OMNI-gx2dualdrr2x-MIB

All MIBs › OMNI-gx2dualdrr2x-MIB

Category: Cable/DOCSIS

Description: Manages the Cisco/Scientific-Atlanta GX2 Dual DRR2X dual-port downstream RF receiver card in HFC optical node deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2dualdrr2x-MIB?

OMNI-gx2dualdrr2x-MIB is a legacy proprietary MIB (built on GX2HFC-MIB/NLSBBN-TRAPS-MIB) reporting analog/digital telemetry for the gx2dualdrr2x HFC (Hybrid Fiber-Coax) module — a dual optical receiver. Its analog table records per-parameter (e.g., received optical power 1/2) label, unit of measure, major/minor high/low thresholds, current value, state flag, min/max recorded value, and alarm state, with companion digital-status and factory tables. As a status/performance MIB it lets an administrator watch received optical power against alarm thresholds on this legacy HFC dual-receiver module. It is deployed on legacy HFC (Hybrid Fiber-Coax) dual optical-receiver equipment. Engineers can download the OMNI-gx2dualdrr2x-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2dualdrr2x-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (gx2dualdrr2x dual optical receiver module)

Monitoring Examples

An administrator checks dualdrr2xcurrentValueRecdOptPwr1 against dualdrr2xminorLowRecdOptPwr1 to catch a degrading optical receiver on this legacy HFC module.

What Can Be Monitored

received optical power against alarm thresholds

Imported Objects

From GX2HFC-MIB

gx2DualDrr2x

OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF trapdualdrrConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.35.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapdualdrrConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.35.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapdualdrr12VCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.3			This trap is issued when the 12V power supply Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdualdrrModuleTempAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.4			This trap is issued when the Internal Module Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdualdrrFanSpeedAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.5			This trap is issued when the Fan Speed parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdualdrrFlashAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.6			This trap is issued when the detects an error during Flash memory operations.
NTF trapdualdrrBankBootAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.7			This trap is issued when the module detects an error while booting from bank 0 or bank 1.
NTF trapdualdrrAlarmDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.8			This trap is issued when the Alarm Data CRC is incorrect.
NTF trapdualdrrHardwareErrAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.9			This trap is issued when hardware is abnormal.
NTF trapdualdrrOpticalSignal1Alarm	1.3.6.1.4.1.1166.6.1.2.35.0.10			This trap is issued when the optical signal 1 is beyond the preset range.
NTF trapdualdrrOpticalSignal2Alarm	1.3.6.1.4.1.1166.6.1.2.35.0.11			This trap is issued when the optical signal 2 is beyond the preset range.
NTF trapdualdrrFactoryDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.12			This trap is issued when the Factory Data CRC is incorrect.
NTF trapdualdrrResetFactoryDefaultAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.13			This trap is issued when the Factory Default Reset occurs.
NTF trapdualdrrTripPoint1Alarm	1.3.6.1.4.1.1166.6.1.2.35.0.14			This trap is issued when the Input 1 optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM.
NTF trapdualdrrTripPoint2Alarm	1.3.6.1.4.1.1166.6.1.2.35.0.15			This trap is issued when the Input 2 optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM.
NTF trapdualdrrLink1Alarm	1.3.6.1.4.1.1166.6.1.2.35.0.16			This trap is issued when receiver 1 is out of SYN with transmitter
NTF trapdualdrrLink2Alarm	1.3.6.1.4.1.1166.6.1.2.35.0.17			This trap is issued when receiver 2 is out of SYN with transmitter
NTF trapdualdrrCalibrationDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.18			This trap is issued when the Calibration Data CRC is incorrect
NTF trapdualdrrSFP1OptPWRAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.19			This trap is issued when SFP 1's optical power is incorrect
NTF trapdualdrrDRT1Cur24VAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.20			This trap is issued when DRT 1's 24 volt current is incorrect
NTF trapdualdrrDRT1ModTempAarm	1.3.6.1.4.1.1166.6.1.2.35.0.21			This trap is issued when DRT 1's Module telperature is incorrect
NTF trapdualdrrSFP2OptPWRAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.22			This trap is issued when SFP 2's optical power is incorrect
NTF trapdualdrrDRT2Cur24VAlarm	1.3.6.1.4.1.1166.6.1.2.35.0.23			This trap is issued when DRT 2's 24 volt current is incorrect
NTF trapdualdrrDRT2ModTempAarm	1.3.6.1.4.1.1166.6.1.2.35.0.24			This trap is issued when DRT 2's Module telperature is incorrect
gx2dualdrr2xDescriptor	1.3.6.1.4.1.1166.6.1.2.35.1
gx2dualdrr2xAnalogTable	1.3.6.1.4.1.1166.6.1.2.35.2		not-accessible	This table contains gx2dualdrr2x specific analog parameters with nominal,limits and current values.
gx2dualdrr2xAnalogEntry	1.3.6.1.4.1.1166.6.1.2.35.2.1		not-accessible	This list contains the analog parameters and descriptions.
INT gx2dualdrr2xAnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.35.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR dualdrr2xlabelRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.2	DisplayString	read-only	The value of this object provides the label of the Channel 1 Received Opt power Analog parameter.
STR dualdrr2xuomRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.3	DisplayString	read-only	The value of this object provides the Unit of Measure of the Channel 1 Received Opt power Analog parameter.
FLO dualdrr2xmajorHighRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.4	Float	read-only	This object is not used by this module and always returns the value of the Channel 1 Received Opt power Major High Alarm Limit Analog parameter.
FLO dualdrr2xmajorLowRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.5	Float	read-only	This object is not used by this module and always returns the value of the Channel 1 Received Opt power Major High Alarm Limit Analog parameter.
FLO dualdrr2xminorHighRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.6	Float	read-only	This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence.
FLO dualdrr2xminorLowRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.7	Float	read-only	This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence.
FLO dualdrr2xcurrentValueRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.8	Float	read-write	The value of this object provides the Current value of the Channel 1 Received Opt power.
INT dualdrr2xstateFlagRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.9	INTEGER	read-only	The value of this object provides the state of the Channel 1 Received Opt power Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.10	Float	read-only	The value of this object provides the minimum value of the Channel 1 Received Opt power.
FLO dualdrr2xmaxValueRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.11	Float	read-only	The value of this object provides the maximum value of the Channel 1 Received Opt power.
INT dualdrr2xalarmStateRecdOptPwr1	1.3.6.1.4.1.1166.6.1.2.35.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the Channel 1 Received Opt power.
STR dualdrr2xlabelRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.13	DisplayString	read-only	The value of this object provides the label of the Channel 2 Received Opt power Analog parameter.
STR dualdrr2xuomRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the Channel 2 Received Opt power Analog parameter.
FLO dualdrr2xmajorHighRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.15	Float	read-only	This object is not used by this module and always returns the value of the Channel 2 Received Opt power Major High Alarm Limit Analog parameter.
FLO dualdrr2xmajorLowRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.16	Float	read-only	This object is not used by this module and always returns the value of the Channel 2 Received Opt power Major High Alarm Limit Analog parameter.
FLO dualdrr2xminorHighRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.17	Float	read-only	This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence.
FLO dualdrr2xminorLowRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.18	Float	read-only	This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence.
FLO dualdrr2xcurrentValueRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.19	Float	read-write	The value of this object provides the Current value of the Channel 2 Received Opt power.
INT dualdrr2xstateFlagRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.20	INTEGER	read-only	The value of this object provides the state of the Channel 2 Received Opt power Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.21	Float	read-only	The value of this object provides the minimum value of the Channel 2 Received Opt power.
FLO dualdrr2xmaxValueRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.22	Float	read-only	The value of this object provides the maximum value of the Channel 2 Received Opt power.
INT dualdrr2xalarmStateRecdOptPwr2	1.3.6.1.4.1.1166.6.1.2.35.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the Channel 2 Received optical power.
STR dualdrr2xlabelModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.24	DisplayString	read-only	The value of this object provides the label of the Module Temperature Analog parameter.
STR dualdrr2xuomModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.25	DisplayString	read-only	The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
FLO dualdrr2xmajorHighModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.26	Float	read-only	The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
FLO dualdrr2xmajorLowModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.27	Float	read-only	The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
FLO dualdrr2xminorHighModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.28	Float	read-only	The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
FLO dualdrr2xminorLowModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.29	Float	read-only	The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
FLO dualdrr2xcurrentValueModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.30	Float	read-only	The value of this object provides the Current value of the Module Temperature Analog parameter.
INT dualdrr2xstateFlagModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.31	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.32	Float	read-only	The value of this object provides the minimum value the Module Temperature Analog parameter can achive.
FLO dualdrr2xmaxValueModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.33	Float	read-only	The value of this object provides the maximum value the Module Temperature Analog parameter can achive.
INT dualdrr2xalarmStateModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.34	INTEGER	read-only	The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
STR dualdrr2xlabel12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.35	DisplayString	read-only	The value of this object provides the label of the 12v power supply Current Analog parameter.
STR dualdrr2xuom12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.36	DisplayString	read-only	The value of this object provides the Unit of Measure of the 12v power supply Current Analog parameter.
FLO dualdrr2xmajorHigh12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.37	Float	read-only	The value of this object provides the Major High alarm value of the 12v power supply Current Analog parameter.
FLO dualdrr2xmajorLow12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.38	Float	read-only	The value of this object provides the Major Low alarm value of the 12v power supply Current Analog parameter.
FLO dualdrr2xminorHigh12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.39	Float	read-only	The value of this object provides the Minor High alarm value of the 12v power supply Current Analog parameter.
FLO dualdrr2xminorLow12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.40	Float	read-only	The value of this object provides the Minor Low alarm value of the 12v power supply Current Analog parameter.
FLO dualdrr2xcurrentValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.41	Float	read-only	The value of this object provides the Current value of the 12v power supply Current parameter.
INT dualdrr2xstateFlag12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.42	INTEGER	read-only	The value of this object provides the state of the 12v power supply Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.43	Float	read-only	The value of this object provides the minimum value the 12v power supply Current Analog parameter can achive.
FLO dualdrr2xmaxValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.44	Float	read-only	The value of this object provides the maximum value the 12v power supply Current Analog parameter can achive.
INT dualdrr2xalarmState12VCurrent	1.3.6.1.4.1.1166.6.1.2.35.2.1.45	INTEGER	read-only	The value of this object provides the curent alarm state of the 12v power supply Current Analog parameter.
STR dualdrr2xlabelFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.46	DisplayString	read-only	The value of this object provides the label of the Fan Speed Analog parameter.
STR dualdrr2xuomFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.47	DisplayString	read-only	The value of this object provides the Unit of Measure of the Fan Speed Analog parameter.
FLO dualdrr2xmajorHighFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.48	Float	read-only	The value of this object provides the Major High alarm value of the Fan Speed Analog parameter.
FLO dualdrr2xmajorLowFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.49	Float	read-only	The value of this object provides the Major Low alarm value of the Fan Speed Analog parameter.
FLO dualdrr2xminorHighFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.50	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.51	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.52	Float	read-only	The value of this object provides the current value of the Fan Speed Analog parameter.
INT dualdrr2xstateFlagFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.53	INTEGER	read-only	The value of this object provides the state of the Fan Speed Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.54	Float	read-only	The value of this object provides the minimum value the Fan Speed Analog parameter can achive.
FLO dualdrr2xmaxValueFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.55	Float	read-only	The value of this object provides the maximum value the Fan Speed Analog parameter can achive.
INT dualdrr2xalarmStateFanSpeed	1.3.6.1.4.1.1166.6.1.2.35.2.1.56	INTEGER	read-only	The value of this object provides the curent alarm state of the Fan Speed Analog parameter.
STR dualdrr2xlabelTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.57	DisplayString	read-only	The value of this object provides the label of the Tx 0 SFP Wavelength Analog parameter.
STR dualdrr2xuomTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.58	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 0 SFP Wavelength Analog parameter.
FLO dualdrr2xmajorHighTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.59	Float	read-only	The value of this object provides the Major High alarm value of the Tx 0 SFP Wavelength Analog parameter.
FLO dualdrr2xmajorLowTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.60	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 0 SFP Wavelength Analog parameter.
FLO dualdrr2xminorHighTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.61	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.62	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.63	Float	read-only	The value of this object provides the current value of the Tx 0 SFP Wavelength Analog parameter.
INT dualdrr2xstateFlagTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.64	INTEGER	read-only	The value of this object provides the state of the Tx 0 SFP Wavelength Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.65	Float	read-only	The value of this object provides the minimum value the Tx 0 SFP Wavelength Analog parameter can achive.
FLO dualdrr2xmaxValueTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.66	Float	read-only	The value of this object provides the maximum value the Tx 0 SFP Wavelength Analog parameter can achive.
INT dualdrr2xalarmStateTx0SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.67	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 0 SFP Wavelength Analog parameter.
STR dualdrr2xlabelTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.68	DisplayString	read-only	The value of this object provides the label of the Tx 0 Optical Power Analog parameter.
STR dualdrr2xuomTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.69	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 0 Optical Power Analog parameter.
FLO dualdrr2xmajorHighTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.70	Float	read-only	The value of this object provides the Major High alarm value of the Tx 0 Optical Power Analog parameter.
FLO dualdrr2xmajorLowTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.71	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 0 Optical Power Analog parameter.
FLO dualdrr2xminorHighTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.72	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.73	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.74	Float	read-only	The value of this object provides the current value of the Tx 0 Optical Power Analog parameter.
INT dualdrr2xstateFlagTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.75	INTEGER	read-only	The value of this object provides the state of the Tx 0 Optical Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.76	Float	read-only	The value of this object provides the minimum value the Tx 0 Optical Power Analog parameter can achive.
FLO dualdrr2xmaxValueTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.77	Float	read-only	The value of this object provides the maximum value the Tx 0 Optical Power Analog parameter can achive.
INT dualdrr2xalarmStateTx0OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.78	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 0 Optical Power Analog parameter.
STR dualdrr2xlabelTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.79	DisplayString	read-only	The value of this object provides the label of the Tx 0 24 Volt Current Analog parameter.
STR dualdrr2xuomTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.80	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 0 24 Volt Current Analog parameter.
FLO dualdrr2xmajorHighTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.81	Float	read-only	The value of this object provides the Major High alarm value of the Tx 0 24 Volt Current Analog parameter.
FLO dualdrr2xmajorLowTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.82	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 0 24 Volt Current Analog parameter.
FLO dualdrr2xminorHighTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.83	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.84	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.85	Float	read-only	The value of this object provides the current value of the Tx 0 24 Volt Current Analog parameter.
INT dualdrr2xstateFlagTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.86	INTEGER	read-only	The value of this object provides the state of the Tx 0 24 Volt Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.87	Float	read-only	The value of this object provides the minimum value the Tx 0 24 Volt Current Analog parameter can achive.
FLO dualdrr2xmaxValueTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.88	Float	read-only	The value of this object provides the maximum value the Tx 0 24 Volt Current Analog parameter can achive.
INT dualdrr2xalarmStateTx024vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.89	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 0 24 Volt Current Analog parameter.
STR dualdrr2xlabelTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.90	DisplayString	read-only	The value of this object provides the label of the Tx 0 24 Volt supply voltage Analog parameter.
STR dualdrr2xuomTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.91	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 0 24 Volt supply voltage Analog parameter.
FLO dualdrr2xmajorHighTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.92	Float	read-only	The value of this object provides the Major High alarm value of the Tx 0 24 Volt supply voltage Analog parameter.
FLO dualdrr2xmajorLowTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.93	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 0 24 Volt supply voltage Analog parameter.
FLO dualdrr2xminorHighTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.94	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.95	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.96	Float	read-only	The value of this object provides the current value of the Tx 0 24 Volt supply voltage Analog parameter.
INT dualdrr2xstateFlagTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.97	INTEGER	read-only	The value of this object provides the state of the Tx 0 24 Volt supply voltage Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.98	Float	read-only	The value of this object provides the minimum value the Tx 0 24 Volt supply voltage Analog parameter can achive.
FLO dualdrr2xmaxValueTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.99	Float	read-only	The value of this object provides the maximum value the Tx 0 24 Volt supply voltage Analog parameter can achive.
INT dualdrr2xalarmStateTx024Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.100	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 0 24 Volt supply voltage Analog parameter.
STR dualdrr2xlabelTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.101	DisplayString	read-only	The value of this object provides the label of the Tx 0 24 Module Temperature Analog parameter.
STR dualdrr2xuomTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.102	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 0 Module Temperature Analog parameter.
FLO dualdrr2xmajorHighTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.103	Float	read-only	The value of this object provides the Major High alarm value of the Tx 0 Module Temperature Analog parameter.
FLO dualdrr2xmajorLowTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.104	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 0 Module Temperature Analog parameter.
FLO dualdrr2xminorHighTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.105	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.106	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.107	Float	read-only	The value of this object provides the current value of the Tx 0 Module Temperature Analog parameter.
INT dualdrr2xstateFlagTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.108	INTEGER	read-only	The value of this object provides the state of the Tx 0 Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.109	Float	read-only	The value of this object provides the minimum value the Tx 0 Module Temperature Analog parameter can achive.
FLO dualdrr2xmaxValueTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.110	Float	read-only	The value of this object provides the maximum value the Tx 0 Module Temperature Analog parameter can achive.
INT dualdrr2xalarmStateTx0ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.111	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 0 Module Temperature Analog parameter.
STR dualdrr2xlabelTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.112	DisplayString	read-only	The value of this object provides the label of the Tx 1 SFP Wavelength Analog parameter.
STR dualdrr2xuomTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.113	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 1 SFP Wavelength Analog parameter.
FLO dualdrr2xmajorHighTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.114	Float	read-only	The value of this object provides the Major High alarm value of the Tx 1 SFP Wavelength Analog parameter.
FLO dualdrr2xmajorLowTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.115	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 1 SFP Wavelength Analog parameter.
FLO dualdrr2xminorHighTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.116	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.117	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.118	Float	read-only	The value of this object provides the current value of the Tx 1 SFP Wavelength Analog parameter.
INT dualdrr2xstateFlagTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.119	INTEGER	read-only	The value of this object provides the state of the Tx 1 SFP Wavelength Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.120	Float	read-only	The value of this object provides the minimum value the Tx 1 SFP Wavelength Analog parameter can achive.
FLO dualdrr2xmaxValueTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.121	Float	read-only	The value of this object provides the maximum value the Tx 1 SFP Wavelength Analog parameter can achive.
INT dualdrr2xalarmStateTx1SFPWave	1.3.6.1.4.1.1166.6.1.2.35.2.1.122	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 1 SFP Wavelength Analog parameter.
STR dualdrr2xlabelTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.123	DisplayString	read-only	The value of this object provides the label of the Tx 1 Optical Power Analog parameter.
STR dualdrr2xuomTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.124	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 1 Optical Power Analog parameter.
FLO dualdrr2xmajorHighTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.125	Float	read-only	The value of this object provides the Major High alarm value of the Tx 1 Optical Power Analog parameter.
FLO dualdrr2xmajorLowTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.126	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 1 Optical Power Analog parameter.
FLO dualdrr2xminorHighTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.127	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.128	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.129	Float	read-only	The value of this object provides the current value of the Tx 1 Optical Power Analog parameter.
INT dualdrr2xstateFlagTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.130	INTEGER	read-only	The value of this object provides the state of the Tx 1 Optical Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.131	Float	read-only	The value of this object provides the minimum value the Tx 1 Optical Power Analog parameter can achive.
FLO dualdrr2xmaxValueTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.132	Float	read-only	The value of this object provides the maximum value the Tx 1 Optical Power Analog parameter can achive.
INT dualdrr2xalarmStateTx1OptPwr	1.3.6.1.4.1.1166.6.1.2.35.2.1.133	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 1 Optical Power Analog parameter.
STR dualdrr2xlabelTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.134	DisplayString	read-only	The value of this object provides the label of the Tx 1 24 VoltCurrent Analog parameter.
STR dualdrr2xuomTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.135	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 1 24 Volt Current Analog parameter.
FLO dualdrr2xmajorHighTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.136	Float	read-only	The value of this object provides the Major High alarm value of the Tx 1 24 Volt Current Analog parameter.
FLO dualdrr2xmajorLowTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.137	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 1 24 Volt Current Analog parameter.
FLO dualdrr2xminorHighTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.138	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.139	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.140	Float	read-only	The value of this object provides the current value of the Tx 1 24 Volt Current Analog parameter.
INT dualdrr2xstateFlagTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.141	INTEGER	read-only	The value of this object provides the state of the Tx 1 24 Volt Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.142	Float	read-only	The value of this object provides the minimum value the Tx 1 24 Volt Current Analog parameter can achive.
FLO dualdrr2xmaxValueTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.143	Float	read-only	The value of this object provides the maximum value the Tx 1 24 Volt Current Analog parameter can achive.
INT dualdrr2xalarmStateTx124vCurr	1.3.6.1.4.1.1166.6.1.2.35.2.1.144	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 1 24 Volt Current Analog parameter.
STR dualdrr2xlabelTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.145	DisplayString	read-only	The value of this object provides the label of the Tx 1 24 Volt supply voltage Analog parameter.
STR dualdrr2xuomTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.146	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 1 24 Volt supply voltage Analog parameter.
FLO dualdrr2xmajorHighTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.147	Float	read-only	The value of this object provides the Major High alarm value of the Tx 1 24 Volt supply voltage Analog parameter.
FLO dualdrr2xmajorLowTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.148	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 1 24 Volt supply voltage Analog parameter.
FLO dualdrr2xminorHighTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.149	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.150	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.151	Float	read-only	The value of this object provides the current value of the Tx 1 24 Volt supply voltage Analog parameter.
INT dualdrr2xstateFlagTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.152	INTEGER	read-only	The value of this object provides the state of the Tx 1 24 Volt supply voltage Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.153	Float	read-only	The value of this object provides the minimum value the Tx 1 24 Volt supply voltage Analog parameter can achive.
FLO dualdrr2xmaxValueTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.154	Float	read-only	The value of this object provides the maximum value the Tx 1 24 Volt supply voltage Analog parameter can achive.
INT dualdrr2xalarmStateTx124Volt	1.3.6.1.4.1.1166.6.1.2.35.2.1.155	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 1 24 Volt supply voltage Analog parameter.
STR dualdrr2xlabelTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.156	DisplayString	read-only	The value of this object provides the label of the Tx 1 24 Module Temperature Analog parameter.
STR dualdrr2xuomTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.157	DisplayString	read-only	The value of this object provides the Unit of Measure of the Tx 1 Module Temperature Analog parameter.
FLO dualdrr2xmajorHighTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.158	Float	read-only	The value of this object provides the Major High alarm value of the Tx 1 Module Temperature Analog parameter.
FLO dualdrr2xmajorLowTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.159	Float	read-only	The value of this object provides the Major Low alarm value of the Tx 1 Module Temperature Analog parameter.
FLO dualdrr2xminorHighTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.160	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xminorLowTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.161	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO dualdrr2xcurrentValueTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.162	Float	read-only	The value of this object provides the current value of the Tx 1 Module Temperature Analog parameter.
INT dualdrr2xstateFlagTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.163	INTEGER	read-only	The value of this object provides the state of the Tx 1 Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO dualdrr2xminValueTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.164	Float	read-only	The value of this object provides the minimum value the Tx 1 Module Temperature Analog parameter can achive.
FLO dualdrr2xmaxValueTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.165	Float	read-only	The value of this object provides the maximum value the Tx 1 Module Temperature Analog parameter can achive.
INT dualdrr2xalarmStateTx1ModTemp	1.3.6.1.4.1.1166.6.1.2.35.2.1.166	INTEGER	read-only	The value of this object provides the curent alarm state of the Tx 1 Module Temperature Analog parameter.
gx2dualdrr2xDigitalTable	1.3.6.1.4.1.1166.6.1.2.35.3		not-accessible	This table contains gx2dualdrr2x specific digital parameters with nominal and current values.
gx2dualdrr2xDigitalEntry	1.3.6.1.4.1.1166.6.1.2.35.3.2		not-accessible	This list contains individual digital parameters and descriptions.
INT gx2dualdrr2xDigitalTableIndex	1.3.6.1.4.1.1166.6.1.2.35.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR dualdrr2xlabelTrippoint1Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.2	DisplayString	read-only	The value of this object provides the label of the Trip point Value Digital parameter. The trip point Value defines the RF switch point based on the optical power input to the DRR
STR dualdrr2xenumTrippoint1Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.3	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueTrippoint1Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.4	INTEGER	read-write	The value of this object reflects the setting of the threshold at which the Trip point activates. It is in 1 dB increments ranging from -25 to -5 dB. The user can enter a number from 0 to 20, where 0 = -5db and 19 = -25db
INT dualdrr2xstateflagTrippoint1Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.5	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelTrippoint1Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.6	DisplayString	read-only	The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical power input to the DRR
STR dualdrr2xenumTrippoint1Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.7	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueTrippoint1Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.8	INTEGER	read-write	The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical power is higher than the preset trippoint value, no operational difference for these three modes. If module input optical power is less than the preset trippoint value, 1) When trippoint mode is OFF, no trippoint alarm will be generated and RF output impedance will stay normal as low. 2) When tripoint mode is ALARM_ONLY, trip_point alarm will be generated when the input optical power lower than the preset trippoint level but RF output impedance will stay normal as low. 3) When trippoint mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will switch to abnorml
INT dualdrr2xstateflagTrippoint1Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.9	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelTrippoint2Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.10	DisplayString	read-only	The value of this object provides the label of the Trip point Value Digital parameter. The trip point Value defines the RF switch point based on the optical power input to the DRR
STR dualdrr2xenumTrippoint2Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.11	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueTrippoint2Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.12	INTEGER	read-write	The value of this object reflects the setting of the threshold at which the Trip point activates. It is in 1 dB increments ranging from -25 to -5 dB. The user can enter a number from 0 to 20, where 0 = -5db and 19 = -25db
INT dualdrr2xstateflagTrippoint2Value	1.3.6.1.4.1.1166.6.1.2.35.3.2.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelTrippoint2Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.14	DisplayString	read-only	The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical power input to the DRR
STR dualdrr2xenumTrippoint2Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.15	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueTrippoint2Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.16	INTEGER	read-write	The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical power is higher than the preset trippoint value, no operational difference for these three modes. If module input optical power is less than the preset trippoint value, 1) When trippoint mode is OFF, no trippoint alarm will be generated and RF output impedance will stay normal as low. 2) When tripoint mode is ALARM_ONLY, trip_point alarm will be generated when the input optical power lower than the preset trippoint level but RF output impedance will stay normal as low. 3) When trippoint mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will switch to abnorml
INT dualdrr2xstateflagTrippoint2Mode	1.3.6.1.4.1.1166.6.1.2.35.3.2.17	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelGainChannel1A	1.3.6.1.4.1.1166.6.1.2.35.3.2.18	DisplayString	read-only	The value of this object provides the label of the RF Channel 1A Gain Digital parameter.
STR dualdrr2xenumGainChannel1A	1.3.6.1.4.1.1166.6.1.2.35.3.2.19	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueGainChannel1A	1.3.6.1.4.1.1166.6.1.2.35.3.2.20	INTEGER	read-write	The value of this object reflects the setting of the gain for RF Channel 1A. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from 0 to 20
INT dualdrr2xstateflagGainChannel1A	1.3.6.1.4.1.1166.6.1.2.35.3.2.21	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelGainChannel1B	1.3.6.1.4.1.1166.6.1.2.35.3.2.22	DisplayString	read-only	The value of this object provides the label of the RF Channel 1B Gain Digital parameter.
STR dualdrr2xenumGainChannel1B	1.3.6.1.4.1.1166.6.1.2.35.3.2.23	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueGainChannel1B	1.3.6.1.4.1.1166.6.1.2.35.3.2.24	INTEGER	read-write	The value of this object reflects the setting of the gain for RF Channel 1B. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from 0 to 20
INT dualdrr2xstateflagGainChannel1B	1.3.6.1.4.1.1166.6.1.2.35.3.2.25	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelGainChannel2A	1.3.6.1.4.1.1166.6.1.2.35.3.2.26	DisplayString	read-only	The value of this object provides the label of the RF Channel 2A Gain Digital parameter.
STR dualdrr2xenumGainChannel2A	1.3.6.1.4.1.1166.6.1.2.35.3.2.27	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueGainChannel2A	1.3.6.1.4.1.1166.6.1.2.35.3.2.28	INTEGER	read-write	The value of this object reflects the setting of the gain for RF Channel 2A. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from 0 to 20
INT dualdrr2xstateflagGainChannel2A	1.3.6.1.4.1.1166.6.1.2.35.3.2.29	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelGainChannel2B	1.3.6.1.4.1.1166.6.1.2.35.3.2.30	DisplayString	read-only	The value of this object provides the label of the RF Channel 2B Gain Digital parameter.
STR dualdrr2xenumGainChannel2B	1.3.6.1.4.1.1166.6.1.2.35.3.2.31	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueGainChannel2B	1.3.6.1.4.1.1166.6.1.2.35.3.2.32	INTEGER	read-write	The value of this object reflects the setting of the gain for RF Channel 2B. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from 0 to 20
INT dualdrr2xstateflagGainChannel2B	1.3.6.1.4.1.1166.6.1.2.35.3.2.33	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelTestpointSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.34	DisplayString	read-only	The value of this object provides the label of the Module's test point select Digital parameter.
STR dualdrr2xenumTestpointSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.35	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueTestpointSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.36	INTEGER	read-write	The value of this object reflects the setting of the test point selector for The Module. The user can enter a number from 1 to 4
INT dualdrr2xstateflagTestpointSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.37	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelOpFrequency	1.3.6.1.4.1.1166.6.1.2.35.3.2.38	DisplayString	read-only	The value of this object provides the label of the Module's active channels Digital parameter.
STR dualdrr2xenumOpFrequency	1.3.6.1.4.1.1166.6.1.2.35.3.2.39	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueOpFrequency	1.3.6.1.4.1.1166.6.1.2.35.3.2.40	INTEGER	read-write	The value of this object reflects which channels are active for The Module. The user can enter a number from 1 to 4
INT dualdrr2xstateflagOpFrequency	1.3.6.1.4.1.1166.6.1.2.35.3.2.41	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelActChanSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.42	DisplayString	read-only	The value of this object provides the label of the Module's active channels Digital parameter.
STR dualdrr2xenumActChanSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.43	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT dualdrr2xvalueActChanSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.44	INTEGER	read-write	The value of this object reflects which channels are active for The Module. The user can enter a number from 1 to 4
INT dualdrr2xstateflagActChanSelect	1.3.6.1.4.1.1166.6.1.2.35.3.2.45	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.35.3.2.46	DisplayString	read-only	The value of this object provides the label of the Factory Default Reset Digital parameter.
STR dualdrr2xenumFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.35.3.2.47	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT dualdrr2xvalueFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.35.3.2.48	INTEGER	read-write	The read of this value will return a invalid value. The read will not reflect the actual setting value for this parameter
INT dualdrr2xstateflagFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.35.3.2.49	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
gx2dualdrr2xStatusTable	1.3.6.1.4.1.1166.6.1.2.35.4		not-accessible	This table contains gx2dualdrr2x specific status parameters with nominal and current values.
gx2dualdrr2xStatusEntry	1.3.6.1.4.1.1166.6.1.2.35.4.3		not-accessible	This list contains Status parameters and descriptions.
INT gx2dualdrr2xStatusTableIndex	1.3.6.1.4.1.1166.6.1.2.35.4.3.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR dualdrr2xlabelBoot	1.3.6.1.4.1.1166.6.1.2.35.4.3.2	DisplayString	read-only	The value of this object provides the label of the Boot Status parameter.
INT dualdrr2xvalueBoot	1.3.6.1.4.1.1166.6.1.2.35.4.3.3	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagBoot	1.3.6.1.4.1.1166.6.1.2.35.4.3.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelFlash	1.3.6.1.4.1.1166.6.1.2.35.4.3.5	DisplayString	read-only	The value of this object provides the label of the Flash Status parameter.
INT dualdrr2xvalueFlash	1.3.6.1.4.1.1166.6.1.2.35.4.3.6	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagFlash	1.3.6.1.4.1.1166.6.1.2.35.4.3.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.35.4.3.8	DisplayString	read-only	The value of this object provides the label of the Factory Data CRC Status parameter.
INT dualdrr2xvalueFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.35.4.3.9	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.35.4.3.10	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.35.4.3.11	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT dualdrr2xvalueAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.35.4.3.12	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.35.4.3.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.35.4.3.14	DisplayString	read-only	The value of this object provides the label of the Calibration Data Crc parameter.
INT dualdrr2xvalueCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.35.4.3.15	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.35.4.3.16	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelHardwareStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.17	DisplayString	read-only	The value of this object provides the label of the Module Hardware Status parameter.
INT dualdrr2xvalueHardwareStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.18	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagHardwareStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.19	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelCh1TripPointStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.20	DisplayString	read-only	The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip point value
INT dualdrr2xvalueCh1TripPointStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.21	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagCh1TripPointStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.22	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelLink1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.23	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT dualdrr2xvalueLink1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.24	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagLink1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.25	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelCh2TripPointStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.26	DisplayString	read-only	The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip point value
INT dualdrr2xvalueCh2TripPointStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.27	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagCh2TripPointStatus	1.3.6.1.4.1.1166.6.1.2.35.4.3.28	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelLink2Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.29	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT dualdrr2xvalueLink2Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.30	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagLink2Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.31	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelDRT1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.32	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT dualdrr2xvalueDRT1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.33	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagDRT1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.34	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelSFP0Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.35	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT dualdrr2xvalueSFP0Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.36	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagSFP0Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.37	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelDRT2Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.38	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT dualdrr2xvalueDRT2Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.39	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagDRT2Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.40	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR dualdrr2xlabelSFP1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.41	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT dualdrr2xvalueSFP1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.42	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT dualdrr2xstateflagSFP1Status	1.3.6.1.4.1.1166.6.1.2.35.4.3.43	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
gx2dualdrr2xFactoryTable	1.3.6.1.4.1.1166.6.1.2.35.5		not-accessible	This table contains gx2dualdrr2x specific factory setting parameters with nominal and current values.
gx2dualdrr2xFactoryEntry	1.3.6.1.4.1.1166.6.1.2.35.5.4		not-accessible	This list contains Factory setting parameters and descriptions.
INT gx2dualdrr2xFactoryTableIndex	1.3.6.1.4.1.1166.6.1.2.35.5.4.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT dualdrr2xbootControlByte	1.3.6.1.4.1.1166.6.1.2.35.5.4.2	INTEGER	read-only	The value of this object indicates which bank the firmware is currently being boot from.
INT dualdrr2xbootStatusByte	1.3.6.1.4.1.1166.6.1.2.35.5.4.3	INTEGER	read-only	This object indicates the status of the last boot
INT dualdrr2xbank1CRC	1.3.6.1.4.1.1166.6.1.2.35.5.4.4	INTEGER	read-only	This object provides the CRC code of bank 0.
INT dualdrr2xbank2CRC	1.3.6.1.4.1.1166.6.1.2.35.5.4.5	INTEGER	read-only	This object provides the CRC code of bank 1.
INT dualdrr2xprgEEPROMByte	1.3.6.1.4.1.1166.6.1.2.35.5.4.6	INTEGER	read-only	This object indicates if the EEPROM has been programmed
INT dualdrr2xfactoryCRC	1.3.6.1.4.1.1166.6.1.2.35.5.4.7	INTEGER	read-only	This object provides the CRC code for the Factory data.
INT dualdrr2xcalculateCRC	1.3.6.1.4.1.1166.6.1.2.35.5.4.8	INTEGER	read-only	This object indicates which of the Emnums will have the CRC calculated (1-factory, 2-alarm, 3-calibration).
INT dualdrr2xhourMeter	1.3.6.1.4.1.1166.6.1.2.35.5.4.9	INTEGER	read-only	This object provides the hour meter reading of the module.
INT dualdrr2xflashPrgCntA	1.3.6.1.4.1.1166.6.1.2.35.5.4.10	INTEGER	read-only	This object provides the number of times Bank 0 flash has been programmed.
INT dualdrr2xflashPrgCntB	1.3.6.1.4.1.1166.6.1.2.35.5.4.11	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
STR dualdrr2xflashBankARev	1.3.6.1.4.1.1166.6.1.2.35.5.4.12	DisplayString	read-only	This object provides the revision of flash bank 0.
STR dualdrr2xflashBankBRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.13	DisplayString	read-only	This object provides the revision of flash bank 1.
STR dualdrr2xSubAgentRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.14	DisplayString	read-only	This object provides the subagent revision of receiver module.
STR dualdrr2xFPGA0FwRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.15	DisplayString	read-only	This object provides the Firmware revision of the first DRR FPGA.
STR dualdrr2xFPGA1FwRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.16	DisplayString	read-only	This object provides the Firmware revision of the second DRR FPGA.
STR dualdrr2xDRT1SerialNo	1.3.6.1.4.1.1166.6.1.2.35.5.4.17	DisplayString	read-only	This object provides the Serial Number of the DRT attached to channel 1.
STR dualdrr2xDRT1SFPSerialNo	1.3.6.1.4.1.1166.6.1.2.35.5.4.18	DisplayString	read-only	This object provides the Serial Number of the SFP in the DRT attached to channel 1.
STR dualdrr2xDRT1SFPPartNo	1.3.6.1.4.1.1166.6.1.2.35.5.4.19	DisplayString	read-only	This object provides the Part number of the SFP in the DRT attached to channel 1.
STR dualdrr2xDRT1FwRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.20	DisplayString	read-only	This object provides the Firmware revision of the DRT attached to channel 1.
STR dualdrr2xDRT1FpgaFwRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.21	DisplayString	read-only	This object provides the Firmware revision of the FPGA in the DRT attached to channel 1.
STR dualdrr2xDRT2SerialNo	1.3.6.1.4.1.1166.6.1.2.35.5.4.22	DisplayString	read-only	This object provides the Serial Number of the DRT attached to channel 2
STR dualdrr2xDRT2SFPSerialNo	1.3.6.1.4.1.1166.6.1.2.35.5.4.23	DisplayString	read-only	This object provides the Serial Number of the SFP in the DRT attached to channel 2
STR dualdrr2xDRT2SFPPartNo	1.3.6.1.4.1.1166.6.1.2.35.5.4.24	DisplayString	read-only	This object provides the Part number of the SFP in the DRT attached to channel 2.
STR dualdrr2xDRT2FwRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.25	DisplayString	read-only	This object provides the Firmware revision of the DRT attached to channel 2.
STR dualdrr2xDRT2FpgaFwRev	1.3.6.1.4.1.1166.6.1.2.35.5.4.26	DisplayString	read-only	This object provides the Firmware revision of the FPGA in the DRT attached to channel 2.

RFC description

Manages OMNISTAR GX2 Dual Digital Return 2X receiver modules in HFC cable networks with device type descriptors.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (gx2dualdrr2x dual optical receiver module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2dualdrr2x-MIB

What Is OMNI-gx2dualdrr2x-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description