All MIBs › PETH-MIB › pethPsePortStatusClear
pethPsePortStatusClear
Module: PETH-MIB
OID (symbolic): PETH-MIB::pethPsePortStatusClear
OID (numeric): 1.3.6.1.2.1.10.7.20.1.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting the value of this object to clear(1) clears the value of the pethPsePortStatus to none(1).
What is pethPsePortStatusClear?
Setting this value to clear(1) resets the accumulated pethPsePortStatus back to its normal (none/ok) state for the port. An admin uses this after investigating and resolving an underCurrent or overCurrent condition, so the status object reflects only new issues going forward rather than a stale historical flag. Writing pethPsePortStatusClear=clear(1) after fixing a bad cable clears the lingering overCurrent indication left on the port's status.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.11 snmpwalk -v2c -c public <target> PETH-MIB::pethPsePortStatusClear
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.11.1 snmpget -v2c -c public <target> PETH-MIB::pethPsePortStatusClear.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.7.20.1.1.1.11.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PETH-MIB::pethPsePortStatusClear OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.20 | powerEthernetMIB | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1 | pethObjects | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1 | pethPsePortTable | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1 | pethPsePortEntry | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1.11 | pethPsePortStatusClear | PETH-MIB |