All MIBs › PETH-MIB › pethPsePortPowerDetectionStatus
pethPsePortPowerDetectionStatus
Module: PETH-MIB
OID (symbolic): PETH-MIB::pethPsePortPowerDetectionStatus
OID (numeric): 1.3.6.1.2.1.10.7.20.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls the power detection mechanism of the port. Setting the value auto(1) enables the power detection mechanism of the port. Setting the value off(2) disables the power detection mechanism of the port. Setting the value test(3) puts the port in a test mode forcing continuous discovery without applying power regardless of whether PD detected.
What is pethPsePortPowerDetectionStatus?
This value controls the port's PoE detection mode: auto(1) enables normal powered-device detection, off(2) disables detection entirely, and test(3) forces continuous discovery cycling without ever applying power, regardless of whether a device is detected. An admin uses test(3) mode to safely probe what devices are present on a port without risking powering up unexpected equipment. Setting pethPsePortPowerDetectionStatus to off(2) on a data-only port prevents the switch from wasting detection cycles on it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.6 snmpwalk -v2c -c public <target> PETH-MIB::pethPsePortPowerDetectionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.6.1 snmpget -v2c -c public <target> PETH-MIB::pethPsePortPowerDetectionStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.7.20.1.1.1.6.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PETH-MIB::pethPsePortPowerDetectionStatus OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.20 | powerEthernetMIB | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1 | pethObjects | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1 | pethPsePortTable | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1 | pethPsePortEntry | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1.6 | pethPsePortPowerDetectionStatus | PETH-MIB |