All MIBs › SAF-INTEGRAE-MIB
Organization: SAF Tehnika
Last Updated: 2020-04-25
Category: Microwave Radio - SAF Tehnika, SAF Tehnika Microwave
Description: Manages SAF Tehnika Integra-E microwave radio variant configuration and performance monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SAF-INTEGRAE-MIB?
SAF-INTEGRAE-MIB is a vendor-specific SNMP module from SAF Tehnika for its Integra-E series of point-to-point microwave radio links, part of the wireless backhaul/transmission equipment category. It exposes configuration and monitoring data organized under radio, modem, and system subtrees, covering RF transmit/receive parameters, link timing, and device identification. It is explicitly used to monitor hardware health and operating status of the radio unit, including transmit power, receive signal level, transmit/receive frequency, radio-side/duplex settings, transmit mute state and duration, and internal radio temperature — key indicators of link quality and hardware condition. As a self-contained vendor enterprise MIB it has no strong dependency on other standard MIBs beyond base SNMPv2 SMI conventions. It is typically deployed by wireless ISPs and telecom operators managing point-to-point microwave links in backhaul networks, polling the radios via SNMP to ensure link stability and detect RF or hardware degradation. Engineers can download the SAF-INTEGRAE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SAF-INTEGRAE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- SAF Tehnika Integra-E microwave radio link
Monitoring Examples
An operator would poll integraEradioTxPower and integraEradioRxLevel alongside integraEradioTxFrequency/integraEradioRxFrequency to confirm the link is transmitting/receiving at expected power and frequency; a sudden drop in integraEradioRxLevel typically signals a fade, misalignment, or obstruction on the microwave path. integraEradioTemperature can be trended to catch overheating before it causes an outage, while integraEradioTxMute and integraEradioTxMuteDuration reveal whether the transmitter has been deliberately muted (e.g., during maintenance) and for how long. The integraEradioRangesTable/integraEradioRangeEntry rows let an NMS enumerate valid operating ranges per radio side (integraEradioSide) for configuration validation.
What Can Be Monitored
- radio transmit power
- radio receive signal level
- transmit/receive frequency
- radio temperature
- transmit mute state/duration
- duplex shift configuration
This MIB depends on
Related MIBs
Imported Objects
From IANAifType-MIB
| IANAifType |
From RFC1213-MIB
| DisplayString | |
| PhysAddress |
From SAF-ENTERPRISE
| pointToPoint | OBJECT-IDENTITY |
From SAF-INTEGRA-MIB
| safIntegra | MODULE-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DateAndTime | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| integraE | 1.3.6.1.4.1.7571.100.1.1.7.9 | SAF Integra-E device management base | ||
| DAT integraEtimestamp | 1.3.6.1.4.1.7571.100.1.1.7.9.1 | DateAndTime | read-only | Last data update time |
| integraEradio | 1.3.6.1.4.1.7571.100.1.1.7.9.2 | |||
| I32 integraEradioTxPower | 1.3.6.1.4.1.7571.100.1.1.7.9.2.1 | Integer32 | read-write | Output power of radio transmitter |
| I32 integraEradioTxFrequency | 1.3.6.1.4.1.7571.100.1.1.7.9.2.2 | Integer32 | read-write | Frequency of radio transmitter |
| I32 integraEradioRxLevel | 1.3.6.1.4.1.7571.100.1.1.7.9.2.3 | Integer32 | read-only | Level of the received signal |
| INT integraEradioSide | 1.3.6.1.4.1.7571.100.1.1.7.9.2.4 | INTEGER | read-only | Radio side: Low/High |
| INT integraEradioTxMute | 1.3.6.1.4.1.7571.100.1.1.7.9.2.5 | INTEGER | read-only | Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable |
| I32 integraEradioDuplexShift | 1.3.6.1.4.1.7571.100.1.1.7.9.2.6 | Integer32 | read-only | Utilized duplex shift in kHz |
| I32 integraEradioRxFrequency | 1.3.6.1.4.1.7571.100.1.1.7.9.2.7 | Integer32 | read-only | Frequency of radio receiver |
| FIX integraEradioTemperature | 1.3.6.1.4.1.7571.100.1.1.7.9.2.8 | FixedDiv10 | read-only | Radio module temperature |
| I32 integraEradioTxMuteDuration | 1.3.6.1.4.1.7571.100.1.1.7.9.2.9 | Integer32 | read-write | Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off. |
| integraEradioRangesTable | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10 | not-accessible | Network interface port status data. | |
| integraEradioRangeEntry | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1 | not-accessible | An entry containing network physical port status info. | |
| I32 integraEradioRangeEntryIndex | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.1 | Integer32 | read-only | A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters. |
| STR integraEradioRangeDescr | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.2 | DisplayString | read-only | 'Minimal' and 'maximal' labels |
| I32 integraEradioRangeTxPower | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.3 | Integer32 | read-only | Output power ranges for radio transmitter |
| I32 integraEradioRangeTxFrequency | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.4 | Integer32 | read-only | Frequency ranges for radio transmitter |
| INT integraEradioPLL | 1.3.6.1.4.1.7571.100.1.1.7.9.2.11 | INTEGER | read-only | PLL state of local-oscillator generator |
| INT integraEradioRxLevelState | 1.3.6.1.4.1.7571.100.1.1.7.9.2.12 | INTEGER | read-only | Received signal level state |
| INT integraEradioAtpcState | 1.3.6.1.4.1.7571.100.1.1.7.9.2.13 | INTEGER | read-only | ATPC state |
| I32 integraEradioAtpcUpdatePeriod | 1.3.6.1.4.1.7571.100.1.1.7.9.2.14 | Integer32 | read-only | ATPC update period |
| I32 integraEradioAtpcRxLevelMin | 1.3.6.1.4.1.7571.100.1.1.7.9.2.15 | Integer32 | read-only | ATPC Minimal level of the received signal |
| I32 integraEradioAtpcRxLevelMax | 1.3.6.1.4.1.7571.100.1.1.7.9.2.16 | Integer32 | read-only | ATPC Maximal level of the received signal |
| integraEmodem | 1.3.6.1.4.1.7571.100.1.1.7.9.3 | |||
| INT integraEmodemAcquireStatus | 1.3.6.1.4.1.7571.100.1.1.7.9.3.1 | INTEGER | read-only | This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails. |
| FIX integraEmodemNormalizedMse | 1.3.6.1.4.1.7571.100.1.1.7.9.3.2 | FixedDiv10 | read-only | Current normalized MSE value |
| FIX integraEmodemFECload | 1.3.6.1.4.1.7571.100.1.1.7.9.3.3 | FixedDiv10 | read-only | Decoder stress or FEC load value |
| INT integraEmodemFEClocked | 1.3.6.1.4.1.7571.100.1.1.7.9.3.4 | INTEGER | read-only | FEC locked status |
| INT integraEmodemAcquireLastStatusDetails | 1.3.6.1.4.1.7571.100.1.1.7.9.3.5 | INTEGER | read-only | This is the last status of successfull or unsuccessful modem data acquire |
| FIX integraEmodemTemperature | 1.3.6.1.4.1.7571.100.1.1.7.9.3.6 | FixedDiv10 | read-only | Modem DSP temperature |
| I32 integraEmodemBandwidth | 1.3.6.1.4.1.7571.100.1.1.7.9.3.7 | Integer32 | read-only | Signal bandwidth |
| STR integraEmodemModulation | 1.3.6.1.4.1.7571.100.1.1.7.9.3.8 | DisplayString | read-only | Modulation (preferred) |
| STR integraEmodemRxModulation | 1.3.6.1.4.1.7571.100.1.1.7.9.3.9 | DisplayString | read-only | Current (actual) Rx Modulation |
| STR integraEmodemTxModulation | 1.3.6.1.4.1.7571.100.1.1.7.9.3.10 | DisplayString | read-only | Current (actual) Tx Modulation |
| I32 integraEmodemRxCapacity | 1.3.6.1.4.1.7571.100.1.1.7.9.3.11 | Integer32 | read-only | Rx ethernet capacity in kilobits per second |
| I32 integraEmodemTxCapacity | 1.3.6.1.4.1.7571.100.1.1.7.9.3.12 | Integer32 | read-only | Tx ethernet capacity in kilobits per second |
| INT integraEmodemACMBengine | 1.3.6.1.4.1.7571.100.1.1.7.9.3.13 | INTEGER | read-only | ACMB engine status |
| I32 integraEmodemCarrierOffset | 1.3.6.1.4.1.7571.100.1.1.7.9.3.14 | Integer32 | read-only | Modem carrier offset |
| C64 integraEmodemCountTime | 1.3.6.1.4.1.7571.100.1.1.7.9.3.15 | Counter64 | read-only | Modem performance count time |
| C64 integraEmodemErroredBlock | 1.3.6.1.4.1.7571.100.1.1.7.9.3.16 | Counter64 | read-only | Modem performance errored blocks |
| C64 integraEmodemErroredSecond | 1.3.6.1.4.1.7571.100.1.1.7.9.3.17 | Counter64 | read-only | Modem performance errored seconds |
| C64 integraEmodemSeverelyErroredSecond | 1.3.6.1.4.1.7571.100.1.1.7.9.3.18 | Counter64 | read-only | Modem performance severely errored seconds |
| C64 integraEmodemBackgroundBlockError | 1.3.6.1.4.1.7571.100.1.1.7.9.3.19 | Counter64 | read-only | Modem performance background block errors |
| C64 integraEmodemTotalBlockNumber | 1.3.6.1.4.1.7571.100.1.1.7.9.3.20 | Counter64 | read-only | Modem performance total block number |
| STR integraEmodemErroredSecondRatio | 1.3.6.1.4.1.7571.100.1.1.7.9.3.21 | DisplayString | read-only | Modem performance errored second ratio |
| STR integraEmodemSeverelyErroredSecondRatio | 1.3.6.1.4.1.7571.100.1.1.7.9.3.22 | DisplayString | read-only | Modem performance severely errored second ratio |
| STR integraEmodemBackgroundBlockErrorRatio | 1.3.6.1.4.1.7571.100.1.1.7.9.3.23 | DisplayString | read-only | Modem performance background block error ratio |
| C64 integraEmodemUptime | 1.3.6.1.4.1.7571.100.1.1.7.9.3.24 | Counter64 | read-only | Modem performance : uptime |
| C64 integraEmodemUnavailtime | 1.3.6.1.4.1.7571.100.1.1.7.9.3.25 | Counter64 | read-only | Modem performance : unavailtime |
| STR integraEmodemModulationACMBmin | 1.3.6.1.4.1.7571.100.1.1.7.9.3.26 | DisplayString | read-only | Minimal modulation for ACMB enabled profile |
| STR integraEmodemModulationACMBmax | 1.3.6.1.4.1.7571.100.1.1.7.9.3.27 | DisplayString | read-only | Maximal modulation for ACMB enabled profile |
| integraEsystem | 1.3.6.1.4.1.7571.100.1.1.7.9.4 | |||
| FIX integraEsysCPUtemperature | 1.3.6.1.4.1.7571.100.1.1.7.9.4.2 | FixedDiv10 | read-only | System CPU temperature |
| G32 integraEsysLicenseExpire | 1.3.6.1.4.1.7571.100.1.1.7.9.4.3 | Gauge32 | read-only | License expires after number of seconds. In the case of -1, check licenseGenStatus status |
| INT integraEsysLicenseGenStatus | 1.3.6.1.4.1.7571.100.1.1.7.9.4.4 | INTEGER | read-only | License General status. |
| I32 integraEsysPSUvoltage | 1.3.6.1.4.1.7571.100.1.1.7.9.4.5 | Integer32 | read-only | Power voltage in mV |
| I32 integraEsysPSUcurrent | 1.3.6.1.4.1.7571.100.1.1.7.9.4.6 | Integer32 | read-only | Power current in mA |
| I32 integraEsysPSUpower | 1.3.6.1.4.1.7571.100.1.1.7.9.4.7 | Integer32 | read-only | Power consumption in mW |
| FIX integraEsysBoardTemperature | 1.3.6.1.4.1.7571.100.1.1.7.9.4.8 | FixedDiv10 | read-only | System temperature |
| FIX integraEsysFreeMemory | 1.3.6.1.4.1.7571.100.1.1.7.9.4.9 | FixedDiv10 | read-only | System free memory |
| FIX integraEsysCPUidle | 1.3.6.1.4.1.7571.100.1.1.7.9.4.10 | FixedDiv10 | read-only | System CPU idle |
| STR integraEsysDeviceType | 1.3.6.1.4.1.7571.100.1.1.7.9.4.11 | DisplayString | read-only | Device type name |
| STR integraEsysDeviceSerial | 1.3.6.1.4.1.7571.100.1.1.7.9.4.12 | DisplayString | read-only | Device serial number |
| STR integraEsysDeviceProductModel | 1.3.6.1.4.1.7571.100.1.1.7.9.4.13 | DisplayString | read-only | Device product model code |
| BIT integraEsysFanError | 1.3.6.1.4.1.7571.100.1.1.7.9.4.14 | Bits | read-only | Device fan 1 error status |
| FIX integraEsysXADCtemperature | 1.3.6.1.4.1.7571.100.1.1.7.9.4.15 | FixedDiv10 | read-only | XADC Temperature |
| FIX integraEsysVCCint | 1.3.6.1.4.1.7571.100.1.1.7.9.4.16 | FixedDiv20 | read-only | Vcc INT |
| FIX integraEsysVCCaux | 1.3.6.1.4.1.7571.100.1.1.7.9.4.17 | FixedDiv20 | read-only | Vcc AUX |
| FIX integraEsysVCCbram | 1.3.6.1.4.1.7571.100.1.1.7.9.4.18 | FixedDiv20 | read-only | Vcc BRAM |
| FIX integraEsysVCCpint | 1.3.6.1.4.1.7571.100.1.1.7.9.4.19 | FixedDiv20 | read-only | Vcc PINT |
| FIX integraEsysVCCpaux | 1.3.6.1.4.1.7571.100.1.1.7.9.4.20 | FixedDiv20 | read-only | Vcc PAUX |
| FIX integraEsysVCCoddr | 1.3.6.1.4.1.7571.100.1.1.7.9.4.21 | FixedDiv20 | read-only | Vcc ODDR |
| FIX integraEsysXadc6v0AvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.22 | FixedDiv20 | read-only | XADC_6V0_AVDD_M - Modem Analog |
| FIX integraEsysXadc1v0AvddSwAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.23 | FixedDiv20 | read-only | XADC_1V0_AVDD_S - Switch Analog |
| FIX integraEsysXadc1v0AvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.24 | FixedDiv20 | read-only | XADC_1V0_AVDD_M - Modem Analog |
| FIX integraEsysXadc1v0DvddMdmDig | 1.3.6.1.4.1.7571.100.1.1.7.9.4.25 | FixedDiv20 | read-only | XADC_1V0_DVDD_M - Modem Digital |
| FIX integraEsysXadc1v0CoreMdmDig | 1.3.6.1.4.1.7571.100.1.1.7.9.4.26 | FixedDiv20 | read-only | XADC_1V0_CORE_M - Modem Digital |
| FIX integraEsysXadc2v5EnvAdcAvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.27 | FixedDiv20 | read-only | XADC_2V5_ENVADC_AVDD - Modem Analog |
| FIX integraEsysXadc1v0CoreSwDig | 1.3.6.1.4.1.7571.100.1.1.7.9.4.28 | FixedDiv20 | read-only | XADC_1V0_CORE_S - Switch Digital |
| FIX integraEsysXadc5v0IqAvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.29 | FixedDiv20 | read-only | XADC_5V0_IQ_AVDD - Modem Analog |
| FIX integraEsysXadc2v5WbDacClAvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.30 | FixedDiv20 | read-only | XADC_2V5_WBDAC_CL_AVDD - Modem Analog |
| FIX integraEsysXadc1v2VccPhyDig | 1.3.6.1.4.1.7571.100.1.1.7.9.4.31 | FixedDiv20 | read-only | XADC_1V2_VCC - PHY Digital |
| FIX integraEsysXadc4v6AfeDacAvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.32 | FixedDiv20 | read-only | XADC_4V6_AFE_DAC_AVDD - Modem Analog |
| FIX integraEsysXadc2v5WbDacAvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.33 | FixedDiv20 | read-only | XADC_2V5_WBDAC_AVDD - Modem Analog |
| FIX integraEsysXadc2v5VccSysDig | 1.3.6.1.4.1.7571.100.1.1.7.9.4.34 | FixedDiv20 | read-only | XADC_2V5_VCC - System Digital |
| FIX integraEsysXadc3v3VccSysDig | 1.3.6.1.4.1.7571.100.1.1.7.9.4.35 | FixedDiv20 | read-only | XADC_3V3_VCC - System Digital |
| FIX integraEsysXadc1v5Ddr3Sw | 1.3.6.1.4.1.7571.100.1.1.7.9.4.36 | FixedDiv20 | read-only | XADC_1V5_DDR3_S - Switch DDR3 |
| FIX integraEsysXadc2v5WbAdcAvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.37 | FixedDiv20 | read-only | XADC_2V5_WBADC_AVDD - Modem Analog |
| FIX integraEsysXadc2v5WbDacPllAvddMdmAna | 1.3.6.1.4.1.7571.100.1.1.7.9.4.38 | FixedDiv20 | read-only | XADC_2V5_WBDAC_PLL_AVDD - Modem Analog |
| integraEethernet | 1.3.6.1.4.1.7571.100.1.1.7.9.5 | |||
| integraEifStatusTable | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1 | not-accessible | Network interface port status data. | |
| integraEifPortEntry | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1 | not-accessible | An entry containing network physical port status info. | |
| I32 integraEifPortStatIndex | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.1 | Integer32 | read-only | A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1. |
| STR integraEifPortStatDescr | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.2 | DisplayString | read-only | Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port. |
| IAN integraEifPortType | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.3 | IANAifType | read-only | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| I32 integraEifPortMtu | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.4 | Integer32 | read-only | Maximum transmission unit value in bytes. |
| G32 integraEifPortHighSpeed | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.5 | Gauge32 | read-only | Link speed in 1 000 000 * bits per second. |
| PHY integraEifPortPhysAddress | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.6 | PhysAddress | read-only | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. |
| INT integraEifPortAdminStatus | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.7 | INTEGER | read-only | Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received). |
| INT integraEifPortOperStatus | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.8 | INTEGER | read-only | Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state. |
| TIK integraEifPortLastChange | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.9 | TimeTicks | read-only | This parameter value is always 0 at the moment. |
| INT integraEifPortAutoneg | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.10 | INTEGER | read-only | Auto-negotiation status. Unknown means no info was received. |
| INT integraEifPortDuplex | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.11 | INTEGER | read-only | Duplex status for the interface. |
| INT integraEifPortSyncEthActive | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.12 | INTEGER | read-only | Synchronous Ethernet status. Can be active(1) or inactive(0). |
| I32 integraEifPortSyncEthPrio | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.13 | Integer32 | read-only | Synchronous Ethernet priority. |
| INT integraEifPortFlowControl | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.14 | INTEGER | read-only | Flow control status. |
| integraEifStatisticsTable | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2 | not-accessible | Network interface port statistics data. | |
| integraEifPortStcEntry | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1 | not-accessible | An entry containing network physical port statistics counter data. | |
| I32 integraEifPortStcIndex | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.1 | Integer32 | read-only | A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1. |
| STR integraEifPortStcDescr | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.2 | DisplayString | read-only | Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface. |
| TIK integraEifTimePassed | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.3 | TimeTicks | read-only | Statistics collection time. |
| C64 integraEifIngressPackets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.4 | Counter64 | read-only | Packets that ingress on the port. |
| C64 integraEifIngressBytes | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.5 | Counter64 | read-only | Bytes that ingress on the port. |
| C64 integraEifEgressPackets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.6 | Counter64 | read-only | Packets that egress on the port. |
| C64 integraEifEgressBytes | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.7 | Counter64 | read-only | Bytes that egress on the port. |
| C64 integraEifEtherStatsMulticastPkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.8 | Counter64 | read-only | The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address. |
| C64 integraEifEtherStatsBroadcastPkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.9 | Counter64 | read-only | The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets. |
| C64 integraEifEtherStatsPkts64Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.10 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets). |
| C64 integraEifEtherStatsPkts65to127Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.11 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifEtherStatsPkts128to255Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.12 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifEtherStatsPkts256to511Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.13 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifEtherStatsPkts512to1023Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.14 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifEtherStatsPkts1024to1518Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.15 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifEtherStatsOversizePkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.16 | Counter64 | read-only | The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. |
| C64 integraEifEtherRxOversizePkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.17 | Counter64 | read-only | The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. |
| C64 integraEifEtherTxOversizePkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.18 | Counter64 | read-only | The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. |
| C64 integraEifEtherStatsOctets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.19 | Counter64 | read-only | Total number of octets of data (including those in bad packets) both received and transmitted. |
| C64 integraEifEtherStatsPkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.20 | Counter64 | read-only | Total number of packets (including bad packets) both received and transmitted. |
| C64 integraEifEtherStatsTXNoErrors | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.21 | Counter64 | read-only | Number of packets that were transmitted without errors. |
| C64 integraEifEtherStatsRXNoErrors | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.22 | Counter64 | read-only | Number of packets that were received without errors. |
| C64 integraEifEtherStatsPkts1519to1522Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.23 | Counter64 | read-only | The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifIfInOctets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.24 | Counter64 | read-only | Total number of octets of data (including those in bad packets) that were received. |
| C64 integraEifIfOutOctets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.25 | Counter64 | read-only | Total number of octets of data (including those in bad packets) that were transmitted. |
| C64 integraEifDot1dTpPortInFrames | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.26 | Counter64 | read-only | The number of frames that have been received by this port from its segment. |
| C64 integraEifDot1dTpPortOutFrames | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.27 | Counter64 | read-only | The number of frames that have been transmitted by this port to its segment. |
| C64 integraEifReceivedPkts64Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.28 | Counter64 | read-only | Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets). |
| C64 integraEifTransmittedPkts64Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.29 | Counter64 | read-only | Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets). |
| C64 integraEifReceivedPkts65to127Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.30 | Counter64 | read-only | Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifTransmittedPkts65to127Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.31 | Counter64 | read-only | Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifReceivedPkts128to255Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.32 | Counter64 | read-only | Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifTransmittedPkts128to255Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.33 | Counter64 | read-only | Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifReceivedPkts256to511Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.34 | Counter64 | read-only | Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifTransmittedPkts256to511Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.35 | Counter64 | read-only | Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifReceivedPkts512to1023Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.36 | Counter64 | read-only | Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifTransmittedPkts512to1023Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.37 | Counter64 | read-only | Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifReceivedPkts1024to1518Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.38 | Counter64 | read-only | Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifTransmittedPkts1024to1518Octets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.39 | Counter64 | read-only | Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
| C64 integraEifIfInBroadcastPkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.40 | Counter64 | read-only | The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets. |
| C64 integraEifIfOutBroadcastPkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.41 | Counter64 | read-only | The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets. |
| C64 integraEifIfInMulticastPkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.42 | Counter64 | read-only | The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets. |
| C64 integraEifIfOutMulticastPkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.43 | Counter64 | read-only | The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets. |
| C64 integraEifDot3InPauseFrames | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.44 | Counter64 | read-only | A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. |
| C64 integraEifDot3OutPauseFrames | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.45 | Counter64 | read-only | A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. |
| C64 integraEifEtherStatsUndersizePkts | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.46 | Counter64 | read-only | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| C64 integraEifEtherStatsFragments | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.47 | Counter64 | read-only | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits. |
| C64 integraEifEtherStatsCRCAlignErrors | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.48 | Counter64 | read-only | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
| C64 integraEifEtherStatsJabbers | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.49 | Counter64 | read-only | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms. |
| I32 integraEifIngressBPS | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.50 | Integer32 | read-only | Ingoing data transfer rate in bytes per second. |
| I32 integraEifIngressPPS | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.51 | Integer32 | read-only | Ingoing data transfer rate in packets per second. |
| I32 integraEifEgressBPS | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.52 | Integer32 | read-only | Outgoing data transfer rate in bytes per second. |
| I32 integraEifEgressPPS | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.53 | Integer32 | read-only | Outgoing data transfer rate in packets per second. |
| C64 integraEifAllCoSQoutPackets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.54 | Counter64 | read-only | All CoSQ outgoing packets. |
| C64 integraEifAllCoSQoutBytes | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.55 | Counter64 | read-only | All CoSQ outgoing bytes. |
| C64 integraEifAllCoSQdroppedPackets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.56 | Counter64 | read-only | All CoSQ dropped packets. |
| C64 integraEifAllCoSQdroppedBytes | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.57 | Counter64 | read-only | All CoSQ dropped bytes. |
| C64 integraEifProcessedRxPackets | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.58 | Counter64 | read-only | Processed received packets. |
| C64 integraEifProcessedRxBytes | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.59 | Counter64 | read-only | Processed received bytes. |
| INT integraEifLspPortAdminState | 1.3.6.1.4.1.7571.100.1.1.7.9.5.3 | INTEGER | read-only | LSP port status. |
| BIT integraEifLspPortList | 1.3.6.1.4.1.7571.100.1.1.7.9.5.4 | Bits | read-only | LSP port status. |
| INT integraEifLspPortStatus | 1.3.6.1.4.1.7571.100.1.1.7.9.5.5 | INTEGER | read-only | LSP port status. |
| INT integraEexecuteConfig | 1.3.6.1.4.1.7571.100.1.1.7.9.6 | INTEGER | read-write | This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower |
| INT integraEneedStore | 1.3.6.1.4.1.7571.100.1.1.7.9.7 | INTEGER | read-only | This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System |
| INT integraEstoreConfig | 1.3.6.1.4.1.7571.100.1.1.7.9.8 | INTEGER | read-write | This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error. |
| integraEnetCfg | 1.3.6.1.4.1.7571.100.1.1.7.9.9 | |||
| STR integraEnetCfgIPaddress | 1.3.6.1.4.1.7571.100.1.1.7.9.9.1 | DisplayString | read-write | Local IP address |
| STR integraEnetCfgIPmask | 1.3.6.1.4.1.7571.100.1.1.7.9.9.2 | DisplayString | read-write | Local IP mask |
| STR integraEnetCfgIPgateway | 1.3.6.1.4.1.7571.100.1.1.7.9.9.3 | DisplayString | read-write | IP gateway Send '0' or '255.255.255.255' to clear. |
| STR integraEnetCfgRemoteIPaddress | 1.3.6.1.4.1.7571.100.1.1.7.9.9.4 | DisplayString | read-only | Remote IP address |
| integraEConformance | 1.3.6.1.4.1.7571.100.1.1.7.9.10 | |||
| integraECompliances | 1.3.6.1.4.1.7571.100.1.1.7.9.10.1 | |||
| integraECompliance | 1.3.6.1.4.1.7571.100.1.1.7.9.10.1.1 | The compliance statement for SNMP engine which implements the SAF Tehnika Integra-E device. | ||
| integraEGroups | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2 | |||
| integraEMiscGroup | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.1 | misc data | ||
| integraERadioGroup | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.2 | Radio group. | ||
| integraEModemGroup | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.3 | Modem group. | ||
| integraESystemGroup | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.4 | System group. | ||
| integraEEthernetGeneralGroup | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.5 | A collection to objects, providing info applicable to all network interfaces. | ||
| integraEEthernetMiiPortGroup | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.6 | A collection of objects, providing info applicable only to MII group interfaces. |
RFC description
Integrae Systems fault management MIB defining objects for network fault detection, analysis, and event management (vendor-private).
Start monitoring SAF Tehnika Integra-E microwave radio link (RF transmit/receive/temperature status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.