SAF-INTEGRAX-MIB

All MIBs › SAF-INTEGRAX-MIB

Organization: SAF Tehnika

Last Updated: 2020-06-26

Category: Microwave Radio - SAF Tehnika, SAF Tehnika Microwave

Description: Manages SAF Tehnika Integra-X microwave radio variant configuration and performance monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SAF-INTEGRAX-MIB?

SAF-INTEGRAX-MIB is a vendor MIB from SAF Tehnika for the Integra-X series of point-to-point microwave radio links, used in telecom backhaul and long-distance wireless transmission. It exposes per-radio-side (A/B) configuration and performance objects covering transmit power, transmit/receive frequency, receive signal level and its threshold state, duplex shift, mute status/duration, and radio temperature. Its monitoring emphasis is hardware/RF link status: tracking receive signal level state and radio temperature to catch a degrading microwave link or an overheating radio unit before it causes an outage. It builds on the shared SAF-TC-MIB textual conventions used across SAF Tehnika's product MIBs. It is deployed on SAF Tehnika Integra-X microwave radio terminals at both ends of a wireless backhaul link. Engineers can download the SAF-INTEGRAX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SAF-INTEGRAX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SAF Tehnika Integra-X microwave radio link terminal

Monitoring Examples

An administrator would poll integraXradioArxLevel and integraXradioArxLevelState for both radio side A and B to detect a receive signal level dropping into a warning or fail threshold, indicating link degradation from weather, antenna misalignment, or interference. integraXradioAtemperature would be checked to catch an overheating radio unit, while integraXradioAtxPower and integraXradioAtxFrequency confirm the transmitter is operating at its configured power and frequency, and integraXradioAtxMute/integraXradioAtxMuteDuration would reveal if the transmitter has been intentionally or unexpectedly muted.

What Can Be Monitored

receive signal level and threshold state
transmit power
transmit/receive frequency
radio temperature
transmit mute status/duration
duplex shift setting

Imported Objects

From IANAifType-MIB

IANAifType

From RFC1213-MIB

DisplayString
PhysAddress

From SAF-ENTERPRISE

pointToPoint

OBJECT-IDENTITY

From SAF-INTEGRA-MIB

safIntegra

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
integraX	1.3.6.1.4.1.7571.100.1.1.7.10			SAF Integra-X device management base
DAT integraXtimestamp	1.3.6.1.4.1.7571.100.1.1.7.10.1	DateAndTime	read-only	Last data update time
integraXradio	1.3.6.1.4.1.7571.100.1.1.7.10.2
integraXradioA	1.3.6.1.4.1.7571.100.1.1.7.10.2.1
I32 integraXradioAtxPower	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.1	Integer32	read-only	Output power of radio transmitter
I32 integraXradioAtxFrequency	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.2	Integer32	read-only	Frequency of radio transmitter
I32 integraXradioArxLevel	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.3	Integer32	read-only	Level of the received signal
INT integraXradioArxLevelState	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.4	INTEGER	read-only	Received signal level state
INT integraXradioAside	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.5	INTEGER	read-only	Radio side: Low/High
INT integraXradioAtxMute	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.6	INTEGER	read-only	Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable
I32 integraXradioAtxMuteDuration	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.7	Integer32	read-only	Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
I32 integraXradioAduplexShift	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.8	Integer32	read-only	Utilized duplex shift in kHz
I32 integraXradioArxFrequency	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.9	Integer32	read-only	Frequency of radio receiver
FIX integraXradioAtemperature	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.10	FixedDiv10	read-only	Radio module temperature
INT integraXradioApll	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.11	INTEGER	read-only	PLL state of local-oscillator generator
integraXradioArangesTable	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12		not-accessible	Network interface port status data.
integraXradioArangeEntry	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1		not-accessible	An entry containing network physical port status info.
I32 integraXradioArangeEntryIndex	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.1	Integer32	read-only	A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
STR integraXradioArangeDescr	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.2	DisplayString	read-only	'Minimal' and 'maximal' labels
I32 integraXradioArangeTxPower	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.3	Integer32	read-only	Output power ranges for radio transmitter
I32 integraXradioArangeTxFrequency	1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.4	Integer32	read-only	Frequency ranges for radio transmitter
integraXradioB	1.3.6.1.4.1.7571.100.1.1.7.10.2.2
I32 integraXradioBtxPower	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.1	Integer32	read-only	Output power of radio transmitter
I32 integraXradioBtxFrequency	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.2	Integer32	read-only	Frequency of radio transmitter
I32 integraXradioBrxLevel	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.3	Integer32	read-only	Level of the received signal
INT integraXradioBrxLevelState	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.4	INTEGER	read-only	Received signal level state
INT integraXradioBside	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.5	INTEGER	read-only	Radio side: Low/High
INT integraXradioBtxMute	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.6	INTEGER	read-only	Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable
I32 integraXradioBtxMuteDuration	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.7	Integer32	read-only	Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
I32 integraXradioBduplexShift	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.8	Integer32	read-only	Utilized duplex shift in kHz
I32 integraXradioBrxFrequency	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.9	Integer32	read-only	Frequency of radio receiver
FIX integraXradioBtemperature	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.10	FixedDiv10	read-only	Radio module temperature
INT integraXradioBpll	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.11	INTEGER	read-only	PLL state of local-oscillator generator
integraXradioBrangesTable	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12		not-accessible	Network interface port status data.
integraXradioBrangeEntry	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1		not-accessible	An entry containing network physical port status info.
I32 integraXradioBrangeEntryIndex	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.1	Integer32	read-only	A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
STR integraXradioBrangeDescr	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.2	DisplayString	read-only	'Minimal' and 'maximal' labels
I32 integraXradioBrangeTxPower	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.3	Integer32	read-only	Output power ranges for radio transmitter
I32 integraXradioBrangeTxFrequency	1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.4	Integer32	read-only	Frequency ranges for radio transmitter
integraXmodem	1.3.6.1.4.1.7571.100.1.1.7.10.3
integraXmodemA	1.3.6.1.4.1.7571.100.1.1.7.10.3.1
INT integraXmodemAacquireStatus	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.1	INTEGER	read-only	This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails.
I32 integraXmodemAnormalizedMse	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.2	Integer32	read-only	Current normalized MSE value (floating point value multiplied by 10)
STR integraXmodemAfecLoad	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.3	DisplayString	read-only	Decoder stress or FEC load value (floating point in textual representation)
I32 integraXmodemAxpdEst	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.4	Integer32	read-only	XPD Estimated value (floating point value multiplied by 10)
INT integraXmodemAacquireLastStatusDetails	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.5	INTEGER	read-only	This is the last status of successfull or unsuccessful modem data acquire
FIX integraXmodemAtemperature	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.6	FixedDiv10	read-only	Modem DSP temperature
STR integraXmodemArxModulation	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.7	DisplayString	read-only	Current (actual) Rx Modulation
STR integraXmodemAtxModulation	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.8	DisplayString	read-only	Current (actual) Tx Modulation
I32 integraXmodemArxCapacity	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.9	Integer32	read-only	Rx ethernet capacity in kilobits per second
I32 integraXmodemAtxCapacity	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.10	Integer32	read-only	Tx ethernet capacity in kilobits per second
INT integraXmodemAacmEngine	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.11	INTEGER	read-only	ACM engine status
I32 integraXmodemAcarrierOffset	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.12	Integer32	read-only	Modem carrier offset
C64 integraXmodemAcountTime	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.13	Counter64	read-only	Modem performance count time
C64 integraXmodemAerroredBlock	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.14	Counter64	read-only	Modem performance errored blocks
C64 integraXmodemAerroredSecond	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.15	Counter64	read-only	Modem performance errored seconds
C64 integraXmodemAseverelyErroredSecond	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.16	Counter64	read-only	Modem performance severely errored seconds
C64 integraXmodemAbackgroundBlockError	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.17	Counter64	read-only	Modem performance background block errors
C64 integraXmodemAtotalBlockNumber	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.18	Counter64	read-only	Modem performance total block number
STR integraXmodemAerroredSecondRatio	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.19	DisplayString	read-only	Modem performance errored second ratio
STR integraXmodemAseverelyErroredSecondRatio	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.20	DisplayString	read-only	Modem performance severely errored second ratio
STR integraXmodemAbackgroundBlockErrorRatio	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.21	DisplayString	read-only	Modem performance background block error ratio
C64 integraXmodemAuptime	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.22	Counter64	read-only	Modem performance : uptime
C64 integraXmodemAunavailtime	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.23	Counter64	read-only	Modem performance : unavailtime
C64 integraXmodemAfecLdpcBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.24	Counter64	read-only	Modem FEC load block counter
C64 integraXmodemAfecLdpcUncorrectedBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.25	Counter64	read-only	Modem FEC load uncorrected block counter
I32 integraXmodemAfecLdpcUncorrectedPercent	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.26	Integer32	read-only	Modem FEC load uncorrected percent
C64 integraXmodemAfecRsBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.27	Counter64	read-only	Modem FEC load RS block counter
C64 integraXmodemAfecRsUncorrectedBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.28	Counter64	read-only	Modem FEC load RS uncorrected block counter
STR integraXmodemAmodulationACMmin	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.29	DisplayString	read-only	Minimal modulation for ACM enabled profile
STR integraXmodemAmodulationACMmax	1.3.6.1.4.1.7571.100.1.1.7.10.3.1.30	DisplayString	read-only	Maximal modulation for ACM enabled profile
integraXmodemB	1.3.6.1.4.1.7571.100.1.1.7.10.3.2
INT integraXmodemBacquireStatus	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.1	INTEGER	read-only	This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails.
I32 integraXmodemBnormalizedMse	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.2	Integer32	read-only	Current normalized MSE value (floating point value multiplied by 10)
STR integraXmodemBfecLoad	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.3	DisplayString	read-only	Decoder stress or FEC load value (floating point in textual representation)
I32 integraXmodemBxpdEst	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.4	Integer32	read-only	XPD Estimated value (floating point value multiplied by 10)
INT integraXmodemBacquireLastStatusDetails	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.5	INTEGER	read-only	This is the last status of successfull or unsuccessful modem data acquire
FIX integraXmodemBtemperature	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.6	FixedDiv10	read-only	Modem DSP temperature
STR integraXmodemBrxModulation	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.7	DisplayString	read-only	Current (actual) Rx Modulation
STR integraXmodemBtxModulation	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.8	DisplayString	read-only	Current (actual) Tx Modulation
I32 integraXmodemBrxCapacity	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.9	Integer32	read-only	Rx ethernet capacity in kilobits per second
I32 integraXmodemBtxCapacity	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.10	Integer32	read-only	Tx ethernet capacity in kilobits per second
INT integraXmodemBacmEngine	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.11	INTEGER	read-only	ACM engine status
I32 integraXmodemBcarrierOffset	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.12	Integer32	read-only	Modem carrier offset
C64 integraXmodemBcountTime	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.13	Counter64	read-only	Modem performance count time
C64 integraXmodemBerroredBlock	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.14	Counter64	read-only	Modem performance errored blocks
C64 integraXmodemBerroredSecond	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.15	Counter64	read-only	Modem performance errored seconds
C64 integraXmodemBseverelyErroredSecond	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.16	Counter64	read-only	Modem performance severely errored seconds
C64 integraXmodemBbackgroundBlockError	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.17	Counter64	read-only	Modem performance background block errors
C64 integraXmodemBtotalBlockNumber	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.18	Counter64	read-only	Modem performance total block number
STR integraXmodemBerroredSecondRatio	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.19	DisplayString	read-only	Modem performance errored second ratio
STR integraXmodemBseverelyErroredSecondRatio	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.20	DisplayString	read-only	Modem performance severely errored second ratio
STR integraXmodemBbackgroundBlockErrorRatio	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.21	DisplayString	read-only	Modem performance background block error ratio
C64 integraXmodemBuptime	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.22	Counter64	read-only	Modem performance : uptime
C64 integraXmodemBunavailtime	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.23	Counter64	read-only	Modem performance : unavailtime
C64 integraXmodemBfecLdpcBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.24	Counter64	read-only	Modem FEC load block counter
C64 integraXmodemBfecLdpcUncorrectedBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.25	Counter64	read-only	Modem FEC load uncorrected block counter
I32 integraXmodemBfecLdpcUncorrectedPercent	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.26	Integer32	read-only	Modem FEC load uncorrected percent
C64 integraXmodemBfecRsBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.27	Counter64	read-only	Modem FEC load RS block counter
C64 integraXmodemBfecRsUncorrectedBlockCounter	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.28	Counter64	read-only	Modem FEC load RS uncorrected block counter
STR integraXmodemBmodulationACMmin	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.29	DisplayString	read-only	Minimal modulation for ACM enabled profile
STR integraXmodemBmodulationACMmax	1.3.6.1.4.1.7571.100.1.1.7.10.3.2.30	DisplayString	read-only	Maximal modulation for ACM enabled profile
I32 integraXmodemBandwidth	1.3.6.1.4.1.7571.100.1.1.7.10.3.3	Integer32	read-only	Signal bandwidth
STR integraXmodemModulation	1.3.6.1.4.1.7571.100.1.1.7.10.3.4	DisplayString	read-only	Modulation (preferred)
integraXsystem	1.3.6.1.4.1.7571.100.1.1.7.10.4
FIX integraXsysCPUtemperature	1.3.6.1.4.1.7571.100.1.1.7.10.4.2	FixedDiv10	read-only	System CPU temperature
G32 integraXsysLicenseExpire	1.3.6.1.4.1.7571.100.1.1.7.10.4.3	Gauge32	read-only	License expires after number of seconds. In the case of -1, check licenseGenStatus status
INT integraXsysLicenseGenStatus	1.3.6.1.4.1.7571.100.1.1.7.10.4.4	INTEGER	read-only	License General status.
I32 integraXsysPSUvoltage	1.3.6.1.4.1.7571.100.1.1.7.10.4.5	Integer32	read-only	Power voltage in mV
I32 integraXsysPSUcurrent	1.3.6.1.4.1.7571.100.1.1.7.10.4.6	Integer32	read-only	Power current in mA
I32 integraXsysPSUpower	1.3.6.1.4.1.7571.100.1.1.7.10.4.7	Integer32	read-only	Power consumption in mW
FIX integraXsysBoardTemperature	1.3.6.1.4.1.7571.100.1.1.7.10.4.8	FixedDiv10	read-only	System temperature
FIX integraXsysFreeMemory	1.3.6.1.4.1.7571.100.1.1.7.10.4.9	FixedDiv10	read-only	System free memory
FIX integraXsysCPUidle	1.3.6.1.4.1.7571.100.1.1.7.10.4.10	FixedDiv10	read-only	System CPU idle
STR integraXsysDeviceType	1.3.6.1.4.1.7571.100.1.1.7.10.4.11	DisplayString	read-only	Device type name
STR integraXsysDeviceSerial	1.3.6.1.4.1.7571.100.1.1.7.10.4.12	DisplayString	read-only	Device serial number
STR integraXsysDeviceProductModel	1.3.6.1.4.1.7571.100.1.1.7.10.4.13	DisplayString	read-only	Device product model code
BIT integraXsysFanError	1.3.6.1.4.1.7571.100.1.1.7.10.4.14	Bits	read-only	Device fan 1 and fan 2 error status
FIX integraXsysSw1v0core	1.3.6.1.4.1.7571.100.1.1.7.10.4.15	FixedDiv20	read-only	SW_1V0_CORE
FIX integraXsysSw1v0avdd	1.3.6.1.4.1.7571.100.1.1.7.10.4.16	FixedDiv20	read-only	SW_1V0_AVDD
FIX integraXsysSw1v2a	1.3.6.1.4.1.7571.100.1.1.7.10.4.17	FixedDiv20	read-only	SW_1V2A
FIX integraXsysSw1v5ddr	1.3.6.1.4.1.7571.100.1.1.7.10.4.18	FixedDiv20	read-only	SW_1V5_DDR
FIX integraXsysSw1v8	1.3.6.1.4.1.7571.100.1.1.7.10.4.19	FixedDiv20	read-only	SW_1V8
FIX integraXsysSw2v5	1.3.6.1.4.1.7571.100.1.1.7.10.4.20	FixedDiv20	read-only	SW_2V5
FIX integraXsysSw3v3	1.3.6.1.4.1.7571.100.1.1.7.10.4.21	FixedDiv20	read-only	SW_3V3
FIX integraXsysVttrefPs	1.3.6.1.4.1.7571.100.1.1.7.10.4.22	FixedDiv20	read-only	VTTVREF_PS
FIX integraXsysVttddrPs	1.3.6.1.4.1.7571.100.1.1.7.10.4.23	FixedDiv20	read-only	VTTDDR_PS
FIX integraXsysZq1v0	1.3.6.1.4.1.7571.100.1.1.7.10.4.24	FixedDiv20	read-only	ZQ_1V0
FIX integraXsysZq1v5	1.3.6.1.4.1.7571.100.1.1.7.10.4.25	FixedDiv20	read-only	ZQ_1V5
FIX integraXsysZq1v8	1.3.6.1.4.1.7571.100.1.1.7.10.4.26	FixedDiv20	read-only	ZQ_1V8
FIX integraXsysZq2v5	1.3.6.1.4.1.7571.100.1.1.7.10.4.27	FixedDiv20	read-only	ZQ_2V5
FIX integraXsysZq3v3	1.3.6.1.4.1.7571.100.1.1.7.10.4.28	FixedDiv20	read-only	ZQ_3V3
FIX integraXsys5v0d	1.3.6.1.4.1.7571.100.1.1.7.10.4.29	FixedDiv20	read-only	5V0D
FIX integraXsysSw1v2	1.3.6.1.4.1.7571.100.1.1.7.10.4.30	FixedDiv20	read-only	SW_1V2
FIX integraXsysMdmVddcAvs	1.3.6.1.4.1.7571.100.1.1.7.10.4.31	FixedDiv20	read-only	MDM_VDDC_AVS
FIX integraXsysMdm3v3	1.3.6.1.4.1.7571.100.1.1.7.10.4.32	FixedDiv20	read-only	MDM_3V3
FIX integraXsysMdm1v0aPm	1.3.6.1.4.1.7571.100.1.1.7.10.4.33	FixedDiv20	read-only	MDM_1V0A_PM
FIX integraXsysMdm1v0a	1.3.6.1.4.1.7571.100.1.1.7.10.4.34	FixedDiv20	read-only	MDM_1V0A
FIX integraXsysMdm1v8a	1.3.6.1.4.1.7571.100.1.1.7.10.4.35	FixedDiv20	read-only	MDM_1V8A
FIX integraXsysMdmDAC02v5a	1.3.6.1.4.1.7571.100.1.1.7.10.4.36	FixedDiv20	read-only	MDM_DAC0_2V5A
FIX integraXsysMdmDAC12v5	1.3.6.1.4.1.7571.100.1.1.7.10.4.37	FixedDiv20	read-only	MDM_DAC1_2V5A
FIX integraXsysMdmDAC22v5	1.3.6.1.4.1.7571.100.1.1.7.10.4.38	FixedDiv20	read-only	MDM_DAC2_2V5A
FIX integraXsysMdm1v8io	1.3.6.1.4.1.7571.100.1.1.7.10.4.39	FixedDiv20	read-only	MDM_1V8_IO
FIX integraXsysMdm3v3io	1.3.6.1.4.1.7571.100.1.1.7.10.4.40	FixedDiv20	read-only	MDM_3V3_IO
FIX integraXsys3v3Radio	1.3.6.1.4.1.7571.100.1.1.7.10.4.41	FixedDiv20	read-only	3V3_RADIO
FIX integraXsysMdm4v0	1.3.6.1.4.1.7571.100.1.1.7.10.4.42	FixedDiv20	read-only	MDM_4V0
FIX integraXsys5v0nRadio	1.3.6.1.4.1.7571.100.1.1.7.10.4.43	FixedDiv20	read-only	5V0N_RADIO
FIX integraXsysCoreVddSns	1.3.6.1.4.1.7571.100.1.1.7.10.4.44	FixedDiv20	read-only	CORE_VDD_SNS
FIX integraXsys40v0RadioSns	1.3.6.1.4.1.7571.100.1.1.7.10.4.45	FixedDiv20	read-only	40V0_RADIO_SNS
integraXsysServices	1.3.6.1.4.1.7571.100.1.1.7.10.4.46
INT integraXsysServicesReboot	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.1	INTEGER	read-write	This object can only be set to 1. It initiates system reboot immediately.
INT integraXsysServicesFtpSwitch	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.2	INTEGER	read-write	Status and on/off switch for the FTP server
STR integraXsysServicesFwCurrInfo	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.3	DisplayString	read-only	Currently running FW info. Same output as in RFC1213-MIB::sysDescr.
STR integraXsysServicesFwAvailView	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.4	DisplayString	read-only	List FW available for installation (uploaded).
INT integraXsysServicesFwRemove	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.5	INTEGER	read-write	Remove available (uploaded) FW version. View FW versions in integraXsysServicesFwAvailView. Send number corresponding to info in integraXsysServicesFwAvailView.
INT integraXsysServicesFwRemoveAll	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.6	INTEGER	read-write	Remove all available (uploaded) FW versions.
INT integraXsysServicesFwUpload	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7	INTEGER	read-write	Upload FW (make available for installation). You need to upload a firmware to FTP ftp://anonymous@DEVICE_IP:/firmware/ first! You must have only 1 firmware in firmware folder for this option to work! This option only starts upload on the device and doesn't return success status for it. Usually you should wait some time while the device completes upload. SNMP won't response to quieries while upload is in progress. You may check integraXsysServicesFwAvailView to see if your FW is ready for install.
INT integraXsysServicesFwInst	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8	INTEGER	read-write	Install FW version. You need check integraXsysServicesFwAvailView to see FW versions ready for install. This option only starts installation on the device and doesn't return success status for it. Usually you should wait some time while the device completes installation. SNMP won't response to quieries while upload is in progress. If FW installation was successful, integraXsysServicesFwSwitchNext will show different FW bank value for the next boot.
INT integraXsysServicesFwSwitchRunning	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.9	INTEGER	read-only	FW running bank info. Use integraXsysServicesFwSwitchNext to view and switch FW bank for the next boot.
INT integraXsysServicesFwSwitchNext	1.3.6.1.4.1.7571.100.1.1.7.10.4.46.10	INTEGER	read-write	FW next boot bank info. Set request can change FW bank for the next boot. View running FW bank number in integraXsysServicesFwSwitchRunning.
integraXethernet	1.3.6.1.4.1.7571.100.1.1.7.10.5
integraXifStatusTable	1.3.6.1.4.1.7571.100.1.1.7.10.5.1		not-accessible	Network interface port status data.
integraXifPortEntry	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1		not-accessible	An entry containing network physical port status info.
I32 integraXifPortStatIndex	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.1	Integer32	read-only	A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
STR integraXifPortStatDescr	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.2	DisplayString	read-only	Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port.
IAN integraXifPortType	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.3	IANAifType	read-only	The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
I32 integraXifPortMtu	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.4	Integer32	read-only	Maximum transmission unit value in bytes.
G32 integraXifPortHighSpeed	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.5	Gauge32	read-only	Link speed in 1 000 000 * bits per second.
PHY integraXifPortPhysAddress	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.6	PhysAddress	read-only	The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
INT integraXifPortAdminStatus	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.7	INTEGER	read-only	Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received).
INT integraXifPortOperStatus	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.8	INTEGER	read-only	Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state.
TIK integraXifPortLastChange	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.9	TimeTicks	read-only	This parameter value is always 0 at the moment.
INT integraXifPortAutoneg	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.10	INTEGER	read-only	Auto-negotiation status. Unknown means no info was received.
INT integraXifPortDuplex	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.11	INTEGER	read-only	Duplex status for the interface.
INT integraXifPortSyncEthActive	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.12	INTEGER	read-only	Synchronous Ethernet status. Can be active(1) or inactive(0).
I32 integraXifPortSyncEthPrio	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.13	Integer32	read-only	Synchronous Ethernet priority.
INT integraXifPortFlowControl	1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.14	INTEGER	read-only	Flow control status.
integraXifStatisticsTable	1.3.6.1.4.1.7571.100.1.1.7.10.5.2		not-accessible	Network interface port statistics data.
integraXifPortStcEntry	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1		not-accessible	An entry containing network physical port statistics counter data.
I32 integraXifPortStcIndex	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.1	Integer32	read-only	A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
STR integraXifPortStcDescr	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.2	DisplayString	read-only	Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
TIK integraXifTimePassed	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.3	TimeTicks	read-only	Statistics collection time.
C64 integraXifIngressPackets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.4	Counter64	read-only	Packets that ingress on the port.
C64 integraXifIngressBytes	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.5	Counter64	read-only	Bytes that ingress on the port.
C64 integraXifEgressPackets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.6	Counter64	read-only	Packets that egress on the port.
C64 integraXifEgressBytes	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.7	Counter64	read-only	Bytes that egress on the port.
C64 integraXifEtherStatsMulticastPkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.8	Counter64	read-only	The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
C64 integraXifEtherStatsBroadcastPkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.9	Counter64	read-only	The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets.
C64 integraXifEtherStatsPkts64Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.10	Counter64	read-only	The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets).
C64 integraXifEtherStatsPkts65to127Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.11	Counter64	read-only	The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifEtherStatsPkts128to255Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.12	Counter64	read-only	The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifEtherStatsPkts256to511Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.13	Counter64	read-only	The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifEtherStatsPkts512to1023Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.14	Counter64	read-only	The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifEtherStatsPkts1024to1518Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.15	Counter64	read-only	The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifEtherStatsOversizePkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.16	Counter64	read-only	The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
C64 integraXifEtherRxOversizePkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.17	Counter64	read-only	The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
C64 integraXifEtherTxOversizePkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.18	Counter64	read-only	The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
C64 integraXifEtherStatsOctets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.19	Counter64	read-only	Total number of octets of data (including those in bad packets) both received and transmitted.
C64 integraXifEtherStatsPkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.20	Counter64	read-only	Total number of packets (including bad packets) both received and transmitted.
C64 integraXifEtherStatsTXNoErrors	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.21	Counter64	read-only	Number of packets that were transmitted without errors.
C64 integraXifEtherStatsRXNoErrors	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.22	Counter64	read-only	Number of packets that were received without errors.
C64 integraXifEtherStatsPkts1519to1522Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.23	Counter64	read-only	The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifIfInOctets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.24	Counter64	read-only	Total number of octets of data (including those in bad packets) that were received.
C64 integraXifIfOutOctets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.25	Counter64	read-only	Total number of octets of data (including those in bad packets) that were transmitted.
C64 integraXifDot1dTpPortInFrames	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.26	Counter64	read-only	The number of frames that have been received by this port from its segment.
C64 integraXifDot1dTpPortOutFrames	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.27	Counter64	read-only	The number of frames that have been transmitted by this port to its segment.
C64 integraXifReceivedPkts64Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.28	Counter64	read-only	Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets).
C64 integraXifTransmittedPkts64Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.29	Counter64	read-only	Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets).
C64 integraXifReceivedPkts65to127Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.30	Counter64	read-only	Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifTransmittedPkts65to127Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.31	Counter64	read-only	Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifReceivedPkts128to255Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.32	Counter64	read-only	Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifTransmittedPkts128to255Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.33	Counter64	read-only	Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifReceivedPkts256to511Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.34	Counter64	read-only	Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifTransmittedPkts256to511Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.35	Counter64	read-only	Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifReceivedPkts512to1023Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.36	Counter64	read-only	Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifTransmittedPkts512to1023Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.37	Counter64	read-only	Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifReceivedPkts1024to1518Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.38	Counter64	read-only	Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifTransmittedPkts1024to1518Octets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.39	Counter64	read-only	Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
C64 integraXifIfInBroadcastPkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.40	Counter64	read-only	The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets.
C64 integraXifIfOutBroadcastPkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.41	Counter64	read-only	The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets.
C64 integraXifIfInMulticastPkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.42	Counter64	read-only	The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
C64 integraXifIfOutMulticastPkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.43	Counter64	read-only	The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
C64 integraXifDot3InPauseFrames	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.44	Counter64	read-only	A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
C64 integraXifDot3OutPauseFrames	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.45	Counter64	read-only	A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
C64 integraXifEtherStatsUndersizePkts	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.46	Counter64	read-only	The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
C64 integraXifEtherStatsFragments	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47	Counter64	read-only	The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
C64 integraXifEtherStatsCRCAlignErrors	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.48	Counter64	read-only	The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
C64 integraXifEtherStatsJabbers	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49	Counter64	read-only	The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
I32 integraXifIngressBPS	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.50	Integer32	read-only	Ingoing data transfer rate in bytes per second.
I32 integraXifIngressPPS	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.51	Integer32	read-only	Ingoing data transfer rate in packets per second.
I32 integraXifEgressBPS	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.52	Integer32	read-only	Outgoing data transfer rate in bytes per second.
I32 integraXifEgressPPS	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.53	Integer32	read-only	Outgoing data transfer rate in packets per second.
C64 integraXifAllCoSQoutPackets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.54	Counter64	read-only	All CoSQ outgoing packets.
C64 integraXifAllCoSQoutBytes	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.55	Counter64	read-only	All CoSQ outgoing bytes.
C64 integraXifAllCoSQdroppedPackets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.56	Counter64	read-only	All CoSQ dropped packets.
C64 integraXifAllCoSQdroppedBytes	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.57	Counter64	read-only	All CoSQ dropped bytes.
C64 integraXifProcessedRxPackets	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.58	Counter64	read-only	Processed received packets.
C64 integraXifProcessedRxBytes	1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.59	Counter64	read-only	Processed received bytes.
INT integraXifLspPortAdminState	1.3.6.1.4.1.7571.100.1.1.7.10.5.3	INTEGER	read-only	LSP port status.
BIT integraXifLspPortList	1.3.6.1.4.1.7571.100.1.1.7.10.5.4	Bits	read-only	LSP port status.
INT integraXifLspPortStatus	1.3.6.1.4.1.7571.100.1.1.7.10.5.5	INTEGER	read-only	LSP port status.
INT integraXexecuteConfig	1.3.6.1.4.1.7571.100.1.1.7.10.6	INTEGER	read-write	This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower
INT integraXneedStore	1.3.6.1.4.1.7571.100.1.1.7.10.7	INTEGER	read-only	This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System
INT integraXstoreConfig	1.3.6.1.4.1.7571.100.1.1.7.10.8	INTEGER	read-write	This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error.
integraXnetCfg	1.3.6.1.4.1.7571.100.1.1.7.10.9
STR integraXnetCfgIPaddress	1.3.6.1.4.1.7571.100.1.1.7.10.9.1	DisplayString	read-write	Local IP address
STR integraXnetCfgIPmask	1.3.6.1.4.1.7571.100.1.1.7.10.9.2	DisplayString	read-write	Local IP mask
STR integraXnetCfgIPgateway	1.3.6.1.4.1.7571.100.1.1.7.10.9.3	DisplayString	read-write	IP gateway Send '0' or '255.255.255.255' to clear.
STR integraXnetCfgRemoteIPaddress	1.3.6.1.4.1.7571.100.1.1.7.10.9.4	DisplayString	read-only	Remote IP address
integraXConformance	1.3.6.1.4.1.7571.100.1.1.7.10.10
integraXCompliances	1.3.6.1.4.1.7571.100.1.1.7.10.10.1
integraXCompliance	1.3.6.1.4.1.7571.100.1.1.7.10.10.1.1			The compliance statement for SNMP engine which implements the SAF Tehnika Integra-X device.
integraXGroups	1.3.6.1.4.1.7571.100.1.1.7.10.10.2
integraXMiscGroup	1.3.6.1.4.1.7571.100.1.1.7.10.10.2.1			misc data
integraXRadioGroup	1.3.6.1.4.1.7571.100.1.1.7.10.10.2.2			Radio group.
integraXModemGroup	1.3.6.1.4.1.7571.100.1.1.7.10.10.2.3			Modem group.
integraXSystemGroup	1.3.6.1.4.1.7571.100.1.1.7.10.10.2.4			System group.
integraXEthernetGeneralGroup	1.3.6.1.4.1.7571.100.1.1.7.10.10.2.5			A collection to objects, providing info applicable to all network interfaces.
integraXEthernetMiiPortGroup	1.3.6.1.4.1.7571.100.1.1.7.10.10.2.6			A collection of objects, providing info applicable only to MII group interfaces.

RFC description

Manages SAF Integra-X microwave radio device including modem performance, port status, and system services.

Start monitoring SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SAF-INTEGRAX-MIB

What Is SAF-INTEGRAX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description