All MIBs › PETH-MIB › pethPsePortPowerEnable
pethPsePortPowerEnable
Module: PETH-MIB
OID (symbolic): PETH-MIB::pethPsePortPowerEnable
OID (numeric): 1.3.6.1.2.1.10.7.20.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables power supply on this port. Setting this object at a value auto(1) enables power and detection mechanism for this port. Setting this object at a value off(2) disables power and detection mechanism for this port.
What is pethPsePortPowerEnable?
This value enables or disables Power over Ethernet on a PSE port: auto(1) turns on both power delivery and the powered-device detection mechanism, while off(2) disables both. An admin sets this to off(2) on a port that should never source PoE, such as one connected to another switch, to avoid accidentally powering equipment that isn't expecting it. Setting pethPsePortPowerEnable to auto(1) on a phone port lets the switch automatically detect and power an IP phone plugged into it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.3 snmpwalk -v2c -c public <target> PETH-MIB::pethPsePortPowerEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.3.1 snmpget -v2c -c public <target> PETH-MIB::pethPsePortPowerEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.7.20.1.1.1.3.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PETH-MIB::pethPsePortPowerEnable OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.20 | powerEthernetMIB | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1 | pethObjects | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1 | pethPsePortTable | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1 | pethPsePortEntry | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1.3 | pethPsePortPowerEnable | PETH-MIB |