All MIBs › PETH-MIB › pethPdPortPowerPairs
pethPdPortPowerPairs
Module: PETH-MIB
OID (symbolic): PETH-MIB::pethPdPortPowerPairs
OID (numeric): 1.3.6.1.2.1.10.7.20.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the pairs in use. A value of signal(1) menas that the signal pairs only are in use. A value of spare(2) means that the spare pairs only are in use. A value of both(3) means that both the signal and the spare pairs are inuse.
What is pethPdPortPowerPairs?
This value reports which wire pairs, signal(1) only, spare(2) only, or both(3), the powered device is using to receive PoE power on this PD port. An admin uses it to verify a connected device's power-pair usage matches what the switch's PSE port is configured to source, helping troubleshoot power delivery mismatches. A value of both(3) confirms the device is drawing power over both pair sets rather than just one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.2.1.2 snmpwalk -v2c -c public <target> PETH-MIB::pethPdPortPowerPairs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.2.1.2.1 snmpget -v2c -c public <target> PETH-MIB::pethPdPortPowerPairs.1
Start monitoring vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PETH-MIB::pethPdPortPowerPairs OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.20 | powerEthernetMIB | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1 | pethObjects | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.2 | pethPdPortTable | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.2.1 | pethPdPortEntry | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.2.1.2 | pethPdPortPowerPairs | PETH-MIB |