All MIBs › SDLC-OPT-MIB › cdx6500sdlcpLineType
cdx6500sdlcpLineType
Module: SDLC-OPT-MIB
OID (symbolic): SDLC-OPT-MIB::cdx6500sdlcpLineType
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.12.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Type of line, indicates whether half duplex or full duplex signals are being generated. fdx - communications occuring in both directions simultaneously between devices. hdx - transmission occuring in both directions, but only one direction at a time. This operation is not currently supported. hdxdce - (Half Duplex DCE) This is used on the HPAD when the port is a DCE and the port is interfacing directly to a FEP. The port detects RTS go HIGH, waits RTS TO CTS DELAY ms, and raises CTS. newvalHdx - same functionality as 'hdx', new enumeration added for RFC1155 compatibility.
What is cdx6500sdlcpLineType?
Indicates whether the port is running full duplex (fdx), half duplex (hdx), or half-duplex DCE (hdxdce, used when the port acts as DCE facing a FEP). An admin uses this to confirm the port's duplex mode matches what the attached device expects before chasing other causes of poor throughput.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.12.1.4 snmpwalk -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcpLineType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.12.1.4.1 snmpget -v2c -c public <target> SDLC-OPT-MIB::cdx6500sdlcpLineType.1
Start monitoring Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDLC-OPT-MIB::cdx6500sdlcpLineType OID value, configure state conditions and alerts, and monitor any Codex/Cisco 6500-series SDLC protocol converter, SNA/mainframe WAN gateway (SDLC link optimization) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.12 | cdx6500PCTSDLCPortTable | SDLC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1 | cdx6500PCTSDLCPortEntry | SDLC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.4 | cdx6500sdlcpLineType | SDLC-OPT-MIB |