All MIBs › SDLC-OPT-MIB
Category: WAN and Routing
Description: Manages SDLC link optimization parameters including compression and traffic shaping settings.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SDLC-OPT-MIB?
This is a vendor-private MIB whose object prefixes reference the "cdx6500" platform (a Codex/Cisco SDLC protocol-converter product line), covering SDLC (Synchronous Data Link Control) link optimization used in legacy SNA/mainframe connectivity. It exposes configuration-oriented objects for per-station SDLC protocol group settings, such as compression and traffic-shaping parameters used to optimize bandwidth on serial SDLC links. Because the module description is empty and few object names are available, the exact hardware/software health objects exposed cannot be fully confirmed, but station protocol group objects of this kind typically also reflect link/session status, letting administrators monitor whether SDLC optimization is active and functioning. It likely depends on underlying serial/SDLC interface indexing conventions given the station-oriented naming. It would have been deployed in legacy SNA-over-WAN environments carrying mainframe traffic across optimized serial links via Codex/Cisco 6500-series converters. Engineers can download the SDLC-OPT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SDLC-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Codex/Cisco 6500-series SDLC protocol converter
- SNA/mainframe WAN gateway
Monitoring Examples
An administrator would poll cdx6500PCTStationProtocolGroup and cdx6500PSTStationProtocolGroup to check configured SDLC compression/optimization settings for a given station; no runtime counter or table objects were included in the sample data, so a precise anomaly-detection scenario such as compression ratio or discard counts cannot be confirmed from the available object names.
What Can Be Monitored
- SDLC station protocol group configuration
- link compression/optimization settings
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises | |
| mgmt |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| codex | 1.3.6.1.4.1.449 | |||
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| cdx6500PCTSDLCPortTable | 1.3.6.1.4.1.449.2.1.2.1.1.12 | not-accessible | All of the configuration parameters relevant to the SDLC Port table. | |
| cdx6500PCTSDLCPortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.12.1 | not-accessible | A row of SDLC Port configuration parameters. | |
| INT cdx6500sdlcpCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.1 | INTEGER | read-only | Specifies a specific port (physical port number) in the node. |
| INT cdx6500sdlcpSubType | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.2 | INTEGER | read-only | This is the SDLC port subtype hpad - Host PAD. tpad - Terminal PAD. newvalHpad - same functionality as 'hpad', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcpTxCoding | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.3 | INTEGER | read-only | This is the data encoding used on the SDLC link. nrz - Non Return to Zero nrzi - Non Return to Zero Inverted newvalNrz - same functionality as 'nrz', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcpLineType | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.4 | INTEGER | read-only | Type of line, indicates whether half duplex or full duplex signals are being generated. fdx - communications occuring in both directions simultaneously between devices. hdx - transmission occuring in both directions, but only one direction at a time. This operation is not currently supported. hdxdce - (Half Duplex DCE) This is used on the HPAD when the port is a DCE and the port is interfacing directly to a FEP. The port detects RTS go HIGH, waits RTS TO CTS DELAY ms, and raises CTS. newvalHdx - same functionality as 'hdx', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcpTxType | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.5 | INTEGER | read-only | This is the transmission mode used on the line. tws - Two way Simultaneout. twa - Two Way Alternate used by most controllers. newvalTws - same functionality as 'tws', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcpSendSigDelay | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.6 | INTEGER | read-only | This object is replaced by cdx6500sdlcpHPADResponseDelay. This is a configurable delay that defines the amount of time that the HPAD delays before sending a response to the HOST. The delay is specified in milliseconds. |
| INT cdx6500sdlcpClock | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.7 | INTEGER | read-only | int - Internal clock source. ext - External clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcpClockSpeed | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.8 | INTEGER | read-only | This is the speed of the port in bits per second, when using internal clocking. |
| INT cdx6500sdlcpNumControllers | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.9 | INTEGER | read-only | This is the number of controllers (PU TYPE 1 or PU TYPE 2 devices) on the SDLC line. |
| INT cdx6500sdlcpPollTimer | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.10 | INTEGER | read-only | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds ). |
| INT cdx6500sdlcpPollFrequency | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.11 | INTEGER | read-only | Time in milliseconds between polls when no data is exchanged. |
| INT cdx6500sdlcpTries | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.12 | INTEGER | read-only | Maximum number of attempts to complete a transmission. |
| STR cdx6500sdlcpOptions | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.13 | DisplayString | read-only | Select options on this SDLC port as follows: NONE - no option specified MARKi - port uses mark idle between frame exchanges (Required by System 36 - AS/400 series) DMs - HPAD does not send DM in response to SNRM/XID received from host. After call is accepted and TPAD responds with QUA/QXID, HPAD will send UA/XID. DISCs - TPAD sends a DISC frame when station goes down. The DISC may be retransmitted up to Tries times, if the Cluster Controller does not respond, before sending a SNRM. FFBF - TPAD sends a broadcast XID. If the number of controllers configured is equal to 1 and the associated QLLC station table option is not XIDs the TPAD will poll with a broadcast address until a secondary station response address is received. |
| STR cdx6500sdlcpPortAddress | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.14 | DisplayString | read-only | When an SDLC port makes a call, this address is inserted into the calling address field. |
| STR cdx6500sdlcpPortOptions | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.15 | DisplayString | read-only | Specify any of the following port control options: NONE - no option specified MB - raise Pin 22 when the port becomes disabled |
| INT cdx6500sdlcpHPADResponseDelay | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.16 | INTEGER | read-only | This object replaces cdx6500sdlcpSendSigDelay. This is a configurable delay that defines the amount of time that the HPAD delays before sending a response to the HOST. The delay is specified in milliseconds. newvalMsec0 : same functionality as 'msec0', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcpMaxFrameSize | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.17 | INTEGER | read-only | Maximum size (in bytes) of a frame, excluding the frame header and CRC. |
| INT cdx6500sdlcpRtsCtsDelay | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.18 | INTEGER | read-only | Delay in milliseconds that the HDX DCE TPAD or the HDXDCE HPAD waits from the time it detects RTS go HIGH until the time it raises CTS. It is accurate to +/- 2 milliseconds. |
| INT cdx6500sdlcpElectricalInterfaceType | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.19 | INTEGER | read-only | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled |
| INT cdx6500sdlcpV24ElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.20 | INTEGER | read-only | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| INT cdx6500sdlcpHighSpeedElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.12.1.21 | INTEGER | read-only | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| cdx6500PCTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.3 | |||
| cdx6500SPCTSDLCStationTable | 1.3.6.1.4.1.449.2.1.2.1.3.4 | not-accessible | All of the configuration parameters relevant to the SDLC Station table. | |
| cdx6500SPCTSDLCStationEntry | 1.3.6.1.4.1.449.2.1.2.1.3.4.1 | not-accessible | A row of SDLC station configuration parameters. | |
| INT cdx6500sdlcsCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.1 | INTEGER | read-only | Refers to the physical port number. |
| INT cdx6500sdlcsCfgStationNum | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.2 | INTEGER | read-only | The number of the controller on the multidrop line. Also used for routing purposes. |
| STR cdx6500sdlcsStationAddr | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.3 | DisplayString | read-only | The station address on the multidrop line. |
| INT cdx6500sdlcsFrameWinSize | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.4 | INTEGER | read-only | Frame level window size must be set to the same value in devices at each end of the link. |
| STR cdx6500sdlcsAutocallMnem | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.5 | DisplayString | read-only | This mnemonic references the remote address which will be called when polling activity is detected on the sdlc line. |
| STR cdx6500sdlcsProtocolID | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.6 | DisplayString | read-only | The protocol identifier is the first four bytes of the call user data. If not configured the PAD will use C3000000 as the protocol ID in the call. |
| STR cdx6500sdlcsCUG | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.7 | DisplayString | read-only | The station may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except --)and separated by a comma. (e.g. 12,34,56,09,02,03). -- - No CUG Membership 00-99 - CUG Membership |
| STR cdx6500sdlcsOptions | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.8 | DisplayString | read-only | Select options on this SDLC station as follows: NONE - no option specified. CUG - check closed user group in incoming calls, and insert closed user group facility in outgoing calls. QRRs - HPAD sends QRR after QLLC link comes up XIDs - TPAD responds to QXIDs with XID configured for this station XIDs are not sent to the Cluster Controller. XID3 - HPAD and TPAD will pass XIDs transparently. This option should not be set if XIDs option is selected. Corresponding station options must be XID3. RNRs - TPAD initially polls with RNR until a data packet or an QRR is received by the QLLC station on the TPAD side. DFC - the station will wait the amount of time specified by the call timer before placing the first call. |
| STR cdx6500sdlcsStationID | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.9 | DisplayString | read-only | This is the identification sent by the TPAD in a response. to a QXID when XIDs are enabled in the QLLC Options. |
| INT cdx6500sdlcsBillingFlag | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.10 | INTEGER | read-only | This controls whether billing (accounting) records will be created for calls on this port. off - Billing (accounting) records will not be created for calls on this port. on - Billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFC1155 compatibility. |
| STR cdx6500sdlcsStnSubaddress | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.11 | DisplayString | read-only | The calling subaddress is appended to the port address to create the calling address in the autocall generated. |
| STR cdx6500sdlcsGroupAddress | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.12 | DisplayString | read-only | This is the address of the poll group to which this station belongs. Enter an address of 0x00 for no group membership. |
| STR cdx6500sdlcsX25Password | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.13 | DisplayString | read-only | Only TPAD initiated autocall packets shall use this feature. The X.25 Network Password which may be up to 12 bytes long is inserted in the CUD of the Call Request packet. Padding with spaces must be added as necessary. Configure the Protocol ID to C3 01 00 00. |
| INT cdx6500sdlcsProtectionLevel | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.14 | INTEGER | read-only | This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated to the lesser of this level and the level configured for the other end of the call. none - No protection. cpOnly - Connection protection only. fullDcp - Full data and connection protection. newvalNone - same functionality as 'none', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcsReconnectTimeout | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.15 | INTEGER | read-only | This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts. |
| INT cdx6500sdlcsReconnectLimit | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.16 | INTEGER | read-only | This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. If 0 is entered, it will not attempt to reconnect. |
| INT cdx6500sdlcsTrafficPriority | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.17 | INTEGER | read-only | This is the traffic priority of the SDLC station; low, medium, high, or expedite. newvalLowPriority : same functionality as 'lowPriority', new enumeration added for RFC1155 compatibility. |
| INT cdx6500sdlcsCallTimer | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.18 | INTEGER | read-only | This specifies the time before the next call is made. If 0 is entered, the time to the next call is handled internally. The time is in seconds. |
| INT cdx6500sdlcsIdleTimer | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.19 | INTEGER | read-only | The Link Idle Timer is used by the SNA Dial on Demand feature for determining how long the station should wait for a data frame before bringing the X.25 call down. If a 0 is entered, the call will never be brought down. The time is in seconds. |
| INT cdx6500sdlcsVerConnTimer | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.20 | INTEGER | read-only | The Verify Connection Timer is used by the SNA Dial on Demand feature for periodically verifying that the connection to the remote station is still active, after the link has been suspended. The timer specifies how long the the station waits before verifying the connection. If a 0 is entered, the connection will never be verified. The time is in seconds. |
| INT cdx6500sdlcsUnsusWaitTimer | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.21 | INTEGER | read-only | The Unsuspend Wait Timer is used by the SNA Dial on Demand feature for determining how long the station will wait in LINK-UNSUSPENDING state after receiving a call request before bringing the station down. If a 0 is entered, the station waits in LINK-UNSUSPENDED state forever. Time is in seconds. |
| INT cdx6500sdlcsMaxCallAttempts | 1.3.6.1.4.1.449.2.1.2.1.3.4.1.22 | INTEGER | read-only | The Max Call Attempts is used to specify the number of times that the SDLC stations will attempt to autocall a remote destination. A value of zero will allow unlimited attempts. |
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PPSTSDLCPortTable | 1.3.6.1.4.1.449.2.1.3.1.1.12 | not-accessible | All of the statistics parameters relevant to the SDLC Port table. | |
| cdx6500PPSTSDLCPortEntry | 1.3.6.1.4.1.449.2.1.3.1.1.12.1 | not-accessible | A row of SDLC Port statistics parameters. | |
| INT cdx6500sdlcpStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.1 | INTEGER | read-only | Specifies a specific port (physical port number) in the node. |
| INT cdx6500sdlcpPortStatus | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.2 | INTEGER | read-only | Specifies the current port status. up : At least one station is responding to polls. down : None of the stattions are responding to polls. disabled : The port is disabled by the user. newvalDisabled : same functionality as 'disabled', new enumeration added for RFc1155 compatibility. |
| INT cdx6500sdlcpPortSpeed | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.3 | INTEGER | read-only | The measured port speed in bits per second. |
| CTR cdx6500sdlcpCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.4 | Counter | read-only | Total number of characters received until now, not including all SDLC header characters. |
| CTR cdx6500sdlcpCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.5 | Counter | read-only | Total number of characters transmitted until now, not including all SDLC header characters. |
| INT cdx6500sdlcpCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.6 | INTEGER | read-only | The average number of characters received per second during the previous minute. |
| INT cdx6500sdlcpCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.7 | INTEGER | read-only | The average number of characters transmitted per second during the previous minute. |
| CTR cdx6500sdlcpFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.8 | Counter | read-only | Total number of SDLC frames received until now. |
| CTR cdx6500sdlcpFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.9 | Counter | read-only | The total number of SDLC frames transmitted until now. |
| INT cdx6500sdlcpFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.10 | INTEGER | read-only | The average number of frames received per second during the previous minute. |
| INT cdx6500sdlcpFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.11 | INTEGER | read-only | The average number of frames transmitted per second during the previous minute. |
| STR cdx6500sdlcpStateChange | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.12 | DisplayString | read-only | The date and time when the link entered the current state. |
| NUM cdx6500sdlcpLinkDowns | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.13 | Counter16 | read-only | Total number of times link has made a transition from the UP state to the DOWN state. |
| INT cdx6500sdlcpUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.14 | INTEGER | read-only | Indicates a percentage of the link resources currently in use in the IN(from the line to the port) direction. |
| INT cdx6500sdlcpUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.15 | INTEGER | read-only | Indicates a percentage of the link resources currently in use in the OUT(from the port to the line) direction. |
| NUM cdx6500sdlcpOverrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.16 | Counter16 | read-only | Total number of overrun errors counted by the I/O driver. Overrun errors occur when received data is lost because it cannot be processed by the CPU. |
| NUM cdx6500sdlcpUnderrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.17 | Counter16 | read-only | Total number of underrun errors counted by the I/O driver. Underrun errors occur when the transmission of a frame cannot be completed because of momentary CPU overload. |
| NUM cdx6500sdlcpCRCErrors | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.18 | Counter16 | read-only | Total number of CRC errors counted by the I/O driver. |
| INT cdx6500sdlcpPacketsQueued | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.19 | INTEGER | read-only | Total number of packets queued at the SDLC protocol layer by the transmitter. |
| CTR cdx6500sdlcpRRInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.20 | Counter | read-only | Total number of RR frames received until the present time. |
| CTR cdx6500sdlcpRROutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.21 | Counter | read-only | Total number of RR frames transmitted until the present time. |
| CTR cdx6500sdlcpRNRInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.22 | Counter | read-only | Total number of RNR frames received until the present time. |
| CTR cdx6500sdlcpRNROutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.23 | Counter | read-only | Total number of RNR frames transmitted until the present time. |
| CTR cdx6500sdlcpSNRMInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.24 | Counter | read-only | Total number of SNRM frames received until the present time. |
| CTR cdx6500sdlcpSNRMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.25 | Counter | read-only | Total number of SNRM frames transmitted until the present time. |
| CTR cdx6500sdlcpUAInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.26 | Counter | read-only | Total number of UA frames received until the present time. |
| CTR cdx6500sdlcpUAOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.27 | Counter | read-only | Total number of UA frames transmitted until the present time. |
| CTR cdx6500sdlcpDMInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.28 | Counter | read-only | Total number of DM frames received until the present time. |
| CTR cdx6500sdlcpDMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.29 | Counter | read-only | Total number of DM frames transmitted until the present time. |
| CTR cdx6500sdlcpXIDInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.30 | Counter | read-only | Total number of XID frames received until the present time. |
| CTR cdx6500sdlcpXIDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.31 | Counter | read-only | Total number of XID frames transmitted until the present time. |
| CTR cdx6500sdlcpREJInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.32 | Counter | read-only | Total number of REJ frames received until the present time. |
| CTR cdx6500sdlcpREJOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.33 | Counter | read-only | Total number of REJ frames transmitted until the present time. |
| CTR cdx6500sdlcpDISCInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.34 | Counter | read-only | Total number of DISC frames received until the present time. |
| CTR cdx6500sdlcpDISCOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.35 | Counter | read-only | Total number of DISC frames transmitted until the present time. |
| CTR cdx6500sdlcpRDInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.36 | Counter | read-only | Total number of RD frames received until the present time. |
| CTR cdx6500sdlcpRDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.37 | Counter | read-only | Total number of RD frames transmitted until the present time. |
| CTR cdx6500sdlcpFRMRInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.38 | Counter | read-only | Total number of FRMR frames received until the present time. |
| CTR cdx6500sdlcpFRMROutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.39 | Counter | read-only | Total number of FRMR frames transmitted until the present time. |
| CTR cdx6500sdlcpUPInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.40 | Counter | read-only | Total number of UP frames received until the present time. |
| CTR cdx6500sdlcpUPOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.41 | Counter | read-only | Total number of UP frames transmitted until the present time. |
| CTR cdx6500sdlcpTESTInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.42 | Counter | read-only | Total number of TEST frames received until the present time. |
| CTR cdx6500sdlcpTESTOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.43 | Counter | read-only | Total number of TEST frames transmitted until the present time. |
| CTR cdx6500sdlcpXIDNullInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.44 | Counter | read-only | Total number of XID Null frames received until the present time. |
| CTR cdx6500sdlcpXIDNullOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.45 | Counter | read-only | Total number of XID Null frames transmitted until the present time. |
| CTR cdx6500sdlcpXID0InFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.46 | Counter | read-only | Total number of XID Type 0 frames received until the present time. |
| CTR cdx6500sdlcpXID0OutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.47 | Counter | read-only | Total number of XID Type 0 frames transmitted until the present time. |
| CTR cdx6500sdlcpXID1InFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.48 | Counter | read-only | Total number of XID Type 1 frames received until the present time. |
| CTR cdx6500sdlcpXID1OutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.49 | Counter | read-only | Total number of XID Type 1 frames transmitted until the present time. |
| CTR cdx6500sdlcpXID3InFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.50 | Counter | read-only | Total number of XID Type 3 frames received until the present time. |
| CTR cdx6500sdlcpXID3OutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.12.1.51 | Counter | read-only | Total number of XID Type 3 frames transmitted until the present time. |
| cdx6500PSTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.3 | |||
| cdx6500SPSTSDLCStationTable | 1.3.6.1.4.1.449.2.1.3.1.3.4 | not-accessible | All of the statistics parameters relevant to the SDLC Station table. | |
| cdx6500SPSTSDLCStationEntry | 1.3.6.1.4.1.449.2.1.3.1.3.4.1 | not-accessible | A row of SDLC station Statistics parameters. | |
| INT cdx6500sdlcsStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.1 | INTEGER | read-only | Refers to the physical port number. |
| INT cdx6500sdlcsStatsStationNum | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.2 | INTEGER | read-only | Station reference number. |
| INT cdx6500sdlcsStatsStationAddr | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.3 | INTEGER | read-only | Configured station address. |
| STR cdx6500sdlcsQLLCState | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.4 | DisplayString | read-only | Indicates the status of the QLLC layer: INOPERATIVE : No connection exists with the station. LINK-CLOSED : X.25 call is connected, but there has been no successful QXID exchange and data cannot pass. LINK-OPENING: The X.25 call is connected and there has been a successful QXID exchange. However, there has been no QUA or QDM response to a QSM command. LINK-OPENED : X.25 call is connected and data is passing. LINK-CLOSING: Disconnect in process. Station may come back up after an SVC clear or PVC reset. If it does not, boot the station to clear it. LINK-RECOVERY: X.25 call is connected and the station has sent a QFRMR packet over the link. Station may come back up after SVC clear or PVC reset. If it does not recover, boot the station to clear it. NOTE: This value is not supported by the 6500. |
| CTR cdx6500sdlcsCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.5 | Counter | read-only | Total number of characters received until now, not including SDLC header characters. |
| CTR cdx6500sdlcsCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.6 | Counter | read-only | Total number of characters transmitted until now, not including SDLC header characters. |
| INT cdx6500sdlcsCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.7 | INTEGER | read-only | The average number of characters received per second during the previous minute. |
| INT cdx6500sdlcsCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.8 | INTEGER | read-only | The average number of characters transmitted per second during the previous minute. |
| CTR cdx6500sdlcsFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.9 | Counter | read-only | Total number of frames received. |
| CTR cdx6500sdlcsFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.10 | Counter | read-only | Total number of frames transmitted. |
| INT cdx6500sdlcsFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.11 | INTEGER | read-only | The average number of frames received per second during the previous minute. |
| INT cdx6500sdlcsFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.12 | INTEGER | read-only | The average number of frames transmitted per second during the previous minute. |
| NUM cdx6500sdlcsQRRInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.13 | Counter16 | read-only | Total number of QRR packets received until now. |
| NUM cdx6500sdlcsQRROutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.14 | Counter16 | read-only | Total number of QRR packets transmitted until now. |
| INT cdx6500sdlcsUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.15 | INTEGER | read-only | Indicates a percentage of the link resources currently in use in the IN(from the line to the port) direction. |
| INT cdx6500sdlcsUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.16 | INTEGER | read-only | Indicates a percentage of the link resources currently in use in the OUT(from the port to the line) direction. |
| INT cdx6500sdlcsPacketsQueued | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.17 | INTEGER | read-only | Total number of packets queued at the SDLC protocol layer by the transmitter. |
| CTR cdx6500sdlcsRRInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.18 | Counter | read-only | Total number of RR frames received until the present time. |
| CTR cdx6500sdlcsRROutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.19 | Counter | read-only | Total number of RR frames transmitted until the present time. |
| CTR cdx6500sdlcsRNRInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.20 | Counter | read-only | Total number of RNR frames received until the present time. |
| CTR cdx6500sdlcsRNROutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.21 | Counter | read-only | Total number of RNR frames transmitted until the present time. |
| CTR cdx6500sdlcsSNRMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.22 | Counter | read-only | Total number of SNRM frames received until the present time. |
| CTR cdx6500sdlcsSNRMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.23 | Counter | read-only | Total number of SNRM frames transmitted until the present time. |
| CTR cdx6500sdlcsUAInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.24 | Counter | read-only | Total number of UA frames received until the present time. |
| CTR cdx6500sdlcsUAOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.25 | Counter | read-only | Total number of UA frames transmitted until the present time. |
| CTR cdx6500sdlcsDMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.26 | Counter | read-only | Total number of DM frames received until the present time. |
| CTR cdx6500sdlcsDMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.27 | Counter | read-only | Total number of DM frames transmitted until the present time. |
| CTR cdx6500sdlcsXIDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.28 | Counter | read-only | Total number of XID frames received until the present time. |
| CTR cdx6500sdlcsXIDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.29 | Counter | read-only | Total number of XID frames transmitted until the present time. |
| CTR cdx6500sdlcsREJInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.30 | Counter | read-only | Total number of REJ frames received until the present time. |
| CTR cdx6500sdlcsREJOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.31 | Counter | read-only | Total number of REJ frames transmitted until the present time. |
| CTR cdx6500sdlcsDISCInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.32 | Counter | read-only | Total number of DISC frames received until the present time. |
| CTR cdx6500sdlcsDISCOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.33 | Counter | read-only | Total number of DISC frames transmitted until the present time. |
| CTR cdx6500sdlcsRDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.34 | Counter | read-only | Total number of RD frames received until the present time. |
| CTR cdx6500sdlcsRDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.35 | Counter | read-only | Total number of RD frames transmitted until the present time. |
| CTR cdx6500sdlcsFRMRInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.36 | Counter | read-only | Total number of FRMR frames received until the present time. |
| CTR cdx6500sdlcsFRMROutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.37 | Counter | read-only | Total number of FRMR frames transmitted until the present time. |
| CTR cdx6500sdlcsUPInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.38 | Counter | read-only | Total number of UP frames received until the present time. |
| CTR cdx6500sdlcsUPOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.39 | Counter | read-only | Total number of UP frames transmitted until the present time. |
| CTR cdx6500sdlcsTESTInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.40 | Counter | read-only | Total number of TEST frames received until the present time. |
| CTR cdx6500sdlcsTESTOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.41 | Counter | read-only | Total number of TEST frames transmitted until the present time. |
| NUM cdx6500sdlcsQSMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.42 | Counter16 | read-only | Total number of QSM packets received until the present time. |
| NUM cdx6500sdlcsQSMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.43 | Counter16 | read-only | Total number of QSM packets transmitted until the present time. |
| NUM cdx6500sdlcsQUAInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.44 | Counter16 | read-only | Total number of QUA packets received until the present time. |
| NUM cdx6500sdlcsQUAOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.45 | Counter16 | read-only | Total number of QUA packets transmitted until the present time. |
| NUM cdx6500sdlcsQRDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.46 | Counter16 | read-only | Total number of QRD packets received until the present time. |
| NUM cdx6500sdlcsQRDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.47 | Counter16 | read-only | Total number of QRD packets transmitted until the present time. |
| NUM cdx6500sdlcsQFRMRInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.48 | Counter16 | read-only | Total number of QFRMR packets received until the present time. |
| NUM cdx6500sdlcsQFRMROutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.49 | Counter16 | read-only | Total number of QFRMR packets transmitted until the present time. |
| NUM cdx6500sdlcsQXIDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.50 | Counter16 | read-only | Total number of QXID packets received until the present time. |
| NUM cdx6500sdlcsQXIDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.51 | Counter16 | read-only | Total number of QXID packets transmitted until the present time. |
| NUM cdx6500sdlcsQDCInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.52 | Counter16 | read-only | Total number of QDC packets received until the present time. |
| NUM cdx6500sdlcsQDCOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.53 | Counter16 | read-only | Total number of QDC packets transmitted until the present time. |
| NUM cdx6500sdlcsQDMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.54 | Counter16 | read-only | Total number of QDM packets received until the present time. |
| NUM cdx6500sdlcsQDMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.55 | Counter16 | read-only | Total number of QDM packets transmitted until the present time. |
| NUM cdx6500sdlcsQTESTInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.56 | Counter16 | read-only | Total number of QTEST packets received until the present time. |
| NUM cdx6500sdlcsQTESTOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.57 | Counter16 | read-only | Total number of QTEST packets transmitted until the present time. |
| NUM cdx6500sdlcsQSSInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.58 | Counter16 | read-only | Total number of QSS packets received until the present time. |
| NUM cdx6500sdlcsQSSOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.59 | Counter16 | read-only | Total number of QSS packets transmitted until the present time. |
| NUM cdx6500sdlcsQRSInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.60 | Counter16 | read-only | Total number of QRS packets received until the present time. |
| NUM cdx6500sdlcsQRSOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.61 | Counter16 | read-only | Total number of QRS packets transmitted until the present time. |
| CTR cdx6500sdlcsXIDNullInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.62 | Counter | read-only | Total number of XID Null frames received until the present time. |
| CTR cdx6500sdlcsXIDNullOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.63 | Counter | read-only | Total number of XID Null frames transmitted until the present time. |
| CTR cdx6500sdlcsXID0InFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.64 | Counter | read-only | Total number of XID Type 0 frames received until the present time. |
| CTR cdx6500sdlcsXID0OutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.65 | Counter | read-only | Total number of XID Type 0 frames transmitted until the present time. |
| CTR cdx6500sdlcsXID1InFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.66 | Counter | read-only | Total number of XID Type 1 frames received until the present time. |
| CTR cdx6500sdlcsXID1OutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.67 | Counter | read-only | Total number of XID Type 1 frames transmitted until the present time. |
| CTR cdx6500sdlcsXID3InFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.68 | Counter | read-only | Total number of XID Type 3 frames received until the present time. |
| CTR cdx6500sdlcsXID3OutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.69 | Counter | read-only | Total number of XID Type 3 frames transmitted until the present time. |
| INT cdx6500sdlcsVSNumber | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.70 | INTEGER | read-only | Next VS seuqunce number this station expects. |
| INT cdx6500sdlcsVRNumber | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.71 | INTEGER | read-only | Next VR seuqunce number this station expects. |
| INT cdx6500sdlcsNRNumber | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.72 | INTEGER | read-only | Next NR seuqunce number this station expects. |
| INT cdx6500sdlcsNSNumber | 1.3.6.1.4.1.449.2.1.3.1.3.4.1.73 | INTEGER | read-only | Next NS seuqunce number this station expects. |
| cdx6500Controls | 1.3.6.1.4.1.449.2.1.4 | |||
| cdx6500ContSDLC | 1.3.6.1.4.1.449.2.1.4.5 | |||
| cdx6500ContSDLCStationTable | 1.3.6.1.4.1.449.2.1.4.5.1 | not-accessible | All of the control parameters relevant to the SDLC Station table. | |
| cdx6500ContSDLCStationEntry | 1.3.6.1.4.1.449.2.1.4.5.1.1 | not-accessible | A row of SDLC Station Control parameters. | |
| INT cdx6500sdlcsContPortNum | 1.3.6.1.4.1.449.2.1.4.5.1.1.1 | INTEGER | not-accessible | Refers to the physical port number. |
| INT cdx6500sdlcsContStationNum | 1.3.6.1.4.1.449.2.1.4.5.1.1.2 | INTEGER | not-accessible | Station reference number. |
| INT cdx6500sdlcsContBootStation | 1.3.6.1.4.1.449.2.1.4.5.1.1.3 | INTEGER | write-only | Boots the specified SDLC station. boot - Boot Station noBoot - Do not boot Station |
| INT cdx6500sdlcsContDisableStation | 1.3.6.1.4.1.449.2.1.4.5.1.1.4 | INTEGER | write-only | Disables the specified SDLC station. disable - Disable Station. noDisable - Do not disable Station. |
| INT cdx6500sdlcsContEnableStation | 1.3.6.1.4.1.449.2.1.4.5.1.1.5 | INTEGER | write-only | Enables the specified SDLC station. enable - Enable Station. noEnable - Not not enable Station. |
| INT cdx6500sdlcsContBusyOutStation | 1.3.6.1.4.1.449.2.1.4.5.1.1.6 | INTEGER | write-only | This operation is no longer supported. Busy out the specified SDLC station. busyOut - Busyout Station. noBusyOut - Do not busyout Station. |
| INT cdx6500sdlcsContResetStnStats | 1.3.6.1.4.1.449.2.1.4.5.1.1.7 | INTEGER | write-only | Resets statistics for the specified SDLC station reset - Reset Station Statistics noReset - Do not reset Station Statistics |
RFC description
Configuration and statistics MIB for SDLC (Synchronous Data Link Control) protocol on Codex routers.
Start monitoring Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.