SAF-INTEGRAX-MIB :: integraXifEtherStatsFragments

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SAF-INTEGRAX-MIB › integraXifEtherStatsFragments

integraXifEtherStatsFragments

Module: SAF-INTEGRAX-MIB

OID (symbolic): SAF-INTEGRAX-MIB::integraXifEtherStatsFragments

OID (numeric): 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.

What is integraXifEtherStatsFragments?

Count of received packets shorter than 64 octets that also had a bad FCS (either an integral-octet FCS error or a non-integral-octet alignment error). The DESCRIPTION notes it's normal for this counter to increment during ordinary collisions and line noise ('runts'), so isolated increments aren't automatically alarm-worthy the way a steadily climbing rate would be.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47
snmpwalk -v2c -c public <target> SAF-INTEGRAX-MIB::integraXifEtherStatsFragments

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47.1
snmpget -v2c -c public <target> SAF-INTEGRAX-MIB::integraXifEtherStatsFragments.1

Start monitoring SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAF-INTEGRAX-MIB::integraXifEtherStatsFragments OID value, configure state conditions and alerts, and monitor any SAF Tehnika Integra-X microwave radio link terminal (per-side RF configuration/temperature) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7571safSAF-ENTERPRISE
1.3.6.1.4.1.7571.100tehnikaSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1microwaveRadioSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1pointToPointSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1.7safIntegraSAF-INTEGRA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7571.100.1.1.7.10integraXSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5integraXethernetSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5.2integraXifStatisticsTableSAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1integraXifPortStcEntrySAF-INTEGRAX-MIB
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47integraXifEtherStatsFragmentsSAF-INTEGRAX-MIB