SAF-INTEGRAX-MIB :: integraXsysServicesFwInst

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SAF-INTEGRAX-MIB › integraXsysServicesFwInst

integraXsysServicesFwInst

Module: SAF-INTEGRAX-MIB

OID (symbolic): SAF-INTEGRAX-MIB::integraXsysServicesFwInst

OID (numeric): 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Install FW version. You need check integraXsysServicesFwAvailView to see FW versions ready for install. This option only starts installation on the device and doesn't return success status for it. Usually you should wait some time while the device completes installation. SNMP won't response to quieries while upload is in progress. If FW installation was successful, integraXsysServicesFwSwitchNext will show different FW bank value for the next boot.

What is integraXsysServicesFwInst?

Installs a previously uploaded candidate firmware image, selected by slot number (candfw1(1) through candfw5(5)) from integraXsysServicesFwAvailView. Like the upload step, installation runs in the background; success is confirmed afterward by checking that integraXsysServicesFwSwitchNext now shows the other firmware bank.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8
snmpwalk -v2c -c public <target> SAF-INTEGRAX-MIB::integraXsysServicesFwInst

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8.1
snmpget -v2c -c public <target> SAF-INTEGRAX-MIB::integraXsysServicesFwInst.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8.1 i <value>

Start monitoring SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAF-INTEGRAX-MIB::integraXsysServicesFwInst OID value, configure state conditions and alerts, and monitor any SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7571safSAF-ENTERPRISE
1.3.6.1.4.1.7571.100tehnikaSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1microwaveRadioSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1pointToPointSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1.7safIntegraSAF-INTEGRA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7571.100.1.1.7.10integraXSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.4integraXsystemSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.4.46integraXsysServicesSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8integraXsysServicesFwInstSAF-INTEGRAX-MIB