| OID symbolic | OID numeric | Type | Access | Description |
|---|
| powerEthernetMIB | 1.3.6.1.2.1.10.7.20 | | | The MIB module for for managing Powered Devices (PD) or
Power Source Equipment (PSE) working according to the IEEE
802.af Powere Ethernet (DTE Power via MDI) standard. |
| pethObjects | 1.3.6.1.2.1.10.7.20.1 | | | |
| pethPsePortTable | 1.3.6.1.2.1.10.7.20.1.1 | | not-accessible | A table of objects that display and control the power
characteristics power Ethernet ports on a Power Source
Entity (PSE) device. This group will be implemented in
managed power Ethernet switches and mid-span devices. |
| pethPsePortEntry | 1.3.6.1.2.1.10.7.20.1.1.1 | | not-accessible | A set of objects that display and control the power
characteristics of a power Ethernet PSE port. |
| INT pethPsePortGroupIndex | 1.3.6.1.2.1.10.7.20.1.1.1.1 | INTEGER | not-accessible | This variable uniquely identifies the group
containing the port to which power Ethernet PSE is connected.
Group means a box in the stack, or a module in a rack.
For non-modular devices the value 1 is recommended. |
| INT pethPsePortIndex | 1.3.6.1.2.1.10.7.20.1.1.1.2 | INTEGER | not-accessible | This variable uniquely identifies the power Ethernet PSE
port within group pethPseGroupIndex to which the
power Ethernet PSE entry is connected. |
| INT pethPsePortPowerEnable | 1.3.6.1.2.1.10.7.20.1.1.1.3 | INTEGER | read-write | Enables power supply on this port.
Setting this object at a value auto(1) enables power
and detection mechanism for this port.
Setting this object at a value off(2) disables power
and detection mechanism for this port. |
| T/F pethPsePortPowerIdPairsControl | 1.3.6.1.2.1.10.7.20.1.1.1.4 | TruthValue | read-only | Describes the capability of controlling the power
pairs functionality to switch pins for sourcing power. |
| INT pethPsePortPowerIdPairs | 1.3.6.1.2.1.10.7.20.1.1.1.5 | INTEGER | read-write | Describes or controls the pairs in use. If the value of
pethPsePortPowerIdpairsControl is true, thisobject is
writable.
A value of signal(1) menas that the signal pairs
only are in use.
A value of spare(2) means that the spare pairs
only are in use.
A value of both(3) means that both the signal
and the spare pairs are in use. |
| INT pethPsePortPowerDetectionStatus | 1.3.6.1.2.1.10.7.20.1.1.1.6 | INTEGER | read-write | Controls the power detection mechanism of the port.
Setting the value auto(1) enables the power detection
mechanism of the port.
Setting the value off(2) disables the power detection
mechanism of the port.
Setting the value test(3) puts the port in a
test mode forcing continuous discovery without applying
power regardless of whether PD detected. |
| INT pethPsePortDetectionOperStatus | 1.3.6.1.2.1.10.7.20.1.1.1.7 | INTEGER | read-only | Describes the operational status of the port detection.
A value of deliveringPower(1) indicates that the port
executed the detection algorithm, found a PD connection
and is currently delivering power.
A value of off(2) indicates that the port did not find
a PD connection and is not in serching mode.
A value of searching(3) indicates that the detection
algorithm is in work, and did not detect a valid PD. No
power is currently provided.
A value of fault(4) indicates that a fault was detected
on the port . |
| INT pethPsePortPowerPriority | 1.3.6.1.2.1.10.7.20.1.1.1.8 | INTEGER | read-write | This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechanism
that prevents over current situations by disconnecting first
ports with lower power priority. Ports that connect devices
critical to the operation of the network - like the E911
telephones ports - should be set to higher priority. |
| INT pethPsePortDenyError | 1.3.6.1.2.1.10.7.20.1.1.1.9 | INTEGER | read-only | This object describes an error resulted from an action of the
power management mechanism. The value lowPriority(2) indicates
that the port was disabled by the power management system, in
order to keep active higher priority ports. |
| INT pethPsePortStatus | 1.3.6.1.2.1.10.7.20.1.1.1.10 | INTEGER | read-only | Describes a current port status related to the power generation
The value underCurrent(2) indicates that the port current
is below the minimal value.
The value overCurrent(3) indicates that the port current
exceeds the maximal value.
The value both(4) indicates that both underCurrent and overCurrent
status happend from the lase Clear. |
| INT pethPsePortStatusClear | 1.3.6.1.2.1.10.7.20.1.1.1.11 | INTEGER | read-write | Setting the value of this object to clear(1) clears the value
of the pethPsePortStatus to none(1). |
| INT pethPsePortType | 1.3.6.1.2.1.10.7.20.1.1.1.12 | INTEGER | read-write | A manager will set the value of this variable to a value
that indicates the type of the device that is connected
to theport. This value can be the result of the mapping
the address of the station connected to the port and of
the value of the pethPdPortType of the respective PD port. |
| INT pethPsePortPowerClassifications | 1.3.6.1.2.1.10.7.20.1.1.1.13 | INTEGER | read-only | Classification is a way to tag different terminals on the
power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their power requirements.
Class Usage Maximum Power
0 Default 0.5 - 15.0 W
1 Optional 0.5 - 4.0 W
2 Optional 4.0 - 7.0 W
3 Optional 7.0 - 15.0 W
4 Optional Future Use
5 Optional Future Use |
| pethPdPortTable | 1.3.6.1.2.1.10.7.20.1.2 | | not-accessible | A table of objects that display and control the power
characteristics power Ethernet ports on a Powered
Device(PD) device. This group will be implemented in
managed powered and mid-span devices. |
| pethPdPortEntry | 1.3.6.1.2.1.10.7.20.1.2.1 | | not-accessible | A set of objects that display and control the power
characteristics of a Powered Device port. |
| INT pethPdPortIndex | 1.3.6.1.2.1.10.7.20.1.2.1.1 | INTEGER | not-accessible | An index value that uniquely identifies an
interface to a PD device. The
interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex. The mapping
between the ifIndex values and the numbering of
the port on the device is an implementation
issue. |
| INT pethPdPortPowerPairs | 1.3.6.1.2.1.10.7.20.1.2.1.2 | INTEGER | read-only | Describes the pairs in use.
A value of signal(1) menas that the signal pairs
only are in use.
A value of spare(2) means that the spare pairs
only are in use.
A value of both(3) means that both the signal
and the spare pairs are inuse. |
| INT pethPdPortDetectionOperStatus | 1.3.6.1.2.1.10.7.20.1.2.1.3 | INTEGER | read-only | Describes the operational status of the port detection.
The value off(1) means that the port does not receive
power and the detection algorithm might still be operating.
The value receivingPower(2) means that the port is
receiving power. |
| INT pethPdPortType | 1.3.6.1.2.1.10.7.20.1.2.1.4 | INTEGER | read-only | The type of the device. A management application may read
the value of this variable and use it for setting the
corresponding value of pethPsePortType of the port that
connects the device. |
| pethMainPseObjects | 1.3.6.1.2.1.10.7.20.1.3 | | | |
| pethMainPseTable | 1.3.6.1.2.1.10.7.20.1.3.1 | | not-accessible | A table of objects that display and control the Main power
on a PSE device. |
| pethMainPseEntry | 1.3.6.1.2.1.10.7.20.1.3.1.1 | | not-accessible | A set of objects that display and control the Main power
of a PSE. |
| INT pethMainPseGroupIndex | 1.3.6.1.2.1.10.7.20.1.3.1.1.1 | INTEGER | not-accessible | This variable uniquely identifies the group to which
power Ethernet PSE is connected. Group means box in the stack,
module in a rack. It is recommended that the value 1 be
used for non-modular devices |
| I32 pethMainPsePower | 1.3.6.1.2.1.10.7.20.1.3.1.1.2 | Integer32 | read-write | The nominal power of the PSE expressed in Watts. |
| INT pethMainPseOperStatus | 1.3.6.1.2.1.10.7.20.1.3.1.1.3 | INTEGER | read-only | The operational status of the main PSE. |
| G32 pethMainPseConsumptionPower | 1.3.6.1.2.1.10.7.20.1.3.1.1.4 | Gauge32 | read-only | Measured usage power expressed in Watts. |
| INT pethMainPseBackupPresent | 1.3.6.1.2.1.10.7.20.1.3.1.1.5 | INTEGER | read-only | This value reflects the presence and status
of a backup PSE . |
| INT pethMainPseBackupActivated | 1.3.6.1.2.1.10.7.20.1.3.1.1.6 | INTEGER | read-only | This variable reflects the activation status
of the backup PSE |
| INT pethMainPseUsageThreshold | 1.3.6.1.2.1.10.7.20.1.3.1.1.7 | INTEGER | read-write | The usage threshold expressed in percents for
comparing the measured power and initiating
an alarm if the threshold is exceeded. |
| pethTrapsControl | 1.3.6.1.2.1.10.7.20.1.4 | | | |
| pethTrapsControlTable | 1.3.6.1.2.1.10.7.20.1.4.1 | | not-accessible | A table of objects that display and control the Main power
on a PSE device. |
| pethTrapsControlEntry | 1.3.6.1.2.1.10.7.20.1.4.1.1 | | not-accessible | A set of objects that control the Trap events. |
| INT pethTrapsControlGroupIndex | 1.3.6.1.2.1.10.7.20.1.4.1.1.1 | INTEGER | not-accessible | This variable uniquely identifies the group. Group means
box in the stack, or module in a rack. It is recommended
that the value 1 is used for non-modular devices. |
| INT pethTrapsControlEnable | 1.3.6.1.2.1.10.7.20.1.4.1.1.2 | INTEGER | read-write | Enable Traps from Agent |
| pethNotifications | 1.3.6.1.2.1.10.7.20.2 | | | |
| NTF pethPsePortOnOffTrap | 1.3.6.1.2.1.10.7.20.2.1 | | | This trap indicate if Pse Port is delivering or not power to the PD. |
| NTF pethPsePortDenyTrap | 1.3.6.1.2.1.10.7.20.2.2 | | | This trap indicate Port Deny service. |
| NTF pethPsePortStatusTrap | 1.3.6.1.2.1.10.7.20.2.3 | | | This trap indicate Port Change Status. |
| NTF pethMainPseBackUpActivatedTrap | 1.3.6.1.2.1.10.7.20.2.4 | | | This trap indicates that BackUp PSE is Activated . |
| NTF pethMainPowerUsageTrap | 1.3.6.1.2.1.10.7.20.2.5 | | | This trap indicate PSE Threshold usage indication . |
| pethConformance | 1.3.6.1.2.1.10.7.20.3 | | | |
| pethCompliances | 1.3.6.1.2.1.10.7.20.3.1 | | | |
| pethCompliance | 1.3.6.1.2.1.10.7.20.3.1.1 | | | Describes the requirements for conformance to the
Power Ethernet MIB. |
| pethGroups | 1.3.6.1.2.1.10.7.20.3.2 | | | |
| pethPsePortGroup | 1.3.6.1.2.1.10.7.20.3.2.1 | | | PSE Port Objects. |
| pethPdPortGroup | 1.3.6.1.2.1.10.7.20.3.2.2 | | | PD Port Objects. |
| pethMainPseGroup | 1.3.6.1.2.1.10.7.20.3.2.3 | | | Main PSE Objects. |
| pethTrapsControlGroup | 1.3.6.1.2.1.10.7.20.3.2.4 | | | Trap Control Objects. |
