All MIBs › SDLC-OPT-MIB › cdx6500sdlcsQLLCState
cdx6500sdlcsQLLCState
Module: SDLC-OPT-MIB
OID (symbolic): SDLC-OPT-MIB::cdx6500sdlcsQLLCState
OID (numeric): 1.3.6.1.4.1.449.2.1.3.1.3.4.1.4
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Indicates the status of the QLLC layer: INOPERATIVE : No connection exists with the station. LINK-CLOSED : X.25 call is connected, but there has been no successful QXID exchange and data cannot pass. LINK-OPENING: The X.25 call is connected and there has been a successful QXID exchange. However, there has been no QUA or QDM response to a QSM command. LINK-OPENED : X.25 call is connected and data is passing. LINK-CLOSING: Disconnect in process. Station may come back up after an SVC clear or PVC reset. If it does not, boot the station to clear it. LINK-RECOVERY: X.25 call is connected and the station has sent a QFRMR packet over the link. Station may come back up after SVC clear or PVC reset. If it does not recover, boot the station to clear it. NOTE: This value is not supported by the 6500.
What is cdx6500sdlcsQLLCState?
The current state of the QLLC (Qualified Logical Link Control) layer for this station's X.25 connection: INOPERATIVE (no connection), LINK-CLOSED (call up but no QXID exchange), LINK-OPENING (QXID done, awaiting QUA/QDM), LINK-OPENED (data flowing), LINK-CLOSING (disconnecting), or LINK-RECOVERY (station sent a QFRMR, may need a manual boot to clear). The MIB notes this value is not actually supported on the 6500, so admins should not rely on it for that platform.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.3.4.1.4 snmpwalk -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcsQLLCState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.3.4.1.4.1 snmpget -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcsQLLCState.1
Start monitoring Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDLC-OPT-MIB::cdx6500sdlcsQLLCState OID value, configure state conditions and alerts, and monitor any Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3 | cdx6500Statistics | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1 | cdx6500StatProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.3 | cdx6500PSTStationProtocolGroup | ATM-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.3.1.3.4 | cdx6500SPSTSDLCStationTable | SDLC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1 | cdx6500SPSTSDLCStationEntry | SDLC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.4 | cdx6500sdlcsQLLCState | SDLC-OPT-MIB |