All MIBs › PETH-MIB › pethPsePortDetectionOperStatus
pethPsePortDetectionOperStatus
Module: PETH-MIB
OID (symbolic): PETH-MIB::pethPsePortDetectionOperStatus
OID (numeric): 1.3.6.1.2.1.10.7.20.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the operational status of the port detection. A value of deliveringPower(1) indicates that the port executed the detection algorithm, found a PD connection and is currently delivering power. A value of off(2) indicates that the port did not find a PD connection and is not in serching mode. A value of searching(3) indicates that the detection algorithm is in work, and did not detect a valid PD. No power is currently provided. A value of fault(4) indicates that a fault was detected on the port .
What is pethPsePortDetectionOperStatus?
This value reports the port's current PoE detection result: deliveringPower(1) means a powered device was found and power is being supplied, off(2) means no device was found and the port isn't searching, searching(3) means detection is actively probing but hasn't found a valid device yet, and fault(4) means a fault was detected. An admin checks this to diagnose why a device plugged into a PoE port isn't powering up. A stuck value of searching(3) suggests the connected device isn't presenting a valid PoE signature, while fault(4) points to a hardware problem on the port or cable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.7 snmpwalk -v2c -c public <target> PETH-MIB::pethPsePortDetectionOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.7.1 snmpget -v2c -c public <target> PETH-MIB::pethPsePortDetectionOperStatus.1
Start monitoring vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PETH-MIB::pethPsePortDetectionOperStatus OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, RFC 3621 (Power over Ethernet, PSE/PD) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.20 | powerEthernetMIB | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1 | pethObjects | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1 | pethPsePortTable | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1 | pethPsePortEntry | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1.7 | pethPsePortDetectionOperStatus | PETH-MIB |