ARRIS-D5-VIDEO-SESSION-MIB

All MIBs › ARRIS-D5-VIDEO-SESSION-MIB

Organization: Arris International

Last Updated: 2010-07-26

Description: MIB for displaying video sessions and controlling Switched Digital Video RPC configuration on ARRIS D5 Universal Edge QAM devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARRIS-D5-VIDEO-SESSION-MIB?

This proprietary ARRIS MIB displays active video sessions and controls Switched Digital Video (SDV) Resource Pool Coordinator (RPC) configuration on the D5 Universal Edge QAM, a cable headend video delivery device. It exposes both configuration data for the SDV RPC subsystem (compatibility mode, persistence, QAM model, master SRM address, reset behavior, timeouts) and runtime/statistical data about SDV RPC requests and video sessions. For monitoring purposes it is used to check the operational health and software behavior of the SDV RPC service — confirming the RPC is reachable and correctly configured against the master Session Resource Manager (SRM), and tracking RPC request statistics and reset events to catch failures in video session setup or switched digital video delivery. It depends on and interoperates with the DNCS (Digital Network Control System) via the d5SdvRpcDncsCompatibility setting, tying it to the broader ARRIS/Cisco DNCS-based SDV ecosystem. It is deployed in cable operator headends running Switched Digital Video services on D5 Universal Edge QAM chassis, where engineers typically obtain the ARRIS-D5-VIDEO-SESSION-MIB download from ARRIS/Cisco to compile it into their monitoring systems.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARRIS-D5-VIDEO-SESSION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS D5 Universal Edge QAM

Monitoring Examples

An operator monitoring SDV health would check d5SdvRpcMasterSrmIpAddress and d5SdvRpcDncsCompatibility to confirm the RPC is correctly paired with its master SRM/DNCS, and poll the d5SdvRpcStatsTable (indexed by d5SdvRpcStatsIndex, with counters like d5SdvRpcStatsRequest) to track request volumes. A spike in reset events (via d5SdvRpcResetIndicatorType/Interval) or a stalled stats counter combined with a d5SdvRpcTimeout would indicate the RPC has lost contact with its master SRM or is failing to service SDV session requests.

What Can Be Monitored

active video session counts
SDV RPC configuration and compatibility mode
SDV RPC request statistics
RPC reset events/interval
RPC connectivity to master SRM

Imported Objects

From ARRIS-D5-VIDEO-MIB

D5Program

From ARRIS-MIB

arrisD5UEQam

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using d5VideoSessionQamCreateSessions OID:

Select an ARRIS D5 Universal Edge QAM (UEQ) (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type d5VideoSessionQamCreateSessions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of sessions created on this QAM channel. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT d5SdvLoadBalancingAssignment	1.3.6.1.4.1.4115.1.8.1.8.9.1.3	INTEGER	read-write	The SDV load balancing assignment of this Gigabit interface.
C32 d5SdvLoadBalancingBandwidth	1.3.6.1.4.1.4115.1.8.1.8.9.1.5	Counter32	read-only	The bandwidth used by SDV sessions on this Gigabit interface.
d5SdvLoadBalancingConfigurationGroup	1.3.6.1.4.1.4115.1.8.1.8.8			A collection of objects providing SDV load balancing configuration.
d5SdvLoadBalancingEntry	1.3.6.1.4.1.4115.1.8.1.8.9.1		not-accessible	An entry for the video session qam table.
INT d5SdvLoadBalancingForced	1.3.6.1.4.1.4115.1.8.1.8.8.1	INTEGER	read-write	Enables or disables SDV RPC forced load balancing.
NUM d5SdvLoadBalancingGigIfIndex	1.3.6.1.4.1.4115.1.8.1.8.9.1.1	InterfaceIndex	read-only	The ifIndex of the Gigabit interface.
INT d5SdvLoadBalancingGigOperStatus	1.3.6.1.4.1.4115.1.8.1.8.9.1.2	INTEGER	read-only	The load balancing operational state of this Gigabit interface.
INT d5SdvLoadBalancingMode	1.3.6.1.4.1.4115.1.8.1.8.8.2	INTEGER	read-write	Set operational mode of SDV load balancing.
C32 d5SdvLoadBalancingSessionCount	1.3.6.1.4.1.4115.1.8.1.8.9.1.4	Counter32	read-only	The number of SDV sessions on this Gigabit interface.
d5SdvLoadBalancingTable	1.3.6.1.4.1.4115.1.8.1.8.9		not-accessible	This table lists video session statistics for a particular QAM.
INT d5SdvRpc	1.3.6.1.4.1.4115.1.8.1.8.1.1	INTEGER	read-write	Enables or disables SDV RPC.
d5SdvRpcConfigurationGroup	1.3.6.1.4.1.4115.1.8.1.8.1			A collection of objects providing SDV RPC configuration.
INT d5SdvRpcDncsCompatibility	1.3.6.1.4.1.4115.1.8.1.8.1.2	INTEGER	read-write	DNCS compatibility mode configures the bind policy to assume streams exists.
IP d5SdvRpcMasterSrmIpAddress	1.3.6.1.4.1.4115.1.8.1.8.1.5	InetAddress	read-write	Sets the IP address of the master SRM to use for edge reset indications.
INT d5SdvRpcPersistence	1.3.6.1.4.1.4115.1.8.1.8.1.3	INTEGER	read-write	Enables persistent SDV client response connections.
INT d5SdvRpcQamModel	1.3.6.1.4.1.4115.1.8.1.8.1.4	INTEGER	read-write	Sets the SDV RPC QAM model (48/72/192 QAM channels). This can only be set if RPC is disabled.
INT d5SdvRpcResetIndicatorInterval	1.3.6.1.4.1.4115.1.8.1.8.1.7	INTEGER	read-write	Sets the SDV RPC reset-indicator repeat interval.
INT d5SdvRpcResetIndicatorType	1.3.6.1.4.1.4115.1.8.1.8.1.6	INTEGER	read-write	Sets the type of edge reset indications to send to the master SRM.
INT d5SdvRpcTimeout	1.3.6.1.4.1.4115.1.8.1.8.1.8	INTEGER	read-write	Sets the SDV RPC timeout.
d5VideoMulticastSessionEntry	1.3.6.1.4.1.4115.1.8.1.8.3.1		not-accessible	An entry for the video multicast session table.
OCT d5VideoMulticastSessionId	1.3.6.1.4.1.4115.1.8.1.8.3.1.3	OCTET STRING	read-only	Video session identifier.
IP d5VideoMulticastSessionIpAddress	1.3.6.1.4.1.4115.1.8.1.8.3.1.1	InetAddress	read-only	The multicast IP address of this video session.
d5VideoMulticastSessionTable	1.3.6.1.4.1.4115.1.8.1.8.3		not-accessible	This table maps multicast IP address and UPD port to video session ID.
U32 d5VideoMulticastSessionUdpPort	1.3.6.1.4.1.4115.1.8.1.8.3.1.2	Unsigned32	read-only	The destination multicast UDP port of this video session.
d5VideoMulticastTransportEntry	1.3.6.1.4.1.4115.1.8.1.8.5.1		not-accessible	An entry for the video session multicast transport table.
U32 d5VideoMulticastTransportId	1.3.6.1.4.1.4115.1.8.1.8.5.1.3	Unsigned32	read-only	Video multicast transport identifier.
IP d5VideoMulticastTransportIpAddress	1.3.6.1.4.1.4115.1.8.1.8.5.1.1	InetAddress	read-only	Video session transport multicast IP address.
d5VideoMulticastTransportTable	1.3.6.1.4.1.4115.1.8.1.8.5		not-accessible	This table maps multicast IP address and UPD port to transport ID.
U32 d5VideoMulticastTransportUdpPort	1.3.6.1.4.1.4115.1.8.1.8.5.1.2	Unsigned32	read-only	Video session transport destination UDP port.
U32 d5VideoSessionBandwidth	1.3.6.1.4.1.4115.1.8.1.8.2.1.5	Unsigned32	read-only	Configured video session bandwidth in bits per second.
U32 d5VideoSessionBitrate	1.3.6.1.4.1.4115.1.8.1.8.2.1.6	Unsigned32	read-only	Current measured video session bitrate in bits per second.
d5VideoSessionEntry	1.3.6.1.4.1.4115.1.8.1.8.2.1		not-accessible	An entry for the video session table.
U32 d5VideoSessionGroupActiveSessions	1.3.6.1.4.1.4115.1.8.1.8.6.1.4	Unsigned32	read-only	The number of video shell sessions in this group.
U32 d5VideoSessionGroupBandwidth	1.3.6.1.4.1.4115.1.8.1.8.6.1.5	Unsigned32	read-only	Configured video shell session group bandwidth in bits per second.
U32 d5VideoSessionGroupBitrate	1.3.6.1.4.1.4115.1.8.1.8.6.1.6	Unsigned32	read-only	Current measured video shell session group bitrate in bits per second.
d5VideoSessionGroupEntry	1.3.6.1.4.1.4115.1.8.1.8.6.1		not-accessible	An entry for the video session group table.
U32 d5VideoSessionGroupId	1.3.6.1.4.1.4115.1.8.1.8.6.1.1	Unsigned32	read-only	Video shell session group identifier.
U32 d5VideoSessionGroupMaxBoundSessions	1.3.6.1.4.1.4115.1.8.1.8.6.1.7	Unsigned32	read-only	High watermark for the number of bound sessions in this group.
U32 d5VideoSessionGroupNumSessions	1.3.6.1.4.1.4115.1.8.1.8.6.1.3	Unsigned32	read-only	The number of video shell sessions in this group.
NUM d5VideoSessionGroupQamIfIndex	1.3.6.1.4.1.4115.1.8.1.8.6.1.2	InterfaceIndex	read-only	The ifIndex of the output QAM used by this video shell session.
d5VideoSessionGroupTable	1.3.6.1.4.1.4115.1.8.1.8.6		not-accessible	This table lists video session groups.
OCT d5VideoSessionId	1.3.6.1.4.1.4115.1.8.1.8.2.1.1	OCTET STRING	read-only	Video session identifier.
d5VideoSessionMib	1.3.6.1.4.1.4115.1.8.1.8			This MIB contains objects to display video sessions and control Switched Digital Video RPC on the ARRIS D5 UEQ.
INT d5VideoSessionNoPidRemapping	1.3.6.1.4.1.4115.1.8.1.8.2.1.8	INTEGER	read-only	If this is enabled, PIDs are not remapped for this video session.
D5P d5VideoSessionProgramNumber	1.3.6.1.4.1.4115.1.8.1.8.2.1.11	D5Program	read-only	The program number of the active transport used by this video session.
G32 d5VideoSessionQamActiveBandwidth	1.3.6.1.4.1.4115.1.8.1.8.7.1.14	Gauge32	read-only	The current bandwidth reserved for bound and created sessions on this QAM channel.
G32 d5VideoSessionQamActiveSessions	1.3.6.1.4.1.4115.1.8.1.8.7.1.13	Gauge32	read-only	The current number of bound and created sessions on this QAM channel.
C32 d5VideoSessionQamBindSessionFailures	1.3.6.1.4.1.4115.1.8.1.8.7.1.10	Counter32	read-only	The total number of failed session binds on this QAM channel.
C32 d5VideoSessionQamBindSessions	1.3.6.1.4.1.4115.1.8.1.8.7.1.7	Counter32	read-only	The total number of sessions bound on this QAM channel.
C32 d5VideoSessionQamCreateSessionFailures	1.3.6.1.4.1.4115.1.8.1.8.7.1.9	Counter32	read-only	The total number of failed session creations on this QAM channel.
C32 d5VideoSessionQamCreateSessionsEx	1.3.6.1.4.1.4115.1.8.1.8.7.1.3	Counter32	read-only	The total number of sessions created on this QAM channel.
C32 d5VideoSessionQamDeleteSessions	1.3.6.1.4.1.4115.1.8.1.8.7.1.4	Counter32	read-only	The total number of sessions deleted on this QAM channel.
d5VideoSessionQamEntry	1.3.6.1.4.1.4115.1.8.1.8.7.1		not-accessible	An entry for the video session qam table.
NUM d5VideoSessionQamIfIndex	1.3.6.1.4.1.4115.1.8.1.8.2.1.3	InterfaceIndex	read-only	The ifIndex of the output QAM used by this video session.
G32 d5VideoSessionQamMaxActiveBandwidth	1.3.6.1.4.1.4115.1.8.1.8.7.1.12	Gauge32	read-only	The high watermark for bandwidth reserved for bound and created sessions on this QAM channel.
G32 d5VideoSessionQamMaxActiveSessions	1.3.6.1.4.1.4115.1.8.1.8.7.1.11	Gauge32	read-only	The high watermark for number of bound and created sessions on this QAM channel.
C32 d5VideoSessionQamPacketInserts	1.3.6.1.4.1.4115.1.8.1.8.7.1.6	Counter32	read-only	The total number of packet inserts on this QAM channel.
NUM d5VideoSessionQamQamIfIndex	1.3.6.1.4.1.4115.1.8.1.8.7.1.1	InterfaceIndex	read-only	The ifIndex of the QAM channel used by this video session.
C32 d5VideoSessionQamQuerySessions	1.3.6.1.4.1.4115.1.8.1.8.7.1.5	Counter32	read-only	The total number of sessions queried on this QAM channel.
d5VideoSessionQamTable	1.3.6.1.4.1.4115.1.8.1.8.7		not-accessible	This table lists video session statistics for a particular QAM.
U32 d5VideoSessionQamTsid	1.3.6.1.4.1.4115.1.8.1.8.7.1.2	Unsigned32	read-only	The TSID of the QAM channel used by this video session.
C32 d5VideoSessionQamUnbindSessions	1.3.6.1.4.1.4115.1.8.1.8.7.1.8	Counter32	read-only	The total number of sessions unbound on this QAM channel.
U32 d5VideoSessionSessionGroupId	1.3.6.1.4.1.4115.1.8.1.8.2.1.9	Unsigned32	read-only	Identifies the group to which this video session belongs. A value of zero indicates that this session is not part of a group.
INT d5VideoSessionState	1.3.6.1.4.1.4115.1.8.1.8.2.1.2	INTEGER	read-only	Video session state.
d5VideoSessionTable	1.3.6.1.4.1.4115.1.8.1.8.2		not-accessible	This table lists video sessions.
U32 d5VideoSessionTimeActive	1.3.6.1.4.1.4115.1.8.1.8.2.1.7	Unsigned32	read-only	The amount of time this video session has been active in seconds.
IP d5VideoSessionTransportDestIpAddress	1.3.6.1.4.1.4115.1.8.1.8.4.1.3	InetAddress	read-only	Video session transport destination IP address. For multicast streams, this is the multicast IP address of the stream. For unicast streams, this is the IP address of the gigabit Ethernet port where the stream is received.
U32 d5VideoSessionTransportDestUdpPort	1.3.6.1.4.1.4115.1.8.1.8.4.1.4	Unsigned32	read-only	Video session transport destination UDP port.
d5VideoSessionTransportEntry	1.3.6.1.4.1.4115.1.8.1.8.4.1		not-accessible	An entry for the video session transport table.
U32 d5VideoSessionTransportGigIfIndex	1.3.6.1.4.1.4115.1.8.1.8.4.1.5	Unsigned32	read-only	Video session transport gigabit Ethernet port ifIndex.
U32 d5VideoSessionTransportId	1.3.6.1.4.1.4115.1.8.1.8.2.1.10	Unsigned32	read-only	The ID of the active transport used by this video session.
IP d5VideoSessionTransportSrcIpAddress	1.3.6.1.4.1.4115.1.8.1.8.4.1.2	InetAddress	read-only	Video session transport source IP address.
d5VideoSessionTransportTable	1.3.6.1.4.1.4115.1.8.1.8.4		not-accessible	This table lists the transports used by video sessions on the D5.
U32 d5VideoSessionTransportTransportId	1.3.6.1.4.1.4115.1.8.1.8.4.1.1	Unsigned32	read-only	Video session transport identifier.
U32 d5VideoSessionTsid	1.3.6.1.4.1.4115.1.8.1.8.2.1.4	Unsigned32	read-only	The TSID of the output QAM channel used by this video session.

RFC description

Video session display and Switched Digital Video RPC control on Arris D5 UEQ.

Start monitoring ARRIS D5 Universal Edge QAM (UEQ) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARRIS-D5-VIDEO-SESSION-MIB