RBN-QOS-MIB

All MIBs › RBN-QOS-MIB

Organization: Redback Networks, Inc.

Last Updated: 2007-07-30

Category: QoS and Traffic Management, Vendor: Ericsson

Description: Manages Quality of Service policy maps, class maps, and traffic shaping parameters on Redback SmartEdge BRAS.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RBN-QOS-MIB?

RBN-QOS-MIB is a Redback Networks (Ericsson) SmartEdge enterprise MIB defining statistical counters for monitoring Quality-of-Service-enabled subscriber circuits and IF-MIB interface layers (including standard, high-capacity, and very-high-capacity packet groups). It exposes per-interface traffic counters covering inbound/outbound octets and dropped octets, plus per-queue statistics, giving visibility into how QoS policies are actually performing traffic shaping and congestion management. This supports performance/software-behavior monitoring rather than physical hardware sensors: administrators can spot QoS-related packet drops or queue congestion that would otherwise silently degrade subscriber service quality. It explicitly extends the standard IETF IF-MIB packet-group counters (ifPacketGroup/ifHCPacketGroup/ifVHCPacketGroup) with QoS-specific drop statistics, so it has a clear dependency on IF-MIB conventions. It is deployed on SmartEdge BRAS/edge routers wherever QoS is enabled on subscriber-facing interfaces. Engineers can download the RBN-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RBN-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson/Redback SmartEdge BRAS
SmartEdge multi-service edge router

Monitoring Examples

An operator polls rbnQosInterfaceTable/rbnQosInterfaceEntry to compare rbnQosIfInOctets/rbnQosIfHCInOctets and rbnQosIfOutOctets/rbnQosIfHCOutOctets against rbnQosIfInDroppedOctets/rbnQosIfOutDroppedOctets (and their HC counterparts) to calculate a drop rate per interface. A rising drop rate together with data from rbnQosInterfaceQueueStatsTable/rbnQosInterfaceQueueStatsEntry pinpoints which specific queue is congested, indicating an under-provisioned QoS policy or an oversubscribed link.

What Can Be Monitored

per-interface in/out octets (incl. high-capacity)
in/out dropped octets
per-queue statistics
QoS-enabled circuit traffic

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From RBN-SMI

rbnMgmt

OBJECT-IDENTITY

From RBN-SUBSCRIBER-ACTIVE-MIB

rbnSubsActiveName	OBJECT-TYPE
rbnSubsActiveSessionId	OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using rbnQosIfInOctets OID:

Select an Ericsson/Redback SmartEdge BRAS router (QoS-enabled subscriber circuit traffic/drop statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rbnQosIfInOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of post-limited octets received on the interface, including framing characters. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rbnQosCompliance	1.3.6.1.4.1.2352.2.22.2.1.1			The compliance statement for SNMP entities which implement the Redback QOS MIB.
rbnQosCompliance2	1.3.6.1.4.1.2352.2.22.2.1.2			The compliance statement for SNMP entities which implement the Redback QOS MIB.
rbnQosCompliance3	1.3.6.1.4.1.2352.2.22.2.1.3			The compliance statement for SNMP entities which implement the Redback QOS MIB.
rbnQosCompliance4	1.3.6.1.4.1.2352.2.22.2.1.4			The compliance statement for SNMP entities which implement the Redback QOS MIB.
rbnQosCompliance5	1.3.6.1.4.1.2352.2.22.2.1.5			The compliance statement for SNMP entities which implement the Redback QOS MIB.
rbnQosCompliances	1.3.6.1.4.1.2352.2.22.2.1
rbnQosGroups	1.3.6.1.4.1.2352.2.22.2.2
C64 rbnQosHierarchicalPClassDroppedOctets	1.3.6.1.4.1.2352.2.22.1.7.1.3	Counter64	read-only	The number of octets that were dropped due to the hierarchical parent's policy class applied to the child circuit.
C64 rbnQosHierarchicalPClassDroppedPkts	1.3.6.1.4.1.2352.2.22.1.7.1.4	Counter64	read-only	The number of packets that dropped due to the hierarchical parent's policy class applied to the child circuit.
RBN rbnQosHierarchicalPClassId	1.3.6.1.4.1.2352.2.22.1.7.1.1	RbnQosClassId	not-accessible	The class id of the hierarchical parent policy class which is applied to the child circuit.
STR rbnQosHierarchicalPClassName	1.3.6.1.4.1.2352.2.22.1.7.1.2	SnmpAdminString	read-only	Name of the hierarchical parent policy class which is applied to the child circuit.
rbnQosHierarchicalPClassStatsEntry	1.3.6.1.4.1.2352.2.22.1.7.1		not-accessible	An entry containing the drop counters for one child circuit of hierarchical qos policy classes applied to the child.
rbnQosHierarchicalPClassStatsTable	1.3.6.1.4.1.2352.2.22.1.7		not-accessible	A table of drop counters for child circuits of hierarchical qos policy classes applied to the child.
C64 rbnQosHierarchicalPolicyDroppedOctets	1.3.6.1.4.1.2352.2.22.1.6.1.3	Counter64	read-only	The number of octets that were dropped due to the hierarchical parent's policy applied to the child circuit.
C64 rbnQosHierarchicalPolicyDroppedPkts	1.3.6.1.4.1.2352.2.22.1.6.1.4	Counter64	read-only	The number of packets that dropped due to the hierarchical parent's policy applied to the child circuit.
STR rbnQosHierarchicalPolicyName	1.3.6.1.4.1.2352.2.22.1.6.1.2	SnmpAdminString	read-only	Name of the hierarchical parent policy applied to the child circuit.
rbnQosHierarchicalPolicyStatsEntry	1.3.6.1.4.1.2352.2.22.1.6.1		not-accessible	An entry containing the drop counters for one child circuit of hierarchical qos policies applied to the child.
rbnQosHierarchicalPolicyStatsGroup	1.3.6.1.4.1.2352.2.22.2.2.6			The collection of objects which allow monitoring circuits that have hierarchical policies enabled.
rbnQosHierarchicalPolicyStatsTable	1.3.6.1.4.1.2352.2.22.1.6		not-accessible	A table of drop counters for child circuits of hierarchical qos policies applied to the child.
RBN rbnQosHierarchicalPolicyType	1.3.6.1.4.1.2352.2.22.1.6.1.1	RbnQosPolicyType	not-accessible	The type of the hierarchical parent rate-limit policy which is applied to the child circuit.
rbnQosIfGroup	1.3.6.1.4.1.2352.2.22.2.2.1			The collection of objects which allow monitoring of interfaces with QoS enabled.
C64 rbnQosIfHCInDroppedOctets	1.3.6.1.4.1.2352.2.22.1.1.1.6	Counter64	read-only	The total number of received octets that were dropped on the interface, including but not limited to octets dropped due to limiting. This object is a 64-bit version of rbnQosIfInDroppedOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfHCInOctets	1.3.6.1.4.1.2352.2.22.1.1.1.2	Counter64	read-only	The total number of post-limited octets received on the interface, including framing characters. This object is 64-bit version of rbnQosIfInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfHCOutDroppedOctets	1.3.6.1.4.1.2352.2.22.1.1.1.8	Counter64	read-only	The total number of outbound octets that were dropped on the interface, including but not limited to octets dropped due to limiting. This object is a 64-bit version of rbnQosIfOutDroppedOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfHCOutOctets	1.3.6.1.4.1.2352.2.22.1.1.1.4	Counter64	read-only	The total number of pre-limited octets transmitted out of the interface, including framing characters. This object is a 64-bit version of rbnQosIfOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfInDroppedOctets	1.3.6.1.4.1.2352.2.22.1.1.1.5	Counter32	read-only	The total number of received octets that were dropped on the interface, including but not limited to octets dropped due to limiting. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfInOctetsEx	1.3.6.1.4.1.2352.2.22.1.1.1.1	Counter32	read-only	The total number of post-limited octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfOutDroppedOctets	1.3.6.1.4.1.2352.2.22.1.1.1.7	Counter32	read-only	The total number of outbound octets that were dropped on the interface, including but not limited to octets dropped due to limiting. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfOutOctets	1.3.6.1.4.1.2352.2.22.1.1.1.3	Counter32	read-only	The total number of pre-limited octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
rbnQosIfQueueGroup	1.3.6.1.4.1.2352.2.22.2.2.2			The collection of objects which allow monitoring of transmit queues on interfaces with QoS enabled.
C64 rbnQosIfQueueHCOutOctets	1.3.6.1.4.1.2352.2.22.1.2.1.8	Counter64	read-only	The number of octets transmitted out of this queue. This object is a 64-bit version of rbnQosIfQueueOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfQueueHCOutPkts	1.3.6.1.4.1.2352.2.22.1.2.1.9	Counter64	read-only	The number of packets transmitted out of this queue. This object is a 64-bit version of rbnQosIfQueueOutPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfQueueHCTailDroppedOctets	1.3.6.1.4.1.2352.2.22.1.2.1.12	Counter64	read-only	The number of octets dropped when the total number of packets in this queue was greater than the maximum threshold. This object is a 64-bit version of rbnQosIfQueueTailDroppedOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfQueueHCTailDroppedPkts	1.3.6.1.4.1.2352.2.22.1.2.1.13	Counter64	read-only	The number of packets dropped when the total number of packets in this queue was greater than the maximum threshold. This object is a 64-bit version of rbnQosIfQueueTailDroppedPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfQueueHCWredDroppedOctets	1.3.6.1.4.1.2352.2.22.1.2.1.10	Counter64	read-only	The number of octets dropped due to the application of a weighted random early detection algorithm. This object is a 64-bit version of rbnQosIfQueueWredDroppedOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfQueueHCWredDroppedPkts	1.3.6.1.4.1.2352.2.22.1.2.1.11	Counter64	read-only	The number of packets dropped due to the application of a weighted random early detection algorithm. This object is a 64-bit version of rbnQosIfQueueWredDroppedPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
U32 rbnQosIfQueueId	1.3.6.1.4.1.2352.2.22.1.2.1.1	Unsigned32	not-accessible	A unique identifier for a transmit queue within an interface.
C32 rbnQosIfQueueOutOctets	1.3.6.1.4.1.2352.2.22.1.2.1.2	Counter32	read-only	The number of octets transmitted out of this queue. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfQueueOutPkts	1.3.6.1.4.1.2352.2.22.1.2.1.3	Counter32	read-only	The number of packets transmitted out of this queue. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfQueueTailDroppedOctets	1.3.6.1.4.1.2352.2.22.1.2.1.6	Counter32	read-only	The number of octets dropped when the total number of packets in this queue was greater than the maximum threshold. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfQueueTailDroppedPkts	1.3.6.1.4.1.2352.2.22.1.2.1.7	Counter32	read-only	The number of packets dropped when the total number of packets in this queue was greater than the maximum threshold. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfQueueWredDroppedOctets	1.3.6.1.4.1.2352.2.22.1.2.1.4	Counter32	read-only	The number of octets dropped due to the application of a weighted random early detection algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C32 rbnQosIfQueueWredDroppedPkts	1.3.6.1.4.1.2352.2.22.1.2.1.5	Counter32	read-only	The number of packets dropped due to the application of a weighted random early detection algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
C64 rbnQosIfRLClassConformDroppedOctets	1.3.6.1.4.1.2352.2.22.1.4.1.7	Counter64	read-only	The number of octets that were dropped due to the application of a conform action on packets that conform to the rate limit set on the interface for which class counters are enabled.
C64 rbnQosIfRLClassConformDroppedPkts	1.3.6.1.4.1.2352.2.22.1.4.1.8	Counter64	read-only	The number of packets that were dropped due to the application of a conform action on packets that conform to the rate limit set on the interface for which class counters are enabled.
C64 rbnQosIfRLClassConformOctets	1.3.6.1.4.1.2352.2.22.1.4.1.5	Counter64	read-only	The number of octets that conform to the rate limit set on the interface for which class counters are enabled.
C64 rbnQosIfRLClassConformPkts	1.3.6.1.4.1.2352.2.22.1.4.1.6	Counter64	read-only	The number of packets that conform to the rate limit set on the interface for which class counters are enabled.
C64 rbnQosIfRLClassExceedDroppedOctets	1.3.6.1.4.1.2352.2.22.1.4.1.11	Counter64	read-only	The number of octets that were dropped due to the application of an exceed action on packets that exceed the rate limit set on the interface for which class counters are enabled.
C64 rbnQosIfRLClassExceedDroppedPkts	1.3.6.1.4.1.2352.2.22.1.4.1.12	Counter64	read-only	The number of packets that were dropped due to the application of an exceed action on packets that exceed the rate limit set on the interface for which class counters are enabled.
C64 rbnQosIfRLClassExceedOctets	1.3.6.1.4.1.2352.2.22.1.4.1.9	Counter64	read-only	The number of octets that exceed the rate limit set on the interface for which class counters are enabled.
C64 rbnQosIfRLClassExceedPkts	1.3.6.1.4.1.2352.2.22.1.4.1.10	Counter64	read-only	The number of packets that exceed the rate limit set on the interface.
RBN rbnQosIfRLClassId	1.3.6.1.4.1.2352.2.22.1.4.1.2	RbnQosClassId	not-accessible	A value that uniquely identifies a class defined in the rate-limit policy access list.
STR rbnQosIfRLClassName	1.3.6.1.4.1.2352.2.22.1.4.1.4	SnmpAdminString	read-only	Name of the class in the rate-limit policy access list.
rbnQosIfRLClassStatsGroup	1.3.6.1.4.1.2352.2.22.2.2.4			The collection of objects which allow monitoring interfaces that have class-based policing/metering policies enabled.
C64 rbnQosIfRLClassViolateDroppedOctets	1.3.6.1.4.1.2352.2.22.1.4.1.15	Counter64	read-only	The number of octets that were dropped due to the application of a violate action on packets that violate the normal and maximum burst sizes on the interface for which class counters are enabled.
C64 rbnQosIfRLClassViolateDroppedPkts	1.3.6.1.4.1.2352.2.22.1.4.1.16	Counter64	read-only	The number of packets that were dropped due to the application of a violate action on packets that violate the normal and maximum burst sizes on the interface for which class counters are enabled.
C64 rbnQosIfRLClassViolateOctets	1.3.6.1.4.1.2352.2.22.1.4.1.13	Counter64	read-only	The number of octets that violate the normal and maximum burst sizes on the interface for which class counters are enabled.
C64 rbnQosIfRLClassViolatePkts	1.3.6.1.4.1.2352.2.22.1.4.1.14	Counter64	read-only	The number of packets that violate the normal and maximum burst sizes on the interface for which class counters are enabled.
STR rbnQosIfRLPolicyName	1.3.6.1.4.1.2352.2.22.1.4.1.3	SnmpAdminString	read-only	Name of the rate-limit policy.
RBN rbnQosIfRLPolicyType	1.3.6.1.4.1.2352.2.22.1.4.1.1	RbnQosPolicyType	not-accessible	The type of the rate-limit policy which is applied to the interface.
rbnQosInterfaceEntry	1.3.6.1.4.1.2352.2.22.1.1.1		not-accessible	A conceptual row in the rbnQosInterfaceTable.
rbnQosInterfaceQueueStatsEntry	1.3.6.1.4.1.2352.2.22.1.2.1		not-accessible	A conceptual row in the rbnQosInterfaceQueueStatsTable. Each row contains the transmitted and dropped packets/octets count for each transmit queue on an interface.
rbnQosInterfaceQueueStatsTable	1.3.6.1.4.1.2352.2.22.1.2		not-accessible	This table specifies per transmit queue statistical information. It contains the transmit queue packet/octet counts for each packet oriented IF-MIB layer for which QoS is enabled.
rbnQosInterfaceTable	1.3.6.1.4.1.2352.2.22.1.1		not-accessible	This table contains entries for every packet oriented IF-MIB layer for which QoS is enabled.
rbnQosIntfRLClassStatsEntry	1.3.6.1.4.1.2352.2.22.1.4.1		not-accessible	An entry containing statistical information before and after the class-based rate-limit action is taken on the interface.
rbnQosIntfRLClassStatsTable	1.3.6.1.4.1.2352.2.22.1.4		not-accessible	This table specifies per class statistical information. It contains the class packet/octet counts for each packet oriented IF-MIB layer to which the class-based policing/ metering policy is applied.
rbnQosMib	1.3.6.1.4.1.2352.2.22			This MIB defines statistical counters that may be used to monitor subscriber circuits and those IF-MIB layers, which support ifPacketGroup, ifHCPacketGroup or ifVHCPacketGroup, that have Quality Of Service enabled.
rbnQosMibConformance	1.3.6.1.4.1.2352.2.22.2
rbnQosMibObjects	1.3.6.1.4.1.2352.2.22.1
rbnQosSubscriberQueueGroup	1.3.6.1.4.1.2352.2.22.2.2.3			The collection of objects which allow monitoring of transmit queues on subscriber circuits with QoS queuing enabled.
rbnQosSubscriberQueueStatsEntry	1.3.6.1.4.1.2352.2.22.1.3.1		not-accessible	A conceptual row in the rbnQosSubscriberQueueStatsTable. Each row contains the transmitted and dropped packets/octets count for each transmit queue used on a subscriber circuit.
rbnQosSubscriberQueueStatsTable	1.3.6.1.4.1.2352.2.22.1.3		not-accessible	This table specifies per transmit queue statistical information. It contains the transmit queue packet/octet counts for each active subscriber session for which QoS queuing policy is enabled.
rbnQosSubscriberRLClassStatsEntry	1.3.6.1.4.1.2352.2.22.1.5.1		not-accessible	An entry containing statistical information before and after the class-based rate-limit action is taken on the subscriber session.
rbnQosSubscriberRLClassStatsGroup	1.3.6.1.4.1.2352.2.22.2.2.5			The collection of objects which allow monitoring subscriber circuits that have class-based policing/metering policies enabled.
rbnQosSubscriberRLClassStatsTable	1.3.6.1.4.1.2352.2.22.1.5		not-accessible	This table specifies per class statistical information on the subscriber circuits. It contains the class packet/octet counts for each active subscriber session to which the class-based policing/metering policy is applied when the counters are enabled for the class. All MIB objects defined in the table are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
C64 rbnQosSubsQueueHCOutOctets	1.3.6.1.4.1.2352.2.22.1.3.1.9	Counter64	read-only	The number of octets transmitted out of this queue. This object is a 64-bit version of rbnQosSubsQueueOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C64 rbnQosSubsQueueHCOutPkts	1.3.6.1.4.1.2352.2.22.1.3.1.10	Counter64	read-only	The number of packets transmitted out of this queue. This object is a 64-bit version of rbnQosSubsQueueOutPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C64 rbnQosSubsQueueHCTailDroppedOctets	1.3.6.1.4.1.2352.2.22.1.3.1.13	Counter64	read-only	The number of octets dropped when the total number of packets in this queue was greater than the maximum threshold. This object is a 64-bit version of rbnQosSubsQueueTailDroppedOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C64 rbnQosSubsQueueHCTailDroppedPkts	1.3.6.1.4.1.2352.2.22.1.3.1.14	Counter64	read-only	The number of packets dropped when the total number of packets in this queue was greater than the maximum threshold. This object is a 64-bit version of rbnQosSubsQueueTailDroppedPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C64 rbnQosSubsQueueHCWredDroppedOctets	1.3.6.1.4.1.2352.2.22.1.3.1.11	Counter64	read-only	The number of octets dropped due to the application of a weighted random early detection algorithm. This object is a 64-bit version of rbnQosSubsQueueWredDroppedOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C64 rbnQosSubsQueueHCWredDroppedPkts	1.3.6.1.4.1.2352.2.22.1.3.1.12	Counter64	read-only	The number of packets dropped due to the application of a weighted random early detection algorithm. This object is a 64-bit version of rbnQosSubsQueueWredDroppedPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system.
U32 rbnQosSubsQueueId	1.3.6.1.4.1.2352.2.22.1.3.1.1	Unsigned32	not-accessible	A unique identifier for a transmit queue used by the circuit.
C32 rbnQosSubsQueueOutOctets	1.3.6.1.4.1.2352.2.22.1.3.1.3	Counter32	read-only	The number of octets transmitted out of this queue. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C32 rbnQosSubsQueueOutPkts	1.3.6.1.4.1.2352.2.22.1.3.1.4	Counter32	read-only	The number of packets transmitted out of this queue. Discontinuities in the value of this counter can occur at re-initialization of the management system.
STR rbnQosSubsQueuePolicyName	1.3.6.1.4.1.2352.2.22.1.3.1.2	SnmpAdminString	read-only	The name of the queuing policy the subscriber circuit is using.
C32 rbnQosSubsQueueTailDroppedOctets	1.3.6.1.4.1.2352.2.22.1.3.1.7	Counter32	read-only	The number of octets dropped when the total number of packets in this queue was greater than the maximum threshold. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C32 rbnQosSubsQueueTailDroppedPkts	1.3.6.1.4.1.2352.2.22.1.3.1.8	Counter32	read-only	The number of packets dropped when the total number of packets in this queue was greater than the maximum threshold. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C32 rbnQosSubsQueueWredDroppedOctets	1.3.6.1.4.1.2352.2.22.1.3.1.5	Counter32	read-only	The number of octets dropped due to the application of a weighted random early detection algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C32 rbnQosSubsQueueWredDroppedPkts	1.3.6.1.4.1.2352.2.22.1.3.1.6	Counter32	read-only	The number of packets dropped due to the application of a weighted random early detection algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system.
C64 rbnQosSubsRLClassConformDroppedOctets	1.3.6.1.4.1.2352.2.22.1.5.1.7	Counter64	read-only	The number of octets that were dropped due to the application of a conform action on packets that conform to the rate limit set on the subscriber circuit.
C64 rbnQosSubsRLClassConformDroppedPkts	1.3.6.1.4.1.2352.2.22.1.5.1.8	Counter64	read-only	The number of packets that were dropped due to the application of a conform action on packets that conform to the rate limit set on the subscriber circuit.
C64 rbnQosSubsRLClassConformOctets	1.3.6.1.4.1.2352.2.22.1.5.1.5	Counter64	read-only	The number of octets that conform to the rate limit set on the subscriber circuit.
C64 rbnQosSubsRLClassConformPkts	1.3.6.1.4.1.2352.2.22.1.5.1.6	Counter64	read-only	The number of packets that conform to the rate limit set on the subscriber circuit.
C64 rbnQosSubsRLClassExceedDroppedOctets	1.3.6.1.4.1.2352.2.22.1.5.1.11	Counter64	read-only	The number of octets that were dropped due to the application of an exceed action on packets that exceed the rate limit set on the subscriber circuit.
C64 rbnQosSubsRLClassExceedDroppedPkts	1.3.6.1.4.1.2352.2.22.1.5.1.12	Counter64	read-only	The number of packets that were dropped due to the application of an exceed action on packets that exceed the rate limit set on the subscriber circuit.
C64 rbnQosSubsRLClassExceedOctets	1.3.6.1.4.1.2352.2.22.1.5.1.9	Counter64	read-only	The number of octets that exceed the rate limit set on the subscriber circuit.
C64 rbnQosSubsRLClassExceedPkts	1.3.6.1.4.1.2352.2.22.1.5.1.10	Counter64	read-only	The number of packets that exceed the rate limit set on the subscriber circuit.
RBN rbnQosSubsRLClassId	1.3.6.1.4.1.2352.2.22.1.5.1.2	RbnQosClassId	not-accessible	A value that uniquely identifies a class defined in the rate-limit policy access list.
STR rbnQosSubsRLClassName	1.3.6.1.4.1.2352.2.22.1.5.1.4	SnmpAdminString	read-only	Name of the class in the rate-limit policy access list.
C64 rbnQosSubsRLClassViolateDroppedOctets	1.3.6.1.4.1.2352.2.22.1.5.1.15	Counter64	read-only	The number of octets that were dropped due to the application of a violate action on packets that violate the normal and maximum burst sizes on the subscriber circuit.
C64 rbnQosSubsRLClassViolateDroppedPkts	1.3.6.1.4.1.2352.2.22.1.5.1.16	Counter64	read-only	The number of packets that were dropped due to the application of a violate action on packets that violate the normal and maximum burst sizes on the subscriber circuit.
C64 rbnQosSubsRLClassViolateOctets	1.3.6.1.4.1.2352.2.22.1.5.1.13	Counter64	read-only	The number of octets that violate the normal and maximum burst sizes on the subscriber circuit.
C64 rbnQosSubsRLClassViolatePkts	1.3.6.1.4.1.2352.2.22.1.5.1.14	Counter64	read-only	The number of packets that violate the normal and maximum burst sizes on the subscriber circuit.
STR rbnQosSubsRLPolicyName	1.3.6.1.4.1.2352.2.22.1.5.1.3	SnmpAdminString	read-only	Name of the rate-limit policy.
RBN rbnQosSubsRLPolicyType	1.3.6.1.4.1.2352.2.22.1.5.1.1	RbnQosPolicyType	not-accessible	The type of the rate-limit policy which is applied to the circuit.

RFC description

Monitors Quality of Service statistics including hierarchical policies and metering on subscriber circuits and interfaces.

Start monitoring Ericsson/Redback SmartEdge BRAS router (QoS-enabled subscriber circuit traffic/drop statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RBN-QOS-MIB