SCA-BOX-MIB

All MIBs › SCA-BOX-MIB

Category: Securicor WAN Router Management, WAN and Routing

Description: Manages Securicor WAN router chassis configuration, hardware inventory, and power status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SCA-BOX-MIB?

SCA-BOX-MIB is a legacy proprietary MIB (built on SCANET-MIB) reporting chassis LED-coded status (traffic-status, card-status, and service LEDs with color-coded on/off/red/green/yellow states) and board inventory. Its objects cover fan/power/slot/slot-map/temperature presence and fail flags, and a board-info table (board number, card type, PCB revision, MAC address, driver sequence, product, serial number, master/slave role, RAM/shared-RAM size). As a hardware-status MIB it lets an administrator confirm fan/power/temperature health and card-type inventory across chassis slots on this legacy device. It is deployed on legacy chassis equipment (SCANET-MIB vendor line). Engineers can download the SCA-BOX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SCA-BOX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy chassis equipment (SCANET-MIB vendor line)

Monitoring Examples

An administrator checks psuFail and brdInfoTable to confirm power-supply health and card inventory across a chassis on this legacy device.

What Can Be Monitored

chassis LED-coded status and board hardware inventory

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString

From SCANET-MIB

scanet

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
box	1.3.6.1.4.1.208.3
NTF boxPowerFailureEvent	1.3.6.1.4.1.208.3.0.1			This trap is sent when a power supply failure has been detected. The variable indicates the failing power supply.
NTF boxFanFailureEvent	1.3.6.1.4.1.208.3.0.2			This trap is sent when a fan failure has been detected.
NTF boxTempFailureEvent	1.3.6.1.4.1.208.3.0.3			This trap is sent when a temperature sensor has detected excessive temperature in the enclosure.
NTF boxModuleInsertedEvent	1.3.6.1.4.1.208.3.0.4			This trap is sent when a module is inserted in the the enclosure. The variable slotmapFail indicates in which slot a module is inserted
NTF boxModuleRemovedEvent	1.3.6.1.4.1.208.3.0.5			This trap is sent when a module is removed in the the enclosure. The variable slotmapFail indicates in which slot a module is removed
enclosure	1.3.6.1.4.1.208.3.1
OCT led	1.3.6.1.4.1.208.3.1.1	OCTET STRING	read-only	ts-xxxx 0 : red off(0),red(1) 1 : green off(0),green(2) cs-xxxx 0 : fault off(0),red(1) 1 : master off(0),green(2) 2 : test1 off(0),yellow(4) 3 : test2 off(0),yellow(4) 4 : test3 off(0),yellow(4) 5 : test4 off(0),yellow(4) 6 : rx/tx off(0),green(2) se-xxxx 0 : fault off(0),red(1) 1 : power off(0),green(2) 2 : status1 off(0),red(1),green(2),yellow(4) 3 : status2 off(0),red(1),green(2),yellow(4) 4 : status3 off(0),red(1),green(2),yellow(4) 5 : status4 off(0),red(1),green(2),yellow(4) 6 : status5 off(0),red(1),green(2),yellow(4) Note. Lower 3 bits indicates off/color (off(0),red(1), green(2),yellow(4)), Higher 5 bits reserved for flash frequency.
INT fan	1.3.6.1.4.1.208.3.1.2	INTEGER	read-only	If this object returns 1 then a Fan has failed.
INT power	1.3.6.1.4.1.208.3.1.3	INTEGER	read-only	If this object returns a non-zero value then one or more power supplies have failed.
INT slots	1.3.6.1.4.1.208.3.1.4	INTEGER	read-only	The number of slots in the enclosure.
OCT slotmap	1.3.6.1.4.1.208.3.1.5	OCTET STRING	read-only	A bitmap of the slots in which a card is present. Setting bit0 to 1 indicates that a card is present in slot 1, and so on.
INT temperature	1.3.6.1.4.1.208.3.1.6	INTEGER	read-only	If this object returns 1 then a temperature sensor has detected an excessive temperature in the enclosure.
INT fanNo	1.3.6.1.4.1.208.3.1.7	INTEGER	read-only	Total number of fans supported.
INT powerNo	1.3.6.1.4.1.208.3.1.8	INTEGER	read-only	Total number of power supplies supported.
INT temperatureNo	1.3.6.1.4.1.208.3.1.9	INTEGER	read-only	A return value of 1 indicates that temperature sensors are supported in the enclosure.
INT fanPresent	1.3.6.1.4.1.208.3.1.10	INTEGER	read-only	A bitmask of the fans that are present. Bit0 refers to fan 1, bit 1 to fan 2, etc.
INT powerPresent	1.3.6.1.4.1.208.3.1.11	INTEGER	read-only	A bitmask of the power supples that are present. Bit0 refers to power supply 1, bit 1 to power supply 2, etc.
INT temperaturePresent	1.3.6.1.4.1.208.3.1.12	INTEGER	read-only	A return value of 1 indicates that temperature sensors are present in the enclosure.
INT psuFail	1.3.6.1.4.1.208.3.1.13	INTEGER	not-accessible	This object returns a non-zero value in a trap according to the power supply number when a power supply have failed.
INT slotmapFail	1.3.6.1.4.1.208.3.1.14	INTEGER	not-accessible	This object returns a non-zero value in a trap according to the slot number when a card is enabled or disabled in the system center
boards	1.3.6.1.4.1.208.3.2
brdInfoTable	1.3.6.1.4.1.208.3.2.1		not-accessible
brdInfoEntry	1.3.6.1.4.1.208.3.2.1.1		not-accessible	Info from 32 bytes standard memory area.
INT brdNumber1	1.3.6.1.4.1.208.3.2.1.1.1	INTEGER	read-only	Board Sequence number in enclosure (= slot number)
INT cardType	1.3.6.1.4.1.208.3.2.1.1.2	INTEGER	read-only	Unique 16 bit card type This ID is used for unique sw identification of the card. The list of possible return values is company private.
INT pcbRevision	1.3.6.1.4.1.208.3.2.1.1.3	INTEGER	read-only	PCB Revision number
OCT macAddress	1.3.6.1.4.1.208.3.2.1.1.4	OCTET STRING	read-only	The Base MAC-Address allocated for MAC Interfaces on the board.
INT driverSeq	1.3.6.1.4.1.208.3.2.1.1.5	INTEGER	read-only	Required driver sequence number (SW)
STR product	1.3.6.1.4.1.208.3.2.1.1.6	DisplayString	read-only	Product Identification.
OCT serialNumber	1.3.6.1.4.1.208.3.2.1.1.7	OCTET STRING	read-only	Production serial number
INT masterSlave	1.3.6.1.4.1.208.3.2.1.1.8	INTEGER	read-only	The board backplane bus properties.
INT ram	1.3.6.1.4.1.208.3.2.1.1.9	INTEGER	read-only
INT shram	1.3.6.1.4.1.208.3.2.1.1.10	INTEGER	read-only
INT eprom	1.3.6.1.4.1.208.3.2.1.1.11	INTEGER	read-only
INT e2prom	1.3.6.1.4.1.208.3.2.1.1.12	INTEGER	read-only
INT flashprom	1.3.6.1.4.1.208.3.2.1.1.13	INTEGER	read-only
OCT spec0	1.3.6.1.4.1.208.3.2.1.1.14	OCTET STRING	read-only	Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
OCT spec1	1.3.6.1.4.1.208.3.2.1.1.15	OCTET STRING	read-only	Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
OCT spec2	1.3.6.1.4.1.208.3.2.1.1.16	OCTET STRING	read-only	Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
OCT spec3	1.3.6.1.4.1.208.3.2.1.1.17	OCTET STRING	read-only	Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
IP ipAddr	1.3.6.1.4.1.208.3.2.1.1.18	IpAddress	read-only	IP Address to Manage Board in this slot
OCT nsap	1.3.6.1.4.1.208.3.2.1.1.19	OCTET STRING	read-only	NSAP to Manage Board in this slot
brdStatusTable	1.3.6.1.4.1.208.3.2.2		not-accessible
brdStatusEntry	1.3.6.1.4.1.208.3.2.2.1		not-accessible	Status information from boards.
INT brdNumber2	1.3.6.1.4.1.208.3.2.2.1.1	INTEGER	read-only	Board Sequence number in enclosure (= slot number)
INT brdStatus	1.3.6.1.4.1.208.3.2.2.1.2	INTEGER	read-only	Board Status byte. bit0 - reserved bit1 Card Failed bit2 - reserved bit3 - reserved bit4 Red component of Status LED (active low) bit5 Green component of Status LED (active low) bit6 - reserved bit7 - reserved
OCT brdLed	1.3.6.1.4.1.208.3.2.2.1.3	OCTET STRING	read-only	Depends on the card type. Note. Lower 3 bits indicates off/color (off(0),red(1), green(2),yellow(4)), Higher 5 bits reserved for flash frequency.
brdPlugTable	1.3.6.1.4.1.208.3.2.3		not-accessible	Table of plugs (and the possibly attached pims) on the board
brdPlugEntry	1.3.6.1.4.1.208.3.2.3.1		not-accessible	Information about plugs on boards.
INT brdNumber3	1.3.6.1.4.1.208.3.2.3.1.1	INTEGER	read-only	Board Sequence number in enclosure (= slot number)
INT brdPlugNumber	1.3.6.1.4.1.208.3.2.3.1.2	INTEGER	read-only	Plug Number - used to index plugs on board.
OCT brdPlugPosition	1.3.6.1.4.1.208.3.2.3.1.3	OCTET STRING	read-only	Position/name of plug on board.
INT brdPlugStatus	1.3.6.1.4.1.208.3.2.3.1.4	INTEGER	read-only	Availability of plug on this hardware revision
OCT brdPlugType	1.3.6.1.4.1.208.3.2.3.1.5	OCTET STRING	read-only	Type of plug
OCT brdPlugPimType	1.3.6.1.4.1.208.3.2.3.1.6	OCTET STRING	read-only	Type of pim inserted in plug
OCT brdPlugPimLeds	1.3.6.1.4.1.208.3.2.3.1.7	OCTET STRING	read-only	Status of LEDs on pim in plug
OCT brdPlugPimOptions	1.3.6.1.4.1.208.3.2.3.1.8	OCTET STRING	read-only	Textual description of any options installed on pim in plug
brdOptionTable	1.3.6.1.4.1.208.3.2.4		not-accessible	Table of various possible board options. Options might be sub-boards or other kinds of hardware options.
brdOptionEntry	1.3.6.1.4.1.208.3.2.4.1		not-accessible	Information about board options.
INT brdNumber4	1.3.6.1.4.1.208.3.2.4.1.1	INTEGER	read-only	Board Sequence number in enclosure (= slot number)
INT brdOptionNumber	1.3.6.1.4.1.208.3.2.4.1.2	INTEGER	read-only	Option Number - used to index options on board. If options is visible on front panel, they must be sorted (top-most/left-most first).
OCT brdOptionName	1.3.6.1.4.1.208.3.2.4.1.3	OCTET STRING	read-only	Descriptive Name of option.
INT brdOptionState	1.3.6.1.4.1.208.3.2.4.1.4	INTEGER	read-only	Is the option installed ?
brdSwitchSettingTable	1.3.6.1.4.1.208.3.2.5		not-accessible	Table of switch settings on the board.
brdSwitchSettingEntry	1.3.6.1.4.1.208.3.2.5.1		not-accessible	Information about Switch Setting
INT brdNumber5	1.3.6.1.4.1.208.3.2.5.1.1	INTEGER	read-only	Board Sequence number in enclosure (= slot number)
INT brdSwitchNumber	1.3.6.1.4.1.208.3.2.5.1.2	INTEGER	read-only	Switch Number - used to index switches on board.
OCT brdSwitchName	1.3.6.1.4.1.208.3.2.5.1.3	OCTET STRING	read-only	Descriptive Name - used to identify switch on board.
OCT brdSwitchSetting	1.3.6.1.4.1.208.3.2.5.1.4	OCTET STRING	read-only	Descriptive Name - used to describe switch setting on board. Eg. 'On', 'Off', 'Enabled', 'Disabled', '0', '01001100', 'A', 'B', 'C', 'Open', 'Closed', 'Inserted', 'Not inserted', etc.

RFC description

Intel Box MIB for managing SCA-based enclosure and board hardware components, LED status, and front panel monitoring.

Start monitoring legacy chassis equipment, SCANET-MIB vendor line (fan/power/temperature/card-inventory status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SCA-BOX-MIB

What Is SCA-BOX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description