All MIBs › Nortel-MsCarrier-MscPassport-BgpMIB
Category: IP Routing & Forwarding, Nortel MsCarrier MscPassport
Description: Provides SNMP management objects for BGP routing protocol configuration and peer status on Nortel MsCarrier MscPassport.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-MsCarrier-MscPassport-BgpMIB?
This Nortel MsCarrier MscPassport MIB provides SNMP objects for configuring and monitoring the Border Gateway Protocol (BGP) routing process running on the Passport switch's virtual router (VR) IP stack. It exposes provisioning data such as the BGP identifier, local autonomous system number, default local preference, and peer-level row-status-controlled tables for establishing and managing BGP peering sessions. From a monitoring standpoint, the key use is tracking whether BGP peer entries remain in an active row status (an operational proxy for peer session health) and confirming that local AS and identifier configuration match network design, since this module does not expose granular route counts or hardware environmental data. It explicitly references the standard IETF BGP MIB (bgpMIB) as a conceptual counterpart and layers Nortel's own provisioning model (mscVrIpBgpProvTable, component name/index/storage type) on top of it. It is deployed on Nortel MsCarrier Passport switches acting as IP routers/route reflectors within carrier backbone or ISP networks. Engineers can download the Nortel-MsCarrier-MscPassport-BgpMIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-BgpMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel MsCarrier MscPassport switch/router
Monitoring Examples
A network engineer would poll mscVrIpBgpProvTable/mscVrIpBgpProvEntry to check the configured mscVrIpBgpBgpIdentifier and mscVrIpBgpLocalAs, then examine mscVrIpBgpPeer entries and their row status to confirm all expected BGP neighbors remain provisioned and active. A peer entry whose row status drops out of "active" or whose mscVrIpBgpDefaultLocalPreference is unexpectedly altered would signal a routing policy or peering session problem worth escalating. This MIB is provisioning-oriented, so anomalies are detected via configuration/row-status drift rather than live route or prefix counters.
What Can Be Monitored
- BGP peer row status
- local AS number
- BGP identifier
- default local preference
This MIB depends on
Related MIBs
Imported Objects
From Nortel-MsCarrier-MscPassport-IpMIB
| mscVrIp | OBJECT-IDENTITY |
| mscVrIpIndex | OBJECT-TYPE |
From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
| Counter32 | |
| DisplayString | |
| Gauge32 | |
| Integer32 | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-MsCarrier-MscPassport-TextualConventionsMIB
| AsciiString | |
| Hex | |
| HexString | |
| IntegerSequence | |
| NonReplicated |
From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
| mscPassportMIBs | OBJECT-IDENTITY |
From Nortel-MsCarrier-MscPassport-VirtualRouterMIB
| mscVrIndex | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| IpAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mscVrIpBgp | 1.3.6.1.4.1.562.36.2.1.100.6.21 | |||
| mscVrIpBgpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgp components. | |
| mscVrIpBgpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgp component. | |
| ROW mscVrIpBgpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgp components. These components can be added and deleted. |
| STR mscVrIpBgpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgp tables. |
| NON mscVrIpBgpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpBgp tables. |
| mscVrIpBgpPeer | 1.3.6.1.4.1.562.36.2.1.100.6.21.2 | |||
| mscVrIpBgpPeerRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpPeer components. | |
| mscVrIpBgpPeerRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpPeer component. | |
| ROW mscVrIpBgpPeerRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpPeer components. These components can be added and deleted. |
| STR mscVrIpBgpPeerComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpPeerStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpPeer tables. |
| IP mscVrIpBgpPeerPeerAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrIpBgpPeer tables. |
| mscVrIpBgpPeerProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10 | not-accessible | This group contains the provisionable attributes for this BGP Peer component | |
| mscVrIpBgpPeerProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1 | not-accessible | An entry in the mscVrIpBgpPeerProvTable. | |
| U32 mscVrIpBgpPeerPeerAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.1 | Unsigned32 | read-write | This attribute specifies the autonomous system identifier of this BGP Peer component. It will be used to verify the autonomous system identifier learned from the peer through the OPEN message. The peer connection will be rejected and a NOTIFICATION message will be sent to the peer if these two numbers don't match. |
| IP mscVrIpBgpPeerLocalAddressConfigured | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.2 | IpAddress | read-write | This attribute specifies the local IP address configured for this Bgp Peer connection. If this attribute is 0.0.0.0, TCP will choose a local IP interface based on the remote IP address of this peer connection and the IP forwarding table. The value chosen is stored in the localAddressUsed attribute under the same Peer component. |
| U32 mscVrIpBgpPeerKeepAliveConfigured | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.3 | Unsigned32 | read-write | This attribute specifies the configured interval in seconds, between BGP KEEPALIVE message retransmissions. It is used to establish the ratio between keepalive interval and hold time. If this attribute is zero, then the holdTimeConfigured attribute should also be zero, which means that periodic KEEPALIVE messages will not be sent. |
| U32 mscVrIpBgpPeerHoldTimeConfigured | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.4 | Unsigned32 | read-write | This attribute specifies the maximum time in seconds, that may elapse without receiving a KEEPALIVE or UPDATE message before the connection is considered down. The hold time must be either zero or at least three seconds. If this attribute is zero, then the keepAliveConfigured attribute should also be zero, which means that periodic KEEPALIVE messages will not be sent. |
| U32 mscVrIpBgpPeerConnectRetryTime | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.5 | Unsigned32 | read-write | This attribute specifies the time interval in seconds for the ConnectRetry timer. It is the minimum amount of time that must elapse between successive TCP connection retries for establishing BGP peer connection. |
| U32 mscVrIpBgpPeerMinAsOrigTime | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.6 | Unsigned32 | read-write | This attribute specifies the time interval in seconds for the MinAsOriginationInterval timer. It is the minimum amount of time that must elapse between updates that advertise a change to a route within the local autonomous system to neighboring autonomous systems. |
| U32 mscVrIpBgpPeerMinRouteAdvTime | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.7 | Unsigned32 | read-write | This attribute specifies the time interval in seconds for the MinRouteAdvertisementInterval timer. Feasible routes received from peers in other autonomous systems may only be re-advertised to peers in other autonomous systems at a rate no greater than MinRouteAdvertisementInterval. |
| U32 mscVrIpBgpPeerDefaultInAggMed | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.8 | Unsigned32 | read-write | This attribute specifies this Bgp Peer component instance's metric for generating a dynamic default route whenever this external bgp peer got established. It is used to prioritize between the dynamic default routes generated by Passport Bgp speakers. If this attribute is not set, Bgp will not generate a dynamic default route. If this attribute is set, Bgp will automatically generate a dynamic default route when the connection established. |
| INT mscVrIpBgpPeerIsRouteReflectorClient | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.9 | INTEGER | read-write | This attribute specifies whether the peer is a client peer or non- client peer of this Bgp instance. The attribute is only meaningful if attribute routeReflector of Bgp is true. |
| INT mscVrIpBgpPeerRemovePrivateAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.10 | INTEGER | read-write | This attribute specifies the treatment of the AS_PATH path attribute in routes sent to the peer. If this attribute is enabled, then BGP will remove private AS numbers from the AS_PATH. This attribute is meaningful only for external peers. |
| mscVrIpBgpPeerStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.11 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpBgpPeerStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1 | not-accessible | An entry in the mscVrIpBgpPeerStateTable. | |
| INT mscVrIpBgpPeerAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpBgpPeerOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpBgpPeerUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpBgpPeerOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12 | not-accessible | This group contains the operational attributes for the Peer component. | |
| mscVrIpBgpPeerOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1 | not-accessible | An entry in the mscVrIpBgpPeerOperTable. | |
| INT mscVrIpBgpPeerConnectionState | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.3 | INTEGER | read-only | This attribute indicates the current state of this BGP peer connection. The meaning of each state is as follows: idle - it is the initial state of the BGP peer connection. Error events will also cause BGP peer connection to transit to the idle state. connect - BGP has initiated a TCP connection request to this peer, and waiting for reply from that peer. active - BGP is not initiating a TCP connection request to this peer, because TCP connection failed and is waiting for connection retry time-out. openSent - a TCP connection to this peer has been established, but the OPEN message has not been successfully exchanged. openConfirm - OPEN message has been successfully exchanged with this peer, but the first KEEPALIVE message has not been received from that peer. established - the first KEEPALIVE message has been received from this peer, which means this BGP peer connection has been established. See RFC 1771 for a detailed description of BGP state transitions. |
| IP mscVrIpBgpPeerBgpIdentifier | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.4 | IpAddress | read-only | This attribute indicates the BGP Identifier of this Bgp Peer component. It is learned from the peer through the OPEN message. |
| U32 mscVrIpBgpPeerVersionNegotiated | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.5 | Unsigned32 | read-only | This attribute indicates the BGP version number negotiated with this peer through the OPEN message. Currently, only BGP version 4 is supported. BGP will reject the peer connection if our peer proposes a BGP version other than 4. |
| U32 mscVrIpBgpPeerHoldTimeNegotiated | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.6 | Unsigned32 | read-only | This attribute indicates the maximum time in seconds, that may elapse without receiving a KEEPALIVE or UPDATE message before the connection is considered down. This is the negotiated value with peer through the OPEN message. The hold time must be either zero or at least three seconds. If the negotiated hold time is zero, then periodic KEEPALIVE messages are not expected from the peer. |
| U32 mscVrIpBgpPeerKeepAliveNegotiated | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.7 | Unsigned32 | read-only | This attribute indicates the interval in seconds, between BGP KEEPALIVE message retransmissions. This keepalive interval will have the same ratio to the hold time negotiated with the peer as that of the locally configured keepalive and hold time. This attribute will be zero if the holdTimeNegotiated attribute is zero, which means periodic KEEPALIVE messages will not be sent. |
| IP mscVrIpBgpPeerLocalAddressUsed | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.8 | IpAddress | read-only | This attribute indicates the local IP address used for this BGP peer connection. If the localAddressConfigured attribute is non-zero, its value will be used. Otherwise, the local address will be assigned by TCP based on the remote IP address of this peer connection and the IP forwarding table. |
| U32 mscVrIpBgpPeerLocalPort | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.9 | Unsigned32 | read-only | This attribute indicates the local TCP port for the connection between the BGP peers. |
| U32 mscVrIpBgpPeerRemotePort | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.10 | Unsigned32 | read-only | This attribute indicates the remote TCP port for the connection between the BGP peers. |
| STR mscVrIpBgpPeerLastError | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.11 | HexString | read-only | This attribute indicates the last error code and subcode seen by this Bgp component instance on this peer connection. The first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. A value of zero means that no error has occurred. Check RFC 1771 for mappings of error codes and error subcodes. |
| G32 mscVrIpBgpPeerConnectionEstablishedTime | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.12 | Gauge32 | read-only | This attribute indicates how long since this Peer component's last transition to or from the established state. It is set to zero when the Peer component is activated. DESCRIPTION |
| C32 mscVrIpBgpPeerConnectionEstablishedTransitions | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.13 | Counter32 | read-only | This attribute counts the total number of times the BGP connection state transitioned into the established state. |
| G32 mscVrIpBgpPeerInUpdateElapsedTime | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.14 | Gauge32 | read-only | This attribute indicates the elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time inUpdates attribute is incremented, the value of this attribute is set to zero. |
| C32 mscVrIpBgpPeerInMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.15 | Counter32 | read-only | This attribute counts the number of BGP messages received without error from the BGP peer. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerInUpdates | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.16 | Counter32 | read-only | This attribute counts the number of BGP UPDATE messages received on this peer connection. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerInErrors | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.17 | Counter32 | read-only | This attribute counts the number of messages received from this BGP peer that proved to be in error. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerInErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.18 | Counter32 | read-only | This attribute counts the number of BGP NOTIFICATION messages received from this BGP peer. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerOutMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.19 | Counter32 | read-only | This attribute counts the number of locally generated BGP messages sent to this BGP peer. It does not include discarded messages. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerOutUpdates | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.20 | Counter32 | read-only | This attribute counts the number of BGP UPDATE messages sent to this peer. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerOutDiscards | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.21 | Counter32 | read-only | This attribute counts the number of locally generated BGP messages not sent to this BGP peer due to resource limitations within a BGP entity. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerOutErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.22 | Counter32 | read-only | This attribute counts the number of BGP NOTIFICATION messages sent to this BGP peer. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpPeerInRoutes | 1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.23 | Counter32 | read-only | This attribute indicates the number of routes received from this BGP peer. |
| mscVrIpBgpImport | 1.3.6.1.4.1.562.36.2.1.100.6.21.3 | |||
| mscVrIpBgpImportRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpImport components. | |
| mscVrIpBgpImportRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpImport component. | |
| ROW mscVrIpBgpImportRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpImport components. These components can be added and deleted. |
| STR mscVrIpBgpImportComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpImportStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpImport tables. |
| I32 mscVrIpBgpImportIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpBgpImport tables. |
| mscVrIpBgpImportNet | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2 | |||
| mscVrIpBgpImportNetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpImportNet components. | |
| mscVrIpBgpImportNetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpImportNet component. | |
| ROW mscVrIpBgpImportNetRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpImportNet components. These components can be added and deleted. |
| STR mscVrIpBgpImportNetComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpImportNetStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpImportNet tables. |
| I32 mscVrIpBgpImportNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpBgpImportNet tables. |
| mscVrIpBgpImportNetProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10 | not-accessible | This group contains the set of provisionable attributes for the Network component. | |
| mscVrIpBgpImportNetProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10.1 | not-accessible | An entry in the mscVrIpBgpImportNetProvTable. | |
| IP mscVrIpBgpImportNetPrefix | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10.1.1 | IpAddress | read-write | This attribute specifies the network prefix whose length is determined by the length attribute under the same Network component. |
| U32 mscVrIpBgpImportNetLength | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10.1.2 | Unsigned32 | read-write | This attribute specifies the length of the network prefix. |
| mscVrIpBgpImportProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10 | not-accessible | This group contains all the provisionable attributes for the Import component. | |
| mscVrIpBgpImportProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1 | not-accessible | An entry in the mscVrIpBgpImportProvTable. | |
| U32 mscVrIpBgpImportPeerAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.1 | Unsigned32 | read-write | This key attribute specifies the autonomous system number of the peer from which the routes are learned. A value of 0 for this attribute means that peer AS number will match any AS number. |
| IP mscVrIpBgpImportPeerIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.2 | IpAddress | read-write | This key attribute specifies the IP address of the peer from which the routes are learned. A value of 0.0.0.0 for this attribute means that peer IP address will match any IP address. |
| U32 mscVrIpBgpImportOriginAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.3 | Unsigned32 | read-write | This key attribute specifies the autonomous system number where the routes were originated. A value of 0 for this attribute means origin AS number will match any AS number. |
| INT mscVrIpBgpImportOriginProtocol | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.4 | INTEGER | read-write | This key attribute specifies the protocols that originated the routes. A value of incomplete for this attribute means this information is not available. |
| INT mscVrIpBgpImportUsageFlag | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.5 | INTEGER | read-write | This attribute specifies whether BGP will use or ignore information in received update if it meets criteria specified by the key attributes of this component. |
| U32 mscVrIpBgpImportLocalPreference | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.6 | Unsigned32 | read-write | This attribute specifies this Bgp component instance's degree of preference for those routes that match the criteria of this import policy. A higher value indicates a more preferred route. A value of 0 for this attribute means that the default local preference value provisioned under the Bgp component should be used. |
| INT mscVrIpBgpImportPreferredOver | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.7 | INTEGER | read-write | This attribute indicates the preference of the external BGP route with the OSPF internal route. overIntOspf means that the external BGP route is chosen over OSPF internal route, while underIntOspf means that the OSPF internal route is chosen over the external BGP route. The default preference is set to underIntOspf. |
| STR mscVrIpBgpImportAsPathExpression | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.8 | AsciiString | read-write | This key attribute allows the user to enter a regular expression to match the import AS Path Attribute of the received update message. Note: the AS Path Attribute lists the ASs in reverse traversal order. The syntax of the regular expression is a subset of the RFC 2280. The basic syntax of a regular expression is a list of AS number separated by a space which making up a AS path. The following characters has the special meaning: '.' - Matches any AS number. '^n' - Matches the first AS item (n) in the AS Path Attribute, or in order words, matches the last AS (n) traversed in the AS path. 'n$' - Matches the last AS item (n) in the AS Path Attribute, or in order words, matches the first AS (n) traversed in the AS path. '[n1 ... n2]' - Matches any AS number that appeared in the set n1 ... n2. 'n1 - n2' - Matches any AS number between the range of n1 and n2. '()' - is supported to change the order of evaluation. 'n*' - Matches 0 or more occurrences of n, where n can be a set, range or AS number. 'n+' - Matches 1 or more occurrences of n, where n can be a set, range or AS number. 'n?' - Matches 0 or 1 occurrences of n, where n can be a AS set, range or number. The following logical operators are evaluated in decending order: 'NOT' - Given a regular expression x, NOT x matches the AS number pattern that is not matched by x. 'AND' - Given two regular expressions x and y, x AND y matches the intersection of the AS path that are matched by x and those are matched by y. 'OR' - Given two regular expressions x and y, x OR y matches the union of the AS path that are matched by x and those are matched by y. For example: The AS path '5 4 3 2 1', where 1 is the origin AS, would be match by any one of the following regular expressions: 1$, ^5, 4 3, 5 3 - 4*, 5 [4 3 2] not10 2 1, not (6 7 8 9 10) and 5 4 .* 1 Empty regular expression implies a match on all AS path. |
| STR mscVrIpBgpImportCommunityExpression | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.9 | AsciiString | read-write | This key attribute allows the user to enter a regular expression to match the import Community Attribute of the received update message. The syntax of the regular expression is a subset of the RFC 2280. The basic syntax of a regular expression is a list of Community number seperated by a space which making up a Community attribute. The following characters has the special meaning: '[n1 ... n2]' - Matches any Community number that appeared in the set n1 ... n2. 'n1 - n2' - Matches any Community number between the range of n1 and n2. '()' - is supported to change the order of evaluation. 'n*' - Matches 0 or more occurrences of n, where n can be a set, range or Community number. 'n+' - Matches 1 or more occurrences of n, where n can be a set, range or Community number. 'n?' - Matches 0 or 1 occurrences of n, where n can be a set, range or number. The following logical operators are evaluated in decending order: 'NOT' - Given a regular expression x, NOT x matches the Community attribute that is not matched by x. 'AND' - Given two regular expressions x and y, x AND y matches the intersection of the Community attribute that are matched by x and those are matched by y. 'OR' - Given two regular expressions x and y, x OR y matches the union of the Community attribute that are matched by x and those are matched by y. For example: The Community path '1 2 3 4 5' would be match by any one of the following regular expression: 1, 5, 4 3, 2 3 - 4*, 1 [3 4 2]+, not (6 7 8 9 10) and 1 2 Empty regular expression implies a match on all Community path. |
| U32 mscVrIpBgpImportExpressPreference | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.10 | Unsigned32 | read-write | This attribute specifies the relative preference of the policy which use the keys expressAsPath and expressCommunity. This attribute is ignored if attributes expressAsPath and expressCommunity are both empty. This attribute is used to break the tie when two import policies' expression attributes match a specific AS Path or Community. A higher value indicates a more preferred policy. |
| U32 mscVrIpBgpImportAppendCommunity | 1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.11 | Unsigned32 | read-write | This attribute indicates which community number this Import policy will send along with the Path Attribute. Refer to RFC 1997 for the detailed description of how this attribute may be used to pass additional information to BGP peers. If the value is set to 0, no community is appended to the Community attribute. |
| mscVrIpBgpExport | 1.3.6.1.4.1.562.36.2.1.100.6.21.4 | |||
| mscVrIpBgpExportRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpExport components. | |
| mscVrIpBgpExportRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpExport component. | |
| ROW mscVrIpBgpExportRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpExport components. These components can be added and deleted. |
| STR mscVrIpBgpExportComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpExportStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpExport tables. |
| I32 mscVrIpBgpExportIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpBgpExport tables. |
| mscVrIpBgpExportNet | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2 | |||
| mscVrIpBgpExportNetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpExportNet components. | |
| mscVrIpBgpExportNetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpExportNet component. | |
| ROW mscVrIpBgpExportNetRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpExportNet components. These components can be added and deleted. |
| STR mscVrIpBgpExportNetComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpExportNetStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpExportNet tables. |
| I32 mscVrIpBgpExportNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpBgpExportNet tables. |
| mscVrIpBgpExportNetProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10 | not-accessible | This group contains the set of provisionable attributes for the Network component. | |
| mscVrIpBgpExportNetProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10.1 | not-accessible | An entry in the mscVrIpBgpExportNetProvTable. | |
| IP mscVrIpBgpExportNetPrefix | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10.1.1 | IpAddress | read-write | This attribute specifies the network prefix whose length is determined by the length attribute under the same Network component. |
| U32 mscVrIpBgpExportNetLength | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10.1.2 | Unsigned32 | read-write | This attribute specifies the length of the network prefix. |
| mscVrIpBgpExportProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10 | not-accessible | This group contains all the provisioned attributes for the Export component. | |
| mscVrIpBgpExportProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1 | not-accessible | An entry in the mscVrIpBgpExportProvTable. | |
| U32 mscVrIpBgpExportPeerAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.1 | Unsigned32 | read-write | This key attribute specifies the autonomous system number of the peer where the routes are advertised to. A value of 0 for this attribute means this export policy applies to all peer ASes. |
| IP mscVrIpBgpExportPeerIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.2 | IpAddress | read-write | This key attribute specifies the IP address of the peer where the routes are advertised to. A value of 0.0.0.0 for this attribute means this export policy applies to all peers. |
| INT mscVrIpBgpExportProtocol | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.3 | INTEGER | read-write | This key attribute specifies which protocol the export policy applies to. If it is set to all, that means this export policy will apply all routes in the IP routing table. Example: vr/1 ip ospf export/1 with advertise Status = block protocol = bgpExternal bgpAsId = 3 peerAs = 5 This policy specifies that all routes learned from EBGP Peers that are originated from AS 3 should not be advertised to AS 5. |
| U32 mscVrIpBgpExportEgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.4 | Unsigned32 | read-write | This key attribute specifies the EGP autonomous system number that this export policy will apply to. When this value is non-zero, the protocol attribute must be set to egp. |
| U32 mscVrIpBgpExportBgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.5 | Unsigned32 | read-write | This key attribute specifies the BGP autonomous system number that this export policy will apply to. When this value is non-zero, the protocol attribute must be set to either bgpInternal or bgpExternal. |
| HEX mscVrIpBgpExportOspfTag | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.6 | Hex | read-write | This key attribute specifies the OSPF tag when the protocol attribute is set to either ospfInternal or ospfExternal. The default tag value 4294967295 (FFFFFFFF in hex) indicates that the tag not specified. |
| IP mscVrIpBgpExportRipInterface | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.7 | IpAddress | read-write | This key attribute specifies the local RIP interface where the routes are learned from. The ripInterface attribute when non-zero should be equal to one of the IP addresses provisioned as a logicalIf component under IpPort. Otherwise, this policy will be ignored. The value of the protocol attribute must be set to rip if a value for the ripInterface attribute is non-zero. |
| IP mscVrIpBgpExportRipNeighbor | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.8 | IpAddress | read-write | This key attribute specifies the RIP neighbor where the routes were learned from. The value of the protocol attribute must be set to rip if a value for the ripNeighbor attribute is non-zero. |
| INT mscVrIpBgpExportAdvertiseStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.9 | INTEGER | read-write | This attribute specifies whether data will be exported if it meets criteria specified by the other key attributes of this component. |
| U32 mscVrIpBgpExportMultiExitDisc | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.10 | Unsigned32 | read-write | This attribute specifies this Bgp component instance's metric to discriminate between multiple exit points to an adjacent autonomous system if the route meets the criteria specified by the key attributes of this component. A lower value indicates a more preferred route. A value of 0 for this attribute means the default MED value provisioned under the Bgp component should be used. |
| INT mscVrIpBgpExportSendMultiExitDiscToEbgp | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.11 | INTEGER | read-write | This attribute specifies whether the Multi Exit Discriminator(MED) attribute should be included in an update message sent to an EBGP peer. |
| STR mscVrIpBgpExportAsPathExpression | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.12 | AsciiString | read-write | This key attribute allows the user to enter a regular expression to match the import AS Path Attribute of the export update message. Note: the AS Path Attribute lists the ASs in reverse traversal order. The syntax of the regular expression is a subset of the RFC 2280. The basic syntax of a regular expression is a list of AS number separated by a space which making up a AS path. The following characters has the special meaning: '.' - Matches any AS number. '^n' - Matches the first AS item (n) in the AS Path Attribute, or in order words, matches the last AS (n) traversed in the AS path. 'n$' - Matches the last AS item (n) in the AS Path Attribute, or in order words, matches the first AS (n) traversed in the AS path. '[n1 ... n2]' - Matches any AS number that appeared in the set n1 ... n2. 'n1 - n2' - Matches any AS number between the range of n1 and n2. '()' - is supported to change the order of evaluation. 'n*' - Matches 0 or more occurrences of n, where n can be a set, range or AS number. 'n+' - Matches 1 or more occurrences of n, where n can be a set, range or AS number. 'n?' - Matches 0 or 1 occurrences of n, where n can be a set, range or number. The following logical operators are evaluated in decending order: 'NOT' - Given a regular expression x, NOT x matches the AS number pattern that is not matched by x. 'AND' - Given two regular expressions x and y, x AND y matches the intersection of the AS path that are matched by x and those are matched by y. 'OR' - Given two regular expressions x and y, x OR y matches the union of the AS path that are matched by x and those are matched by y. For example: The AS path '5 4 3 2 1', where 1 is the origin AS, would be match by any one of the following regular expressions: 1$, ^5, 4 3, 5 3 - 4*, 5 [4 3 2] not10 2 1, not (6 7 8 9 10) and 5 4 .* 1 Empty regular expression implies a match on all AS path. |
| STR mscVrIpBgpExportCommunityExpression | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.13 | AsciiString | read-write | This key attribute allows the user to enter a regular expression to match the import Community Attribute of the received update message. The syntax of the regular expression is a subset of the RFC 2280. The basic syntax of a regular expression is a list of Community number seperated by a space which making up a Community attribute. The following characters has the special meaning: '[n1 ... n2]' - Matches any Community number that appeared in the set n1 ... n2. 'n1 - n2' - Matches any Community number between the range of n1 and n2. '()' - is supported to change the order of evaluation. 'n*' - Matches 0 or more occurrences of n, where n can be a set, range or Community number. 'n+' - Matches 1 or more occurrences of n, where n can be a set, range or Community number. 'n?' - Matches 0 or 1 occurrences of n, where n can be a set, range or number. The following logical operators are evaluated in decending order: 'NOT' - Given a regular expression x, NOT x matches the Community attribute that is not matched by x. 'AND' - Given two regular expressions x and y, x AND y matches the intersection of the Community attribute that are matched by x and those are matched by y. 'OR' - Given two regular expressions x and y, x OR y matches the union of the Community attribute that are matched by x and those are matched by y. For example: The Community path '1 2 3 4 5' would be match by any one of the following regular expression: 1, 5, 4 3, 2 3 - 4*, 1 [3 4 2]+, not (6 7 8 9 10) and 1 2 Empty regular expression implies a match on all Community path. |
| U32 mscVrIpBgpExportExpressPreference | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.14 | Unsigned32 | read-write | This attribute specifies the relative preference of the policy which use the keys expressAsPath and expressCommunity. This attribute is ignored if attributes expressAsPath and expressCommunity are both empty. This attribute is used to break the tie when two export policies' expression attributes match a specific AS Path or Community. A higher value indicates a more preferred policy. |
| U32 mscVrIpBgpExportSendCommunity | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.15 | Unsigned32 | read-write | This attribute indicates which community number this Export policy will send along with the Path Attribute. Refer to RFC 1997 for the detailed description of how this attribute may be used to pass additional information to BGP peers. If the value is set to 0, no community is added to the Community attribute. |
| NUM mscVrIpBgpExportInsertDummyAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.200 | IntegerSequence | read-write | This attribute specifies the AS number(s) to be inserted into the AS Path Attribute. The value is a seuence of AS number seperated by period(.). For example, if the value is 20.20.30, the AS numbers 20, 20 and 30 would be inserted at the end of the AS Path Attribute just before the local AS number. |
| mscVrIpBgpAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.5 | |||
| mscVrIpBgpAsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpAs components. | |
| mscVrIpBgpAsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpAs component. | |
| ROW mscVrIpBgpAsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpAs components. These components can be added and deleted. |
| STR mscVrIpBgpAsComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpAsStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpAs tables. |
| I32 mscVrIpBgpAsIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpBgpAs tables. |
| mscVrIpBgpAsProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.10 | not-accessible | This group contains the attributes associated to each autonomous system for this Bgp component instance. | |
| mscVrIpBgpAsProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.10.1 | not-accessible | An entry in the mscVrIpBgpAsProvTable. | |
| U32 mscVrIpBgpAsWeight | 1.3.6.1.4.1.562.36.2.1.100.6.21.5.10.1.1 | Unsigned32 | read-write | This attribute specifies the weight for an autonomous system. It allows users to prefer some ASes over others. It is used in route selection. Lowest weight is preferred. Setting the weight of an AS to 255 will make any route that traverses through that AS unpreferred. |
| mscVrIpBgpAggregate | 1.3.6.1.4.1.562.36.2.1.100.6.21.6 | |||
| mscVrIpBgpAggregateRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpAggregate components. | |
| mscVrIpBgpAggregateRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpAggregate component. | |
| ROW mscVrIpBgpAggregateRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpAggregate components. These components can be added and deleted. |
| STR mscVrIpBgpAggregateComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpAggregateStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpAggregate tables. |
| IP mscVrIpBgpAggregatePrefixIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpBgpAggregate tables. |
| I32 mscVrIpBgpAggregateLengthIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpBgpAggregate tables. |
| mscVrIpBgpAggregateNet | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2 | |||
| mscVrIpBgpAggregateNetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBgpAggregateNet components. | |
| mscVrIpBgpAggregateNetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpAggregateNet component. | |
| ROW mscVrIpBgpAggregateNetRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBgpAggregateNet components. These components can be added and deleted. |
| STR mscVrIpBgpAggregateNetComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpAggregateNetStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpAggregateNet tables. |
| I32 mscVrIpBgpAggregateNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpBgpAggregateNet tables. |
| mscVrIpBgpAggregateNetProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10 | not-accessible | This group contains the set of provisionable attributes for the Network component. | |
| mscVrIpBgpAggregateNetProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1 | not-accessible | An entry in the mscVrIpBgpAggregateNetProvTable. | |
| IP mscVrIpBgpAggregateNetPrefix | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.1 | IpAddress | read-write | This attribute specifies the network prefix whose length is determined by the length attribute under the same Network component. |
| U32 mscVrIpBgpAggregateNetLength | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.2 | Unsigned32 | read-write | This attribute specifies the length of the network prefix. |
| INT mscVrIpBgpAggregateNetProtocol | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.3 | INTEGER | read-write | This attribute specifies the IP protocols to which this route should belong. |
| U32 mscVrIpBgpAggregateNetEgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.4 | Unsigned32 | read-write | This attribute specifies an EGP autonomous system number. When this value is non-zero, the protocol attribute must be set to either egp or to all. And this more specific route will be advertised together with the aggregated route only if it is learned through egp and this attribute matches the EGP autonomous system number where the network is learned from. The default value 0 indicates that the EGP autonomous system number is not specified. |
| U32 mscVrIpBgpAggregateNetBgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.5 | Unsigned32 | read-write | This attribute specifies the BGP autonomous system number. When this value is non-zero, the protocol attribute must be set to either bgp or to all. And this more specific route will be advertised together with the aggregated route only if it is learned through BGP and this attribute matches the BGP autonomous system number where the network is learned from. The default value 0 indicates that the BGP autonomous system number is not specified. |
| HEX mscVrIpBgpAggregateNetOspfTag | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.6 | Hex | read-write | This attribute specifies the OSPF tag. When this attribute is set to a value other than the default value FFFFFFFF in hex, the protocol attribute must be set to either ospf or to all. And this more specific route will be advertised together with the aggregated route only if its OSPF tag matches this value. The default tag value 4294967295 (FFFFFFFF in hex) indicates that the tag is not specified. |
| IP mscVrIpBgpAggregateNetRipInterface | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.7 | IpAddress | read-write | This attribute specifies a local RIP interface which should be equal to one of the IP addresses provisioned as a logicalIf component under IpPort. When this value is non-zero, the value of the protocol attribute must be either set to rip or to all. And this more specific route will be advertised together with the aggregated route only if it is learned through RIP and this RIP interface. The default value 0.0.0.0 indicates that the RIP interface is not specified. |
| INT mscVrIpBgpAggregateNetAction | 1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.8 | INTEGER | read-write | This attribute specifies whether this network should be aggregated or advertised out. |
| mscVrIpBgpIndb | 1.3.6.1.4.1.562.36.2.1.100.6.21.7 | |||
| mscVrIpBgpIndbRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpBgpIndb components. | |
| mscVrIpBgpIndbRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpIndb component. | |
| ROW mscVrIpBgpIndbRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpBgpIndb components. These components cannot be added nor deleted. |
| STR mscVrIpBgpIndbComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpIndbStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpIndb tables. |
| IP mscVrIpBgpIndbPrefixIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpBgpIndb tables. |
| I32 mscVrIpBgpIndbLengthIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpBgpIndb tables. |
| IP mscVrIpBgpIndbPeerIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.12 | IpAddress | not-accessible | This variable represents an index for the mscVrIpBgpIndb tables. |
| mscVrIpBgpIndbOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all the operational attributes of the IndbEntry component. | |
| mscVrIpBgpIndbOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1 | not-accessible | An entry in the mscVrIpBgpIndbOperTable. | |
| INT mscVrIpBgpIndbOrigin | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.4 | INTEGER | read-only | This attribute indicates the ultimate origin of the path information. A value of incomplete means this information is not available. |
| INT mscVrIpBgpIndbInLocaldb | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.5 | INTEGER | read-only | This attribute indicates whether or not this route was chosen as the best BGP4 route. |
| IP mscVrIpBgpIndbNextHop | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.6 | IpAddress | read-only | This attribute indicates the IP address of the border router that should be used as the next hop for the destination network. |
| U32 mscVrIpBgpIndbLocalPreference | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.7 | Unsigned32 | read-only | This attribute indicates our IBGP peer's degree of preference for an advertised route. A higher value indicates a more preferred route. |
| U32 mscVrIpBgpIndbCalcLocalPref | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.8 | Unsigned32 | read-only | This attribute indicates our degree of preference for this route. A higher value indicates a more preferred route. |
| U32 mscVrIpBgpIndbMultiExitDiscriminator | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.9 | Unsigned32 | read-only | This attribute indicates a metric used to discriminate between multiple exit points to the same adjacent autonomous system. A lower value indicates a more preferred route. |
| INT mscVrIpBgpIndbAtomicAggregate | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.10 | INTEGER | read-only | This attribute indicates whether or not the local system has selected a less specific route without selecting a more specific route. |
| U32 mscVrIpBgpIndbAggregatorAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.11 | Unsigned32 | read-only | This attribute indicates the AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. |
| IP mscVrIpBgpIndbAggregatorAddr | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.12 | IpAddress | read-only | This attribute indicates the IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| STR mscVrIpBgpIndbAsPath | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.13 | AsciiString | read-only | This attribute indicates the sequence of AS path segments. The AS Path Attribute lists the ASs in reverse traversal order. |
| STR mscVrIpBgpIndbUnknownAttributes | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.14 | AsciiString | read-only | This attribute indicates all the path attributes not understood by this Bgp component instance. |
| STR mscVrIpBgpIndbCommunityPath | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.15 | AsciiString | read-only | This attribute indicates the Community path attribute. |
| IP mscVrIpBgpIndbAsOriginatorId | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.16 | IpAddress | read-only | This attribute is associated with the Route Reflector. It indicates the router-id of the originator in the local AS. A value of 0.0.0.0 indicates this attribute is not present in the learned IBGP route or if this Bgp instance is not a Route Reflector. |
| mscVrIpBgpIndbRrClusterListTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.798 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates a sequence of cluster-ids that the route has traversed. A blank list indicates this attribute is not present in the learned IBGP route or if this Bgp instance is not a Route Reflector. | |
| mscVrIpBgpIndbRrClusterListEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.798.1 | not-accessible | An entry in the mscVrIpBgpIndbRrClusterListTable. | |
| IP mscVrIpBgpIndbRrClusterListValue | 1.3.6.1.4.1.562.36.2.1.100.6.21.7.798.1.1 | IpAddress | read-only | This variable represents both the value and the index for the mscVrIpBgpIndbRrClusterListTable. |
| mscVrIpBgpLocaldb | 1.3.6.1.4.1.562.36.2.1.100.6.21.8 | |||
| mscVrIpBgpLocaldbRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpBgpLocaldb components. | |
| mscVrIpBgpLocaldbRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpLocaldb component. | |
| ROW mscVrIpBgpLocaldbRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpBgpLocaldb components. These components cannot be added nor deleted. |
| STR mscVrIpBgpLocaldbComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpLocaldbStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpLocaldb tables. |
| IP mscVrIpBgpLocaldbPrefixIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpBgpLocaldb tables. |
| I32 mscVrIpBgpLocaldbLengthIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpBgpLocaldb tables. |
| IP mscVrIpBgpLocaldbPeerIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.12 | IpAddress | not-accessible | This variable represents an index for the mscVrIpBgpLocaldb tables. |
| mscVrIpBgpLocaldbOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all the operational attributes of the LocaldbEntry component. | |
| mscVrIpBgpLocaldbOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1 | not-accessible | An entry in the mscVrIpBgpLocaldbOperTable. | |
| INT mscVrIpBgpLocaldbOrigin | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.4 | INTEGER | read-only | This attribute indicates the ultimate origin of the path information. A value of incomplete means this information is not available. |
| IP mscVrIpBgpLocaldbNextHop | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.5 | IpAddress | read-only | This attribute indicates the IP address of the border router that should be used as the next hop for the destination network. |
| U32 mscVrIpBgpLocaldbLocalPreference | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.6 | Unsigned32 | read-only | This attribute indicates our IBGP peer's degree of preference for an advertised route. A higher value indicates a more preferred route. |
| U32 mscVrIpBgpLocaldbMultiExitDiscriminator | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.7 | Unsigned32 | read-only | This attribute indicates a metric used to discriminate between multiple exit points to the same adjacent autonomous system. A lower value indicates a more preferred route. |
| INT mscVrIpBgpLocaldbAtomicAggregate | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.8 | INTEGER | read-only | This attribute indicates whether or not the local system has selected a less specific route without selecting a more specific route. |
| U32 mscVrIpBgpLocaldbAggregatorAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.9 | Unsigned32 | read-only | This attribute indicates the AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. |
| IP mscVrIpBgpLocaldbAggregatorAddr | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.10 | IpAddress | read-only | This attribute indicates the IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| STR mscVrIpBgpLocaldbAsPath | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.11 | AsciiString | read-only | This attribute indicates the sequence of AS path segments. The AS Path Attribute lists the ASs in reverse traversal order. |
| STR mscVrIpBgpLocaldbUnknownAttributes | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.12 | AsciiString | read-only | This attribute indicates all the path attributes not understood by this Bgp component instance. |
| STR mscVrIpBgpLocaldbCommunityPath | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.13 | AsciiString | read-only | This attribute indicates the Community path attribute. |
| IP mscVrIpBgpLocaldbAsOriginatorId | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.14 | IpAddress | read-only | This attribute is associated with the Route Reflector. It indicates the router-id of the originator in the local AS. A value of 0.0.0.0 indicates this attribute is not present in the learned IBGP route or if this Bgp instance is not a Route Reflector. |
| mscVrIpBgpLocaldbRrClusterListTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.797 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates a sequence of cluster-ids that the route has traversed. A blank list indicates this attribute is not present in the learned IBGP route or if this Bgp instance is not a Route Reflector. | |
| mscVrIpBgpLocaldbRrClusterListEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.797.1 | not-accessible | An entry in the mscVrIpBgpLocaldbRrClusterListTable. | |
| IP mscVrIpBgpLocaldbRrClusterListValue | 1.3.6.1.4.1.562.36.2.1.100.6.21.8.797.1.1 | IpAddress | read-only | This variable represents both the value and the index for the mscVrIpBgpLocaldbRrClusterListTable. |
| mscVrIpBgpOutdb | 1.3.6.1.4.1.562.36.2.1.100.6.21.9 | |||
| mscVrIpBgpOutdbRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpBgpOutdb components. | |
| mscVrIpBgpOutdbRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBgpOutdb component. | |
| ROW mscVrIpBgpOutdbRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpBgpOutdb components. These components cannot be added nor deleted. |
| STR mscVrIpBgpOutdbComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBgpOutdbStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBgpOutdb tables. |
| IP mscVrIpBgpOutdbPrefixIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpBgpOutdb tables. |
| I32 mscVrIpBgpOutdbLengthIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpBgpOutdb tables. |
| IP mscVrIpBgpOutdbPeerIndex | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.12 | IpAddress | not-accessible | This variable represents an index for the mscVrIpBgpOutdb tables. |
| mscVrIpBgpOutdbOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all the operational attributes of the OutdbEntry component. | |
| mscVrIpBgpOutdbOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1 | not-accessible | An entry in the mscVrIpBgpOutdbOperTable. | |
| INT mscVrIpBgpOutdbOrigin | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.4 | INTEGER | read-only | This attribute indicates the ultimate origin of the path information. A value of incomplete means this information is not available. |
| IP mscVrIpBgpOutdbNextHop | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.5 | IpAddress | read-only | This attribute indicates the IP address of the border router that should be used as the next hop for the destination network. |
| U32 mscVrIpBgpOutdbLocalPreference | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.6 | Unsigned32 | read-only | This attribute indicates this Bgp instance's degree of preference for an advertised route. A higher value indicates a more preferred route. |
| U32 mscVrIpBgpOutdbMultiExitDiscriminator | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.7 | Unsigned32 | read-only | This attribute indicates a metric used to discriminate between multiple exit points to the same adjacent autonomous system. A lower value indicates a more preferred route. |
| INT mscVrIpBgpOutdbAtomicAggregate | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.8 | INTEGER | read-only | This attribute indicates whether or not the local system has selected a less specific route without selecting a more specific route. |
| U32 mscVrIpBgpOutdbAggregatorAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.9 | Unsigned32 | read-only | This attribute indicates the AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. |
| IP mscVrIpBgpOutdbAggregatorAddr | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.10 | IpAddress | read-only | This attribute indicates the IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| STR mscVrIpBgpOutdbAsPath | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.11 | AsciiString | read-only | This attribute indicates the sequence of AS path segments. The AS Path Attribute lists the ASs in reverse traversal order. |
| STR mscVrIpBgpOutdbUnknownAttributes | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.12 | AsciiString | read-only | This attribute indicates all the path attributes not understood by this Bgp component instance. |
| STR mscVrIpBgpOutdbCommunityPath | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.13 | AsciiString | read-only | This attribute indicates the Community path attribute. |
| IP mscVrIpBgpOutdbAsOriginatorId | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.14 | IpAddress | read-only | This attribute is associated with the Route Reflector. It indicates the router-id of the originator of a route in the local AS. When the Route Reflector distributes a learned IBGP route to other IBGP speakers, the value of this attribute in the learned route is used if one is present; othewise, the Route Reflector's router-id is used. A value of 0.0.0.0 indicates this Bgp instance is not a Route Reflector. |
| mscVrIpBgpOutdbRrClusterListTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.799 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates a sequence of cluster-ids that the route has traversed. When the Route Reflector redistributes a learned IBGP to other IBGP speakers, the cluster id of this Route Reflector is appended to the cluster list of the learned IBGP route. If this Bgp instance is not a Route Reflector, this attribute is blank. | |
| mscVrIpBgpOutdbRrClusterListEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.799.1 | not-accessible | An entry in the mscVrIpBgpOutdbRrClusterListTable. | |
| IP mscVrIpBgpOutdbRrClusterListValue | 1.3.6.1.4.1.562.36.2.1.100.6.21.9.799.1.1 | IpAddress | read-only | This variable represents both the value and the index for the mscVrIpBgpOutdbRrClusterListTable. |
| mscVrIpBgpProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.100 | not-accessible | This group contains the provisionable attributes for the Bgp component. | |
| mscVrIpBgpProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1 | not-accessible | An entry in the mscVrIpBgpProvTable. | |
| IP mscVrIpBgpBgpIdentifier | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.1 | IpAddress | read-write | This attribute specifies the Bgp Identifier of this Bgp component instance. It is picked from the IP address space, and should follow the same rule as choosing an unique IP address for IpPort. |
| U32 mscVrIpBgpLocalAs | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.2 | Unsigned32 | read-write | This attribute specifies the autonomous system identifier for this Bgp component instance. |
| U32 mscVrIpBgpDefaultLocalPreference | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.3 | Unsigned32 | read-write | This attribute specifies this Bgp component instance's default degree of preference for routes. It can be overridden by the localPreference provisioned in ImportPolicy. A higher value indicates a more preferred route. |
| U32 mscVrIpBgpDefaultMultiExitDisc | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.4 | Unsigned32 | read-write | This attribute specifies this Bgp component instance's default metric to discriminate between multiple exit points to the same adjacent autonomous system. It can be overridden by the sendMultiExitDiscToEbgp provisioned in ExportPolicy. A lower value indicates a more preferred route. |
| U32 mscVrIpBgpRouteThrottleLimit | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.5 | Unsigned32 | read-write | This attribute specifies the maximum number of routes in the IP forwarding table this Bgp component instance will process at one time to decide if a route in the IP forwarding table should be exported to a peer. This limit is used for the throttling and is made configurable because the throttling requirements will be different under different network configurations. The default value is 250. |
| U32 mscVrIpBgpRouteThrottleInter | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.6 | Unsigned32 | read-write | This attribute specifies the interval in seconds, between the processing of the routes in the IP forwarding table to decide if a route in the IP forwarding table should be exported to a peer. This interval is used for the throttling and is made configurable because the throttling requirements will be different under different network configurations. The default value is 5 seconds. |
| INT mscVrIpBgpRouteReflector | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.7 | INTEGER | read-write | This attribute specifies whether this Bgp instance is a Route Reflector. If the value of this attribute is true, Bgp redistributes routes it learns from an IBGP speaker to other IBGP speakers in the AS. The rule of redistribution depends on the peer type: 1) When a route is learned from a non-client peer, it is redistributed to all the client peers within the cluster. 2) When a route is learned from a client peer, it is redistributed to all the non-client peers and also to the client peers. If the value of this attribute is false, Bgp does not redistribute routes it learns from one IBGP speaker to other IBGP speakers in the AS. |
| IP mscVrIpBgpRouteReflectorCluster | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.8 | IpAddress | read-write | This attribute identifies the cluster consisting of the Route Reflector and its peer clients. When routeReflector of Bgp is true, value of 0.0.0.0 or 255.255.255.255 is invalid; the default value of this attribute is same as bgpIdentifier. For redundancy, a cluster may have more than one Route Reflector; in this case, the value of this attribute of all the Route Reflectors in the same cluster should be same. The value of this attribute is ignored when routeReflector of Bgp is false |
| INT mscVrIpBgpRedistributeIgpToIbgp | 1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.9 | INTEGER | read-write | This attribute specifies whether this Bgp instance allows exporting of IGP routes to internal Bgp peers. IGP routes include the routes learned from OSPF, RIP, local routes and static routes. If the value of this attribute is true, and if ExportPolicy is specified to distribute, then Bgp allows IGP route to be distributed to internal Bgp peers. If the value of this attribute is false, Bgp does not allow IGP routes to be distributed to internal Bgp peer, even if ExportPolicy is specified to distribute. This attribute is set to true if and only this Bgp is part of the Carrier Manage Service, otherwise, a routing loop may result. |
| mscVrIpBgpOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.101 | not-accessible | This group contains the operational attributes for the Bgp component. | |
| mscVrIpBgpOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1 | not-accessible | An entry in the mscVrIpBgpOperTable. | |
| C32 mscVrIpBgpTableVersion | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.2 | Counter32 | read-only | This attribute indicates the version of the BGP routing table. It is incremented every time the BGP routing table changes. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpInMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.3 | Counter32 | read-only | This attribute counts the total number of BGP messages received without error. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpInErrors | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.4 | Counter32 | read-only | This attribute counts the total number of BGP messages received from all peers that proved to be in error. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpInErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.5 | Counter32 | read-only | This attribute counts the total number of BGP NOTIFICATION messages from all the peers. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpOutMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.6 | Counter32 | read-only | This attribute counts the total number of BGP messages sent to peers. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpOutDiscards | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.7 | Counter32 | read-only | This attribute counts the number of BGP messages that were locally generated but were not sent out due to resource limitations within a Bgp instance. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpOutErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.8 | Counter32 | read-only | This attribute counts the BGP NOTIFICATION messages sent to the peers. This counter will wrap to zero once the value exceeds the maximum value. |
| C32 mscVrIpBgpIndbSize | 1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.9 | Counter32 | read-only | This attribute indicates the number of Bgp indb entries under this Bgp component instance. |
| mscVrIpBgpStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.102 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpBgpStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.102.1 | not-accessible | An entry in the mscVrIpBgpStateTable. | |
| INT mscVrIpBgpAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.21.102.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpBgpOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.21.102.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpBgpUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.21.102.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpBgpAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.103 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| mscVrIpBgpAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.103.1 | not-accessible | An entry in the mscVrIpBgpAdminControlTable. | |
| INT mscVrIpBgpSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.103.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| mscVrIpBgpOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.21.106 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrIpBgpOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.21.106.1 | not-accessible | An entry in the mscVrIpBgpOperStatusTable. | |
| INT mscVrIpBgpSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.6.21.106.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| bgpMIB | 1.3.6.1.4.1.562.36.2.2.141 | |||
| bgpGroup | 1.3.6.1.4.1.562.36.2.2.141.1 | |||
| bgpGroupCA | 1.3.6.1.4.1.562.36.2.2.141.1.1 | |||
| bgpGroupCA02 | 1.3.6.1.4.1.562.36.2.2.141.1.1.3 | |||
| bgpGroupCA02A | 1.3.6.1.4.1.562.36.2.2.141.1.1.3.2 | |||
| bgpCapabilities | 1.3.6.1.4.1.562.36.2.2.141.3 | |||
| bgpCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.141.3.1 | |||
| bgpCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.141.3.1.3 | |||
| bgpCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.141.3.1.3.2 |
RFC description
Border Gateway Protocol (BGP) management for Nortel MscPassport. Configures and monitors BGP routing for IP networks.
Start monitoring Nortel MsCarrier MscPassport switch/router (BGP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.