All MIBs › SAF-INTEGRAB-MIB
Organization: SAF Tehnika
Last Updated: 2015-09-17
Category: Microwave Radio - SAF Tehnika, SAF Tehnika Microwave
Description: Manages SAF Tehnika Integra-B microwave radio variant configuration and performance monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SAF-INTEGRAB-MIB?
SAF-INTEGRAB-MIB is a vendor-specific MIB from SAF Tehnika for the Integra-B variant of its microwave radio product line, used for point-to-point wireless backhaul links. It exposes RF performance objects such as transmit power, transmit/receive frequency, and received signal level, along with environmental and control data like radio temperature and transmit mute state. Its monitoring focus is squarely on hardware health of the radio link: temperature indicates overheating hardware, while transmit power and receive level trending down signal a degrading link before it drops entirely. As a standalone vendor MIB it has no strong dependency on other MIBs beyond standard SNMPv2 conventions. It is typically deployed on point-to-point microwave radio links used for telecom backhaul between towers or sites. Network engineers evaluating or troubleshooting this functionality can download the SAF-INTEGRAB-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SAF-INTEGRAB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- SAF Tehnika Integra-B microwave radio link equipment
Monitoring Examples
An engineer polls integraBradioTxPower and integraBradioRxLevel to verify the link's transmit power and received signal level remain within spec, catching a degrading link before it drops; integraBradioTemperature flags overheating radio hardware, while integraBradioTxFrequency and integraBradioRxFrequency confirm the link is tuned to its assigned channel plan, with integraBradioRangesTable providing per-range configuration detail.
What Can Be Monitored
- transmit power level
- receive signal level
- transmit/receive frequency
- radio temperature
- transmit mute status/duration
- duplex shift configuration
This MIB depends on
Related MIBs
Imported Objects
From IANAifType-MIB
| IANAifType |
From SAF-ENTERPRISE
| pointToPoint | OBJECT-IDENTITY |
From SAF-INTEGRA-MIB
| safIntegra | MODULE-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| PhysAddress |
How to Use in IPNetwork Monitor
Example using integraBifIngressPackets OID:
Select an SAF Tehnika Integra-B microwave radio link equipment (transmit power/receive level/temperature) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type integraBifIngressPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Packets that ingress on the port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in packet), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| integraB | 1.3.6.1.4.1.7571.100.1.1.7.1 | SAF Integra-B device management base | ||
| DAT integraBtimestamp | 1.3.6.1.4.1.7571.100.1.1.7.1.1 | DateAndTime | read-only | Last data update time |
| integraBradio | 1.3.6.1.4.1.7571.100.1.1.7.1.2 | |||
| I32 integraBradioTxPower | 1.3.6.1.4.1.7571.100.1.1.7.1.2.1 | Integer32 | read-write | Output power of radio transmitter |
| I32 integraBradioTxFrequency | 1.3.6.1.4.1.7571.100.1.1.7.1.2.2 | Integer32 | read-write | Frequency of radio transmitter |
| I32 integraBradioRxLevel | 1.3.6.1.4.1.7571.100.1.1.7.1.2.3 | Integer32 | read-only | Level of the received signal |
| INT integraBradioSide | 1.3.6.1.4.1.7571.100.1.1.7.1.2.4 | INTEGER | read-only | Radio side: Low/High |
| INT integraBradioTxMute | 1.3.6.1.4.1.7571.100.1.1.7.1.2.5 | INTEGER | read-only | Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable |
| I32 integraBradioDuplexShift | 1.3.6.1.4.1.7571.100.1.1.7.1.2.6 | Integer32 | read-only | Utilized duplex shift in kHz |
| I32 integraBradioRxFrequency | 1.3.6.1.4.1.7571.100.1.1.7.1.2.7 | Integer32 | read-only | Frequency of radio receiver |
| I32 integraBradioTemperature | 1.3.6.1.4.1.7571.100.1.1.7.1.2.8 | Integer32 | read-only | Radio module temperature *10 Celsius |
| I32 integraBradioTxMuteDuration | 1.3.6.1.4.1.7571.100.1.1.7.1.2.9 | Integer32 | read-write | Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off. |
| integraBradioRangesTable | 1.3.6.1.4.1.7571.100.1.1.7.1.2.10 | not-accessible | Network interface port status data. | |
| integraBradioRangeEntry | 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1 | not-accessible | An entry containing network physical port status info. | |
| I32 integraBradioRangeEntryIndex | 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.1 | Integer32 | read-only | A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters. |
| STR integraBradioRangeDescr | 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.2 | DisplayString | read-only | 'Minimal' and 'maximal' labels |
| I32 integraBradioRangeTxPower | 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.3 | Integer32 | read-only | Output power ranges for radio transmitter |
| I32 integraBradioRangeTxFrequency | 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.4 | Integer32 | read-only | Frequency ranges for radio transmitter |
| INT integraBradioPLL | 1.3.6.1.4.1.7571.100.1.1.7.1.2.11 | INTEGER | read-only | PLL state of local-oscillator generator |
| integraBmodem | 1.3.6.1.4.1.7571.100.1.1.7.1.3 | |||
| INT integraBmodemAcquireStatus | 1.3.6.1.4.1.7571.100.1.1.7.1.3.1 | INTEGER | read-only | This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails. |
| I32 integraBmodemRadialMse | 1.3.6.1.4.1.7571.100.1.1.7.1.3.2 | Integer32 | read-only | Current radial MSE value (floating point value multiplied by 10) |
| STR integraBmodemFECload | 1.3.6.1.4.1.7571.100.1.1.7.1.3.3 | DisplayString | read-only | Decoder stress or FEC load value (floating point in textual representation) |
| INT integraBmodemAcquireLastStatusDetails | 1.3.6.1.4.1.7571.100.1.1.7.1.3.4 | INTEGER | read-only | This is the last status of successfull or unsuccessful modem data acquire |
| I32 integraBmodemTemperature | 1.3.6.1.4.1.7571.100.1.1.7.1.3.5 | Integer32 | read-only | Modem DSP temperature *10 Celsius |
| I32 integraBmodemBandwidth | 1.3.6.1.4.1.7571.100.1.1.7.1.3.6 | Integer32 | read-only | Signal bandwidth |
| STR integraBmodemModulation | 1.3.6.1.4.1.7571.100.1.1.7.1.3.7 | DisplayString | read-only | Modulation (preferred) |
| STR integraBmodemRxModulation | 1.3.6.1.4.1.7571.100.1.1.7.1.3.8 | DisplayString | read-only | Current (actual) Rx Modulation |
| STR integraBmodemTxModulation | 1.3.6.1.4.1.7571.100.1.1.7.1.3.9 | DisplayString | read-only | Current (actual) Tx Modulation |
| I32 integraBmodemRxCapacity | 1.3.6.1.4.1.7571.100.1.1.7.1.3.10 | Integer32 | read-only | Rx ethernet capacity in kilobits per second |
| I32 integraBmodemTxCapacity | 1.3.6.1.4.1.7571.100.1.1.7.1.3.11 | Integer32 | read-only | Tx ethernet capacity in kilobits per second |
| INT integraBmodemACMengine | 1.3.6.1.4.1.7571.100.1.1.7.1.3.12 | INTEGER | read-only | ACM engine status |
| I32 integraBmodemCarrierOffset | 1.3.6.1.4.1.7571.100.1.1.7.1.3.13 | Integer32 | read-only | Modem carrier offset |
| integraBsystem | 1.3.6.1.4.1.7571.100.1.1.7.1.4 | |||
| I32 integraBsysCPUtemperature | 1.3.6.1.4.1.7571.100.1.1.7.1.4.2 | Integer32 | read-only | System CPU temperature *10 Celsius |
| G32 integraBsysLicenseExpire | 1.3.6.1.4.1.7571.100.1.1.7.1.4.3 | Gauge32 | read-only | License expires after number of seconds. In the case of -1, check licenseGenStatus status |
| INT integraBsysLicenseGenStatus | 1.3.6.1.4.1.7571.100.1.1.7.1.4.4 | INTEGER | read-only | License General status. |
| I32 integraBsysPSUvoltage | 1.3.6.1.4.1.7571.100.1.1.7.1.4.5 | Integer32 | read-only | Power voltage in mV |
| I32 integraBsysPSUcurrent | 1.3.6.1.4.1.7571.100.1.1.7.1.4.6 | Integer32 | read-only | Power current in mA |
| I32 integraBsysPSUpower | 1.3.6.1.4.1.7571.100.1.1.7.1.4.7 | Integer32 | read-only | Power consumption in mW |
| I32 integraBsysBoardTemperature | 1.3.6.1.4.1.7571.100.1.1.7.1.4.8 | Integer32 | read-only | System temperature *10 Celsius |
| I32 integraBsysFreeMemory | 1.3.6.1.4.1.7571.100.1.1.7.1.4.9 | Integer32 | read-only | System free memory *10 % |
| I32 integraBsysCPUidle | 1.3.6.1.4.1.7571.100.1.1.7.1.4.10 | Integer32 | read-only | System CPU idle *10 % |
| integraBethernet | 1.3.6.1.4.1.7571.100.1.1.7.1.5 | |||
| integraBifStatusTable | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1 | not-accessible | Network interface port status data. | |
| integraBifPortEntry | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1 | not-accessible | An entry containing network physical port status info. | |
| I32 integraBifPortStatIndex | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.1 | Integer32 | read-only | A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1. |
| STR integraBifPortStatDescr | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.2 | DisplayString | read-only | Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port. |
| IAN integraBifPortType | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.3 | IANAifType | read-only | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| I32 integraBifPortMtu | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.4 | Integer32 | read-only | Maximum transmission unit value in bytes. |
| G32 integraBifPortSpeed | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.5 | Gauge32 | read-only | Link speed in bits per second. |
| PHY integraBifPortPhysAddress | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.6 | PhysAddress | read-only | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. |
| INT integraBifPortAdminStatus | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.7 | INTEGER | read-only | Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received). |
| INT integraBifPortOperStatus | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.8 | INTEGER | read-only | Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state. |
| TIK integraBifPortLastChange | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.9 | TimeTicks | read-only | This parameter value is always 0 at the moment. |
| INT integraBifPortAutoneg | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.10 | INTEGER | read-only | Auto-negotiation status. Unknown means no info was received. |
| INT integraBifPortDuplex | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.11 | INTEGER | read-only | Duplex status for the interface. |
| INT integraBifPortSyncEthActive | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.12 | INTEGER | read-only | Synchronous Ethernet status. Can be active(1) or inactive(0). |
| I32 integraBifPortSyncEthPrio | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.13 | Integer32 | read-only | Synchronous Ethernet priority. |
| INT integraBifPortFlowControl | 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.14 | INTEGER | read-only | Flow control status. |
| integraBifStatisticsTable | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2 | not-accessible | Network interface port statistics data. | |
| integraBifPortStcEntry | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1 | not-accessible | An entry containing network physical port statistics counter data. | |
| I32 integraBifPortStcIndex | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.1 | Integer32 | read-only | A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1. |
| STR integraBifPortStcDescr | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.2 | DisplayString | read-only | Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface. |
| TIK integraBifTimePassed | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.3 | TimeTicks | read-only | Statistics collection time. |
| C64 integraBifIngressPacketsEx | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.4 | Counter64 | read-only | Packets that ingress on the port. |
| C64 integraBifIngressBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.5 | Counter64 | read-only | Bytes that ingress on the port. |
| C64 integraBifEgressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.6 | Counter64 | read-only | Packets that egress on the port. |
| C64 integraBifEgressBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.7 | Counter64 | read-only | Bytes that egress on the port. |
| C64 integraBifEtherStatsMulticastPkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.8 | Counter64 | read-only | The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address. |
| C64 integraBifEtherStatsBroadcastPkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.9 | Counter64 | read-only | The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets. |
| C64 integraBifEtherStatsPkts64Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.10 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets). |
| C64 integraBifEtherStatsPkts65to127Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.11 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifEtherStatsPkts128to255Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.12 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifEtherStatsPkts256to511Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.13 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifEtherStatsPkts512to1023Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.14 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifEtherStatsPkts1024to1518Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.15 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifEtherStatsOversizePkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.16 | Counter64 | read-only | The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. |
| C64 integraBifEtherRxOversizePkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.17 | Counter64 | read-only | The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. |
| C64 integraBifEtherTxOversizePkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.18 | Counter64 | read-only | The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. |
| C64 integraBifEtherStatsOctets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.19 | Counter64 | read-only | Total number of octets of data (including those in bad packets) both received and transmitted. |
| C64 integraBifEtherStatsPkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.20 | Counter64 | read-only | Total number of packets (including bad packets) both received and transmitted. |
| C64 integraBifEtherStatsTXNoErrors | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.21 | Counter64 | read-only | Number of packets that were transmitted without errors. |
| C64 integraBifEtherStatsRXNoErrors | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.22 | Counter64 | read-only | Number of packets that were received without errors. |
| C64 integraBifEtherStatsPkts1519to1522Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.23 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifIfInOctets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.24 | Counter64 | read-only | Total number of octets of data (including those in bad packets) that were received. |
| C64 integraBifIfOutOctets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.25 | Counter64 | read-only | Total number of octets of data (including those in bad packets) that were transmitted. |
| C64 integraBifDot1dTpPortInFrames | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.26 | Counter64 | read-only | The number of frames that have been received by this port from its segment. |
| C64 integraBifDot1dTpPortOutFrames | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.27 | Counter64 | read-only | The number of frames that have been transmitted by this port to its segment. |
| C64 integraBifReceivedPkts64Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.28 | Counter64 | read-only | Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets). |
| C64 integraBifTransmittedPkts64Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.29 | Counter64 | read-only | Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets). |
| C64 integraBifReceivedPkts65to127Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.30 | Counter64 | read-only | Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifTransmittedPkts65to127Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.31 | Counter64 | read-only | Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifReceivedPkts128to255Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.32 | Counter64 | read-only | Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifTransmittedPkts128to255Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.33 | Counter64 | read-only | Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifReceivedPkts256to511Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.34 | Counter64 | read-only | Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifTransmittedPkts256to511Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.35 | Counter64 | read-only | Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifReceivedPkts512to1023Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.36 | Counter64 | read-only | Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifTransmittedPkts512to1023Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.37 | Counter64 | read-only | Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifReceivedPkts1024to1518Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.38 | Counter64 | read-only | Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifTransmittedPkts1024to1518Octets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.39 | Counter64 | read-only | Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraBifIfInBroadcastPkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.40 | Counter64 | read-only | The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets. |
| C64 integraBifIfOutBroadcastPkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.41 | Counter64 | read-only | The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets. |
| C64 integraBifIfInMulticastPkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.42 | Counter64 | read-only | The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets. |
| C64 integraBifIfOutMulticastPkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.43 | Counter64 | read-only | The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets. |
| C64 integraBifDot3InPauseFrames | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.44 | Counter64 | read-only | A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. |
| C64 integraBifDot3OutPauseFrames | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.45 | Counter64 | read-only | A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. |
| C64 integraBifEtherStatsUndersizePkts | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.46 | Counter64 | read-only | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| C64 integraBifEtherStatsFragments | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.47 | Counter64 | read-only | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits. |
| C64 integraBifEtherStatsCRCAlignErrors | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.48 | Counter64 | read-only | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
| C64 integraBifEtherStatsJabbers | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.49 | Counter64 | read-only | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms. |
| I32 integraBifIngressBPS | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.50 | Integer32 | read-only | Ingoing data transfer rate in bytes per second. |
| I32 integraBifIngressPPS | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.51 | Integer32 | read-only | Ingoing data transfer rate in packets per second. |
| I32 integraBifEgressBPS | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.52 | Integer32 | read-only | Outgoing data transfer rate in bytes per second. |
| I32 integraBifEgressPPS | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.53 | Integer32 | read-only | Outgoing data transfer rate in packets per second. |
| C64 integraBifMAClearnLimitDropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.54 | Counter64 | read-only | MAC learn limit drop (IngressPackets). |
| C64 integraBifL2cacheDropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.55 | Counter64 | read-only | L2 cache drop (IngressPackets). |
| C64 integraBifEFMdropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.56 | Counter64 | read-only | EFM drop (IngressPackets). |
| C64 integraBifEFMdropEgressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.57 | Counter64 | read-only | EFM drop (EgressPackets). |
| C64 integraBifSTPdropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.58 | Counter64 | read-only | STP drop (IngressPackets). |
| C64 integraBifSTPdropEgressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.59 | Counter64 | read-only | STP drop (EgressPackets). |
| C64 integraBifMRUdropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.60 | Counter64 | read-only | MRU drop (IngressPackets). |
| C64 integraBifMRUdropEgressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.61 | Counter64 | read-only | MRU drop (EgressPackets). |
| C64 integraBifFilterDropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.62 | Counter64 | read-only | Filter drop (IngressPackets). |
| C64 integraBifFlowClassifierDropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.63 | Counter64 | read-only | Flow classifier drop (IngressPackets). |
| C64 integraBifFlowClassifierDropEgressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.64 | Counter64 | read-only | Flow classifier drop (EgressPackets). |
| C64 integraBifIllegalSAdropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.65 | Counter64 | read-only | Illegal SA drop (IngressPackets). |
| C64 integraBifPortRateLimitDropIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.66 | Counter64 | read-only | Port rate limit drop (IngressPackets). |
| C64 integraBifPortRateLimitDropIngressBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.67 | Counter64 | read-only | Port rate limit drop (IngressBytes). |
| C64 integraBifPausePFCframesGeneratedIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.68 | Counter64 | read-only | PAUSE/PFC frames generated (IngressPackets). |
| C64 integraBifPausePFCframesGeneratedEgressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.69 | Counter64 | read-only | PAUSE/PFC frames generated (EgressPackets). |
| C64 integraBifRateLimitDropForUnknownUnicastIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.70 | Counter64 | read-only | Rate limit drop for unknown unicast (IngressPackets). |
| C64 integraBifRateLimitDropForUnknownUnicastIngressBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.71 | Counter64 | read-only | Rate limit drop for unknown unicast (IngressBytes). |
| C64 integraBifRateLimitDropForBroadcastIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.72 | Counter64 | read-only | Rate limit drop for broadcast (IngressPackets). |
| C64 integraBifRateLimitDropForBroadcastIngressBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.73 | Counter64 | read-only | Rate limit drop for broadcast (IngressBytes). |
| C64 integraBifRateLimitDropForKnownMulticastIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.74 | Counter64 | read-only | Rate limit drop for known multicast (IngressPackets). |
| C64 integraBifRateLimitDropForKnownMulticastIngressBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.75 | Counter64 | read-only | Rate limit drop for known multicast (IngressBytes). |
| C64 integraBifRateLimitDropForUnknownMulticastIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.76 | Counter64 | read-only | Rate limit drop for unknown multicast (IngressPackets). |
| C64 integraBifRateLimitDropForUnknownMulticastIngressBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.77 | Counter64 | read-only | Rate limit drop for unknown multicast (IngressBytes). |
| C64 integraBifAllCoSQoutPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.78 | Counter64 | read-only | All CoSQ outgoing packets. |
| C64 integraBifAllCoSQoutBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.79 | Counter64 | read-only | All CoSQ outgoing bytes. |
| C64 integraBifAllCoSQdroppedPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.80 | Counter64 | read-only | All CoSQ dropped packets. |
| C64 integraBifAllCoSQdroppedBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.81 | Counter64 | read-only | All CoSQ dropped bytes. |
| C64 integraBifProcessedRxPackets | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.82 | Counter64 | read-only | Processed received packets. |
| C64 integraBifProcessedRxBytes | 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.83 | Counter64 | read-only | Processed received bytes. |
| integraBifQosStatisticsTable | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3 | not-accessible | Network interface QoS statistics counters. | |
| integraBifCosqEntry | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1 | not-accessible | An entry containing network physical port status info. | |
| I32 integraBifCosqIfaceIndex | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.1 | Integer32 | read-only | A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1. |
| STR integraBifCosqIfaceDescr | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.2 | DisplayString | read-only | Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ0 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.3 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 0 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ0 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.4 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 0 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ0 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.5 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 0 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ0 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.6 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 0 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ0 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.7 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 0 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ0 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.8 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 0 for current interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ1 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.9 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 1 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ1 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.10 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 1 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ1 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.11 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 1 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ1 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.12 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 1 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ1 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.13 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 1 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ1 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.14 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 1 for current interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ2 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.15 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 2 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ2 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.16 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 2 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ2 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.17 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 2 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ2 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.18 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 2 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ2 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.19 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 2 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ2 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.20 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 2 for current interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ3 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.21 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 3 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ3 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.22 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 3 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ3 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.23 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 3 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ3 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.24 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 3 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ3 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.25 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 3 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ3 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.26 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 3 for current interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ4 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.27 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 4 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ4 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.28 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 4 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ4 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.29 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 4 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ4 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.30 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 4 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ4 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.31 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 4 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ4 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.32 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 4 for current interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ5 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.33 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 5 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ5 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.34 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 5 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ5 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.35 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 5 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ5 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.36 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 5 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ5 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.37 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 5 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ5 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.38 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 5 for current interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ6 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.39 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 6 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ6 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.40 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 6 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ6 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.41 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 6 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ6 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.42 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 6 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ6 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.43 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 6 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ6 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.44 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 6 for current interface. |
| C64 integraBifCosqStatDroppedPacketsCoSQ7 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.45 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 7 for current interface. |
| C64 integraBifCosqStatDroppedBytesCoSQ7 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.46 | Counter64 | read-only | Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 7 for current interface. |
| C64 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ7 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.47 | Counter64 | read-only | Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 7 for current interface. |
| C64 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ7 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.48 | Counter64 | read-only | Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 7 for current interface. |
| C64 integraBifCosqStatOutPacketsCoSQ7 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.49 | Counter64 | read-only | Egress packets (bcmCosqStatOutPackets) counter for CoSQ 7 for current interface. |
| C64 integraBifCosqStatOutBytesCoSQ7 | 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.50 | Counter64 | read-only | Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 7 for current interface. |
| INT integraBexecuteConfig | 1.3.6.1.4.1.7571.100.1.1.7.1.6 | INTEGER | read-write | This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower |
| INT integraBneedStore | 1.3.6.1.4.1.7571.100.1.1.7.1.7 | INTEGER | read-only | This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System |
| INT integraBstoreConfig | 1.3.6.1.4.1.7571.100.1.1.7.1.8 | INTEGER | read-write | This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error. |
| integraBnetCfg | 1.3.6.1.4.1.7571.100.1.1.7.1.9 | |||
| IP integraBnetCfgIPaddress | 1.3.6.1.4.1.7571.100.1.1.7.1.9.1 | IpAddress | read-write | Local IP address |
| IP integraBnetCfgIPmask | 1.3.6.1.4.1.7571.100.1.1.7.1.9.2 | IpAddress | read-write | Local IP mask |
| IP integraBnetCfgIPgateway | 1.3.6.1.4.1.7571.100.1.1.7.1.9.3 | IpAddress | read-write | IP gateway Send '0' or '255.255.255.255' to clear. |
| IP integraBnetCfgRemoteIPaddress | 1.3.6.1.4.1.7571.100.1.1.7.1.9.4 | IpAddress | read-only | Remote IP address |
| integraBConformance | 1.3.6.1.4.1.7571.100.1.1.7.1.10 | |||
| integraBCompliances | 1.3.6.1.4.1.7571.100.1.1.7.1.10.1 | |||
| integraBCompliance | 1.3.6.1.4.1.7571.100.1.1.7.1.10.1.1 | The compliance statement for SNMP engine which implements the SAF Tehnika Integra-B device. | ||
| integraBGroups | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2 | |||
| integraBMiscGroup | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.1 | misc data | ||
| integraBRadioGroup | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.2 | Radio group. | ||
| integraBModemGroup | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.3 | Modem group. | ||
| integraBSystemGroup | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.4 | System group. | ||
| integraBEthernetGeneralGroup | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.5 | A collection to objects, providing info applicable to all network interfaces. | ||
| integraBEthernetMiiPortGroup | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.6 | A collection of objects, providing info applicable only to MII group interfaces. | ||
| integraBEthernetQosQueueGroup | 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.7 | A collection of objects, providing info applicable to all network interface Quality of Service (QoS) queues. |
RFC description
Management MIB for SAF Integra-B microwave radio devices, providing device management and monitoring for point-to-point wireless links.
Start monitoring SAF Tehnika Integra-B microwave radio link equipment (transmit power/receive level/temperature) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.