RBN-SUBSCRIBER-ACTIVE-MIB

All MIBs › RBN-SUBSCRIBER-ACTIVE-MIB

Organization: Redback Networks, Inc.

Last Updated: 2013-02-27

Category: Domain: Subscriber Management, Vendor: Ericsson

Description: Monitors active subscriber session counts, states, and per-context statistics on Redback SmartEdge BRAS platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RBN-SUBSCRIBER-ACTIVE-MIB?

RBN-SUBSCRIBER-ACTIVE-MIB is an Ericsson (Redback Networks) proprietary MIB tracking currently active subscriber sessions on Redback broadband-access platforms, scoped per SNMP context/community. Its active-subscriber table records each session's name, session ID, circuit description/handle, start time, NAS port type, and medium type, with a clear/resend action for forcing re-accounting, alongside companion tables mapping subscriber sessions to their assigned IP addresses. As a hardware/software-status MIB it lets an administrator look up which IP address(es) a given subscriber session currently holds and how long it has been active. It is deployed on Ericsson (Redback Networks) broadband subscriber-management platforms. Engineers can download the RBN-SUBSCRIBER-ACTIVE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RBN-SUBSCRIBER-ACTIVE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson (Redback Networks) broadband subscriber-management platforms

Monitoring Examples

A support engineer looks up a subscriber's rbnSubsActiveIpAddr by session name to confirm which IP address was assigned to their active session when investigating a reported connectivity complaint.

What Can Be Monitored

active subscriber sessions and assigned IP addresses

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From RBN-SMI

rbnMgmt

OBJECT-IDENTITY

From RBN-TC

RbnCircuitHandle
RbnPercentage
RbnPortMediumType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMP-VIEW-BASED-ACM-MIB

vacmContextName

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
zeroDotZero

From SNMPv2-TC

DateAndTime
RowPointer
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using rbnSubsOctetsSent OID:

Select an Ericsson (Redback Networks) broadband subscriber-management platform (active subscriber session tracking) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rbnSubsOctetsSent into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of octets sent by the circuit. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in octets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rbnSubsActive	1.3.6.1.4.1.2352.2.27.1.1
IP rbnSubsActiveAddr	1.3.6.1.4.1.2352.2.27.1.1.2.1.2	InetAddress	read-only	The host IP address of the active subscriber.
IPt rbnSubsActiveAddrType	1.3.6.1.4.1.2352.2.27.1.1.2.1.1	InetAddressType	not-accessible	The address type of rbnSubsActiveAddr.
STR rbnSubsActiveCircuitDescr	1.3.6.1.4.1.2352.2.27.1.1.1.1.3	SnmpAdminString	read-only	A string which provides identifying information (e.g slot/port) of the circuit the subscriber is using.
RBN rbnSubsActiveCircuitHandle	1.3.6.1.4.1.2352.2.27.1.1.1.1.4	RbnCircuitHandle	read-only	A value for identifying circuits.
T/F rbnSubsActiveClear	1.3.6.1.4.1.2352.2.27.1.1.1.1.6	TruthValue	read-write	Setting this value to 'true' will clear the active subscriber session. In the case of PPP, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 encapsulated circuits the session is brought down and then back up and an attempt is made to re-authenticate the subscriber. An SNMP get operation always returns 'false'
rbnSubsActiveConformance	1.3.6.1.4.1.2352.2.27.2
rbnSubsActiveEntry	1.3.6.1.4.1.2352.2.27.1.1.1.1		not-accessible	A conceptual row in the rbnSubsActiveTable.
rbnSubsActiveGroup	1.3.6.1.4.1.2352.2.27.2.2.1			The collection of objects which represent an active subscriber. This group is replaced by rbnSubsActiveGroup2.
rbnSubsActiveGroup2	1.3.6.1.4.1.2352.2.27.2.2.3			The collection of objects which represent an active subscriber.
rbnSubsActiveGroup3	1.3.6.1.4.1.2352.2.27.2.2.5			The collection of objects which represent an active subscriber. This collection includes the objects rbnSubsActiveNasPortType and rbnSubsActiveMediumType.
rbnSubsActiveGroup4	1.3.6.1.4.1.2352.2.27.2.2.10			The collection of objects which represent an active subscriber. This collection includes the objects rbnSubsActiveNasPortType and rbnSubsActiveMediumType.
IP rbnSubsActiveIpAddr	1.3.6.1.4.1.2352.2.27.1.1.7.1.2	InetAddress	read-only	The address prefix. The address type of this object is specified in rbnSubsActiveIpAddrType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after rbnSubsActiveIpPfxLen must be zero.
STR rbnSubsActiveIpAddrDescr	1.3.6.1.4.1.2352.2.27.1.1.7.1.4	SnmpAdminString	read-only	Human readable textual format of IP address.
rbnSubsActiveIpAddrEntry	1.3.6.1.4.1.2352.2.27.1.1.7.1		not-accessible	A conceptual row in the rbnSubsActiveIpAddrTable.
rbnSubsActiveIpAddrTable	1.3.6.1.4.1.2352.2.27.1.1.7		not-accessible	This table contains IPv4/IPv6 addresses used by active subscriber sessions.
IPt rbnSubsActiveIpAddrType	1.3.6.1.4.1.2352.2.27.1.1.7.1.1	InetAddressType	read-only	The address type of rbnSubsActiveIpAddr.
rbnSubsActiveIpEntry	1.3.6.1.4.1.2352.2.27.1.1.2.1		not-accessible	A conceptual row in the rbnSubsActiveIpTable.
ADR rbnSubsActiveIpPfxLen	1.3.6.1.4.1.2352.2.27.1.1.7.1.3	InetAddressPrefixLength	read-only	The prefix length associated with this prefix. For IPv4 active subscriber session, the prefix length is always 32.
rbnSubsActiveIpTable	1.3.6.1.4.1.2352.2.27.1.1.2		not-accessible	This table contains IP addresses used by active subscribers.
RBN rbnSubsActiveMediumType	1.3.6.1.4.1.2352.2.27.1.1.1.1.9	RbnPortMediumType	read-only	The medium type of the NAS-Port.
STR rbnSubsActiveName	1.3.6.1.4.1.2352.2.27.1.1.1.1.1	SnmpAdminString	not-accessible	The name identifying this entry. An entry configured by other means may have been given a name whose length is greater than 80. Names which exceed this length are not accessible via SNMP operations.
U32 rbnSubsActiveNasPortType	1.3.6.1.4.1.2352.2.27.1.1.1.1.8	Unsigned32	read-only	The RADIUS attribute NAS-Port-Type which indicates the type of the physical port which is authenticating the user.
rbnSubsActiveNotifications	1.3.6.1.4.1.2352.2.27.3
rbnSubsActiveObjects	1.3.6.1.4.1.2352.2.27.1
T/F rbnSubsActiveResend	1.3.6.1.4.1.2352.2.27.1.1.1.1.7	TruthValue	read-write	Setting this value to 'true' will cause a resend of the Radius acct-start packet. An SNMP get operation always returns 'false'
T/F rbnSubsActiveResendSvcAcct	1.3.6.1.4.1.2352.2.27.1.1.1.1.10	TruthValue	read-write	Setting this value to 'true' will cause a resend of the Radius acct-start packet for all services associated with the active subscriber session. An SNMP get operation always returns 'false'
rbnSubsActiveSessionEntry	1.3.6.1.4.1.2352.2.27.1.1.6.1		not-accessible	A conceptual row in the rbnSubsActiveSessionTable.
STR rbnSubsActiveSessionId	1.3.6.1.4.1.2352.2.27.1.1.1.1.2	SnmpAdminString	not-accessible	A value that uniquely identifies an active subscriber session. If RADIUS is being used to configure/authenticate subscribers, this value will appear in the RADIUS Acct-Session-Id attribute.
NUM rbnSubsActiveSessionPointer	1.3.6.1.4.1.2352.2.27.1.1.6.1.2	RowPointer	read-only	A pointer to the row in rbnSubsActiveTable to which this session belongs. May be {0 0} if there is no such row.
G32 rbnSubsActiveSessions	1.3.6.1.4.1.2352.2.27.1.2.5.3	Gauge32	read-only	The number of active subscriber sessions on the SmartEdge router.
STR rbnSubsActiveSessionSubscriberName	1.3.6.1.4.1.2352.2.27.1.1.6.1.1	SnmpAdminString	read-only	The subscriber name associated with this session.
rbnSubsActiveSessionTable	1.3.6.1.4.1.2352.2.27.1.1.6		not-accessible	This table contains active subscriber sessions which have been authenticated on an circuit.
DAT rbnSubsActiveStartTime	1.3.6.1.4.1.2352.2.27.1.1.1.1.5	DateAndTime	read-only	The time when the subscriber became active.
rbnSubsActiveTable	1.3.6.1.4.1.2352.2.27.1.1.1		not-accessible	This table contains subscriber sessions which have been authenticated on an circuit.
STR rbnSubsBounceName	1.3.6.1.4.1.2352.2.27.1.1.3.3	SnmpAdminString	read-write	Each circuit using CLIPS encapsulation used by the named subscriber is brought down and immediately recreated using the RADIUS Access- Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.
STR rbnSubsBounceSessionId	1.3.6.1.4.1.2352.2.27.1.1.3.4	SnmpAdminString	read-write	The circuit using CLIPS encapsulation identified by the RADIUS Acct-Session-Id is brought down and immediately recreated using the RADIUS Access-Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.
RBN rbnSubsCapacityPercentageUsed	1.3.6.1.4.1.2352.2.27.1.2.5.4	RbnPercentage	read-only	The percentage of licensed subscriber sessions in use on the SmartEdge router. This value is computed as: if rbnSubsLicensedSessions equals 0 then if rbnSubsActiveSessions equals 0 then 0 else 100 else MIN((rbnSubsActiveSessions * 100)/rbnSubsLicensedSessions), 100).
rbnSubsClear	1.3.6.1.4.1.2352.2.27.1.1.3
U32 rbnSubsClearReason	1.3.6.1.4.1.2352.2.27.1.1.3.9	Unsigned32	read-write	An unsigned integer value which may be included in the set request for rbnSubsClearSubscriberName, rbnSubsClearSessionId, rbnSubsBounceName, rbnSubsBounceSessionId, or any other objects define under the rbnSubsClear OID node. The use of this object value is implementation dependent. This object returns 0 when queried.
STR rbnSubsClearSessionId	1.3.6.1.4.1.2352.2.27.1.1.3.2	SnmpAdminString	read-write	A set of this object will clear the subscriber session identified by this value. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.
STR rbnSubsClearSubscriberName	1.3.6.1.4.1.2352.2.27.1.1.3.1	SnmpAdminString	read-write	Setting this object to the subscriber name will clear all the sessions associated with the subscriber. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.
G32 rbnSubsCntxtCount	1.3.6.1.4.1.2352.2.27.1.2.1.1.1	Gauge32	read-only	The count of active subscribers with either IPv4 or IPv6 or both stack UP.
rbnSubsCntxtCountEntry	1.3.6.1.4.1.2352.2.27.1.2.1.1		not-accessible	The conceptual row containing the count of active subscribers for each context.
rbnSubsCntxtCountTable	1.3.6.1.4.1.2352.2.27.1.2.1		not-accessible	This table contains counts of active subscribers by context name. Unlike any of the other tables in this mib module, all rows in this table are accessible when the context 'local' is specified in the snmp message, unless restricted by entries in the vacmAccessTable. Snmp requests using other contexts shall return only the row which matches the context.
G32 rbnSubsCntxtDualCount	1.3.6.1.4.1.2352.2.27.1.2.1.1.4	Gauge32	read-only	The count of active subscribers which are authorized for both IPv4 and IPv6 for the context. At any time either one or both stacks may be UP.
G32 rbnSubsCntxtIp4OnlyCount	1.3.6.1.4.1.2352.2.27.1.2.1.1.2	Gauge32	read-only	The count of IPv4 active subscribers which are authorized for only IPv4 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.
G32 rbnSubsCntxtIp6OnlyCount	1.3.6.1.4.1.2352.2.27.1.2.1.1.3	Gauge32	read-only	The count of IPv6 active subscribers which are authorized for only IPv6 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.
G32 rbnSubsCntxtLacCount	1.3.6.1.4.1.2352.2.27.1.2.1.1.5	Gauge32	read-only	The count of active LAC subscribers.
rbnSubsCompliance	1.3.6.1.4.1.2352.2.27.2.1.1			The compliance statement for SNMP entities which implement the Redback Subscriber MIB. This compliance is replaced by rbnSubsCompliance2
rbnSubsCompliance2	1.3.6.1.4.1.2352.2.27.2.1.2			The compliance statement for SNMP entities which implement the Redback Subscriber MIB. This compliance is replaced by rbnSubsCompliance3
rbnSubsCompliance3	1.3.6.1.4.1.2352.2.27.2.1.3			The compliance statement for SNMP entities which implement the Redback Subscriber MIB. This compliance is replaced by rbnSubsCompliance4.
rbnSubsCompliance4	1.3.6.1.4.1.2352.2.27.2.1.4			The compliance statement for SNMP entities which implement the Redback Subscriber MIB.
rbnSubsCompliance5	1.3.6.1.4.1.2352.2.27.2.1.5			The compliance statement for SNMP entities which implement the Redback Subscriber MIB.
rbnSubsCompliance6	1.3.6.1.4.1.2352.2.27.2.1.6			The compliance statement for SNMP entities which implement the Redback Subscriber MIB.
rbnSubsCompliances	1.3.6.1.4.1.2352.2.27.2.1
NTF rbnSubsConfigErrorEvent	1.3.6.1.4.1.2352.2.27.3.0.1			This notification signifies that the subscriber session received one or more attribute(s) referring non-existing configuration, and the subscriber session is allowed to stay up.
STR rbnSubsConfigErrorMsgs	1.3.6.1.4.1.2352.2.27.1.3.2	SnmpAdminString	accessible-for-notify	Detailed error messages that describes the mis-configured attributes that failed authentication.
rbnSubscriberActiveMib	1.3.6.1.4.1.2352.2.27			Defines the objects necessary to support the management of active subscribers in Redback product family. All mib objects, except rbnSubsCntxtCountTable, defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
G32 rbnSubsEncapsCount	1.3.6.1.4.1.2352.2.27.1.2.2.1.2	Gauge32	read-only	The count of active subscribers for the encapsulation type.
rbnSubsEncapsCountEntry	1.3.6.1.4.1.2352.2.27.1.2.2.1		not-accessible	A conceptual row in the rbnSubsEncapsCountTable.
rbnSubsEncapsCountTable	1.3.6.1.4.1.2352.2.27.1.2.2		not-accessible	This table contains counts of active subscribers by encapsulation type.
INT rbnSubsEncapsulationType	1.3.6.1.4.1.2352.2.27.1.2.2.1.1	INTEGER	not-accessible	This object identifies the type of encapsulation the subscriber is using. Note that 'ppp' includes all types of supported ppp, excluding pppoe.
rbnSubsGroups	1.3.6.1.4.1.2352.2.27.2.2
C64 rbnSubsIPv4McastOctetsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.20	Counter64	read-only	The number of IPv4 multicast octets received by the circuit.
C64 rbnSubsIPv4McastOctetsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.19	Counter64	read-only	The number of IPv4 multicast octets sent by the circuit.
C64 rbnSubsIPv4McastPktsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.24	Counter64	read-only	The number of IPv4 multicast packets received by the circuit.
C64 rbnSubsIPv4McastPktsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.23	Counter64	read-only	The number of IPv4 multicast packets sent by the circuit.
C64 rbnSubsIPv4OctetsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.12	Counter64	read-only	The number of IPv4 octets received by the circuit. This counter includes multicast activity.
C64 rbnSubsIPv4OctetsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.11	Counter64	read-only	The number of IPv4 octets sent by the circuit. This counter includes multicast activity.
C64 rbnSubsIPv4PktsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.16	Counter64	read-only	The number of IPv4 packets received by the circuit. This counter includes multicast activity.
C64 rbnSubsIPv4PktsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.15	Counter64	read-only	The number of IPv4 packets sent by the circuit. This counter includes multicast activity.
C64 rbnSubsIPv6McastOctetsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.22	Counter64	read-only	The number of IPv6 multicast octets received by the circuit.
C64 rbnSubsIPv6McastOctetsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.21	Counter64	read-only	The number of IPv6 multicast octets sent by the circuit.
C64 rbnSubsIPv6McastPktsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.26	Counter64	read-only	The number of IPv6 multicast packets received by the circuit.
C64 rbnSubsIPv6McastPktsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.25	Counter64	read-only	The number of IPv6 multicast packets sent by the circuit.
C64 rbnSubsIPv6OctetsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.14	Counter64	read-only	The number of IPv6 octets received by the circuit. This counter includes multicast activity.
C64 rbnSubsIPv6OctetsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.13	Counter64	read-only	The number of IPv6 octets sent by the circuit. This counter includes multicast activity.
C64 rbnSubsIPv6PktsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.18	Counter64	read-only	The number of IPv6 packets received by the circuit. This counter includes multicast activity.
C64 rbnSubsIPv6PktsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.17	Counter64	read-only	The number of IPv6 packets sent by the circuit. This counter includes multicast activity.
rbnSubsLicense	1.3.6.1.4.1.2352.2.27.1.2.5
G32 rbnSubsLicensedSessions	1.3.6.1.4.1.2352.2.27.1.2.5.2	Gauge32	read-only	The number of licensed subscriber sessions on the SmartEdge router.
rbnSubsLicenseGroup	1.3.6.1.4.1.2352.2.27.2.2.9			The collection of objects related to subscriber licenses.
G32 rbnSubsMaxSupportedSessions	1.3.6.1.4.1.2352.2.27.1.2.5.1	Gauge32	read-only	The maximum number of active subscriber sessions that are supported on the SmartEdge router.
C64 rbnSubsMcastOctetsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.8	Counter64	read-only	The number of multicast octets received by the circuit.
C64 rbnSubsMcastOctetsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.7	Counter64	read-only	The number of multicast octets sent by the circuit.
C64 rbnSubsMcastPktsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.10	Counter64	read-only	The number of multicast packets received by the circuit.
C64 rbnSubsMcastPktsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.9	Counter64	read-only	The number of multicast packets sent by the circuit.
rbnSubsNotify	1.3.6.1.4.1.2352.2.27.1.3
T/F rbnSubsNotifyEnable	1.3.6.1.4.1.2352.2.27.1.3.1	TruthValue	read-write	This object will provide a mechanism for enabling and disabling subscriber notifications. A value of 1 (true) indicates that subscriber notifications are enabled. A value of 2 (false) indicates that subscriber notifications are disabled.
rbnSubsNotifyGroup	1.3.6.1.4.1.2352.2.27.2.2.8			Notification for tracking the failed attributes of subscriber active sessions.
rbnSubsNotifyObjectGroup	1.3.6.1.4.1.2352.2.27.2.2.7			The collection of objects related to subscriber notifications.
rbnSubsNotifyPrefix	1.3.6.1.4.1.2352.2.27.3.0
C64 rbnSubsOctetsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.2	Counter64	read-only	The number of octets received by the circuit. This counter includes multicast activity.
C64 rbnSubsOctetsSentEx	1.3.6.1.4.1.2352.2.27.1.2.3.1.1	Counter64	read-only	The number of octets sent by the circuit. This counter includes multicast activity.
C64 rbnSubsPktsReceived	1.3.6.1.4.1.2352.2.27.1.2.3.1.4	Counter64	read-only	The number of packets received by the circuit. This counter includes multicast activity.
C64 rbnSubsPktsSent	1.3.6.1.4.1.2352.2.27.1.2.3.1.3	Counter64	read-only	The number of packets sent by the circuit. This counter includes multicast activity.
G32 rbnSubsProfileCount	1.3.6.1.4.1.2352.2.27.1.2.4.1.2	Gauge32	read-only	The count of active subscribers for the profile name.
rbnSubsProfileCountEntry	1.3.6.1.4.1.2352.2.27.1.2.4.1		not-accessible	A conceptual row in the rbnSubsProfileCountTable.
rbnSubsProfileCountTable	1.3.6.1.4.1.2352.2.27.1.2.4		not-accessible	This table contains counts of active subscribers by encapsulation type.
STR rbnSubsProfileName	1.3.6.1.4.1.2352.2.27.1.2.4.1.1	SnmpAdminString	not-accessible	The profile name which applies to a set of subscribers.
STR rbnSubsReauthName	1.3.6.1.4.1.2352.2.27.1.1.3.7	SnmpAdminString	read-write	Used to reauthorize all of the active sessions associated with the given subscriber in the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.
OCT rbnSubsReauthRadiusID	1.3.6.1.4.1.2352.2.27.1.1.3.6	OCTET STRING	read-write	An octet string identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. This object returns a zero-length string when queried.
U32 rbnSubsReauthRadiusIndex	1.3.6.1.4.1.2352.2.27.1.1.3.5	Unsigned32	read-write	An unsigned integer identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. An get of this attribute returns 0.
STR rbnSubsReauthSessionId	1.3.6.1.4.1.2352.2.27.1.1.3.8	SnmpAdminString	read-write	Used to reauthorize the active session identified by the value of this object and the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.
TIM rbnSubsServiceActiveTime	1.3.6.1.4.1.2352.2.27.1.1.4.1.3	TimeStamp	read-only	The value of sysUpTime when the service became active for this subscriber. If sysUpTime is reset to zero as a result of a reinitialization of the network management (sub)system, then the values of all TimeStamp objects are also reset.
I32 rbnSubsServiceIndex	1.3.6.1.4.1.2352.2.27.1.1.5.1.1	Integer32	not-accessible	A unique index assigned to the entry.
C64 rbnSubsServiceIPv4VolumeOctetsIn	1.3.6.1.4.1.2352.2.27.1.1.4.1.8	Counter64	read-only	The subscriber session volume IPv4 octets in count.
C64 rbnSubsServiceIPv4VolumeOctetsOut	1.3.6.1.4.1.2352.2.27.1.1.4.1.9	Counter64	read-only	The subscriber session volume IPv4 octets out count.
C64 rbnSubsServiceIPv4VolumePktsIn	1.3.6.1.4.1.2352.2.27.1.1.4.1.12	Counter64	read-only	The subscriber session volume IPv4 packet in count.
C64 rbnSubsServiceIPv4VolumePktsOut	1.3.6.1.4.1.2352.2.27.1.1.4.1.13	Counter64	read-only	The subscriber session volume IPv4 packet out count.
C64 rbnSubsServiceIPv6VolumeOctetsIn	1.3.6.1.4.1.2352.2.27.1.1.4.1.10	Counter64	read-only	The subscriber session volume IPv6 octets in count.
C64 rbnSubsServiceIPv6VolumeOctetsOut	1.3.6.1.4.1.2352.2.27.1.1.4.1.11	Counter64	read-only	The subscriber session volume IPv6 octets out count.
C64 rbnSubsServiceIPv6VolumePktsIn	1.3.6.1.4.1.2352.2.27.1.1.4.1.14	Counter64	read-only	The subscriber session volume IPv6 packet in count.
C64 rbnSubsServiceIPv6VolumePktsOut	1.3.6.1.4.1.2352.2.27.1.1.4.1.15	Counter64	read-only	The subscriber session volume IPv6 packet out count.
STR rbnSubsServiceName	1.3.6.1.4.1.2352.2.27.1.1.5.1.2	SnmpAdminString	read-only	The name identifying the service.
rbnSubsServicesEntry	1.3.6.1.4.1.2352.2.27.1.1.5.1		not-accessible	A conceptual row in the rbnSubsServicesTable.
rbnSubsServicesGroup	1.3.6.1.4.1.2352.2.27.2.2.6			The collection of objects which represent Service Volume attributes.
rbnSubsServicesTable	1.3.6.1.4.1.2352.2.27.1.1.5		not-accessible	This table contains services available to subscribers.
STR rbnSubsServiceTag	1.3.6.1.4.1.2352.2.27.1.1.5.1.3	SnmpAdminString	read-only	A tag associated with the service name which may provide additional qualification to the name.
rbnSubsServiceVolumeEntry	1.3.6.1.4.1.2352.2.27.1.1.4.1		not-accessible	A conceptual row in the RbnSubsServiceVolumeTable. Each row contains the service volume limit and volume octet count for each active service session.
U32 rbnSubsServiceVolumeLimitIn	1.3.6.1.4.1.2352.2.27.1.1.4.1.1	Unsigned32	read-write	The volume limit in kilobytes (KB) allowed for the subscriber service to input (or receive) for this subscriber. If the value is 0, then there is no limit.
U32 rbnSubsServiceVolumeLimitOut	1.3.6.1.4.1.2352.2.27.1.1.4.1.2	Unsigned32	read-write	The volume limit in kilobytes (KB) allowed for the subscriber service to output (or transmit) for this subscriber. If the value is 0, then there is no limit.
C64 rbnSubsServiceVolumeOctetsIn	1.3.6.1.4.1.2352.2.27.1.1.4.1.4	Counter64	read-only	The subscriber session volume octets in count.
C64 rbnSubsServiceVolumeOctetsOut	1.3.6.1.4.1.2352.2.27.1.1.4.1.5	Counter64	read-only	The subscriber session volume octets out count.
C64 rbnSubsServiceVolumePktsIn	1.3.6.1.4.1.2352.2.27.1.1.4.1.6	Counter64	read-only	The subscriber session volume packet in count.
C64 rbnSubsServiceVolumePktsOut	1.3.6.1.4.1.2352.2.27.1.1.4.1.7	Counter64	read-only	The subscriber session volume packet out count.
rbnSubsServiceVolumeTable	1.3.6.1.4.1.2352.2.27.1.1.4		not-accessible	This table specifies service volume information on the subscriber circuits. It contains the volume octet counts for each active subscriber session for which the service is active. All MIB objects defined in the table are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
rbnSubsStats	1.3.6.1.4.1.2352.2.27.1.2
rbnSubsStatsEntry	1.3.6.1.4.1.2352.2.27.1.2.3.1		not-accessible	A conceptual row in the rbnSubsStatsTable.
rbnSubsStatsGroup	1.3.6.1.4.1.2352.2.27.2.2.2			The collection of objects which are generic counters of subscriber activity. This group is replaced by rbnSubsStatsGroup2
rbnSubsStatsGroup2	1.3.6.1.4.1.2352.2.27.2.2.4			The collection of objects which are generic counters of subscriber activity.
rbnSubsStatsGroup3	1.3.6.1.4.1.2352.2.27.2.2.11			The collection of objects which are generic counters of subscriber activity.
rbnSubsStatsTable	1.3.6.1.4.1.2352.2.27.1.2.3		not-accessible	This table contains counters for individual circuits.
C32 rbnSubsXmitOctetsDropped	1.3.6.1.4.1.2352.2.27.1.2.3.1.5	Counter32	read-only	The number of octets dropped by the circuit before transmission.
C32 rbnSubsXmitPktsDropped	1.3.6.1.4.1.2352.2.27.1.2.3.1.6	Counter32	read-only	The number of packets dropped by the circuit before transmission.

RFC description

SNMP MIB for Redback Networks Subscriber Management System (SMS) enabling monitoring of active subscriber information including encapsulation types, connection details, and subscriber statistics.

Start monitoring Ericsson (Redback Networks) broadband subscriber-management platform (active subscriber session tracking) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RBN-SUBSCRIBER-ACTIVE-MIB