All MIBs › Nortel-MsCarrier-MscPassport-VirtualRouterMIB
Category: Nortel Passport WAN
Description: Manages virtual router instances, routing tables, and IP interface assignment on Nortel MsCarrier Passport nodes.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-MsCarrier-MscPassport-VirtualRouterMIB?
This MIB manages virtual router (VR) instances on Nortel's (later Alcatel-Lucent) MsCarrier Passport multiservice switching platform, a carrier-grade routing/switching product line. Categories exposed include VR provisioning/configuration (row creation and lifecycle state), SNMP management access control per VR, and VPN/intranet identifier binding for each virtual router. It emphasizes monitoring the software-defined status of each VR instance — whether it is active, being created, or being destroyed, and whether SNMP management is enabled for it — functioning as a health/provisioning check on the Passport's virtualized routing layer rather than physical sensors. It relies on standard SNMPv2-TC constructs such as RowStatus and StorageType to model VR lifecycle, alongside Passport's own chassis/routing MIBs for underlying context. It is deployed on carrier-grade Nortel/Alcatel-Lucent Passport 15000/20000-series nodes providing multi-tenant virtual routing and VPN services. Browsing the Nortel-MsCarrier-MscPassport-VirtualRouterMIB OID tree directly is often the quickest way for an operator to confirm exactly which mscVr objects a given Passport software release actually implements.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-VirtualRouterMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel/Alcatel-Lucent MsCarrier Passport multiservice switch
- carrier routing/VPN platform
Monitoring Examples
An admin would walk mscVrRowStatusTable indexed by mscVrIndex to see which virtual router instances exist and their mscVrRowStatus (active, notInService, createAndGo), revealing whether a customer's VR was successfully provisioned or is stuck mid-creation. Polling mscVrAdminContorlTable's mscVrSnmpAdminStatus and mscVrManagementAccess shows whether SNMP-based management is enabled for a given VR, useful for diagnosing why it isn't responding to management traffic. mscVrVirtualPrivateIntranetIdentifier ties a VR instance to its VPN/intranet identifier, letting an operator confirm the virtual router is bound to the correct customer VPN. A VR row stuck in a transitional mscVrRowStatus or an unexpected mscVrStorageType would indicate a provisioning failure on the Passport node.
What Can Be Monitored
- virtual router provisioning/row status
- SNMP management access per virtual router
- VPN/intranet identifier binding
- virtual router storage type
This MIB depends on
Related MIBs
Imported Objects
From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
| Counter32 | |
| DisplayString | |
| Gauge32 | |
| Integer32 | |
| InterfaceIndex | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-MsCarrier-MscPassport-TextualConventionsMIB
| AsciiString | |
| AsciiStringIndex | |
| HexString | |
| IntegerSequence | |
| Link | |
| NonReplicated |
From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
| mscComponents | OBJECT-IDENTITY |
| mscPassportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mscVr | 1.3.6.1.4.1.562.36.2.1.100 | |||
| mscVrAdminContorlEntry | 1.3.6.1.4.1.562.36.2.1.100.100.1 | not-accessible | An entry in the mscVrAdminContorlTable. | |
| mscVrAdminContorlTable | 1.3.6.1.4.1.562.36.2.1.100.100 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| INT mscVrAdminState | 1.3.6.1.4.1.562.36.2.1.100.104.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| mscVrCidDataEntry | 1.3.6.1.4.1.562.36.2.1.100.101.1 | not-accessible | An entry in the mscVrCidDataTable. | |
| mscVrCidDataTable | 1.3.6.1.4.1.562.36.2.1.100.101 | not-accessible | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. | |
| STR mscVrComponentName | 1.3.6.1.4.1.562.36.2.1.100.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 mscVrCustomerIdentifier | 1.3.6.1.4.1.562.36.2.1.100.101.1.1 | Unsigned32 | read-write | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers. |
| U32 mscVrIfNumber | 1.3.6.1.4.1.562.36.2.1.100.105.1.1 | Unsigned32 | read-only | This attribute defines the number of IfEntries in the IfTable. |
| mscVrIfNumberOperEntry | 1.3.6.1.4.1.562.36.2.1.100.105.1 | not-accessible | An entry in the mscVrIfNumberOperTable. | |
| mscVrIfNumberOperTable | 1.3.6.1.4.1.562.36.2.1.100.105 | not-accessible | This group contains the ifNumber attribute. | |
| mscVrIfTableEntry | 1.3.6.1.4.1.562.36.2.1.100.10 | |||
| mscVrIfTableEntryAdditionalInfoEntry | 1.3.6.1.4.1.562.36.2.1.100.10.11.1 | not-accessible | An entry in the mscVrIfTableEntryAdditionalInfoTable. | |
| mscVrIfTableEntryAdditionalInfoTable | 1.3.6.1.4.1.562.36.2.1.100.10.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains additional information associated with this ifEntry. | |
| STR mscVrIfTableEntryComponentName | 1.3.6.1.4.1.562.36.2.1.100.10.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| INT mscVrIfTableEntryIfAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.2 | INTEGER | read-only | The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed. |
| STR mscVrIfTableEntryIfDescription | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.17 | AsciiString | read-only | A textual string containing information about the interface. This string includes the name of the manufacturer, the product name and the version of the hardware interface. |
| C32 mscVrIfTableEntryIfInDiscards | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.7 | Counter32 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 mscVrIfTableEntryIfInErrors | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.9 | Counter32 | read-only | The number of inbound packet that contained errors preventing them from being deliverable to a higher layer protocol. |
| C32 mscVrIfTableEntryIfInNuCastPkts | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.13 | Counter32 | read-only | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| C32 mscVrIfTableEntryIfInOctets | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.5 | Counter32 | read-only | The total number of octets received on the interface, including framing characters. |
| C32 mscVrIfTableEntryIfInUcastPkts | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.11 | Counter32 | read-only | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| C32 mscVrIfTableEntryIfInUnknownProtos | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.15 | Counter32 | read-only | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| U32 mscVrIfTableEntryIfLastChange | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.4 | Unsigned32 | read-only | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. |
| U32 mscVrIfTableEntryIfMtu | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.19 | Unsigned32 | read-only | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. |
| INT mscVrIfTableEntryIfOperStatus | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.3 | INTEGER | read-only | This attribute provides the current operational status of the interface. The testing state indicates that no operational packets can be passed. |
| C32 mscVrIfTableEntryIfOutDiscards | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.8 | Counter32 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 mscVrIfTableEntryIfOutErrors | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.10 | Counter32 | read-only | The number of outbound packets that could not be transmitted because of errors. |
| C32 mscVrIfTableEntryIfOutNuCastPkts | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.14 | Counter32 | read-only | The total number of packets that higher level protocols request be transmitted to a non-unicast address, including those that were discarded or not sent. |
| C32 mscVrIfTableEntryIfOutOctets | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.6 | Counter32 | read-only | The total number of octets transmitted out the interface, including framing characters |
| G32 mscVrIfTableEntryIfOutQlength | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.16 | Gauge32 | read-only | The length of the output packet queue (in packets) |
| C32 mscVrIfTableEntryIfOutUcastPkts | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.12 | Counter32 | read-only | The total number of packets that higher level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. |
| STR mscVrIfTableEntryIfPhysicalAddress | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.21 | AsciiString | read-only | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should be an octet string of zero length. |
| NUM mscVrIfTableEntryIfSpecific | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.22 | IntegerSequence | read-only | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER 0.0, which is a syntactically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value. |
| U32 mscVrIfTableEntryIfSpeed | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.20 | Unsigned32 | read-only | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. |
| mscVrIfTableEntryIftEntry | 1.3.6.1.4.1.562.36.2.1.100.10.10.1 | not-accessible | An entry in the mscVrIfTableEntryIftTable. | |
| mscVrIfTableEntryIftTable | 1.3.6.1.4.1.562.36.2.1.100.10.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents the SNMP interface table entry. | |
| INT mscVrIfTableEntryIfType | 1.3.6.1.4.1.562.36.2.1.100.10.10.1.18 | INTEGER | read-only | The type of interface, distinguished according to the physical/link protocol(s) immediately below the network layer in the protocol stack |
| I32 mscVrIfTableEntryIndex | 1.3.6.1.4.1.562.36.2.1.100.10.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIfTableEntry tables. |
| ROW mscVrIfTableEntryRowStatus | 1.3.6.1.4.1.562.36.2.1.100.10.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIfTableEntry components. These components cannot be added nor deleted. |
| mscVrIfTableEntryRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.10.1.1 | not-accessible | A single entry in the table represents a single mscVrIfTableEntry component. | |
| mscVrIfTableEntryRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.10.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIfTableEntry components. | |
| NUM mscVrIfTableEntryStdComponentName | 1.3.6.1.4.1.562.36.2.1.100.10.11.1.1 | RowPointer | read-only | This attribute provides a component name associated with this ifEntry. This component is the source of the data stored in this entry. More data may be determined about this entry by looking at the component associated with this component name. |
| STO mscVrIfTableEntryStorageType | 1.3.6.1.4.1.562.36.2.1.100.10.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIfTableEntry tables. |
| STR mscVrIndex | 1.3.6.1.4.1.562.36.2.1.100.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscVr tables. |
| INT mscVrManagementAccess | 1.3.6.1.4.1.562.36.2.1.100.100.1.2 | INTEGER | read-write | This attributes defines the routing capabilities of this Virtual Router and controls the TCP access into that Vr. External access is only permitted through the Vr that has this attribute enabled. The attribute allows the following subcomponents to be provisioned: Ipx, Bridging, Sna, Sres, NetSentry, and Snmp. Exactly one Vr must have this attribute enabled. The first provisioned Vr will have the attribute enabled by default. Subsequent Vrs will have the attribute disabled. |
| mscVrMm | 1.3.6.1.4.1.562.36.2.1.100.2 | |||
| U32 mscVrMmBridgingHeapSpaceAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.7 | Unsigned32 | read-only | The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's Bridging. |
| U32 mscVrMmBridgingMaxHeapSpace | 1.3.6.1.4.1.562.36.2.1.100.2.10.1.6 | Unsigned32 | read-write | The maximum percentage of this VR's dynamic memory which can be allocated to this VR's Bridging. An attempt to allocate memory in excess of this limit forces Bridging to shut down. |
| STR mscVrMmComponentName | 1.3.6.1.4.1.562.36.2.1.100.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NON mscVrMmIndex | 1.3.6.1.4.1.562.36.2.1.100.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrMm tables. |
| U32 mscVrMmIpHeapSpaceAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.3 | Unsigned32 | read-only | The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's IP. |
| U32 mscVrMmIpMaxHeapSpace | 1.3.6.1.4.1.562.36.2.1.100.2.10.1.2 | Unsigned32 | read-write | The maximum percentage of this VR's dynamic memory which can be allocated to this VR's IP. An attempt to allocate memory in excess of this limit forces IP to shut down. |
| U32 mscVrMmIpxHeapSpaceAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.4 | Unsigned32 | read-only | The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's IPX. |
| U32 mscVrMmIpxMaxHeapSpace | 1.3.6.1.4.1.562.36.2.1.100.2.10.1.3 | Unsigned32 | read-write | The maximum percentage of this VR's dynamic memory which can be allocated to this VR's IPX. An attempt to allocate memory in excess of this limit forces IPX to shut down. |
| U32 mscVrMmNetSentryHeapSpaceAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.8 | Unsigned32 | read-only | The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's NetSentry. |
| U32 mscVrMmNetSentryMaxHeapSpace | 1.3.6.1.4.1.562.36.2.1.100.2.10.1.7 | Unsigned32 | read-write | The maximum percentage of this VR's dynamic memory which can be allocated to this VR's NetSentry. An attempt to allocate memory in excess of this limit forces NetSentry to shut down. |
| mscVrMmOperEntry | 1.3.6.1.4.1.562.36.2.1.100.2.11.1 | not-accessible | An entry in the mscVrMmOperTable. | |
| mscVrMmOperTable | 1.3.6.1.4.1.562.36.2.1.100.2.11 | not-accessible | The group includes all operational attributes for the MemoryManagement component. | |
| mscVrMmProvEntry | 1.3.6.1.4.1.562.36.2.1.100.2.10.1 | not-accessible | An entry in the mscVrMmProvTable. | |
| mscVrMmProvTable | 1.3.6.1.4.1.562.36.2.1.100.2.10 | not-accessible | The group includes all provisioned attributes for the MemoryManagement component. | |
| ROW mscVrMmRowStatus | 1.3.6.1.4.1.562.36.2.1.100.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrMm components. These components cannot be added nor deleted. |
| mscVrMmRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.2.1.1 | not-accessible | A single entry in the table represents a single mscVrMm component. | |
| mscVrMmRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.2.1 | not-accessible | This entry controls the addition and deletion of mscVrMm components. | |
| U32 mscVrMmSnaHeapSpaceAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.10 | Unsigned32 | read-only | The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's SNA. |
| U32 mscVrMmSnaMaxHeapSpace | 1.3.6.1.4.1.562.36.2.1.100.2.10.1.9 | Unsigned32 | read-write | The maximum percentage of this VR's dynamic memory which can be allocated to this VR's SNA. An attempt to allocate memory in excess of this limit forces SNA to shut down. |
| U32 mscVrMmSresHeapSpaceAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.9 | Unsigned32 | read-only | The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's Source Route End Station. |
| U32 mscVrMmSresMaxHeapSpace | 1.3.6.1.4.1.562.36.2.1.100.2.10.1.8 | Unsigned32 | read-write | The maximum percentage of this VR's dynamic memory which can be allocated to this VR's SourceRouteEndStation. An attempt to allocate memory in excess of this limit forces SourceRouteEndStation to shut down. |
| STO mscVrMmStorageType | 1.3.6.1.4.1.562.36.2.1.100.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrMm tables. |
| U32 mscVrMmVrHeapSpaceAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.2 | Unsigned32 | read-only | The percentage of system dynamic memory which is currently allocated to this Virtual Router. |
| U32 mscVrMmVrHeapSpaceBytesAllocated | 1.3.6.1.4.1.562.36.2.1.100.2.11.1.1 | Unsigned32 | read-only | The number of bytes of system dynamic memory which has been allocated by this Virtual Router. |
| U32 mscVrMmVrMaxHeapSpace | 1.3.6.1.4.1.562.36.2.1.100.2.10.1.1 | Unsigned32 | read-write | The maximum percentage of the total system heap space that is allowed for use by this Virtual Router. Memory allocation for this VR which attempts to exceed this limit will fail causing a shut down of the requesting process. |
| INT mscVrOperationalState | 1.3.6.1.4.1.562.36.2.1.100.104.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| mscVrOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.103.1 | not-accessible | An entry in the mscVrOperStatusTable. | |
| mscVrOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.103 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrPp | 1.3.6.1.4.1.562.36.2.1.100.3 | |||
| mscVrPpAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.3.100.1 | not-accessible | An entry in the mscVrPpAdminControlTable. | |
| mscVrPpAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.3.100 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| INT mscVrPpAdminState | 1.3.6.1.4.1.562.36.2.1.100.3.103.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| STR mscVrPpAtmAddress | 1.3.6.1.4.1.562.36.2.1.100.3.105.1.1 | HexString | read-only | This attribute indicates the ATM address which is associated with this protocol port. NHRP uses this address to establish shortcut connections. This attribute is not displayed if NHRP is not provisioned on this protocol port. |
| STR mscVrPpComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NUM mscVrPpIfIndex | 1.3.6.1.4.1.562.36.2.1.100.3.104.1.1 | InterfaceIndex | read-only | This represents the SNMP ifIndex which is associated with this PP. This ifIndex can be used to extract detailed information about the PP from the ifTable. |
| STR mscVrPpIndex | 1.3.6.1.4.1.562.36.2.1.100.3.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscVrPp tables. |
| LIN mscVrPpLinkToMedia | 1.3.6.1.4.1.562.36.2.1.100.3.101.1.1 | Link | read-write | This attribute defines the Media Application which this Protocol Port is using as an interface to the network. |
| mscVrPpNbmaAddressEntry | 1.3.6.1.4.1.562.36.2.1.100.3.105.1 | not-accessible | An entry in the mscVrPpNbmaAddressTable. | |
| mscVrPpNbmaAddressTable | 1.3.6.1.4.1.562.36.2.1.100.3.105 | not-accessible | This group contains the operational attributes of the ProtocolPort component specific to NHRP. | |
| INT mscVrPpOperationalState | 1.3.6.1.4.1.562.36.2.1.100.3.103.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| mscVrPpOperEntry | 1.3.6.1.4.1.562.36.2.1.100.3.104.1 | not-accessible | An entry in the mscVrPpOperTable. | |
| mscVrPpOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.102.1 | not-accessible | An entry in the mscVrPpOperStatusTable. | |
| mscVrPpOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.102 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrPpOperTable | 1.3.6.1.4.1.562.36.2.1.100.3.104 | not-accessible | This group includes operational attributes specific to the ProtocolPort component. | |
| mscVrPpProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.101.1 | not-accessible | An entry in the mscVrPpProvTable. | |
| mscVrPpProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.101 | not-accessible | This group includes provisioned attributes specific to the ProtocolPort component. | |
| ROW mscVrPpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPp components. These components can be added and deleted. |
| mscVrPpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.1.1 | not-accessible | A single entry in the table represents a single mscVrPp component. | |
| mscVrPpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.1 | not-accessible | This entry controls the addition and deletion of mscVrPp components. | |
| INT mscVrPpSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.3.100.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| INT mscVrPpSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.3.102.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrPpStateEntry | 1.3.6.1.4.1.562.36.2.1.100.3.103.1 | not-accessible | An entry in the mscVrPpStateTable. | |
| mscVrPpStateTable | 1.3.6.1.4.1.562.36.2.1.100.3.103 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| STO mscVrPpStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPp tables. |
| INT mscVrPpUsageState | 1.3.6.1.4.1.562.36.2.1.100.3.103.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrQosP | 1.3.6.1.4.1.562.36.2.1.100.15 | |||
| STR mscVrQosPComponentName | 1.3.6.1.4.1.562.36.2.1.100.15.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| I32 mscVrQosPIndex | 1.3.6.1.4.1.562.36.2.1.100.15.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrQosP tables. |
| mscVrQosPProvEntry | 1.3.6.1.4.1.562.36.2.1.100.15.10.1 | not-accessible | An entry in the mscVrQosPProvTable. | |
| mscVrQosPProvTable | 1.3.6.1.4.1.562.36.2.1.100.15.10 | not-accessible | This group includes all attributes that can be provisioned to define an InwQualityofServiceProfile instance. | |
| ROW mscVrQosPRowStatus | 1.3.6.1.4.1.562.36.2.1.100.15.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrQosP components. These components can be added and deleted. |
| mscVrQosPRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.15.1.1 | not-accessible | A single entry in the table represents a single mscVrQosP component. | |
| mscVrQosPRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.15.1 | not-accessible | This entry controls the addition and deletion of mscVrQosP components. | |
| STO mscVrQosPStorageType | 1.3.6.1.4.1.562.36.2.1.100.15.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrQosP tables. |
| U32 mscVrQosPVnsDiscardPriority | 1.3.6.1.4.1.562.36.2.1.100.15.10.1.1 | Unsigned32 | read-write | This attribute specifies the throughput importance of the packets when forwarded over VNS connections. In times of congestion the discard priority of a packet is used to determine whether the packet should be discarded to reduce the heavy traffic load. Packets with lower discard priority (numerically higher vdp) are more likely to be discarded than packets with higher discard priority (numerically lower vdp). Discard priority one (vdp 1) should be used for the most important traffic, whereas discard priority three (vdp 3) should be used for the least important traffic. |
| U32 mscVrQosPVnsEmissionPriority | 1.3.6.1.4.1.562.36.2.1.100.15.10.1.2 | Unsigned32 | read-write | This attribute specifies the delay importance of the packets when forwarded over VNS connections. Packets with higher emission priority (vep 1) are transmitted before packets with lower emission priority (vep 2). Delay sensitive packets should be sent with emission priority one (vep 1). |
| U32 mscVrQosPWanEmissionPriority | 1.3.6.1.4.1.562.36.2.1.100.15.10.1.3 | Unsigned32 | read-write | This attribute specifies the delay importance of the packets when forwarded over WAN connections. Packets with higher emission priority (wep 1) are transmitted before packets with lower emission priority (wep 2). Delay sensitive packets should be sent with emission priority one (wep 1). |
| ROW mscVrRowStatus | 1.3.6.1.4.1.562.36.2.1.100.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVr components. These components can be added and deleted. |
| mscVrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.1.1 | not-accessible | A single entry in the table represents a single mscVr component. | |
| mscVrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.1 | not-accessible | This entry controls the addition and deletion of mscVr components. | |
| INT mscVrSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.100.1.1 | INTEGER | read-write | This sets the desired state of this VirtualRouter. The up state indicates the Vr is operational. The down state indicates the Vr is not operational. The down state is only valid when the managementAccess attribute is disabled. Testing is an invalid state for the Vr. |
| INT mscVrSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.103.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrStateEntry | 1.3.6.1.4.1.562.36.2.1.100.104.1 | not-accessible | An entry in the mscVrStateTable. | |
| mscVrStateTable | 1.3.6.1.4.1.562.36.2.1.100.104 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| STO mscVrStorageType | 1.3.6.1.4.1.562.36.2.1.100.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVr tables. |
| INT mscVrUsageState | 1.3.6.1.4.1.562.36.2.1.100.104.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| INT mscVrVirtualPrivateIntranetIdentifier | 1.3.6.1.4.1.562.36.2.1.100.100.1.3 | INTEGER | read-write | Identifies the Virtual Private Intranet (VPI) associated with this Virtual Router. The vpiId must be unique for each VR on a Passport and each interconnected VR must have the same vpiId. |
| INT mscVrVpnMode | 1.3.6.1.4.1.562.36.2.1.100.100.1.4 | INTEGER | read-write | This attribute specifies if the virtual router behaves as a carrier Virtual Router or a customer Virtual Router. The value should be set to carrier only if this Virtual Router is part of the backbone network of the Virtual Private Networks. |
| virtualRouterCapabilities | 1.3.6.1.4.1.562.36.2.2.26.3 | |||
| virtualRouterCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.26.3.1 | |||
| virtualRouterCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.26.3.1.3 | |||
| virtualRouterCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.26.3.1.3.2 | |||
| virtualRouterGroup | 1.3.6.1.4.1.562.36.2.2.26.1 | |||
| virtualRouterGroupCA | 1.3.6.1.4.1.562.36.2.2.26.1.1 | |||
| virtualRouterGroupCA02 | 1.3.6.1.4.1.562.36.2.2.26.1.1.3 | |||
| virtualRouterGroupCA02A | 1.3.6.1.4.1.562.36.2.2.26.1.1.3.2 | |||
| virtualRouterMIB | 1.3.6.1.4.1.562.36.2.2.26 |
RFC description
Manages virtual routers in Nortel MSC Passport platforms, supporting carrier and customer VPN virtual router configurations and operations.
Start monitoring Nortel/Alcatel-Lucent MsCarrier Passport multiservice switch (virtual router instances) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.