SAF-INTEGRAX-MIB :: integraXifEtherStatsJabbers

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SAF-INTEGRAX-MIB › integraXifEtherStatsJabbers

integraXifEtherStatsJabbers

Module: SAF-INTEGRAX-MIB

OID (symbolic): SAF-INTEGRAX-MIB::integraXifEtherStatsJabbers

OID (numeric): 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.

What is integraXifEtherStatsJabbers?

Count of received packets longer than 1518 octets that also had a bad FCS. This platform's definition intentionally differs from the stricter IEEE-802.3 timing-based jabber definition (20-150 ms transmission), instead flagging any oversized frame with a checksum failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49
snmpwalk -v2c -c public <target> SAF-INTEGRAX-MIB::integraXifEtherStatsJabbers

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49.1
snmpget -v2c -c public <target> SAF-INTEGRAX-MIB::integraXifEtherStatsJabbers.1

Start monitoring SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAF-INTEGRAX-MIB::integraXifEtherStatsJabbers OID value, configure state conditions and alerts, and monitor any SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7571safSAF-ENTERPRISE
1.3.6.1.4.1.7571.100tehnikaSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1microwaveRadioSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1pointToPointSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1.7safIntegraSAF-INTEGRA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7571.100.1.1.7.10integraXSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5integraXethernetSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5.2integraXifStatisticsTableSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1integraXifPortStcEntrySAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49integraXifEtherStatsJabbersSAF-INTEGRAX-MIB