All MIBs › SDLC-OPT-MIB › cdx6500sdlcsOptions
cdx6500sdlcsOptions
Module: SDLC-OPT-MIB
OID (symbolic): SDLC-OPT-MIB::cdx6500sdlcsOptions
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.3.4.1.8
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Select options on this SDLC station as follows: NONE - no option specified. CUG - check closed user group in incoming calls, and insert closed user group facility in outgoing calls. QRRs - HPAD sends QRR after QLLC link comes up XIDs - TPAD responds to QXIDs with XID configured for this station XIDs are not sent to the Cluster Controller. XID3 - HPAD and TPAD will pass XIDs transparently. This option should not be set if XIDs option is selected. Corresponding station options must be XID3. RNRs - TPAD initially polls with RNR until a data packet or an QRR is received by the QLLC station on the TPAD side. DFC - the station will wait the amount of time specified by the call timer before placing the first call.
What is cdx6500sdlcsOptions?
A short code string selecting station-level behavior such as CUG (enforce closed user group checking), QRRs (send QRR after link comes up), XIDs (respond to QXID locally without forwarding), XID3 (pass XIDs through transparently), RNRs (poll with RNR until data or QRR arrives), or DFC (delay first call). Admins read this to see which special SDLC-to-X.25 behaviors are active for the station.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.3.4.1.8 snmpwalk -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcsOptions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.3.4.1.8.1 snmpget -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcsOptions.1
Start monitoring Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDLC-OPT-MIB::cdx6500sdlcsOptions OID value, configure state conditions and alerts, and monitor any Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.3 | cdx6500PCTStationProtocolGroup | ATM-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.3.4 | cdx6500SPCTSDLCStationTable | SDLC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1 | cdx6500SPCTSDLCStationEntry | SDLC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.8 | cdx6500sdlcsOptions | SDLC-OPT-MIB |