SDLC-OPT-MIB :: cdx6500sdlcpOptions

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SDLC-OPT-MIB › cdx6500sdlcpOptions

cdx6500sdlcpOptions

Module: SDLC-OPT-MIB

OID (symbolic): SDLC-OPT-MIB::cdx6500sdlcpOptions

OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.12.1.13

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: Select options on this SDLC port as follows: NONE - no option specified MARKi - port uses mark idle between frame exchanges (Required by System 36 - AS/400 series) DMs - HPAD does not send DM in response to SNRM/XID received from host. After call is accepted and TPAD responds with QUA/QXID, HPAD will send UA/XID. DISCs - TPAD sends a DISC frame when station goes down. The DISC may be retransmitted up to Tries times, if the Cluster Controller does not respond, before sending a SNRM. FFBF - TPAD sends a broadcast XID. If the number of controllers configured is equal to 1 and the associated QLLC station table option is not XIDs the TPAD will poll with a broadcast address until a secondary station response address is received.

What is cdx6500sdlcpOptions?

A short code string selecting port-level behavior options such as MARKi (mark idle between frames, required for System/36-AS/400), DMs (suppress DM response to SNRM/XID), DISCs (send DISC when a station goes down), or FFBF (broadcast XID). Admins read this to see which of these special-case behaviors are enabled on the port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.12.1.13
snmpwalk -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcpOptions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.12.1.13.1
snmpget -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcpOptions.1

Start monitoring Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDLC-OPT-MIB::cdx6500sdlcpOptions OID value, configure state conditions and alerts, and monitor any Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1cdx6500CfgProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1cdx6500PCTPortProtocolGroupALC-OPT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.1.1.12cdx6500PCTSDLCPortTableSDLC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.12.1cdx6500PCTSDLCPortEntrySDLC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.12.1.13cdx6500sdlcpOptionsSDLC-OPT-MIB