Nortel-MsCarrier-MscPassport-BgpMIB :: mscVrIpBgpPeerHoldTimeConfigured

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-BgpMIB › mscVrIpBgpPeerHoldTimeConfigured

mscVrIpBgpPeerHoldTimeConfigured

Module: Nortel-MsCarrier-MscPassport-BgpMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-BgpMIB::mscVrIpBgpPeerHoldTimeConfigured

OID (numeric): 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the maximum time in seconds, that may elapse without receiving a KEEPALIVE or UPDATE message before the connection is considered down. The hold time must be either zero or at least three seconds. If this attribute is zero, then the keepAliveConfigured attribute should also be zero, which means that periodic KEEPALIVE messages will not be sent.

What is mscVrIpBgpPeerHoldTimeConfigured?

Configures the maximum seconds allowed to pass without receiving a KEEPALIVE or UPDATE from this peer before the session is declared down, defaulting to 90 seconds; valid values are 0 or 3 and above. Setting it to zero (along with the keepalive interval) disables periodic keepalives.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BgpMIB::mscVrIpBgpPeerHoldTimeConfigured

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BgpMIB::mscVrIpBgpPeerHoldTimeConfigured.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.4.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscVrIpBgpPeerHoldTimeConfigured.1

Start monitoring Nortel MsCarrier MscPassport switch/router (BGP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BgpMIB::mscVrIpBgpPeerHoldTimeConfigured OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch/router (BGP) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.100mscVrNortel-MsCarrier-MscPassport-VirtualRouterMIB
1.3.6.1.4.1.562.36.2.1.100.6mscVrIpNortel-MsCarrier-MscPassport-IpMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.100.6.21mscVrIpBgpNortel-MsCarrier-MscPassport-BgpMIB
1.3.6.1.4.1.562.36.2.1.100.6.21.2mscVrIpBgpPeerNortel-MsCarrier-MscPassport-BgpMIB
1.3.6.1.4.1.562.36.2.1.100.6.21.2.10mscVrIpBgpPeerProvTableNortel-MsCarrier-MscPassport-BgpMIB
1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1mscVrIpBgpPeerProvEntryNortel-MsCarrier-MscPassport-BgpMIB
1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.4mscVrIpBgpPeerHoldTimeConfiguredNortel-MsCarrier-MscPassport-BgpMIB