All MIBs › SAF-INTEGRAX-MIB › integraXsysServicesFwUpload
integraXsysServicesFwUpload
Module: SAF-INTEGRAX-MIB
OID (symbolic): SAF-INTEGRAX-MIB::integraXsysServicesFwUpload
OID (numeric): 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Upload FW (make available for installation). You need to upload a firmware to FTP ftp://anonymous@DEVICE_IP:/firmware/ first! You must have only 1 firmware in firmware folder for this option to work! This option only starts upload on the device and doesn't return success status for it. Usually you should wait some time while the device completes upload. SNMP won't response to quieries while upload is in progress. You may check integraXsysServicesFwAvailView to see if your FW is ready for install.
What is integraXsysServicesFwUpload?
Write-only trigger (upload(1) is the only accepted value) that tells the device to pull in a firmware file the admin has already placed on its FTP server. The device stops responding to SNMP while the transfer runs, so the admin must poll integraXsysServicesFwAvailView afterward rather than expect an immediate success/failure response from the SET itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7 snmpwalk -v2c -c public <target> SAF-INTEGRAX-MIB::integraXsysServicesFwUpload
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7.1 snmpget -v2c -c public <target> SAF-INTEGRAX-MIB::integraXsysServicesFwUpload.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> integraXsysServicesFwUpload.1
Start monitoring SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAF-INTEGRAX-MIB::integraXsysServicesFwUpload OID value, configure state conditions and alerts, and monitor any SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7571 | saf | SAF-ENTERPRISE |
| 1.3.6.1.4.1.7571.100 | tehnika | SAF-ENTERPRISE |
| 1.3.6.1.4.1.7571.100.1 | microwaveRadio | SAF-ENTERPRISE |
| 1.3.6.1.4.1.7571.100.1.1 | pointToPoint | SAF-ENTERPRISE |
| 1.3.6.1.4.1.7571.100.1.1.7 | safIntegra | SAF-INTEGRA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7571.100.1.1.7.10 | integraX | SAF-INTEGRAX-MIB |
| 1.3.6.1.4.1.7571.100.1.1.7.10.4 | integraXsystem | SAF-INTEGRAX-MIB |
| 1.3.6.1.4.1.7571.100.1.1.7.10.4.46 | integraXsysServices | SAF-INTEGRAX-MIB |
| 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7 | integraXsysServicesFwUpload | SAF-INTEGRAX-MIB |