PBC-CMTS-MIB

All MIBs › PBC-CMTS-MIB

Organization: Pacific Broadband Communications

Last Updated: 2001-06-21

Category: Cable/DOCSIS, DSL and Broadband

Description: Manages Pacific Broadband Communications CMTS equipment, covering downstream/upstream channel configuration and cable modem registration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PBC-CMTS-MIB?

PBC-CMTS-MIB is Pacific Broadband Communications' vendor-specific MIB defining objects common across its CMTS (Cable Modem Termination System) product line, used in DOCSIS cable broadband networks to manage headend cable-modem termination equipment. No sample objects were captured for this entry, but per its stated scope this typically means downstream/upstream RF channel parameters and cable modem registration/session tracking shared across PBC CMTS products. Its role in monitoring centers on hardware and RF-channel status - verifying that downstream/upstream channels are operational and cable modems are properly registered - an indicator of headend and network health for the cable plant. As a DOCSIS CMTS platform it very likely depends on or complements standard DOCSIS/CMTS-related IETF MIBs (e.g. DOCS-IF-MIB) for full channel management, even though this module defines PBC-common extensions. It's deployed at cable-operator headends on Pacific Broadband Communications CMTS chassis serving residential/commercial cable-modem subscribers, where PBC-CMTS-MIB SNMP monitoring supports headend and RF-channel health checks.

IPNetwork Monitor allows you to monitor SNMP objects defined in PBC-CMTS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Pacific Broadband Communications CMTS chassis

Monitoring Examples

Sample_objects is empty for this module, so no concrete object names can be cited from this dataset; a typical scenario per its stated scope would be checking common CMTS chassis/channel status objects shared across the PBC product line, likely correlated with DOCS-IF-MIB downstream/upstream tables, but this cannot be grounded in specific objects here.

What Can Be Monitored

downstream/upstream channel status
cable modem registration status
CMTS chassis common status

Imported Objects

From DOCS-CABLE-DEVICE-MIB

docsDevEvId	OBJECT-TYPE
docsDevEvLevel	OBJECT-TYPE
docsDevEvText	OBJECT-TYPE

From DOCS-IF-MIB

docsIfCmtsCmStatusEntry	OBJECT-TYPE
docsIfCmtsCmStatusIndex	OBJECT-TYPE

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From PBC-ENT-MIB

pacificBroadband	MODULE-IDENTITY
pbcCaps	OBJECT-IDENTITY
pbcManagement	OBJECT-IDENTITY
pbcModuleRegs	OBJECT-IDENTITY

From PBC-GENERIC-MIB

pbcCardIfPortIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
TEXTUAL-CONVENTION
TimeInterval
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
pbcCmtsMib	1.3.6.1.4.1.5987.1.1.2			This module defines all management objects which are common to PBC CMTS products.
pbcCmts	1.3.6.1.4.1.5987.2.2
pbcCmtsIfMibExtendedObjects	1.3.6.1.4.1.5987.2.2.1
pbcGeneral	1.3.6.1.4.1.5987.2.2.1.1
pbcDownStreamMgmt	1.3.6.1.4.1.5987.2.2.1.2
U32 pbcCmtsIfDownstreamNumEntries	1.3.6.1.4.1.5987.2.2.1.2.1	Unsigned32	read-only	Number of downstream channels represented in the downstream channel table.
pbcCmtsIfDownstreamChannelTable	1.3.6.1.4.1.5987.2.2.1.2.2		not-accessible	PBC-specific management objects associated with downstream channels.
pbcCmtsIfDownstreamChannelEntry	1.3.6.1.4.1.5987.2.2.1.2.2.1		not-accessible	PBC-specific management objects associated with one downstream channel.
INT pbcCmtsIfDownstreamIfTxPower	1.3.6.1.4.1.5987.2.2.1.2.2.1.1	INTEGER	read-only	Intermediate Frequency (IF) signal power being supplied to the upconverter on this channel.
pbcUpStreamMgmt	1.3.6.1.4.1.5987.2.2.1.3
U32 pbcCmtsIfUpstreamNumEntries	1.3.6.1.4.1.5987.2.2.1.3.1	Unsigned32	read-only	Number of upstream channels in the upstream channel table.
pbcCmtsIfUpstreamChannelTable	1.3.6.1.4.1.5987.2.2.1.3.2		not-accessible	PBC-specific management objects associated with upstream channels.
pbcCmtsIfUpstreamChannelEntry	1.3.6.1.4.1.5987.2.2.1.3.2.1		not-accessible	PBC extended US management objects for one US channel.
I32 pbcCmtsIfUpstreamPort	1.3.6.1.4.1.5987.2.2.1.3.2.1.1	Integer32	read-write	Associates the upstream channel with one of the physical upstream cable connectors. A value of -1 indicates that the channel currently is not associated with any port.
INT pbcCmtsIfUpstreamOperMode	1.3.6.1.4.1.5987.2.2.1.3.2.1.2	INTEGER	read-write	Controls the usage of this channel as follows: 1 = available (for use) 2 = standby (for redundancy purposes) 3 = inUse (channel is configured for data) 4 = scanning (doing dedicated spectral analysis) 5 = unlicensed (a 'key' is required to access the channel)
TEN pbcCmtsIfUpstreamCmdRcvdPwr	1.3.6.1.4.1.5987.2.2.1.3.2.1.3	TenthdBmV	read-write	Commanded received power.
TEN pbcCmtsIfUpstreamPowerLevel	1.3.6.1.4.1.5987.2.2.1.3.2.1.4	TenthdBmV	read-only	Upstream's sample-based measured received signal power.
TEN pbcCmtsIfUpstreamMER	1.3.6.1.4.1.5987.2.2.1.3.2.1.5	TenthdB	read-only	Upstream channel's modulation error ratio expressed in dB.
C32 pbcCmtsIfUpstreamHcsErrors	1.3.6.1.4.1.5987.2.2.1.3.2.1.6	Counter32	read-only	Channel's HCS errors detected.
C32 pbcCmtsIfUpstreamCrcErrors	1.3.6.1.4.1.5987.2.2.1.3.2.1.7	Counter32	read-only	CRC errors detected on this channel.
G32 pbcCmtsIfUpstreamCER	1.3.6.1.4.1.5987.2.2.1.3.2.1.8	Gauge32	read-only	Percentage of codewords that had unrecoverable errors.
U32 pbcCmtsIfUpstreamCmTotal	1.3.6.1.4.1.5987.2.2.1.3.2.1.9	Unsigned32	read-only	Total Number of CMs in this Upstream Channel.
U32 pbcCmtsIfUpstreamCmRangeAborted	1.3.6.1.4.1.5987.2.2.1.3.2.1.10	Unsigned32	read-only	Total Number of CMs with Range Abort Status in this Upstream Channel.
U32 pbcCmtsIfUpstreamCmRanging	1.3.6.1.4.1.5987.2.2.1.3.2.1.11	Unsigned32	read-only	Total Number of Ranging CMs in this Upstream Channel.
U32 pbcCmtsIfUpstreamCmRangingComplete	1.3.6.1.4.1.5987.2.2.1.3.2.1.12	Unsigned32	read-only	Total Number of CMs with Ranging Complete Status in this Upstream Channel.
U32 pbcCmtsIfUpstreamCmIpComplete	1.3.6.1.4.1.5987.2.2.1.3.2.1.13	Unsigned32	read-only	Total Number of CMs with IP Complete Status in this Upstream Channel.
U32 pbcCmtsIfUpstreamCmRegistered	1.3.6.1.4.1.5987.2.2.1.3.2.1.14	Unsigned32	read-only	Total Number of Registered CMs in this Upstream Channel.
U32 pbcCmtsIfUpstreamCmRogue	1.3.6.1.4.1.5987.2.2.1.3.2.1.15	Unsigned32	read-only	Total Number of Rogue CMs in this Upstream Channel.
pbcMacMgmt	1.3.6.1.4.1.5987.2.2.1.4
pbcCmtsIfMacTable	1.3.6.1.4.1.5987.2.2.1.4.1		not-accessible	Description.
pbcCmtsIfMacEntry	1.3.6.1.4.1.5987.2.2.1.4.1.1		not-accessible	Description.
U32 pbcCmtsIfMacCmTotal	1.3.6.1.4.1.5987.2.2.1.4.1.1.1	Unsigned32	read-only	Number of CMs in this MAC domain.
U32 pbcCmtsIfMacCmRangeAborted	1.3.6.1.4.1.5987.2.2.1.4.1.1.2	Unsigned32	read-only	Number of CMs with Ranging aborted status in this MAC domain.
U32 pbcCmtsIfMacCmRanging	1.3.6.1.4.1.5987.2.2.1.4.1.1.3	Unsigned32	read-only	Number of CMs with Ranging status in this MAC domain.
U32 pbcCmtsIfMacCmRangingComplete	1.3.6.1.4.1.5987.2.2.1.4.1.1.4	Unsigned32	read-only	Number of Ranging completed CMs in this MAC domain.
U32 pbcCmtsIfMacCmIpComplete	1.3.6.1.4.1.5987.2.2.1.4.1.1.5	Unsigned32	read-only	Number of CMs with IP Complete status in this MAC domain.
U32 pbcCmtsIfMacCmRegistered	1.3.6.1.4.1.5987.2.2.1.4.1.1.6	Unsigned32	read-only	Number of Registered CMs in this MAC domain.
U32 pbcCmtsIfMacCmRogue	1.3.6.1.4.1.5987.2.2.1.4.1.1.7	Unsigned32	read-only	Number of Rogue CMs in this MAC domain.
pbcCmtsCmMgmt	1.3.6.1.4.1.5987.2.2.1.5
pbcCmtsCmStatusTable	1.3.6.1.4.1.5987.2.2.1.5.1		not-accessible	Extention of docsIfCmtsCmStatusTable.
pbcCmtsCmStatusEntry	1.3.6.1.4.1.5987.2.2.1.5.1.1		not-accessible	Extention of docsIfCmtsCmStatusEntry.
DAT pbcCmtsCmStatusFirstOnline	1.3.6.1.4.1.5987.2.2.1.5.1.1.1	DateAndTime	read-only	Date and Time when CM was seen by the system for the first time.
DAT pbcCmtsCmStatusLastOnline	1.3.6.1.4.1.5987.2.2.1.5.1.1.2	DateAndTime	read-only	Date and Time when the CM came online recently.
C32 pbcCmtsCmStatusTimesOnline	1.3.6.1.4.1.5987.2.2.1.5.1.1.3	Counter32	read-only	Number of times the CM came online.
U32 pbcCmtsCmStatusPercentOnline	1.3.6.1.4.1.5987.2.2.1.5.1.1.4	Unsigned32	read-only	Percent of time for the CM has been online.
NUM pbcCmtsCmStatusMinOnline	1.3.6.1.4.1.5987.2.2.1.5.1.1.5	TimeInterval	read-only	Minimum time interval the CM was online.
NUM pbcCmtsCmStatusMaxOnline	1.3.6.1.4.1.5987.2.2.1.5.1.1.6	TimeInterval	read-only	Maximum time interval the CM was online.
NUM pbcCmtsCmStatusAvgOnline	1.3.6.1.4.1.5987.2.2.1.5.1.1.7	TimeInterval	read-only	Average time interval the CM was online.
NUM pbcCmtsCmStatusMinOffline	1.3.6.1.4.1.5987.2.2.1.5.1.1.8	TimeInterval	read-only	Minimum time interval the CM was offline.
NUM pbcCmtsCmStatusMaxOffline	1.3.6.1.4.1.5987.2.2.1.5.1.1.9	TimeInterval	read-only	Maximum time interval the CM was offline.
NUM pbcCmtsCmStatusAvgOffline	1.3.6.1.4.1.5987.2.2.1.5.1.1.10	TimeInterval	read-only	Average time interval the CM was offline.
pbcCmtsRogueCmTable	1.3.6.1.4.1.5987.2.2.1.5.2		not-accessible	Contain information associated with all the Rogue Cable Modems detected by the CMTS.
pbcCmtsRogueCmEntry	1.3.6.1.4.1.5987.2.2.1.5.2.1		not-accessible	An entry would be created for every rogue Cable Modem detected by CMTS.
MAC pbcCmtsRogueCmMacAddress	1.3.6.1.4.1.5987.2.2.1.5.2.1.1	MacAddress	read-only	MAC Address of the Rogue CM.
IP pbcCmtsRogueCmIpAddress	1.3.6.1.4.1.5987.2.2.1.5.2.1.2	IpAddress	read-only	IP Address of the Rogue CM.
I32 pbcCmtsRogueCmPtr	1.3.6.1.4.1.5987.2.2.1.5.2.1.3	Integer32	read-only	An row index into docsIfCmtsCmStatusTable. When queried with the correct instance value (e.g. a CM's MAC address), returns the index in docsIfCmtsCmStatusTable which represents that CM.
INT pbcCmtsRogueCmType	1.3.6.1.4.1.5987.2.2.1.5.2.1.4	INTEGER	read-only	Type of the Rogue CM. Valid Values are unProvisioned (1), rigged (2), configured (3).
DAT pbcCmtsRogueCmFirstActive	1.3.6.1.4.1.5987.2.2.1.5.2.1.5	DateAndTime	read-only	Date and Time when CM was seen by the system for the first time.
DAT pbcCmtsRogueCmLastActive	1.3.6.1.4.1.5987.2.2.1.5.2.1.6	DateAndTime	read-only	Date and Time when the last time an IM was seen from this CM. The LastActive tells the latest time when CM was detected as rogue and put to rest.
pbcCmtsCableSpectrumManagement	1.3.6.1.4.1.5987.2.2.2
pbcCmtsSpectrumAnalysisMgmt	1.3.6.1.4.1.5987.2.2.2.2
pbcCmtsSpectrumAnalysisObjects	1.3.6.1.4.1.5987.2.2.2.2.1
pbcSpectrumAnalysisRFInputTable	1.3.6.1.4.1.5987.2.2.2.2.1.1		not-accessible	There is an entry in this table for each upstream input connector on each DOCSIS module in the CMTS. Each port is uniquely identified within the CMTS by its pbcCardIfPortIndex value. This index object is defined under the generic chassis management section of the PBC private MIB tree.
pbcSpectrumAnalysisRFInputEntry	1.3.6.1.4.1.5987.2.2.2.2.1.1.1		not-accessible	An entry in the RF monitoring input (port) table.
T/F pbcSpectrumAnalysisEnable	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.1	TruthValue	read-write	True ('1') enables spectrum estimation. This should be set only after setting the other parameters affecting the scan. After setting this 'true', pbcSpectrumAnalysisCmdStatus will reflect initial and, ultimately, final status of the sweep attempt.
INT pbcSpectrumAnalysisCmdStatus	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.2	INTEGER	read-write	Result of pbcSpectrumAnalysisEnable command.
U32 pbcSpectrumAnalysisIntegrationLen	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.3	Unsigned32	read-write	This specifies the number of estimates over which the peak of the noise power is calculated.
INT pbcSpectrumAnalysisFreqStep	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.4	INTEGER	read-write	The frequency step for scanning which defines the frequency resolution. The choices are: 20KHz, 40KHz, 80KHz and 160KHz.
U32 pbcSpectrumAnalysisFreqMin	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.5	Unsigned32	read-write	The low end of the frequency range being scanned. The lowest legal value, per both the DOCSIS and Euro-DOCSIS standards, is 5MHz.
U32 pbcSpectrumAnalysisFreqMax	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.6	Unsigned32	read-write	Top end of the frequency range being scanned. For DOCSIS, the maximum is 42MHz and for Euro-DOCSIS it is 65MHz.
U32 pbcSpectrumAnalysisArraySize	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.7	Unsigned32	read-write	This variable holds/specifies the number of scan data tables to be allocated to this particular scan instance. The size of each table and, therefore, the total amount of buffer space required is determined by the other scan parameters. If the agent is unable to allocate that amount of space, a status of 'noResources' will be returned in pbcSpectrumAnalysisCmdStatus following the setting of pbcSpectrumAnalysisEnable. If successful, this becomes the total number of table entries in pbcSpectrumAnalysisArrayIndexTable. A size of '2' is the absolute minimum to permit the agent to fill one table with data points while the management application is 'draining' the other.
U32 pbcSpectrumAnalysisActiveArray	1.3.6.1.4.1.5987.2.2.2.2.1.1.1.8	Unsigned32	read-only	Contains the pbcSpectrumAnalysisArrayIndex number of the data table currently being filled with spectral data points.
pbcSpectrumAnalysisArrayIndexTable	1.3.6.1.4.1.5987.2.2.2.2.1.2		not-accessible	The table serves as an index, with status, into the pbcSpectrumAnalysisDataTable, thus uniquely identifying all of the data points which constitute one spectral sweep.
pbcSpectrumAnalysisArrayIndexEntry	1.3.6.1.4.1.5987.2.2.2.2.1.2.1		not-accessible	An entry in the pbcSpectrumAnalysisArrayIndexTable.
U32 pbcSpectrumAnalysisArrayIndex	1.3.6.1.4.1.5987.2.2.2.2.1.2.1.1	Unsigned32	read-only	Index number of this data table.
INT pbcSpectrumAnalysisArrayStatus	1.3.6.1.4.1.5987.2.2.2.2.1.2.1.2	INTEGER	read-write	The operational status of this data table. The management application which is reading the spectrum monitoring data should, after reading all the data entries associated with this array (table),set this variable back to 'available'.
DAT pbcSpectrumAnalysisArrayScanStart	1.3.6.1.4.1.5987.2.2.2.2.1.2.1.3	DateAndTime	read-only	The date and time when this table's spectral sweep began.
DAT pbcSpectrumAnalysisArrayScanStop	1.3.6.1.4.1.5987.2.2.2.2.1.2.1.4	DateAndTime	read-only	The date and time when this table's spectral sweep was completed or stopped for some other reason.
pbcSpectrumAnalysisDataTable	1.3.6.1.4.1.5987.2.2.2.2.1.3		not-accessible	The Frequency-Power tuples are stored in this table. The maximum number of elements is determined by the size of the frequency step and the RF range to be scanned and can therefore not exceed 1850.
pbcSpectrumAnalysisDataEntry	1.3.6.1.4.1.5987.2.2.2.2.1.3.1		not-accessible	An entry in the spectrum analysis data table.
U32 pbcSpectrumAnalysisFrequency	1.3.6.1.4.1.5987.2.2.2.2.1.3.1.1	Unsigned32	read-only	The frequency that was sampled.
ONE pbcSpectrumAnalysisPower	1.3.6.1.4.1.5987.2.2.2.2.1.3.1.2	OneHundredthdBmVPerHz	read-only	Measured power in hundredths of a dBmV/Hz.
pbcCmtsSpectrumAnalysisNotificationEnables	1.3.6.1.4.1.5987.2.2.2.2.2
pbcCmtsSpectrumAnalysisNotificationTable	1.3.6.1.4.1.5987.2.2.2.2.2.1		not-accessible	Allows specific 'sweep complete' trap recipients to be specified on a per-port basis.
pbcCmtsSpectrumAnalysisNotificationEntry	1.3.6.1.4.1.5987.2.2.2.2.2.1.1		not-accessible	Contains the IP address of the desired trap recipient of 'sweep complete' notifications generated by active spectral monitoring on a specific US port.
T/F pbcCmtsSpectrumAnalysisEnableSweepNotification	1.3.6.1.4.1.5987.2.2.2.2.2.1.1.1	TruthValue	read-write	True ('1') enables 'sweep complete' notifications so that the receiver knows it may/should retrieve the current spectral data points.
IP pbcSweepNotificationRecipient	1.3.6.1.4.1.5987.2.2.2.2.2.1.1.2	IpAddress	read-write	The IP address of the management station wishing to receive the 'sweep complete' notifications from this system for this monitored port.
I32 pbcSweepNotificationRecipientPort	1.3.6.1.4.1.5987.2.2.2.2.2.1.1.3	Integer32	read-write	Port that recipient is listening on for notifications.
INT pbcCmtsSpectrumAnalysisNotificationType	1.3.6.1.4.1.5987.2.2.2.2.2.1.1.4	INTEGER	read-write	Selects between SNMPv2c and SNMPv3 traps.
pbcCmtsSpectrumAnalysisNotificationPrefix	1.3.6.1.4.1.5987.2.2.2.2.3
pbcCmtsSpectrumAnalysisNotifications	1.3.6.1.4.1.5987.2.2.2.2.3.1
NTF pbcCmtsSpectrumAnalysisSweepComplete	1.3.6.1.4.1.5987.2.2.2.2.3.1.1			Denotes the conclusion, with status and data table identification, of an RF sweep operation.
I32 pbcCardIfPortIndexID	1.3.6.1.4.1.5987.2.2.2.2.3.1.2	Integer32	accessible-for-notify	Instance of the pbcCardIfPortIndex to be bound with the Trap/Notify PDU.
I32 pbcSpectrumAnalysisArrayIndexID	1.3.6.1.4.1.5987.2.2.2.2.3.1.3	Integer32	accessible-for-notify	Instance of the pbcSpectrumAnalysisArrayIndex to be bound with the Trap/Notify PDU.
I32 pbcSpectrumAnalysisArrayStatusID	1.3.6.1.4.1.5987.2.2.2.2.3.1.4	Integer32	accessible-for-notify	Instance of the pbcSpectrumAnalysisArrayStatus to be bound with the Trap/Notify PDU.
pbcCmtsNotificationManagement	1.3.6.1.4.1.5987.2.2.3
T/F pbcCmtsEventsEnable	1.3.6.1.4.1.5987.2.2.3.1	TruthValue	read-write	Enables or disables vendor specific event generation.
BIT pbcCmtsNotificationsControl	1.3.6.1.4.1.5987.2.2.3.2	Bits	read-write	A '1' in a given bit position enables that class of notifications.
pbcCmtsSystemNotifications	1.3.6.1.4.1.5987.2.2.3.3
NTF pbcCmtsEnvMonNotification	1.3.6.1.4.1.5987.2.2.3.3.1			Notifications generated by environmental monitoring.
NTF pbcCmtsChassisNotification	1.3.6.1.4.1.5987.2.2.3.3.2			Chassis-related notifications.
NTF pbcCmtsSoftwareNotification	1.3.6.1.4.1.5987.2.2.3.3.3			Notifications from the software management system.
NTF pbcCmtsAccessNotification	1.3.6.1.4.1.5987.2.2.3.3.4			Access-related notifications.
NTF pbcCmtsConfigNotification	1.3.6.1.4.1.5987.2.2.3.3.5			Notifications related to configuration changes.
NTF pbcCmtsDataPathNotification	1.3.6.1.4.1.5987.2.2.3.3.6			Notifications related to datapath events.
NTF pbcCmtsRfInterfaceNotification	1.3.6.1.4.1.5987.2.2.3.3.7			Notifications related to datapath events.
NTF pbcCmtsFlapListNotification	1.3.6.1.4.1.5987.2.2.3.3.8			Notifications related to datapath events.
NTF pbcCmtsDebugNotification	1.3.6.1.4.1.5987.2.2.3.3.9			Notifications generated for internal debugging. This can be enabled by setting debug class of CMTS notifications.
NTF pbcCmtsCmStateChangeNotification	1.3.6.1.4.1.5987.2.2.3.3.10			Notifications generated to track MODEM state. This event can be enabled by setting cmStateChange bit of the CMTS Notification Control.
BIT pbcCmtsModemEventsEnable	1.3.6.1.4.1.5987.2.2.3.4	Bits	read-write	Enables or disables Modem De-Ranging and Registration event Generation.
pbcCmtsConformance	1.3.6.1.4.1.5987.2.2.4
pbcCmtsGroups	1.3.6.1.4.1.5987.2.2.4.1
pbcCmtsGroup	1.3.6.1.4.1.5987.2.2.4.1.1			Generic PBC CMTS registrations.
pbcCableSpectrumManagementGroup	1.3.6.1.4.1.5987.2.2.4.1.2			Group of objects implemented in Cable Modem Termination Systems providing Flap List information.
pbcCmtsNotificationManagementGroup	1.3.6.1.4.1.5987.2.2.4.1.3			Group of objects associated with vendor-specific notification control.
pbcCmtsNotificationGroup	1.3.6.1.4.1.5987.2.2.4.1.4			Generic PBC Notifications.
pbcFlapListManagementGroup	1.3.6.1.4.1.5987.2.2.4.1.5			Description.
pbcCmtsCompliances	1.3.6.1.4.1.5987.2.2.4.2
pbcCmtsBasicCompliance	1.3.6.1.4.1.5987.2.2.4.2.1			Object groups which must be supported.
pbcFlapListManagement	1.3.6.1.4.1.5987.2.2.5
pbcFlapListObjects	1.3.6.1.4.1.5987.2.2.5.1
U32 pbcCmtsFlapListAgeMinutes	1.3.6.1.4.1.5987.2.2.5.1.1	Unsigned32	read-write	Aging time in minutes (From 1 minute to 60 days).
U32 pbcCmtsFlapListIMRetryInterval	1.3.6.1.4.1.5987.2.2.5.1.2	Unsigned32	read-write	Duration between two consecutive IM Retries that is considered a flap event in seconds.
U32 pbcCmtsFlapListCERThreshold	1.3.6.1.4.1.5987.2.2.5.1.3	Unsigned32	read-write	CER Threshold 1 in millionth.
TEN pbcCmtsFlapListMERThreshold	1.3.6.1.4.1.5987.2.2.5.1.4	TenthdB	read-write	MER Threshold (in tenth of dB).
TEN pbcCmtsFlapListQPSKSNRThreshold	1.3.6.1.4.1.5987.2.2.5.1.5	TenthdB	read-write	QPSK SNR Threshold (in tenth of dB).
TEN pbcCmtsFlapListQAM16SNRThreshold	1.3.6.1.4.1.5987.2.2.5.1.6	TenthdB	read-write	QAM16 SNR Threshold (in tenth of dB).
TEN pbcCmtsFlapListPowerAdjustThreshold	1.3.6.1.4.1.5987.2.2.5.1.7	TenthdB	read-write	Power Adjust Threshold (in tenth of a dB).
U32 pbcCmtsFlapListSMMissThreshold	1.3.6.1.4.1.5987.2.2.5.1.8	Unsigned32	read-write	SM Miss Quantity Threshold.
U32 pbcCmtsFlapListFreqThreshold	1.3.6.1.4.1.5987.2.2.5.1.9	Unsigned32	read-write	Upstream Frequency drift Threshold (in Hertz). A non zero value of pbcCmtsUsFlapListFreqThreshold overrides this value for an upstream channel.
U32 pbcCmtsFlapListSize	1.3.6.1.4.1.5987.2.2.5.1.10	Unsigned32	read-write	Maximum number of entries in the Flap List Table.
pbcUsFlapListControlTable	1.3.6.1.4.1.5987.2.2.5.1.11		not-accessible	Various flap thresholds to be applied per upstream channel.
pbcUsFlapListControlEntry	1.3.6.1.4.1.5987.2.2.5.1.11.1		not-accessible	An entry for every upstream channel in the system.
U32 pbcUsFlapListControlIMRetryInterval	1.3.6.1.4.1.5987.2.2.5.1.11.1.1	Unsigned32	read-write	Duration in seconds between two consecutive IM Retries that is considered a flap event. A non zero value overrides the global pbcCmtsFlapListIMRetryInterval for this upstream channel.
U32 pbcUsFlapListControlCERThreshold	1.3.6.1.4.1.5987.2.2.5.1.11.1.2	Unsigned32	read-write	CER Threshold (in millionth, normalized 0 to 1). A non zero value overrides the global pbcCmtsFlapListCERThreshold for this upstream channel.
TEN pbcUsFlapListControlMERThreshold	1.3.6.1.4.1.5987.2.2.5.1.11.1.3	TenthdB	read-write	MER Threshold (in Tenth of a dB). A non zero value overrides the global pbcCmtsFlapListMERThreshold for this upstream channel.
TEN pbcUsFlapListControlQPSKSNRThreshold	1.3.6.1.4.1.5987.2.2.5.1.11.1.4	TenthdB	read-write	QPSK SNR Threshold (in tenth of dB). A non zero value overrides the global pbcCmtsFlapListQPSKSNRThreshold for this upstream channel.
TEN pbcUsFlapListControlQAM16SNRThreshold	1.3.6.1.4.1.5987.2.2.5.1.11.1.5	TenthdB	read-write	QAM16 SNR Threshold (in tenth of dB). A non zero value overrides the global pbcCmtsFlapListQPSKSNRThreshold for this upstream channel.
TEN pbcUsFlapListControlPowerAdjustThreshold	1.3.6.1.4.1.5987.2.2.5.1.11.1.6	TenthdB	read-write	Power Adjust Threshold (in dB). A non zero value overrides the global pbcCmtsFlapListPowerAdjustThreshold for this upstream channel.
U32 pbcUsFlapListControlSMMissThreshold	1.3.6.1.4.1.5987.2.2.5.1.11.1.7	Unsigned32	read-write	SM Miss Quantity Threshold. A non zero value overrides the global pbcCmtsFlapListSMMissThreshold for this upstream channel.
U32 pbcUsFlapListControlFreqThreshold	1.3.6.1.4.1.5987.2.2.5.1.11.1.8	Unsigned32	read-write	Upstream Frequency drift Threshold (in Hertz). A non zero value overrides the global pbcCmtsFlapListFreqThreshold for this upstream channel.
pbcCmtsFlapListTable	1.3.6.1.4.1.5987.2.2.5.1.12		not-accessible	information about the recently flapping cable modems according to the various thresholds set in the pbcCmtsFlapListObjects.
pbcCmtsFlapListEntry	1.3.6.1.4.1.5987.2.2.5.1.12.1		not-accessible	An entry for every Flapping modem in the system.
MAC pbcCmtsFlapListMacAddr	1.3.6.1.4.1.5987.2.2.5.1.12.1.1	MacAddress	read-only	MAC address of the Flapping modem.
NUM pbcCmtsFlapListUpstreamIfIndex	1.3.6.1.4.1.5987.2.2.5.1.12.1.2	InterfaceIndex	read-only	Upstream Interface Index of the Flapping modem.
NUM pbcCmtsFlapListDownstreamIfIndex	1.3.6.1.4.1.5987.2.2.5.1.12.1.3	InterfaceIndex	read-only	Downstream Interface Index of the Flapping modem.
C32 pbcCmtsFlapListFlapCount	1.3.6.1.4.1.5987.2.2.5.1.12.1.4	Counter32	read-only	Number of times the modem has Flapped.
INT pbcCmtsFlapListFlapCause	1.3.6.1.4.1.5987.2.2.5.1.12.1.5	INTEGER	read-only	Last flap cause for the modem.
U32 pbcCmtsFlapListFreqDrift	1.3.6.1.4.1.5987.2.2.5.1.12.1.6	Unsigned32	read-only	Amount of Frequency Drift in case pbcCmtsFlapListFlapCause is freqDrift (8). Form othe flap causes, this value should be 0.
T/F pbcCmtsFlapListEventsEnable	1.3.6.1.4.1.5987.2.2.5.1.13	TruthValue	read-write	Enables or disables the Flap List event generation.
pbcG10CMTS	1.3.6.1.4.1.5987.1001
pbcG1CMTS	1.3.6.1.4.1.5987.1002

RFC description

Vendor-private MIB for cable modem termination system (CMTS) management; manages cable network headend operations and statistics.

Start monitoring Pacific Broadband Communications CMTS chassis (DOCSIS channel/modem registration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PBC-CMTS-MIB

What Is PBC-CMTS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description