SAF-INTEGRAW-MIB

All MIBs › SAF-INTEGRAW-MIB

Organization: SAF Tehnika

Last Updated: 2016-05-11

Category: Microwave Radio - SAF Tehnika, SAF Tehnika Microwave

Description: Manages SAF Tehnika Integra-W microwave radio variant configuration and performance monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SAF-INTEGRAW-MIB?

SAF-INTEGRAW-MIB manages SAF Tehnika's IntegraW point-to-point microwave radio link product, exposing configuration and performance objects for the radio's transmit/receive path. It covers RF configuration (frequency, duplex shift, mute state) and performance data (transmit power, receive signal level, temperature) for each radio side. Its central monitoring value is radio hardware health and link performance: operators track integraWradioTxPower and integraWradioRxLevel to gauge link quality and fade margin, and integraWradioTemperature to watch for thermal issues in outdoor radio units, alongside mute state which indicates whether the transmitter is intentionally silenced. As a vendor-specific radio MIB it has no significant dependency on other standard MIBs beyond basic SNMP. It is deployed in microwave backhaul links for wireless/telecom operators using SAF Tehnika IntegraW radios at both ends of a point-to-point path. Engineers can download the SAF-INTEGRAW-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SAF-INTEGRAW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SAF Tehnika IntegraW microwave radio link

Monitoring Examples

Polling integraWradioTxPower and integraWradioRxLevel on both the local and remote integraWradioSide reveals whether a link is degrading (e.g., falling RX level indicating rain fade or antenna misalignment). integraWradioTemperature can be checked to catch an overheating outdoor unit, and integraWradioTxMute/integraWradioTxMuteDuration show whether the transmitter has been muted and for how long, which would explain an unexpected loss of the radio link.

What Can Be Monitored

transmit power
receive signal level
radio temperature
transmit mute state/duration
duplex shift setting

Imported Objects

From IANAifType-MIB

IANAifType

From SAF-ENTERPRISE

pointToPoint

OBJECT-IDENTITY

From SAF-INTEGRA-MIB

safIntegra

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
integraW	1.3.6.1.4.1.7571.100.1.1.7.2			SAF IntegraW radio management base
DAT integraWtimestamp	1.3.6.1.4.1.7571.100.1.1.7.2.1	DateAndTime	read-only	Last data update time
integraWradio	1.3.6.1.4.1.7571.100.1.1.7.2.2
I32 integraWradioTxPower	1.3.6.1.4.1.7571.100.1.1.7.2.2.1	Integer32	read-write	Output power of radio transmitter
I32 integraWradioTxFrequency	1.3.6.1.4.1.7571.100.1.1.7.2.2.2	Integer32	read-write	Frequency of radio transmitter
I32 integraWradioRxLevel	1.3.6.1.4.1.7571.100.1.1.7.2.2.3	Integer32	read-only	Level of the received signal
INT integraWradioSide	1.3.6.1.4.1.7571.100.1.1.7.2.2.4	INTEGER	read-only	Radio side: Low/High
INT integraWradioTxMute	1.3.6.1.4.1.7571.100.1.1.7.2.2.5	INTEGER	read-only	Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable
I32 integraWradioDuplexShift	1.3.6.1.4.1.7571.100.1.1.7.2.2.6	Integer32	read-only	Utilized duplex shift in kHz
I32 integraWradioRxFrequency	1.3.6.1.4.1.7571.100.1.1.7.2.2.7	Integer32	read-only	Frequency of radio receiver
I32 integraWradioTemperature	1.3.6.1.4.1.7571.100.1.1.7.2.2.8	Integer32	read-only	Radio module temperature *10 Celsius
I32 integraWradioTxMuteDuration	1.3.6.1.4.1.7571.100.1.1.7.2.2.9	Integer32	read-write	Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
integraWradioRangesTable	1.3.6.1.4.1.7571.100.1.1.7.2.2.10		not-accessible	Network interface port status data.
integraWradioRangeEntry	1.3.6.1.4.1.7571.100.1.1.7.2.2.10.1		not-accessible	An entry containing network physical port status info.
I32 integraWradioRangeEntryIndex	1.3.6.1.4.1.7571.100.1.1.7.2.2.10.1.1	Integer32	read-only	A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
STR integraWradioRangeDescr	1.3.6.1.4.1.7571.100.1.1.7.2.2.10.1.2	DisplayString	read-only	'Minimal' and 'maximal' labels
I32 integraWradioRangeTxPower	1.3.6.1.4.1.7571.100.1.1.7.2.2.10.1.3	Integer32	read-only	Output power ranges for integraWradio transmitter
I32 integraWradioRangeTxFrequency	1.3.6.1.4.1.7571.100.1.1.7.2.2.10.1.4	Integer32	read-only	Frequency ranges for integraWradio transmitter
INT integraWradioPLL	1.3.6.1.4.1.7571.100.1.1.7.2.2.11	INTEGER	read-only	PLL state of local-oscillator generator
INT integraWradioRxLevelState	1.3.6.1.4.1.7571.100.1.1.7.2.2.12	INTEGER	read-only	Received signal level state
integraWmodem	1.3.6.1.4.1.7571.100.1.1.7.2.3
INT integraWmodemAcquireStatus	1.3.6.1.4.1.7571.100.1.1.7.2.3.1	INTEGER	read-only	This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails.
I32 integraWmodemMse	1.3.6.1.4.1.7571.100.1.1.7.2.3.2	Integer32	read-only	Current MSE value (floating point value multiplied by 10)
STR integraWmodemFecLoad	1.3.6.1.4.1.7571.100.1.1.7.2.3.3	DisplayString	read-only	Decoder stress or FEC load value (floating point in textual representation)
INT integraWmodemSyncLoss	1.3.6.1.4.1.7571.100.1.1.7.2.3.4	INTEGER	read-only	Modem synchronization status
I32 integraWmodemBandwidth	1.3.6.1.4.1.7571.100.1.1.7.2.3.6	Integer32	read-only	Signal bandwidth
STR integraWmodemModulation	1.3.6.1.4.1.7571.100.1.1.7.2.3.7	DisplayString	read-only	Modulation (preferred)
STR integraWmodemRxModulation	1.3.6.1.4.1.7571.100.1.1.7.2.3.8	DisplayString	read-only	Current (actual) Rx Modulation
STR integraWmodemTxModulation	1.3.6.1.4.1.7571.100.1.1.7.2.3.9	DisplayString	read-only	Current (actual) Tx Modulation
I32 integraWmodemRxCapacity	1.3.6.1.4.1.7571.100.1.1.7.2.3.10	Integer32	read-only	Rx ethernet capacity in kilobits per second
I32 integraWmodemTxCapacity	1.3.6.1.4.1.7571.100.1.1.7.2.3.11	Integer32	read-only	Tx ethernet capacity in kilobits per second
INT integraWmodemAcmEngine	1.3.6.1.4.1.7571.100.1.1.7.2.3.12	INTEGER	read-only	ACM engine status
I32 integraWmodemSignalQuality	1.3.6.1.4.1.7571.100.1.1.7.2.3.14	Integer32	read-only	Modem signal quality in %
integraWsystem	1.3.6.1.4.1.7571.100.1.1.7.2.4
I32 integraWsysCPUtemperature	1.3.6.1.4.1.7571.100.1.1.7.2.4.2	Integer32	read-only	System CPU temperature *10 Celsius
G32 integraWsysLicenseExpire	1.3.6.1.4.1.7571.100.1.1.7.2.4.3	Gauge32	read-only	License expires after number of seconds. In the case of -1, check licenseGenStatus status
INT integraWsysLicenseGenStatus	1.3.6.1.4.1.7571.100.1.1.7.2.4.4	INTEGER	read-only	License General status.
I32 integraWsysPSUvoltage	1.3.6.1.4.1.7571.100.1.1.7.2.4.5	Integer32	read-only	Power voltage in mV
I32 integraWsysPSUcurrent	1.3.6.1.4.1.7571.100.1.1.7.2.4.6	Integer32	read-only	Power current in mA
I32 integraWsysPSUpower	1.3.6.1.4.1.7571.100.1.1.7.2.4.7	Integer32	read-only	Power consumption in mW
I32 integraWsysBoardTemperature	1.3.6.1.4.1.7571.100.1.1.7.2.4.8	Integer32	read-only	System temperature *10 Celsius
I32 integraWsysFreeMemory	1.3.6.1.4.1.7571.100.1.1.7.2.4.9	Integer32	read-only	System free memory *10 %
I32 integraWsysCPUidle	1.3.6.1.4.1.7571.100.1.1.7.2.4.10	Integer32	read-only	System CPU idle *10 %
integraWethernet	1.3.6.1.4.1.7571.100.1.1.7.2.5
integraWifStatusTable	1.3.6.1.4.1.7571.100.1.1.7.2.5.1		not-accessible	Network interface port status data.
integraWifPortEntry	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1		not-accessible	An entry containing network physical port status info.
I32 integraWifPortStatIndex	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.1	Integer32	read-only	A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
STR integraWifPortStatDescr	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.2	DisplayString	read-only	Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port.
IAN integraWifPortType	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.3	IANAifType	read-only	The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
I32 integraWifPortMtu	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.4	Integer32	read-only	Maximum transmission unit value in bytes.
G32 integraWifPortSpeed	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.5	Gauge32	read-only	Link speed in bits per second.
PHY integraWifPortPhysAddress	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.6	PhysAddress	read-only	The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
INT integraWifPortAdminStatus	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.7	INTEGER	read-only	Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received).
INT integraWifPortOperStatus	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.8	INTEGER	read-only	Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state.
TIK integraWifPortLastChange	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.9	TimeTicks	read-only	This parameter value is always 0 at the moment.
INT integraWifPortAutoneg	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.10	INTEGER	read-only	Auto-negotiation status. Unknown means no info was received.
INT integraWifPortDuplex	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.11	INTEGER	read-only	Duplex status for the interface.
INT integraWifPortSyncEthActive	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.12	INTEGER	read-only	Synchronous Ethernet status. Can be active(1) or inactive(0).
I32 integraWifPortSyncEthPrio	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.13	Integer32	read-only	Synchronous Ethernet priority.
INT integraWifPortFlowControl	1.3.6.1.4.1.7571.100.1.1.7.2.5.1.1.14	INTEGER	read-only	Flow control status.
integraWifStatisticsTable	1.3.6.1.4.1.7571.100.1.1.7.2.5.2		not-accessible	Network interface port statistics data.
integraWifPortStcEntry	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1		not-accessible	An entry containing network physical port statistics counter data.
I32 integraWifPortStcIndex	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.1	Integer32	read-only	A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
STR integraWifPortStcDescr	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.2	DisplayString	read-only	Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
TIK integraWifTimePassed	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.3	TimeTicks	read-only	Statistics collection time.
C64 integraWrxDetected	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.4	Counter64	read-only	Detected ingoing packets counter.
C64 integraWrxDropped	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.5	Counter64	read-only	Dropped ingoing packets counter.
C64 integraWtxDetected	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.6	Counter64	read-only	Detected outgoing packets counter.
C64 integraWtxDropped	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.7	Counter64	read-only	Dropped outgoing packets counter.
C64 integraWrxBytes	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.8	Counter64	read-only	Ingoing bytes counter.
C64 integraWtxBytes	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.9	Counter64	read-only	Outgoing bytes counter.
C64 integraWrx64Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.10	Counter64	read-only
C64 integraWrx65to127Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.11	Counter64	read-only
C64 integraWrx128to255Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.12	Counter64	read-only
C64 integraWrx256to511Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.13	Counter64	read-only
C64 integraWrx512to1023Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.14	Counter64	read-only
C64 integraWrx1024toMaxFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.15	Counter64	read-only
C64 integraWrxUsizeFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.16	Counter64	read-only
C64 integraWrxOsizeFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.17	Counter64	read-only
C64 integraWtx64Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.18	Counter64	read-only
C64 integraWtx65to127Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.19	Counter64	read-only
C64 integraWtx128to255Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.20	Counter64	read-only
C64 integraWtx256to511Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.21	Counter64	read-only
C64 integraWtx512to1023Frames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.22	Counter64	read-only
C64 integraWtx1024toMaxFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.23	Counter64	read-only
C64 integraWtxUsizeFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.24	Counter64	read-only
C64 integraWtxOsizeFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.25	Counter64	read-only
C64 integraWrxGoodFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.26	Counter64	read-only
C64 integraWrxErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.27	Counter64	read-only
C64 integraWrxFifoErr	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.28	Counter64	read-only
C64 integraWrxCRCErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.29	Counter64	read-only
C64 integraWrxBcastFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.30	Counter64	read-only
C64 integraWrxMcastFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.31	Counter64	read-only
C64 integraWrxCntrlFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.32	Counter64	read-only
C64 integraWrxLenErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.33	Counter64	read-only
C64 integraWrxVlanFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.34	Counter64	read-only
C64 integraWrxPauseFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.35	Counter64	read-only
C64 integraWrxOpErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.36	Counter64	read-only
C64 integraWrxFrameErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.37	Counter64	read-only
C64 integraWtxGoodFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.38	Counter64	read-only
C64 integraWtxErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.39	Counter64	read-only
C64 integraWtxFifoErr	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.40	Counter64	read-only
C64 integraWtxBcastFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.41	Counter64	read-only
C64 integraWtxMcastFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.42	Counter64	read-only
C64 integraWtxUrunErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.43	Counter64	read-only
C64 integraWtxCntrlFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.44	Counter64	read-only
C64 integraWtxVlanFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.45	Counter64	read-only
C64 integraWtxPauseFrames	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.46	Counter64	read-only
C64 integraWtxSingleCollisions	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.47	Counter64	read-only
C64 integraWtxMultiCollisions	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.48	Counter64	read-only
C64 integraWtxDeferred	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.49	Counter64	read-only
C64 integraWtxLateCollisions	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.50	Counter64	read-only
C64 integraWtxExcessCollisions	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.51	Counter64	read-only
C64 integraWtxExcessDeferral	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.52	Counter64	read-only
C64 integraWtxAlignErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.53	Counter64	read-only
C64 integraWtxCarrierErrors	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.54	Counter64	read-only
C64 integraWtxCollisions	1.3.6.1.4.1.7571.100.1.1.7.2.5.2.1.55	Counter64	read-only
INT integraWexecuteConfig	1.3.6.1.4.1.7571.100.1.1.7.2.6	INTEGER	read-write	This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower
INT integraWneedStore	1.3.6.1.4.1.7571.100.1.1.7.2.7	INTEGER	read-only	This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System
INT integraWstoreConfig	1.3.6.1.4.1.7571.100.1.1.7.2.8	INTEGER	read-write	This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error.
integraWnetCfg	1.3.6.1.4.1.7571.100.1.1.7.2.9
IP integraWnetCfgIPaddress	1.3.6.1.4.1.7571.100.1.1.7.2.9.1	IpAddress	read-write	Local IP address
IP integraWnetCfgIPmask	1.3.6.1.4.1.7571.100.1.1.7.2.9.2	IpAddress	read-write	Local IP mask
IP integraWnetCfgIPgateway	1.3.6.1.4.1.7571.100.1.1.7.2.9.3	IpAddress	read-write	IP gateway Send '0' or '255.255.255.255' to clear.
IP integraWnetCfgRemoteIPaddress	1.3.6.1.4.1.7571.100.1.1.7.2.9.4	IpAddress	read-only	Remote IP address
integraWConformance	1.3.6.1.4.1.7571.100.1.1.7.2.10
integraWCompliances	1.3.6.1.4.1.7571.100.1.1.7.2.10.1
integraWCompliance	1.3.6.1.4.1.7571.100.1.1.7.2.10.1.1			The compliance statement for SNMP engine which implements the SAF Tehnika Integra-W device.
integraWGroups	1.3.6.1.4.1.7571.100.1.1.7.2.10.2
integraWMiscGroup	1.3.6.1.4.1.7571.100.1.1.7.2.10.2.1			misc data
integraWRadioGroup	1.3.6.1.4.1.7571.100.1.1.7.2.10.2.2			Radio group.
integraWModemGroup	1.3.6.1.4.1.7571.100.1.1.7.2.10.2.3			Modem group.
integraWSystemGroup	1.3.6.1.4.1.7571.100.1.1.7.2.10.2.4			System group.
integraWEthernetGeneralGroup	1.3.6.1.4.1.7571.100.1.1.7.2.10.2.5			A collection to objects, providing info applicable to all network interfaces.
integraWEthernetMiiPortGroup	1.3.6.1.4.1.7571.100.1.1.7.2.10.2.6			A collection of objects, providing info applicable only to MII group interfaces.

RFC description

Manages SAF IntegraW point-to-point microwave radio equipment including link status, signal quality, and performance metrics.

Start monitoring SAF Tehnika IntegraW microwave radio link (transmit power/receive level/temperature) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SAF-INTEGRAW-MIB

What Is SAF-INTEGRAW-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description