoPlcyFCCMcHandover is 100.
U32 tmnxMcPathVdoPlcyFCCDentThd	1.3.6.1.4.1.6527.3.1.2.54.15.1.12	Unsigned32	read-create	The value of tmnxMcPathVdoPlcyFCCDentThd specifies the dent threshold with which the Fast Channel Change (FCC) server will send unicast data to the client. The value is only applicable if the value of tmnxMcPathVdoPlcyFCCSvrMode is set to 'dent (2)' or 'hybrid (3)' and tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'.
TMN tmnxMcPathVdoPlcyRTPayloadType	1.3.6.1.4.1.6527.3.1.2.54.15.1.13	TmnxMcPathVdoPayloadType	read-create	The value of tmnxMcPathVdoPlcyRTPayloadType specifies the format to be used by Retransmission (RT) server to send retransmission packets. The default value '99' indicates that the frames will be sent in the RFC 4588 format. A value between 96 and 127 indicates the dynamic payload type value (as per RFC 3551) to be used for RFC 4588 formatted retransmission packets. A value of 33 indicates a mpeg-ts payload. The value of tmnxMcPathVdoPlcyRTPayloadType is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
U32 tmnxMcPathVdoPlcyMaxClntSessions	1.3.6.1.4.1.6527.3.1.2.54.15.1.14	Unsigned32	read-create	The value of tmnxMcPathVdoPlcyMaxClntSessions specifies the maximum number of RTCP sessions supported per client IP address. The value of tmnxMcPathVdoPlcyMaxClntSessions is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
U32 tmnxMcPathVdoPlcyMaxIgmpLatency	1.3.6.1.4.1.6527.3.1.2.54.15.1.15	Unsigned32	read-create	The value of tmnxMcPathVdoPlcyMaxIgmpLatency specifies the maximum duration from the time a client sends an IGMP join to the time it receives the first multicast packet. The value of tmnxMcPathVdoPlcyMaxIgmpLatency is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
tmnxMcPathBdlExtTable	1.3.6.1.4.1.6527.3.1.2.54.16		not-accessible	The tmnxMcPathBdlExtTable has an entry for each multicast information policy bundle configured on this system.
tmnxMcPathBdlExtEntry	1.3.6.1.4.1.6527.3.1.2.54.16.1		not-accessible	A row entry is created or deleted in this table when the corresponding operation on a row is done in tmnxMcPathBdlTable. Entries in tmnxMcPathBdlTable are created or deleted by the user. Each row entry represents a particular multicast information policy bundle.
TIM tmnxMcPathBdlVdoLastChanged	1.3.6.1.4.1.6527.3.1.2.54.16.1.1	TimeStamp	read-only	The value of tmnxMcPathBdlVdoLastChanged indicates the timestamp of the last change to this row in tmnxMcPathBdlExtTable.
T/F tmnxMcPathBdlVdoCcError	1.3.6.1.4.1.6527.3.1.2.54.16.1.2	TruthValue	read-create	The value of tmnxMcPathBdlVdoCcError specifies whether or not the continuity counter error is enabled for the video stream.
T/F tmnxMcPathBdlVdoPatRepError	1.3.6.1.4.1.6527.3.1.2.54.16.1.3	TruthValue	read-create	The value of tmnxMcPathBdlVdoPatRepError specifies whether or not PAT (Program Association Table) repetition error is enabled for the video stream.
U32 tmnxMcPathBdlVdoTncPatRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.4	Unsigned32	read-create	The value of tmnxMcPathBdlVdoTncPatRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PAT repitition and should always be a multiple of 100.
U32 tmnxMcPathBdlVdoQosPatRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.5	Unsigned32	read-create	The value of tmnxMcPathBdlVdoQosPatRep specifies the value of QOS (Quality of Service) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoQosPatRep' must also be greater than the value of 'tmnxMcPathBdlVdoTncPatRep'.
U32 tmnxMcPathBdlVdoPoaPatRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.6	Unsigned32	read-create	The value of tmnxMcPathBdlVdoPoaPatRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoPoaPatRep' must also be greater than the value of 'tmnxMcPathBdlVdoQosPatRep'.
T/F tmnxMcPathBdlVdoPatSyntax	1.3.6.1.4.1.6527.3.1.2.54.16.1.7	TruthValue	read-create	The value of tmnxMcPathBdlVdoPatSyntax specifies whether or not PAT syntax error is enabled for the video stream.
T/F tmnxMcPathBdlVdoPcrRepError	1.3.6.1.4.1.6527.3.1.2.54.16.1.8	TruthValue	read-create	The value of tmnxMcPathBdlVdoPcrRepError specifies whether or not PCR (Program Clock Reference) repetition error is enabled for the video stream.
U32 tmnxMcPathBdlVdoTncPcrRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.9	Unsigned32	read-create	The value of tmnxMcPathBdlVdoTncPcrRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PCR repitition and should always be a multiple of 100.
U32 tmnxMcPathBdlVdoQosPcrRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.10	Unsigned32	read-create	The value of tmnxMcPathBdlVdoQosPcrRep specifies the value of QOS (Quality of Service) in milli-seconds for PCR repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoQosPcrRep' must also be greater than the value of 'tmnxMcPathBdlVdoTncPcrRep'.
U32 tmnxMcPathBdlVdoPoaPcrRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.11	Unsigned32	read-create	The value of tmnxMcPathBdlVdoPoaPcrRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoPoaPcrRep' must also be greater than the value of 'tmnxMcPathBdlVdoQosPcrRep'.
U32 tmnxMcPathBdlVdoVidPIDAbsent	1.3.6.1.4.1.6527.3.1.2.54.16.1.12	Unsigned32	read-create	The value of tmnxMcPathBdlVdoVidPIDAbsent specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
T/F tmnxMcPathBdlVdoPIDPmtUnref	1.3.6.1.4.1.6527.3.1.2.54.16.1.13	TruthValue	read-create	The value of tmnxMcPathBdlVdoPIDPmtUnref specifies whether or not unreferenced PID (i.e. PIDs not specified in the PMT) error is enabled for the video stream.
T/F tmnxMcPathBdlVdoPmtRepError	1.3.6.1.4.1.6527.3.1.2.54.16.1.14	TruthValue	read-create	The value of tmnxMcPathBdlVdoPmtRepError specifies whether or not PMT (Program Map Table) repetition error is enabled for the video stream.
U32 tmnxMcPathBdlVdoTncPmtRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.15	Unsigned32	read-create	The value of tmnxMcPathBdlVdoTncPmtRep specifies the value of TNC (Tech Non-Conformance) in milli-seconds for PMT repitition and should always be a multiple of 100.
U32 tmnxMcPathBdlVdoQosPmtRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.16	Unsigned32	read-create	The value of tmnxMcPathBdlVdoQosPmtRep specifies the value of QOS (Quality of Service) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoQosPmtRep' must also be greater than the value of 'tmnxMcPathBdlVdoTncPmtRep'.
U32 tmnxMcPathBdlVdoPoaPmtRep	1.3.6.1.4.1.6527.3.1.2.54.16.1.17	Unsigned32	read-create	The value of tmnxMcPathBdlVdoPoaPmtRep specifies the value of POA (Program off Air) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoPoaPmtRep' must also be greater than the value of 'tmnxMcPathBdlVdoQosPmtRep'.
T/F tmnxMcPathBdlVdoPmtSyntax	1.3.6.1.4.1.6527.3.1.2.54.16.1.18	TruthValue	read-create	The value of tmnxMcPathBdlVdoPmtSyntax specifies whether or not PMT syntax error is enabled for the video stream.
T/F tmnxMcPathBdlVdoScte35Error	1.3.6.1.4.1.6527.3.1.2.54.16.1.19	TruthValue	read-create	The value of tmnxMcPathBdlVdoScte35Error specifies whether or not SCTE35 (Society of Cable Telecommunications Engineers) errors are enabled for the video stream. This object was obsoleted in the 9.0 release.
T/F tmnxMcPathBdlVdoTeiError	1.3.6.1.4.1.6527.3.1.2.54.16.1.20	TruthValue	read-create	The value of tmnxMcPathBdlVdoTeiError specifies whether or not TEI (Transport Error Indicator) error is enabled for the video stream.
T/F tmnxMcPathBdlVdoTsSyncLoss	1.3.6.1.4.1.6527.3.1.2.54.16.1.21	TruthValue	read-create	The value of tmnxMcPathBdlVdoTsSyncLoss specifies whether or not sync loss error is enabled for the video stream.
U32 tmnxMcPathBdlVdoNonVidPIDAbsent	1.3.6.1.4.1.6527.3.1.2.54.16.1.22	Unsigned32	read-create	The value of tmnxMcPathBdlVdoNonVidPIDAbsent specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of non-video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
TMN tmnxMcPathBdlVdoReportAlarm	1.3.6.1.4.1.6527.3.1.2.54.16.1.23	TmnxVdoAnalyzerAlarm	read-create	The value of tmnxMcPathBdlVdoReportAlarm specifies the severity of the analyzer state alarm for the video stream.
tmnxMcPathBdlChlExtTable	1.3.6.1.4.1.6527.3.1.2.54.17		not-accessible	The tmnxMcPathBdlChlExtTable has an entry for each multicast information policy bundle configured on this system.
tmnxMcPathBdlChlExtEntry	1.3.6.1.4.1.6527.3.1.2.54.17.1		not-accessible	A row entry is created or deleted in this table when the corresponding operation on a row is done in tmnxMcPathBdlChlTable. Entries in tmnxMcPathBdlChlTable are created or deleted by the user. Each row entry represents a particular multicast information policy bundle channel.
TIM tmnxMcPathBdlChlVdoLastChanged	1.3.6.1.4.1.6527.3.1.2.54.17.1.1	TimeStamp	read-only	The value of tmnxMcPathBdlChlVdoLastChanged indicates the timestamp of the last change to this row in tmnxMcPathBdlChlExtTable.
T/F tmnxMcPathBdlChlVdoCcError	1.3.6.1.4.1.6527.3.1.2.54.17.1.2	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoCcError specifies whether or not the continuity counter error is enabled for the video stream.
T/F tmnxMcPathBdlChlVdoPatRepError	1.3.6.1.4.1.6527.3.1.2.54.17.1.3	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoPatRepError specifies whether or not PAT (Program Association Table) repetition error is enabled for the video stream.
U32 tmnxMcPathBdlChlVdoTncPatRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.4	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoTncPatRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PAT repitition and should always be a multiple of 100.
U32 tmnxMcPathBdlChlVdoQosPatRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.5	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoQosPatRep specifies the value of QOS (Quality of Service) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoQosPatRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoTncPatRep'.
U32 tmnxMcPathBdlChlVdoPoaPatRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.6	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoPoaPatRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoPoaPatRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoQosPatRep'.
T/F tmnxMcPathBdlChlVdoPatSyntax	1.3.6.1.4.1.6527.3.1.2.54.17.1.7	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoPatSyntax specifies whether or not PAT syntax error is enabled for the video stream.
T/F tmnxMcPathBdlChlVdoPcrRepError	1.3.6.1.4.1.6527.3.1.2.54.17.1.8	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoPcrRepError specifies whether or not PCR (Program Clock Reference) repetition error is enabled for the video stream.
U32 tmnxMcPathBdlChlVdoTncPcrRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.9	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoTncPcrRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PCR repitition and should always be a multiple of 100.
U32 tmnxMcPathBdlChlVdoQosPcrRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.10	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoQosPcrRep specifies the value of QOS (Quality of Service) in milli-seconds for PCR repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoQosPcrRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoTncPcrRep'.
U32 tmnxMcPathBdlChlVdoPoaPcrRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.11	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoPoaPcrRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoPoaPcrRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoQosPcrRep'.
U32 tmnxMcPathBdlChlVdoVidPIDAbs	1.3.6.1.4.1.6527.3.1.2.54.17.1.12	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
T/F tmnxMcPathBdlChlVdoPIDPmtUnref	1.3.6.1.4.1.6527.3.1.2.54.17.1.13	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoPIDPmtUnref specifies whether or not unreferenced PID (i.e. PIDs not specified in the PMT) error is enabled for the video stream.
T/F tmnxMcPathBdlChlVdoPmtRepError	1.3.6.1.4.1.6527.3.1.2.54.17.1.14	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoPmtRepError specifies whether or not PMT (Program Map Table) repetition error is enabled for the video stream.
U32 tmnxMcPathBdlChlVdoTncPmtRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.15	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoTncPmtRep specifies the value of TNC (Tech Non-Conformance) in milli-seconds for PMT repitition and should always be a multiple of 100.
U32 tmnxMcPathBdlChlVdoQosPmtRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.16	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoQosPmtRep specifies the value of QOS (Quality of Service) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoQosPmtRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoTncPmtRep'.
U32 tmnxMcPathBdlChlVdoPoaPmtRep	1.3.6.1.4.1.6527.3.1.2.54.17.1.17	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoPoaPmtRep specifies the value of POA (Program off Air) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoPoaPmtRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoQosPmtRep'.
T/F tmnxMcPathBdlChlVdoPmtSyntax	1.3.6.1.4.1.6527.3.1.2.54.17.1.18	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoPmtSyntax specifies whether or not PMT syntax error is enabled for the video stream.
T/F tmnxMcPathBdlChlVdoScte35Error	1.3.6.1.4.1.6527.3.1.2.54.17.1.19	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoScte35Error specifies whether or not SCTE35 (Society of Cable Telecommunications Engineers) errors are enabled for the video stream. This object was obsoleted in the 9.0 release.
T/F tmnxMcPathBdlChlVdoTeiError	1.3.6.1.4.1.6527.3.1.2.54.17.1.20	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoTeiError specifies whether or not TEI (Transport Error Indicator) error is enabled for the video stream.
T/F tmnxMcPathBdlChlVdoTsSyncLoss	1.3.6.1.4.1.6527.3.1.2.54.17.1.21	TruthValue	read-create	The value of tmnxMcPathBdlChlVdoTsSyncLoss specifies whether or not sync loss error is enabled for the video stream.
U32 tmnxMcPathBdlChlVdoNonVidPIDAbs	1.3.6.1.4.1.6527.3.1.2.54.17.1.22	Unsigned32	read-create	The value of tmnxMcPathBdlChlVdoNonVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of non-video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
TMN tmnxMcPathBdlChlVdoReportAlarm	1.3.6.1.4.1.6527.3.1.2.54.17.1.23	TmnxVdoAnalyzerAlarm	read-create	The value of tmnxMcPathBdlChlVdoReportAlarm specifies the severity of the analyzer state alarm for the video stream.
tmnxMcPathChlSrcExtTable	1.3.6.1.4.1.6527.3.1.2.54.18		not-accessible	The tmnxMcPathBdlExtTable has an entry for each multicast information policy bundle configured on this system.
tmnxMcPathChlSrcExtEntry	1.3.6.1.4.1.6527.3.1.2.54.18.1		not-accessible	A row entry is created or deleted in this table when the corresponding operation on a row is done in tmnxMcPathChlSrcTable. Entries in tmnxMcPathChlSrcTable are created or deleted by the user. Each row entry represents a specified sender configured for multicast bundle channel.
TIM tmnxMcPathChlSrcVdoLastChanged	1.3.6.1.4.1.6527.3.1.2.54.18.1.1	TimeStamp	read-only	The value of tmnxMcPathChlSrcVdoLastChanged indicates the timestamp of the last change to this row in tmnxMcPathChlSrcExtTable.
T/F tmnxMcPathChlSrcVdoCcError	1.3.6.1.4.1.6527.3.1.2.54.18.1.2	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoCcError specifies whether or not the continuity counter error is enabled for the video stream.
T/F tmnxMcPathChlSrcVdoPatRepError	1.3.6.1.4.1.6527.3.1.2.54.18.1.3	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoPatRepError specifies whether or not PAT (Program Association Table) repetition error is enabled for the video stream.
U32 tmnxMcPathChlSrcVdoTncPatRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.4	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoTncPatRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PAT repitition and should always be a multiple of 100.
U32 tmnxMcPathChlSrcVdoQosPatRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.5	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoQosPatRep specifies the value of QOS (Quality of Service) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoQosPatRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoTncPatRep'.
U32 tmnxMcPathChlSrcVdoPoaPatRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.6	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoPoaPatRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoPoaPatRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoQosPatRep'.
T/F tmnxMcPathChlSrcVdoPatSyntax	1.3.6.1.4.1.6527.3.1.2.54.18.1.7	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoPatSyntax specifies whether or not PAT syntax error is enabled for the video stream.
T/F tmnxMcPathChlSrcVdoPcrRepError	1.3.6.1.4.1.6527.3.1.2.54.18.1.8	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoPcrRepError specifies whether or not PCR (Program Clock Reference) repetition error is enabled for the video stream.
U32 tmnxMcPathChlSrcVdoTncPcrRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.9	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoTncPcrRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PCR repitition and should always be a multiple of 100.
U32 tmnxMcPathChlSrcVdoQosPcrRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.10	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoQosPcrRep specifies the value of QOS (Quality of Service) in milli-seconds for PCR repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoQosPcrRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoTncPcrRep'.
U32 tmnxMcPathChlSrcVdoPoaPcrRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.11	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoPoaPcrRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoPoaPcrRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoQosPcrRep'.
U32 tmnxMcPathChlSrcVdoVidPIDAbs	1.3.6.1.4.1.6527.3.1.2.54.18.1.12	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
T/F tmnxMcPathChlSrcVdoPIDPmtUnref	1.3.6.1.4.1.6527.3.1.2.54.18.1.13	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoPIDPmtUnref specifies whether or not unreferenced PID (i.e. PIDs not specified in the PMT) error is enabled for the video stream.
T/F tmnxMcPathChlSrcVdoPmtRepError	1.3.6.1.4.1.6527.3.1.2.54.18.1.14	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoPmtRepError specifies whether or not PMT (Program Map Table) repetition error is enabled for the video stream.
U32 tmnxMcPathChlSrcVdoTncPmtRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.15	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoTncPmtRep specifies the value of TNC (Tech Non-Conformance) in milli-seconds for PMT repitition and should always be a multiple of 100.
U32 tmnxMcPathChlSrcVdoQosPmtRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.16	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoQosPmtRep specifies the value of QOS (Quality of Service) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoQosPmtRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoTncPmtRep'.
U32 tmnxMcPathChlSrcVdoPoaPmtRep	1.3.6.1.4.1.6527.3.1.2.54.18.1.17	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoPoaPmtRep specifies the value of POA (Program off Air) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoPoaPmtRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoQosPmtRep'.
T/F tmnxMcPathChlSrcVdoPmtSyntax	1.3.6.1.4.1.6527.3.1.2.54.18.1.18	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoPmtSyntax specifies whether or not PMT syntax error is enabled for the video stream.
T/F tmnxMcPathChlSrcVdoScte35Error	1.3.6.1.4.1.6527.3.1.2.54.18.1.19	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoScte35Error specifies whether or not SCTE35 (Society of Cable Telecommunications Engineers) errors are enabled for the video stream. This object was obsoleted in the 9.0 release.
T/F tmnxMcPathChlSrcVdoTeiError	1.3.6.1.4.1.6527.3.1.2.54.18.1.20	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoTeiError specifies whether or not TEI (Transport Error Indicator) error is enabled for the video stream.
T/F tmnxMcPathChlSrcVdoTsSyncLoss	1.3.6.1.4.1.6527.3.1.2.54.18.1.21	TruthValue	read-create	The value of tmnxMcPathChlSrcVdoTsSyncLoss specifies whether or not sync loss error is enabled for the video stream.
U32 tmnxMcPathChlSrcVdoNonVidPIDAbs	1.3.6.1.4.1.6527.3.1.2.54.18.1.22	Unsigned32	read-create	The value of tmnxMcPathChlSrcVdoNonVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of non-video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
TMN tmnxMcPathChlSrcVdoReportAlarm	1.3.6.1.4.1.6527.3.1.2.54.18.1.23	TmnxVdoAnalyzerAlarm	read-create	The value of tmnxMcPathChlSrcVdoReportAlarm specifies the severity of the analyzer state alarm for the video stream.
tmnxMcPathRprtDestTable	1.3.6.1.4.1.6527.3.1.2.54.19		not-accessible	The tmnxMcPathRprtDestTable has an entry for each multicast reporting destination configured on this system.
tmnxMcPathRprtDestEntry	1.3.6.1.4.1.6527.3.1.2.54.19.1		not-accessible	Each row entry represents a particular multicast reporting destination. Entries are created/deleted by the user.
TNA tmnxMcPathRprtDestName	1.3.6.1.4.1.6527.3.1.2.54.19.1.1	TNamedItem	not-accessible	The value of tmnxMcPathRprtDestName indicates the name of the multicast reporting destination.
ROW tmnxMcPathRprtDestRowStatus	1.3.6.1.4.1.6527.3.1.2.54.19.1.2	RowStatus	read-create	The value of tmnxMcPathRprtDestRowStatus is used for creation/deletion of multicast reporting destinations.
TIM tmnxMcPathRprtDestLastChanged	1.3.6.1.4.1.6527.3.1.2.54.19.1.3	TimeStamp	read-only	The value of tmnxMcPathRprtDestLastChanged indicates the timestamp of last change to this row in tmnxMcPathRprtDestTable.
TIT tmnxMcPathRprtDestDescription	1.3.6.1.4.1.6527.3.1.2.54.19.1.4	TItemDescription	read-create	The value of tmnxMcPathRprtDestDescription specifies the textual description of this multicast reporting destination.
IPt tmnxMcPathRprtDestAddrType	1.3.6.1.4.1.6527.3.1.2.54.19.1.5	InetAddressType	read-create	The value of tmnxMcPathRprtDestAddrType specifies the address type of tmnxMcPathRprtDestAddress.
IP tmnxMcPathRprtDestAddress	1.3.6.1.4.1.6527.3.1.2.54.19.1.6	InetAddress	read-create	The value of tmnxMcPathRprtDestAddress specifies the IP address of the multicast reporting destination.
INE tmnxMcPathRprtDestUdpDstPort	1.3.6.1.4.1.6527.3.1.2.54.19.1.7	InetPortNumber	read-create	The value of tmnxMcPathRprtDestUdpDstPort specifies the UDP port at tmnxMcPathRprtDestAddress where to send multicast reports to.
U32 tmnxMcPathRprtDestMaxTxDelay	1.3.6.1.4.1.6527.3.1.2.54.19.1.8	Unsigned32	read-create	The value of tmnxMcPathRprtDestMaxTxDelay specifies the maximum delay after which any cached reports will be flushed to the reporting destination. A value of 0 means the reports will not be cached, thus every report will trigger an ougtoing message
TMN tmnxMcPathRprtDestAdminState	1.3.6.1.4.1.6527.3.1.2.54.19.1.9	TmnxAdminState	read-create	The value of tmnxMcPathRprtDestAdminState indicates the administrative state of the mcast reporting destination.
U32 tmnxMcPathRprtDestFrmsSent	1.3.6.1.4.1.6527.3.1.2.54.19.1.10	Unsigned32	read-only	The value of tmnxMcPathRprtDestFrmsSent specifies the number of frames sent to this mcast reporting destination.
U32 tmnxMcPathRprtDestFrmsLost	1.3.6.1.4.1.6527.3.1.2.54.19.1.11	Unsigned32	read-only	The value of tmnxMcPathRprtDestFrmsLost specifies the number of frames lost for this mcast reporting destination.
U32 tmnxMcPathRprtDestRecsSent	1.3.6.1.4.1.6527.3.1.2.54.19.1.12	Unsigned32	read-only	The value of tmnxMcPathRprtDestRecsSent specifies the number of records sent to this mcast reporting destination.
U32 tmnxMcPathRprtDestRecsLost	1.3.6.1.4.1.6527.3.1.2.54.19.1.13	Unsigned32	read-only	The value of tmnxMcPathRprtDestRecsLost specifies the number of records lost for this mcast reporting destination.
tmnxMcPathNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.54
tmnxMcPathNotifications	1.3.6.1.4.1.6527.3.1.3.54.0
NTF tmnxMcPathSrcGrpBlkHole	1.3.6.1.4.1.6527.3.1.3.54.0.1			The tmnxMcPathSrcGrpBlkHole event is generated whenever a source, group(S,G) goes into a black-hole state.
NTF tmnxMcPathSrcGrpBlkHoleClear	1.3.6.1.4.1.6527.3.1.3.54.0.2			The tmnxMcPathSrcGrpBlkHoleClear event is generated whenever a source, group(S,G) comes out of black-hole state.
NTF tmnxMcPathAvailBwLimitReached	1.3.6.1.4.1.6527.3.1.3.54.0.3			The tmnxMcPathAvailBwLimitReached event is generated when the available bandwidth limit has reached.
NTF tmnxMcPathAvailBwValWithinRange	1.3.6.1.4.1.6527.3.1.3.54.0.4			The tmnxMcPathAvailBwValWithinRange event is generated when the available bandwidth limit falls below the maximum limit and is within the permitted range.

RFC description

Alcatel-Lucent SROS ingress multicast path management policy configuration and monitoring for service routing.

Start monitoring Alcatel-Lucent/Nokia SROS router (7750/7450 series) (ingress multicast bandwidth-policy config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-MCAST-PATH-MGMT-MIB