Nortel-MsCarrier-MscPassport-DpnRoutingMIB

All MIBs › Nortel-MsCarrier-MscPassport-DpnRoutingMIB

Category: IP Routing & Forwarding, Nortel MsCarrier MscPassport

Description: Provides SNMP objects for DPN (Data Packet Network) routing protocol configuration on Nortel MsCarrier MscPassport switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-MsCarrier-MscPassport-DpnRoutingMIB?

Nortel-MsCarrier-MscPassport-DpnRoutingMIB provides SNMP objects for DPN (Data Packet Network) routing protocol configuration on Nortel MsCarrier MscPassport switches, covering the internal routing identity and topology assignments used by the legacy DPN packet-switching architecture. It defines row status/provisioning tables for the routing component, including logical network number, routing ID, and module ID assignments, along with a routing-ID (Rid) sub-component. This allows an operator to monitor whether the DPN routing component is provisioned and active and to confirm the switch's routing identity and network-number assignment within the DPN topology, which is primarily configuration-state monitoring but also surfaces whether the routing subsystem is operational. It relies on the Passport RowStatus/StorageType and component-indexing conventions shared across the MIB family, and its concepts are specific to Nortel's proprietary DPN routing architecture rather than a public IETF routing standard. It is used on Nortel MsCarrier MscPassport switches operating within a legacy DPN packet-switched carrier network. Engineers can download the Nortel-MsCarrier-MscPassport-DpnRoutingMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-DpnRoutingMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel MsCarrier MscPassport switch (DPN network)

Monitoring Examples

An operator polls mscRtgDpnRowStatusTable to confirm the DPN routing component is active, then checks mscRtgDpnLogicalNetworkNumber, mscRtgDpnRoutingId, and mscRtgDpnModuleId to verify the switch's assigned network number, routing identity, and module identity within the DPN topology. A mismatch between the configured routing ID and the value expected by the network's topology plan would indicate a provisioning error that could cause routing conflicts. mscRtgDpnRid provides the associated routing-ID sub-component detail.

What Can Be Monitored

routing component status
logical network number
routing ID assignment
module ID assignment

Imported Objects

From Nortel-MsCarrier-MscPassport-BaseRoutingMIB

mscRtg	OBJECT-IDENTITY
mscRtgIndex	OBJECT-TYPE

From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB

DisplayString
Integer32
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-MsCarrier-MscPassport-TextualConventionsMIB

AsciiString
AsciiStringIndex
NonReplicated
PassportCounter64

From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB

mscPassportMIBs

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
mscRtgDpn	1.3.6.1.4.1.562.36.2.1.40.4
mscRtgDpnRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.1		not-accessible	This entry controls the addition and deletion of mscRtgDpn components.
mscRtgDpnRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.1.1		not-accessible	A single entry in the table represents a single mscRtgDpn component.
ROW mscRtgDpnRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpn components. These components cannot be added nor deleted.
STR mscRtgDpnComponentName	1.3.6.1.4.1.562.36.2.1.40.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnStorageType	1.3.6.1.4.1.562.36.2.1.40.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpn tables.
NON mscRtgDpnIndex	1.3.6.1.4.1.562.36.2.1.40.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscRtgDpn tables.
mscRtgDpnRid	1.3.6.1.4.1.562.36.2.1.40.4.2
mscRtgDpnRidRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnRid components.
mscRtgDpnRidRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnRid component.
ROW mscRtgDpnRidRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnRid components. These components cannot be added nor deleted.
STR mscRtgDpnRidComponentName	1.3.6.1.4.1.562.36.2.1.40.4.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnRidStorageType	1.3.6.1.4.1.562.36.2.1.40.4.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnRid tables.
I32 mscRtgDpnRidIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRid tables.
mscRtgDpnRidMid	1.3.6.1.4.1.562.36.2.1.40.4.2.2
mscRtgDpnRidMidRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.2.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnRidMid components.
mscRtgDpnRidMidRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.2.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnRidMid component.
ROW mscRtgDpnRidMidRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnRidMid components. These components cannot be added nor deleted.
STR mscRtgDpnRidMidComponentName	1.3.6.1.4.1.562.36.2.1.40.4.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnRidMidStorageType	1.3.6.1.4.1.562.36.2.1.40.4.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnRidMid tables.
I32 mscRtgDpnRidMidIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidMid tables.
mscRtgDpnRidOperTable	1.3.6.1.4.1.562.36.2.1.40.4.2.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes is maintained by the DpnAddressPlan component to provide information about the RIDs reachable in the network.
mscRtgDpnRidOperEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.10.1		not-accessible	An entry in the mscRtgDpnRidOperTable.
U32 mscRtgDpnRidDpnDelayMetric	1.3.6.1.4.1.562.36.2.1.40.4.2.10.1.1	Unsigned32	read-only	This attribute indicates the minimum DPN delay metric to the destination RID. The delay metric associated with a path is computed by the routing system by translating the smallest delayMetric calculated for the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metric displayed is that of the best path to the destination. This metric is advertised to neighbor RMs and Passports in a different RID subnet. A metric value of 255 means the RID is unreachable in the delay class of service. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID. A metric value of 252 indicates that the destination RID is that of a Network Module (NM).
U32 mscRtgDpnRidDpnTputMetric	1.3.6.1.4.1.562.36.2.1.40.4.2.10.1.2	Unsigned32	read-only	This attribute indicates the minimum DPN throughput metric to the destination RID. The throughput metric associated with a path is computed by the routing system by translating the smallest tputMetric calculated for the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metric displayed is that of the best path to the destination. This metric is advertised to neighbor RMs and Passports in a different RID subnet. A metric value of 255 means the RID is unreachable in the throughput class of service. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID.
mscRtgDpnRidDelayNextHopLinkGroupsTable	1.3.6.1.4.1.562.36.2.1.40.4.2.226		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination RID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an RM. If no link groups are listed then the destination is not reachable in the delay class of service (except in the case of the local node's RID). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
mscRtgDpnRidDelayNextHopLinkGroupsEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.226.1		not-accessible	An entry in the mscRtgDpnRidDelayNextHopLinkGroupsTable.
I32 mscRtgDpnRidDelayNextHopLinkGroupsIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.226.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidDelayNextHopLinkGroupsTable.
NUM mscRtgDpnRidDelayNextHopLinkGroupsValue	1.3.6.1.4.1.562.36.2.1.40.4.2.226.1.2	RowPointer	read-only	This variable represents an individual value for the mscRtgDpnRidDelayNextHopLinkGroupsTable.
mscRtgDpnRidTputNextHopLinkGroupsTable	1.3.6.1.4.1.562.36.2.1.40.4.2.227		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination RID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an RM. If no link groups are listed then the destination is not reachable in the throughput class of service (except in the case of the local node's RID). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
mscRtgDpnRidTputNextHopLinkGroupsEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.227.1		not-accessible	An entry in the mscRtgDpnRidTputNextHopLinkGroupsTable.
I32 mscRtgDpnRidTputNextHopLinkGroupsIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.227.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidTputNextHopLinkGroupsTable.
NUM mscRtgDpnRidTputNextHopLinkGroupsValue	1.3.6.1.4.1.562.36.2.1.40.4.2.227.1.2	RowPointer	read-only	This variable represents an individual value for the mscRtgDpnRidTputNextHopLinkGroupsTable.
mscRtgDpnRidDelayPathTrafficProportionsTable	1.3.6.1.4.1.562.36.2.1.40.4.2.328		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs).
mscRtgDpnRidDelayPathTrafficProportionsEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.328.1		not-accessible	An entry in the mscRtgDpnRidDelayPathTrafficProportionsTable.
I32 mscRtgDpnRidDelayPathTrafficProportionsIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.328.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidDelayPathTrafficProportionsTable.
U32 mscRtgDpnRidDelayPathTrafficProportionsValue	1.3.6.1.4.1.562.36.2.1.40.4.2.328.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnRidDelayPathTrafficProportionsTable.
mscRtgDpnRidTputPathTrafficProportionsTable	1.3.6.1.4.1.562.36.2.1.40.4.2.329		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs).
mscRtgDpnRidTputPathTrafficProportionsEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.329.1		not-accessible	An entry in the mscRtgDpnRidTputPathTrafficProportionsTable.
I32 mscRtgDpnRidTputPathTrafficProportionsIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.329.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidTputPathTrafficProportionsTable.
U32 mscRtgDpnRidTputPathTrafficProportionsValue	1.3.6.1.4.1.562.36.2.1.40.4.2.329.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnRidTputPathTrafficProportionsTable.
mscRtgDpnRidDelayMetricTable	1.3.6.1.4.1.562.36.2.1.40.4.2.339		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay metrics of up to two paths to the destination RID. The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links in the path to the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the RID is unreachable in the delay class of service. A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID. Metric values of 2147483646 indicate that the destination RID is that of a Network Module (NM).
mscRtgDpnRidDelayMetricEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.339.1		not-accessible	An entry in the mscRtgDpnRidDelayMetricTable.
I32 mscRtgDpnRidDelayMetricIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.339.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidDelayMetricTable.
U32 mscRtgDpnRidDelayMetricValue	1.3.6.1.4.1.562.36.2.1.40.4.2.339.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnRidDelayMetricTable.
mscRtgDpnRidTputMetricTable	1.3.6.1.4.1.562.36.2.1.40.4.2.340		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput metrics of up to two paths to the destination RID. The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links in the path to the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the RID is unreachable in the throughput class of service. A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID.
mscRtgDpnRidTputMetricEntry	1.3.6.1.4.1.562.36.2.1.40.4.2.340.1		not-accessible	An entry in the mscRtgDpnRidTputMetricTable.
I32 mscRtgDpnRidTputMetricIndex	1.3.6.1.4.1.562.36.2.1.40.4.2.340.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidTputMetricTable.
U32 mscRtgDpnRidTputMetricValue	1.3.6.1.4.1.562.36.2.1.40.4.2.340.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnRidTputMetricTable.
mscRtgDpnMid	1.3.6.1.4.1.562.36.2.1.40.4.3
mscRtgDpnMidRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.3.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnMid components.
mscRtgDpnMidRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnMid component.
ROW mscRtgDpnMidRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnMid components. These components cannot be added nor deleted.
STR mscRtgDpnMidComponentName	1.3.6.1.4.1.562.36.2.1.40.4.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnMidStorageType	1.3.6.1.4.1.562.36.2.1.40.4.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnMid tables.
I32 mscRtgDpnMidIndex	1.3.6.1.4.1.562.36.2.1.40.4.3.1.1.10	Integer32	not-accessible	This variable represents the index for the mscRtgDpnMid tables.
mscRtgDpnMidOperTable	1.3.6.1.4.1.562.36.2.1.40.4.3.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes is maintained by DpnAddressPlan component to provide information about the MIDs reachable, or once reachable, through the local RID subnet.
mscRtgDpnMidOperEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.10.1		not-accessible	An entry in the mscRtgDpnMidOperTable.
U32 mscRtgDpnMidSubstituteRid	1.3.6.1.4.1.562.36.2.1.40.4.3.10.1.3	Unsigned32	read-only	This attribute indicates the substitute RID in use for the MID. This RID will be substituted for the RID in DPN packets destined to the local node's RID and the MID in question when the MID is unreachable (when, for example, all links to an AM from the Passport subnet are down). It will also be used in the case where the path through the substitute RID is better than that available through the subnet's connection to the cluster containing the AM MID. Substitute RIDs are learned from AM clusters that are supported by two RIDs (the Passport subnet's RID and another one). The operator can check this value to determine if a possible back up route to an AM exists. When there are no delayNextHopLinkGroups or tputNextHopLinkGroups shown to reach the MID, the substitute RID will be used. A value of 128 indicates that no substitute RID is known.
mscRtgDpnMidDelayNextHopLinkGroupsTable	1.3.6.1.4.1.562.36.2.1.40.4.3.228		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination MID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an AM. If no link groups are listed then the destination is not reachable in the delay class of service (except in the case of the local node's MID, or when a substitute RID path is available). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
mscRtgDpnMidDelayNextHopLinkGroupsEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.228.1		not-accessible	An entry in the mscRtgDpnMidDelayNextHopLinkGroupsTable.
I32 mscRtgDpnMidDelayNextHopLinkGroupsIndex	1.3.6.1.4.1.562.36.2.1.40.4.3.228.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnMidDelayNextHopLinkGroupsTable.
NUM mscRtgDpnMidDelayNextHopLinkGroupsValue	1.3.6.1.4.1.562.36.2.1.40.4.3.228.1.2	RowPointer	read-only	This variable represents an individual value for the mscRtgDpnMidDelayNextHopLinkGroupsTable.
mscRtgDpnMidTputNextHopLinkGroupsTable	1.3.6.1.4.1.562.36.2.1.40.4.3.229		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination MID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an AM. If no link groups are listed then the destination is not reachable in the throughput class of service (except in the case of the local node's MID, or when a substitute RID path is available). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
mscRtgDpnMidTputNextHopLinkGroupsEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.229.1		not-accessible	An entry in the mscRtgDpnMidTputNextHopLinkGroupsTable.
I32 mscRtgDpnMidTputNextHopLinkGroupsIndex	1.3.6.1.4.1.562.36.2.1.40.4.3.229.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnMidTputNextHopLinkGroupsTable.
NUM mscRtgDpnMidTputNextHopLinkGroupsValue	1.3.6.1.4.1.562.36.2.1.40.4.3.229.1.2	RowPointer	read-only	This variable represents an individual value for the mscRtgDpnMidTputNextHopLinkGroupsTable.
mscRtgDpnMidDelayMetricTable	1.3.6.1.4.1.562.36.2.1.40.4.3.330		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay metrics of up to two paths to the destination MID. The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links (or estimated delays for links to AMs) in the path to the destination. It is computed for every possible path to the destination and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the MID is unreachable in the delay class of service (though it might still be reachable via its substitute RID). A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination.A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's MID.
mscRtgDpnMidDelayMetricEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.330.1		not-accessible	An entry in the mscRtgDpnMidDelayMetricTable.
I32 mscRtgDpnMidDelayMetricIndex	1.3.6.1.4.1.562.36.2.1.40.4.3.330.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnMidDelayMetricTable.
U32 mscRtgDpnMidDelayMetricValue	1.3.6.1.4.1.562.36.2.1.40.4.3.330.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnMidDelayMetricTable.
mscRtgDpnMidTputMetricTable	1.3.6.1.4.1.562.36.2.1.40.4.3.331		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput metrics to the destination MID. The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links (or estimated bandwidth for links to AMs) in the path to the destination. It is computed for every possible path to the destination and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the MID is unreachable in the throughput class of service (though it might still be reachable via its substitute RID). A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID.
mscRtgDpnMidTputMetricEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.331.1		not-accessible	An entry in the mscRtgDpnMidTputMetricTable.
I32 mscRtgDpnMidTputMetricIndex	1.3.6.1.4.1.562.36.2.1.40.4.3.331.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnMidTputMetricTable.
U32 mscRtgDpnMidTputMetricValue	1.3.6.1.4.1.562.36.2.1.40.4.3.331.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnMidTputMetricTable.
mscRtgDpnMidDelayPathTrafficProportionsTable	1.3.6.1.4.1.562.36.2.1.40.4.3.332		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs).
mscRtgDpnMidDelayPathTrafficProportionsEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.332.1		not-accessible	An entry in the mscRtgDpnMidDelayPathTrafficProportionsTable.
I32 mscRtgDpnMidDelayPathTrafficProportionsIndex	1.3.6.1.4.1.562.36.2.1.40.4.3.332.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnMidDelayPathTrafficProportionsTable.
U32 mscRtgDpnMidDelayPathTrafficProportionsValue	1.3.6.1.4.1.562.36.2.1.40.4.3.332.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnMidDelayPathTrafficProportionsTable.
mscRtgDpnMidTputPathTrafficProportionsTable	1.3.6.1.4.1.562.36.2.1.40.4.3.333		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs).
mscRtgDpnMidTputPathTrafficProportionsEntry	1.3.6.1.4.1.562.36.2.1.40.4.3.333.1		not-accessible	An entry in the mscRtgDpnMidTputPathTrafficProportionsTable.
I32 mscRtgDpnMidTputPathTrafficProportionsIndex	1.3.6.1.4.1.562.36.2.1.40.4.3.333.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnMidTputPathTrafficProportionsTable.
U32 mscRtgDpnMidTputPathTrafficProportionsValue	1.3.6.1.4.1.562.36.2.1.40.4.3.333.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnMidTputPathTrafficProportionsTable.
mscRtgDpnCs	1.3.6.1.4.1.562.36.2.1.40.4.4
mscRtgDpnCsRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.4.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnCs components.
mscRtgDpnCsRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.4.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnCs component.
ROW mscRtgDpnCsRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnCs components. These components cannot be added nor deleted.
STR mscRtgDpnCsComponentName	1.3.6.1.4.1.562.36.2.1.40.4.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnCsStorageType	1.3.6.1.4.1.562.36.2.1.40.4.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnCs tables.
INT mscRtgDpnCsIndex	1.3.6.1.4.1.562.36.2.1.40.4.4.1.1.10	INTEGER	not-accessible	This variable represents the index for the mscRtgDpnCs tables.
mscRtgDpnCsDelayNextHopLinkGroupsTable	1.3.6.1.4.1.562.36.2.1.40.4.4.230		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the Call Server Resource Module (CSRM) supporting the server. DPN server traffic will be load shared across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to a CSRM. If no link groups are listed then the server is not reachable in the delay class of service. Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
mscRtgDpnCsDelayNextHopLinkGroupsEntry	1.3.6.1.4.1.562.36.2.1.40.4.4.230.1		not-accessible	An entry in the mscRtgDpnCsDelayNextHopLinkGroupsTable.
I32 mscRtgDpnCsDelayNextHopLinkGroupsIndex	1.3.6.1.4.1.562.36.2.1.40.4.4.230.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnCsDelayNextHopLinkGroupsTable.
NUM mscRtgDpnCsDelayNextHopLinkGroupsValue	1.3.6.1.4.1.562.36.2.1.40.4.4.230.1.2	RowPointer	read-only	This variable represents an individual value for the mscRtgDpnCsDelayNextHopLinkGroupsTable.
mscRtgDpnCsTputNextHopLinkGroupsTable	1.3.6.1.4.1.562.36.2.1.40.4.4.231		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is either the next hop in the path to the Call Server Resource Module (CSRM) supporting the server. DPN server traffic will be load shared across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to the CSRM. If no link groups are listed then the server is not reachable in the throughput class of service. Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
mscRtgDpnCsTputNextHopLinkGroupsEntry	1.3.6.1.4.1.562.36.2.1.40.4.4.231.1		not-accessible	An entry in the mscRtgDpnCsTputNextHopLinkGroupsTable.
I32 mscRtgDpnCsTputNextHopLinkGroupsIndex	1.3.6.1.4.1.562.36.2.1.40.4.4.231.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnCsTputNextHopLinkGroupsTable.
NUM mscRtgDpnCsTputNextHopLinkGroupsValue	1.3.6.1.4.1.562.36.2.1.40.4.4.231.1.2	RowPointer	read-only	This variable represents an individual value for the mscRtgDpnCsTputNextHopLinkGroupsTable.
mscRtgDpnCsDelayMetricTable	1.3.6.1.4.1.562.36.2.1.40.4.4.334		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay metrics of up to two paths to the server supported on a Call Server Resource Module (CSRM). The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links in the path to the CSRM supporting the server. It is computed for every possible path to the server and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the server is unreachable in the delay class of service. A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination. A value of 0 indicates that no cost is associated with the path to the destination.
mscRtgDpnCsDelayMetricEntry	1.3.6.1.4.1.562.36.2.1.40.4.4.334.1		not-accessible	An entry in the mscRtgDpnCsDelayMetricTable.
I32 mscRtgDpnCsDelayMetricIndex	1.3.6.1.4.1.562.36.2.1.40.4.4.334.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnCsDelayMetricTable.
U32 mscRtgDpnCsDelayMetricValue	1.3.6.1.4.1.562.36.2.1.40.4.4.334.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnCsDelayMetricTable.
mscRtgDpnCsTputMetricTable	1.3.6.1.4.1.562.36.2.1.40.4.4.335		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput metrics of up to two paths to reach the server supported on a Call Server Resource Module (CSRM). The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links in the path to the CSRM supporting the server. It is computed for every possible path to the server and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the server is unreachable in the throughput class of service. A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination.
mscRtgDpnCsTputMetricEntry	1.3.6.1.4.1.562.36.2.1.40.4.4.335.1		not-accessible	An entry in the mscRtgDpnCsTputMetricTable.
I32 mscRtgDpnCsTputMetricIndex	1.3.6.1.4.1.562.36.2.1.40.4.4.335.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnCsTputMetricTable.
U32 mscRtgDpnCsTputMetricValue	1.3.6.1.4.1.562.36.2.1.40.4.4.335.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnCsTputMetricTable.
mscRtgDpnCsDelayPathTrafficProportionsTable	1.3.6.1.4.1.562.36.2.1.40.4.4.336		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs).
mscRtgDpnCsDelayPathTrafficProportionsEntry	1.3.6.1.4.1.562.36.2.1.40.4.4.336.1		not-accessible	An entry in the mscRtgDpnCsDelayPathTrafficProportionsTable.
I32 mscRtgDpnCsDelayPathTrafficProportionsIndex	1.3.6.1.4.1.562.36.2.1.40.4.4.336.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnCsDelayPathTrafficProportionsTable.
U32 mscRtgDpnCsDelayPathTrafficProportionsValue	1.3.6.1.4.1.562.36.2.1.40.4.4.336.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnCsDelayPathTrafficProportionsTable.
mscRtgDpnCsTputPathTrafficProportionsTable	1.3.6.1.4.1.562.36.2.1.40.4.4.337		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs).
mscRtgDpnCsTputPathTrafficProportionsEntry	1.3.6.1.4.1.562.36.2.1.40.4.4.337.1		not-accessible	An entry in the mscRtgDpnCsTputPathTrafficProportionsTable.
I32 mscRtgDpnCsTputPathTrafficProportionsIndex	1.3.6.1.4.1.562.36.2.1.40.4.4.337.1.1	Integer32	not-accessible	This variable represents the index for the mscRtgDpnCsTputPathTrafficProportionsTable.
U32 mscRtgDpnCsTputPathTrafficProportionsValue	1.3.6.1.4.1.562.36.2.1.40.4.4.337.1.2	Unsigned32	read-only	This variable represents an individual value for the mscRtgDpnCsTputPathTrafficProportionsTable.
mscRtgDpnLg	1.3.6.1.4.1.562.36.2.1.40.4.5
mscRtgDpnLgRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.5.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnLg components.
mscRtgDpnLgRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.5.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnLg component.
ROW mscRtgDpnLgRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnLg components. These components cannot be added nor deleted.
STR mscRtgDpnLgComponentName	1.3.6.1.4.1.562.36.2.1.40.4.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnLgStorageType	1.3.6.1.4.1.562.36.2.1.40.4.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnLg tables.
STR mscRtgDpnLgIndex	1.3.6.1.4.1.562.36.2.1.40.4.5.1.1.10	AsciiStringIndex	not-accessible	This variable represents the index for the mscRtgDpnLg tables.
mscRtgDpnLgOperTable	1.3.6.1.4.1.562.36.2.1.40.4.5.3		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes provides information about the gateways in use to reach Passports, RMs and AMs connected to this Passport node.
mscRtgDpnLgOperEntry	1.3.6.1.4.1.562.36.2.1.40.4.5.3.1		not-accessible	An entry in the mscRtgDpnLgOperTable.
INT mscRtgDpnLgFarEndType	1.3.6.1.4.1.562.36.2.1.40.4.5.3.1.1	INTEGER	read-only	This attribute indicates the type of the far end module (EM, AM or RM).
U32 mscRtgDpnLgFarEndRid	1.3.6.1.4.1.562.36.2.1.40.4.5.3.1.2	Unsigned32	read-only	This attribute indicates the far end neighbor RID. If the neighbor is an AM then the RID is that of the Passport node.
U32 mscRtgDpnLgFarEndMid	1.3.6.1.4.1.562.36.2.1.40.4.5.3.1.3	Unsigned32	read-only	This attribute indicates the far end neighbor MID.
U32 mscRtgDpnLgDelayMetric	1.3.6.1.4.1.562.36.2.1.40.4.5.3.1.4	Unsigned32	read-only	This attribute indicates the delay metric calculated for the link group. If the type of the far end switch is AM, the delay metric is calculated for MID routing, ranging from 1 to 2147483647. If the type of the far end switch is EM or RM, the delay metric, ranging from 1 to 255, is based on the measured round trip delay of the delay preferred links in the group. A link group with a low metric value is preferable to one with a higher value as it is associated with lower delay facilities.
U32 mscRtgDpnLgTputMetric	1.3.6.1.4.1.562.36.2.1.40.4.5.3.1.5	Unsigned32	read-only	This attribute indicates the throughput metric calculated for the link group. If the type of the far end switch is AM, the throughput metric is calculated for MID routing, ranging from 1 to 2147483647. If the type of the far end switch is EM or RM, the throughput metric, ranging from 1 to 255, is based on the sum of the bandwidth available for all links in the group. A link group with a low metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities.
mscRtgDpnLpStats	1.3.6.1.4.1.562.36.2.1.40.4.6
mscRtgDpnLpStatsRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.6.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnLpStats components.
mscRtgDpnLpStatsRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.6.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnLpStats component.
ROW mscRtgDpnLpStatsRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.6.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnLpStats components. These components cannot be added nor deleted.
STR mscRtgDpnLpStatsComponentName	1.3.6.1.4.1.562.36.2.1.40.4.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnLpStatsStorageType	1.3.6.1.4.1.562.36.2.1.40.4.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnLpStats tables.
I32 mscRtgDpnLpStatsIndex	1.3.6.1.4.1.562.36.2.1.40.4.6.1.1.10	Integer32	not-accessible	This variable represents the index for the mscRtgDpnLpStats tables.
mscRtgDpnLpStatsFwdStatsTable	1.3.6.1.4.1.562.36.2.1.40.4.6.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes provides DPN packet forwarding statistics for this LP. The statistics can be used to monitor the connectionless traffic profile on this LP.
mscRtgDpnLpStatsFwdStatsEntry	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1		not-accessible	An entry in the mscRtgDpnLpStatsFwdStatsTable.
NUM mscRtgDpnLpStatsTotalPackets	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.1	PassportCounter64	read-only	This attribute counts the total number of delay and throughput packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnLpStatsThroughputPackets	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.2	PassportCounter64	read-only	This attribute counts the throughput packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnLpStatsDelayPackets	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.3	PassportCounter64	read-only	This attribute counts the delay packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnLpStatsNormalReliabilityPackets	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.4	PassportCounter64	read-only	This attribute counts the normal reliability packets handled by DPN packet forwarding on this LP when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnLpStatsHighReliabilityPackets	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.5	PassportCounter64	read-only	This attribute counts the high reliability packets handled by DPN packet forwarding on this LP when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnLpStatsDiscardNoRoute	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.6	PassportCounter64	read-only	This attribute counts the packets discarded when DPN packet forwarding has failed to find a route to forward the packets on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnLpStatsInterruptingPackets	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.7	PassportCounter64	read-only	This attribute counts the total number of multimedia packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnLpStatsDiscardLpCongested	1.3.6.1.4.1.562.36.2.1.40.4.6.10.1.8	PassportCounter64	read-only	This attribute counts the packets that have been discarded by DPN packet forwarding, on the entire module, due to congestion on this LP. This value is the sum of the packets discarded by all LPs due to insufficient shared memory on this one. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
mscRtgDpnRidFilter	1.3.6.1.4.1.562.36.2.1.40.4.7
mscRtgDpnRidFilterRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.7.1		not-accessible	This entry controls the addition and deletion of mscRtgDpnRidFilter components.
mscRtgDpnRidFilterRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.7.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnRidFilter component.
ROW mscRtgDpnRidFilterRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscRtgDpnRidFilter components. These components can be added and deleted.
STR mscRtgDpnRidFilterComponentName	1.3.6.1.4.1.562.36.2.1.40.4.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnRidFilterStorageType	1.3.6.1.4.1.562.36.2.1.40.4.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnRidFilter tables.
I32 mscRtgDpnRidFilterIndex	1.3.6.1.4.1.562.36.2.1.40.4.7.1.1.10	Integer32	not-accessible	This variable represents the index for the mscRtgDpnRidFilter tables.
mscRtgDpnRidFilterImportRidListTable	1.3.6.1.4.1.562.36.2.1.40.4.7.303		not-accessible	This attribute specifies the list of RIDs whose reachability information will be accepted from the instance RID. Information about RIDs which do not appear in this list will be ignored and this node considers those RIDs to be unreachable from the instance RID. Note that this also applies to the instance RID itself, that is, if the instance RID does not appear in the import list, this node considers the instance RID to be unreachable from the instance RID. By default this list contains all valid RIDs, meaning that information about all RIDs will be accepted from the instance RID. When this list is empty, no RID information is accepted from the instance RID, therefore, no RID traffic will be routed to it. A warning is generated when an empty import list is detected. RID 127 is the Network Services Sharing (NSS) RID, used to identify DPN-100 nodes running call servers which can be used for remote call processing. This RID can be filtered like any other using the import RID list.
mscRtgDpnRidFilterImportRidListEntry	1.3.6.1.4.1.562.36.2.1.40.4.7.303.1		not-accessible	An entry in the mscRtgDpnRidFilterImportRidListTable.
I32 mscRtgDpnRidFilterImportRidListValue	1.3.6.1.4.1.562.36.2.1.40.4.7.303.1.1	Integer32	read-write	This variable represents both the value and the index for the mscRtgDpnRidFilterImportRidListTable.
ROW mscRtgDpnRidFilterImportRidListRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.7.303.1.2	RowStatus	write-only	This variable is used to control the addition and deletion of individual values of the mscRtgDpnRidFilterImportRidListTable.
mscRtgDpnRidFilterExportRidListTable	1.3.6.1.4.1.562.36.2.1.40.4.7.304		not-accessible	This attribute specifies the list of RIDs whose true reachability is advertised to the instance RID. RIDs which do not appear in this list are advertised to the instance RID as being unreachable from this node. By default, this list contains all valid RIDs, meaning that true reachability information for all RIDs is advertised to the instance RID. When this list is empty, all RIDs will be advertised to the instance RID as unreachable, including this node's own RID, therefore the instance RID will not route any RID traffic to this RID. A warning is generated when an empty export list is detected. RID 127 is the Network Services Sharing (NSS) RID, used to identify DPN-100 nodes running call servers which can be used for remote call processing. This RID can be filtered like any other using the import RID list.
mscRtgDpnRidFilterExportRidListEntry	1.3.6.1.4.1.562.36.2.1.40.4.7.304.1		not-accessible	An entry in the mscRtgDpnRidFilterExportRidListTable.
I32 mscRtgDpnRidFilterExportRidListValue	1.3.6.1.4.1.562.36.2.1.40.4.7.304.1.1	Integer32	read-write	This variable represents both the value and the index for the mscRtgDpnRidFilterExportRidListTable.
ROW mscRtgDpnRidFilterExportRidListRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.7.304.1.2	RowStatus	write-only	This variable is used to control the addition and deletion of individual values of the mscRtgDpnRidFilterExportRidListTable.
mscRtgDpnArt	1.3.6.1.4.1.562.36.2.1.40.4.9
mscRtgDpnArtRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.9.1		not-accessible	This entry controls the addition and deletion of mscRtgDpnArt components.
mscRtgDpnArtRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnArt component.
ROW mscRtgDpnArtRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.9.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnArt components. These components cannot be added nor deleted.
STR mscRtgDpnArtComponentName	1.3.6.1.4.1.562.36.2.1.40.4.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnArtStorageType	1.3.6.1.4.1.562.36.2.1.40.4.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnArt tables.
NON mscRtgDpnArtIndex	1.3.6.1.4.1.562.36.2.1.40.4.9.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscRtgDpnArt tables.
mscRtgDpnArtErrRid	1.3.6.1.4.1.562.36.2.1.40.4.9.2
mscRtgDpnArtErrRidRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.9.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnArtErrRid components.
mscRtgDpnArtErrRidRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.2.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnArtErrRid component.
ROW mscRtgDpnArtErrRidRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnArtErrRid components. These components cannot be added nor deleted.
STR mscRtgDpnArtErrRidComponentName	1.3.6.1.4.1.562.36.2.1.40.4.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnArtErrRidStorageType	1.3.6.1.4.1.562.36.2.1.40.4.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnArtErrRid tables.
I32 mscRtgDpnArtErrRidIndex	1.3.6.1.4.1.562.36.2.1.40.4.9.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscRtgDpnArtErrRid tables.
mscRtgDpnArtErrRidOperTable	1.3.6.1.4.1.562.36.2.1.40.4.9.2.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes provides information about a single error destination (RID or MID) discovered by the automatic route tester.
mscRtgDpnArtErrRidOperEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.2.10.1		not-accessible	An entry in the mscRtgDpnArtErrRidOperTable.
INT mscRtgDpnArtErrRidDelayCosErrType	1.3.6.1.4.1.562.36.2.1.40.4.9.2.10.1.1	INTEGER	read-only	This attribute indicates the type of error that was found with the route to this destination (on delay COS) by the automatic route tester.
INT mscRtgDpnArtErrRidThroughputCosErrType	1.3.6.1.4.1.562.36.2.1.40.4.9.2.10.1.2	INTEGER	read-only	This attribute indicates the type of error that was found with this destination (on throughput COS) by the automatic route tester.
mscRtgDpnArtErrRidDelayErrPathTable	1.3.6.1.4.1.562.36.2.1.40.4.9.2.688		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute provides hop-by-hop route information for a destination to which a routing loop problem (on delay COS) was found. For a timeout problem, this information is not provided.
mscRtgDpnArtErrRidDelayErrPathEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.2.688.1		not-accessible	An entry in the mscRtgDpnArtErrRidDelayErrPathTable.
STR mscRtgDpnArtErrRidDelayErrPathValue	1.3.6.1.4.1.562.36.2.1.40.4.9.2.688.1.1	AsciiString	read-only	This variable represents both the value and the index for the mscRtgDpnArtErrRidDelayErrPathTable.
mscRtgDpnArtErrRidTputErrPathTable	1.3.6.1.4.1.562.36.2.1.40.4.9.2.689		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute provides hop-by-hop route information for a destination to which a routing loop problem (on throughput COS) was found. For a timeout problem, this information is not provided.
mscRtgDpnArtErrRidTputErrPathEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.2.689.1		not-accessible	An entry in the mscRtgDpnArtErrRidTputErrPathTable.
STR mscRtgDpnArtErrRidTputErrPathValue	1.3.6.1.4.1.562.36.2.1.40.4.9.2.689.1.1	AsciiString	read-only	This variable represents both the value and the index for the mscRtgDpnArtErrRidTputErrPathTable.
mscRtgDpnArtErrMid	1.3.6.1.4.1.562.36.2.1.40.4.9.3
mscRtgDpnArtErrMidRowStatusTable	1.3.6.1.4.1.562.36.2.1.40.4.9.3.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscRtgDpnArtErrMid components.
mscRtgDpnArtErrMidRowStatusEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.3.1.1		not-accessible	A single entry in the table represents a single mscRtgDpnArtErrMid component.
ROW mscRtgDpnArtErrMidRowStatus	1.3.6.1.4.1.562.36.2.1.40.4.9.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscRtgDpnArtErrMid components. These components cannot be added nor deleted.
STR mscRtgDpnArtErrMidComponentName	1.3.6.1.4.1.562.36.2.1.40.4.9.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscRtgDpnArtErrMidStorageType	1.3.6.1.4.1.562.36.2.1.40.4.9.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscRtgDpnArtErrMid tables.
I32 mscRtgDpnArtErrMidIndex	1.3.6.1.4.1.562.36.2.1.40.4.9.3.1.1.10	Integer32	not-accessible	This variable represents the index for the mscRtgDpnArtErrMid tables.
mscRtgDpnArtErrMidOperTable	1.3.6.1.4.1.562.36.2.1.40.4.9.3.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes provides information about a single error destination (RID or MID) discovered by the automatic route tester.
mscRtgDpnArtErrMidOperEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.3.10.1		not-accessible	An entry in the mscRtgDpnArtErrMidOperTable.
INT mscRtgDpnArtErrMidDelayCosErrType	1.3.6.1.4.1.562.36.2.1.40.4.9.3.10.1.1	INTEGER	read-only	This attribute indicates the type of error that was found with the route to this destination (on delay COS) by the automatic route tester.
INT mscRtgDpnArtErrMidThroughputCosErrType	1.3.6.1.4.1.562.36.2.1.40.4.9.3.10.1.2	INTEGER	read-only	This attribute indicates the type of error that was found with this destination (on throughput COS) by the automatic route tester.
mscRtgDpnArtErrMidDelayErrPathTable	1.3.6.1.4.1.562.36.2.1.40.4.9.3.688		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute provides hop-by-hop route information for a destination to which a routing loop problem (on delay COS) was found. For a timeout problem, this information is not provided.
mscRtgDpnArtErrMidDelayErrPathEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.3.688.1		not-accessible	An entry in the mscRtgDpnArtErrMidDelayErrPathTable.
STR mscRtgDpnArtErrMidDelayErrPathValue	1.3.6.1.4.1.562.36.2.1.40.4.9.3.688.1.1	AsciiString	read-only	This variable represents both the value and the index for the mscRtgDpnArtErrMidDelayErrPathTable.
mscRtgDpnArtErrMidTputErrPathTable	1.3.6.1.4.1.562.36.2.1.40.4.9.3.689		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute provides hop-by-hop route information for a destination to which a routing loop problem (on throughput COS) was found. For a timeout problem, this information is not provided.
mscRtgDpnArtErrMidTputErrPathEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.3.689.1		not-accessible	An entry in the mscRtgDpnArtErrMidTputErrPathTable.
STR mscRtgDpnArtErrMidTputErrPathValue	1.3.6.1.4.1.562.36.2.1.40.4.9.3.689.1.1	AsciiString	read-only	This variable represents both the value and the index for the mscRtgDpnArtErrMidTputErrPathTable.
mscRtgDpnArtProvTable	1.3.6.1.4.1.562.36.2.1.40.4.9.10		not-accessible	This group of attributes provides information about the option(s) and parameter(s) that the operator can set to control the behavior of automatic route tester.
mscRtgDpnArtProvEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.10.1		not-accessible	An entry in the mscRtgDpnArtProvTable.
INT mscRtgDpnArtCosUnderTest	1.3.6.1.4.1.562.36.2.1.40.4.9.10.1.1	INTEGER	read-write	This attribute specifies the COS type(s) (delay, throughput, delay and throughput) for which the automatic route testing is conducted. A description of possible values for this attribute follows: none: Do not conduct route testing for any COS type (essentially the automatic route tester is turned off). delayCosOnly: Conduct route testing to each reachable RID and MID destination for delay COS only. tputCosOnly: Conduct route testing to each reachable RID and MID destination for throughput COS only. delayAndTputCos: Conduct route testing to each reachable RID and MID destination for delay and throughput COSs. Setting this attribute to 'none' allows the operator to turn off the automatic route tester. Using value 'delayCosOnly' or 'tputCosOnly' tells the automated route tester to only work on one COS of the operator's choice. Choosing value 'delayAndTputCos' when both the delay and throughput COSs are to be tested. The network resources consumption (such as CPU, memory, link bandwidth) of the automatic route tester working on two COSs will roughly be two times as much as working on only one COS. The time to complete a full cycle of route testing to every reachable destination is also expected to be twice as long when working on two COSs.
U32 mscRtgDpnArtTestInterval	1.3.6.1.4.1.562.36.2.1.40.4.9.10.1.2	Unsigned32	read-write	This attribute specifies the time interval between the successive testson different destinations. The automatic route tester periodically tries to test the route to a different reachable destination (RID or MID). In order not to put too heavy a load on the network, it will wait for a period of time equal to this interval before it will start working on another destination. The smaller the value of this attribute, the more frequently the automatic route tester gets invoked to work on route testing. On one hand, doing so will reduce the amount of time needed to complete a fully cycle of route testing to every reachable destination. One the other hand, this will increase the resource comsumption of the automatic route tester accordingly. During each testInterval, the automatic route tester will first retry the routes to each error destination, if any, to see if they have recovered. After the retries of all these error destinations, another RID/MID destination from the DPN routing table (not in the error destination list) will be chosen to conduct route testing only if the current number of error destinations is less than 10. If the number of error destinations has reached 10, no other destinations will be chosen and the automatic route tester will focus on retrying only these error destinations at each testInterval. However, if the routes to at least one error destination has recovered or has become unreachable, the number of error destinations will fall below 10, and the selection and conducting of route testing on another destination from the DPN routing table will resume.
mscRtgDpnArtOperTable	1.3.6.1.4.1.562.36.2.1.40.4.9.11		not-accessible	This group of attributes provides information about the outstanding error destinations discovered by the automatic route tester.
mscRtgDpnArtOperEntry	1.3.6.1.4.1.562.36.2.1.40.4.9.11.1		not-accessible	An entry in the mscRtgDpnArtOperTable.
U32 mscRtgDpnArtNumOfLoopDests	1.3.6.1.4.1.562.36.2.1.40.4.9.11.1.1	Unsigned32	read-only	This attribute indicates the total number of RID and MID destinations to which a routing loop problem has been detected. Whenever a new error destination of routing loop type is found, this value is increased by one, and whenever the loop problem to one destination goes away or this destination has become unreachable, this value is decreased by one.
U32 mscRtgDpnArtNumOfTimeoutDests	1.3.6.1.4.1.562.36.2.1.40.4.9.11.1.2	Unsigned32	read-only	This attribute indicates the total number of RID and MID destinations to which a timeout problem has been detected. Whenever a new error destination of timeout type is found, this value is increased by one, and whenever the timeout problem to one destination goes away or this destination has become unreachable, this value is decreased by one.
mscRtgDpnProvTable	1.3.6.1.4.1.562.36.2.1.40.4.11		not-accessible	This group contains the provisioning data for the DpnAddressPlan. Attributes in this group must be set to allow the DpnAddressPlan component to function properly.
mscRtgDpnProvEntry	1.3.6.1.4.1.562.36.2.1.40.4.11.1		not-accessible	An entry in the mscRtgDpnProvTable.
U32 mscRtgDpnLogicalNetworkNumber	1.3.6.1.4.1.562.36.2.1.40.4.11.1.1	Unsigned32	read-only	This attribute specifies the Logical Network Number for the DpnAddressPlan. Since only one instance of this component can exist, this value is always set to one. It is provided here to be consistent with other address plans and so that it can be queried.
U32 mscRtgDpnRoutingId	1.3.6.1.4.1.562.36.2.1.40.4.11.1.2	Unsigned32	read-write	This attribute specifies the Routing Identifier (RID) associated with the Passport node. The RID is used to identify a group of one or more interconnected Passport nodes (called a subnet) supporting the transport of DPN traffic. Its value must be the same as that of the other Passport nodes in this subnet and different from that of all RMs and other Passport subnets in the network. The routingId must be set when a DpnAddressPlan component is configured on an Passport node. Changing the value of the routingId will cause the node to restart.
U32 mscRtgDpnModuleId	1.3.6.1.4.1.562.36.2.1.40.4.11.1.3	Unsigned32	read-write	This attribute specifies the Module Identifier (MID) associated with the Passport node. The MID is used to identify an Passport node supporting the transport of DPN traffic. Its value must be different from that of all MIDs assigned to Passport nodes in this RID subnet (interconnected Passport nodes sharing a RID) and AMs in clusters supported by this subnet. If routing zones are used, it must also be unique from all other MIDs in this zone. The moduleId must be set when a DpnAddressPlan component is configured on an Passport node. Changing the value of the moduleId will cause the node to restart.
U32 mscRtgDpnDelayMetricCutOff	1.3.6.1.4.1.562.36.2.1.40.4.11.1.4	Unsigned32	read-write	This attribute specifies the delay metric value beyond which a destination RID should be considered unreachable. That is, if a delay metric to a RID is equal to or greater than this value then the RID is considered to be unreachable in the delay class of service. Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario. Care must be taken to ensure that the value chosen is big enough for the longest delay path in the network. This attribute is optional; a default of 128 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value.
U32 mscRtgDpnThroughputMetricCutOff	1.3.6.1.4.1.562.36.2.1.40.4.11.1.5	Unsigned32	read-write	This attribute specifies the throughput metric value beyond which a destination RID should be considered unreachable. That is, if a throughput metric to a RID is equal to or greater than this value then the RID will be considered to be unreachable in the throughput class of service. Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario.Care must be taken to ensure that the value chosen is big enough for the longest throughput path in the network. This attribute is optional; a default of 245 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value.
INT mscRtgDpnForwardingPolicy	1.3.6.1.4.1.562.36.2.1.40.4.11.1.6	INTEGER	read-write	This attribute specifies the forwarding policy used by packet forwarding to handle DPN traffic on a Passport module. When this attribute is set to loadshare, DPN traffic is shared among preferred links in a link group in proportion to the available bandwidth on each link; the traffic is not forwarded in an order- preserved manner and needs resequencing at the destination, but the available bandwidth in a link group is utilized efficiently. When this attribute is set to loadspread, DPN traffic is forwarded in an order-preserved manner along a randomly selected route; the traffic sticks to a particular link in a link group, and will not spill over to other links in the link group unless there is congestion on the selected link. When this attribute is set to loadspreadFast, DPN traffic is forwarded in an order-preserved manner along a randomly selected route; the traffic sticks to a particular link in a link group, and will not spill over to other links in the link group. Choosing this value may improve throughput but traffic may be discarded in the presence of congestion. It is recommended that all nodes in the network be provisioned with the same forwarding policy.
U32 mscRtgDpnDelayMetricRangeBoundary	1.3.6.1.4.1.562.36.2.1.40.4.11.1.7	Unsigned32	read-write	This attribute specifies the total path delay metric below which the variance value specified for delay COS and a low metric range is used, and at or above which the variance value specified for delay COS and a high metric range is used. This attribute defaults to 0, so that the variance value specified for delay COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for delay COS and a low metric range is used for all delay paths.
U32 mscRtgDpnTputMetricRangeBoundary	1.3.6.1.4.1.562.36.2.1.40.4.11.1.8	Unsigned32	read-write	This attribute specifies the total path throughput metric below which the variance value specified for throughput COS and a low metric range is used, and at or above which the variance value specified for throughput COS and a high metric range is used. This attribute defaults to 0, so that the variance value specified for throughput COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for throughput COS and a low metric range is used for all throughput paths.
mscRtgDpnConStatsTable	1.3.6.1.4.1.562.36.2.1.40.4.13		not-accessible	This group of attributes provides statistics about the behavior of the DpnAddressPlan component. The statistics concern the distribution of routing information, required to support the routing of DPN traffic, to all Passport nodes in the RID subnet.
mscRtgDpnConStatsEntry	1.3.6.1.4.1.562.36.2.1.40.4.13.1		not-accessible	An entry in the mscRtgDpnConStatsTable.
U32 mscRtgDpnControlPktTx	1.3.6.1.4.1.562.36.2.1.40.4.13.1.1	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packets, originating from this node, sent to other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The Packets received from a neighbor node and forwarded to other neighbors are not counted. The counter wraps around to zero when the maximum value is reached.
U32 mscRtgDpnControlPktRx	1.3.6.1.4.1.562.36.2.1.40.4.13.1.2	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packets received from other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached.
U32 mscRtgDpnControlBytesTx	1.3.6.1.4.1.562.36.2.1.40.4.13.1.3	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packet bytes, originating from the node, sent to other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. Packet bytes received from a neighbor node and forwarded to other neighbors are not counted. The counter wraps around to zero when the maximum value is reached.
U32 mscRtgDpnControlBytesRx	1.3.6.1.4.1.562.36.2.1.40.4.13.1.4	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packet bytes received from other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached.
U32 mscRtgDpnOutOfSequencePkt	1.3.6.1.4.1.562.36.2.1.40.4.13.1.5	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packets received and rejected. These packets contained old sequence numbers. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached.
mscRtgDpnFwdStatsTable	1.3.6.1.4.1.562.36.2.1.40.4.14		not-accessible	This group of attributes provides statistics for the traffic handled by DPN packet forwarding on this module. The statistics can be used to monitor the connectionless traffic profile on this module.
mscRtgDpnFwdStatsEntry	1.3.6.1.4.1.562.36.2.1.40.4.14.1		not-accessible	An entry in the mscRtgDpnFwdStatsTable.
NUM mscRtgDpnTotalPackets	1.3.6.1.4.1.562.36.2.1.40.4.14.1.1	PassportCounter64	read-only	This attribute counts the total number of delay and throughput packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnThroughputPackets	1.3.6.1.4.1.562.36.2.1.40.4.14.1.2	PassportCounter64	read-only	This attribute counts the throughput packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnDelayPackets	1.3.6.1.4.1.562.36.2.1.40.4.14.1.3	PassportCounter64	read-only	This attribute counts the delay packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnNormalReliabilityPackets	1.3.6.1.4.1.562.36.2.1.40.4.14.1.4	PassportCounter64	read-only	This attribute counts the normal reliability packets handled by DPN packet forwarding on this module when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnHighReliabilityPackets	1.3.6.1.4.1.562.36.2.1.40.4.14.1.5	PassportCounter64	read-only	This attribute counts the high reliability packets handled by DPN packet forwarding on this module when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnDiscardNoRoute	1.3.6.1.4.1.562.36.2.1.40.4.14.1.6	PassportCounter64	read-only	This attribute counts the packets discarded when DPN packet forwarding has failed to find a route to forward the packets on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnInterruptingPackets	1.3.6.1.4.1.562.36.2.1.40.4.14.1.7	PassportCounter64	read-only	This attribute counts the total number of multimedia packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM mscRtgDpnDiscardLpCongested	1.3.6.1.4.1.562.36.2.1.40.4.14.1.8	PassportCounter64	read-only	This attribute counts the packets that have been discarded by packet forwarding due to LP congestion on this module. A packet encounters LP congestion when there is insufficient shared memory. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
mscRtgDpnCallServerModuleRidsTable	1.3.6.1.4.1.562.36.2.1.40.4.232		not-accessible	This attribute indicates the RIDs of the Call Server Resource Modules (CSRMs) currently in use to support Call Server functions, such as SCR and DCR, for the Passport subnet. Up to two CSRMs can be in use to support such Call Server functions. Note that packets destined to Call Server functions are routed to the closest CSRM supporting the required server functionality.
mscRtgDpnCallServerModuleRidsEntry	1.3.6.1.4.1.562.36.2.1.40.4.232.1		not-accessible	An entry in the mscRtgDpnCallServerModuleRidsTable.
I32 mscRtgDpnCallServerModuleRidsValue	1.3.6.1.4.1.562.36.2.1.40.4.232.1.1	Integer32	read-only	This variable represents both the value and the index for the mscRtgDpnCallServerModuleRidsTable.
mscRtgDpnSubnetMidsTable	1.3.6.1.4.1.562.36.2.1.40.4.233		not-accessible	This attribute indicates which of the ReachableMidInfo (Mid) components refer to MIDs which are members of the Passport subnet. This list does not include AMs connected to the subnet.
mscRtgDpnSubnetMidsEntry	1.3.6.1.4.1.562.36.2.1.40.4.233.1		not-accessible	An entry in the mscRtgDpnSubnetMidsTable.
NUM mscRtgDpnSubnetMidsValue	1.3.6.1.4.1.562.36.2.1.40.4.233.1.1	RowPointer	read-only	This variable represents both the value and the index for the mscRtgDpnSubnetMidsTable.
mscRtgDpnVarianceTable	1.3.6.1.4.1.562.36.2.1.40.4.343		not-accessible	This attribute specifies the variance values for high and low metric ranges, for each class of service (COS). A variance value is the maximum allowed difference in metric between the best path and the second path, as a percentage of the best path metric. High and low metric ranges are defined for each COS by the delayMetricRangeBoundary and tputMetricRangeBoundary attributes, and refer to total path metrics. When a variance value for a certain COS and metric range is set to the default value of 0, only equal metric paths can be used under that COS when the best path metric is in that range. When it is set to a value greater than 0, an alternate path which is safe (that is, non-looping) and which has a metric within this percentage of the best path metric can be used as a multipath. The special value of 9999 signifies an infinite variance, so that any safe alternate path may be used in addition to the single best path, regardless of its metric.
mscRtgDpnVarianceEntry	1.3.6.1.4.1.562.36.2.1.40.4.343.1		not-accessible	An entry in the mscRtgDpnVarianceTable.
INT mscRtgDpnVarianceCosIndex	1.3.6.1.4.1.562.36.2.1.40.4.343.1.1	INTEGER	not-accessible	This variable represents the next to last index for the mscRtgDpnVarianceTable.
INT mscRtgDpnVarianceMetricRangeIndex	1.3.6.1.4.1.562.36.2.1.40.4.343.1.2	INTEGER	not-accessible	This variable represents the final index for the mscRtgDpnVarianceTable.
U32 mscRtgDpnVarianceValue	1.3.6.1.4.1.562.36.2.1.40.4.343.1.3	Unsigned32	read-write	This variable represents an individual value for the mscRtgDpnVarianceTable.
dpnRoutingMIB	1.3.6.1.4.1.562.36.2.2.21
dpnRoutingGroup	1.3.6.1.4.1.562.36.2.2.21.1
dpnRoutingGroupCA	1.3.6.1.4.1.562.36.2.2.21.1.1
dpnRoutingGroupCA02	1.3.6.1.4.1.562.36.2.2.21.1.1.3
dpnRoutingGroupCA02A	1.3.6.1.4.1.562.36.2.2.21.1.1.3.2
dpnRoutingCapabilities	1.3.6.1.4.1.562.36.2.2.21.3
dpnRoutingCapabilitiesCA	1.3.6.1.4.1.562.36.2.2.21.3.1
dpnRoutingCapabilitiesCA02	1.3.6.1.4.1.562.36.2.2.21.3.1.3
dpnRoutingCapabilitiesCA02A	1.3.6.1.4.1.562.36.2.2.21.3.1.3.2

RFC description

Maintains routing information for DPN (Data Packet Network) traffic on Nortel MscPassport systems. Manages address plans for intermediate and endpoint nodes.

Start monitoring Nortel MsCarrier MscPassport switch (DPN network routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-MsCarrier-MscPassport-DpnRoutingMIB

What Is Nortel-MsCarrier-MscPassport-DpnRoutingMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description