Nortel-Magellan-Passport-DpnRoutingMIB

All MIBs › Nortel-Magellan-Passport-DpnRoutingMIB

Category: IP Routing

Description: Manages Nortel Magellan Passport DPN distributed packet network routing protocol configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-Magellan-Passport-DpnRoutingMIB?

This Nortel Magellan Passport module manages DPN (Distributed Packet Network) routing protocol configuration on Passport platforms, a legacy Nortel packet-switching routing scheme used for X.25-style packet network services. It exposes routing provisioning tables (rtgDpnProvTable) and row-status tables (rtgDpnRowStatusTable) that define logical network numbers, routing IDs, and module IDs used to identify and provision DPN routing instances on the switch. Its monitoring role is routing configuration verification: confirming DPN routing components are correctly provisioned with the right logical network number and routing ID, and that their row status is active, necessary for packets to be correctly routed across the DPN network fabric. As with other Passport modules it follows the shared component-name/storage-type/row-status conventions used across the Magellan Passport MIB family, indicating a common underlying management framework rather than an independent standard. It was deployed on Nortel Magellan Passport switches supporting legacy DPN/X.25 packet-switched data services in carrier networks. Engineers can download the Nortel-Magellan-Passport-DpnRoutingMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-DpnRoutingMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Magellan Passport DPN/X.25 packet switch

Monitoring Examples

An operator would poll rtgDpnProvTable (rtgDpnProvEntry) to verify the rtgDpnLogicalNetworkNumber and rtgDpnRoutingId configured for a DPN routing instance, and check rtgDpnRowStatusTable to confirm the routing component's row is active rather than stuck provisioning. An incorrect rtgDpnModuleId or a non-active row status would explain packets failing to route correctly through that DPN routing entity.

What Can Be Monitored

DPN routing provisioning
logical network number
routing ID
row status of routing components

Imported Objects

From Nortel-Magellan-Passport-BaseRoutingMIB

rtg	OBJECT-IDENTITY
rtgIndex	OBJECT-TYPE

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

DisplayString
Integer32
PassportCounter64
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

AsciiStringIndex
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

passportMIBs

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
rtgDpn	1.3.6.1.4.1.562.2.4.1.40.4
rtgDpnRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.1		not-accessible	This entry controls the addition and deletion of rtgDpn components.
rtgDpnRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.1.1		not-accessible	A single entry in the table represents a single rtgDpn component.
ROW rtgDpnRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of rtgDpn components. These components cannot be added nor deleted.
STR rtgDpnComponentName	1.3.6.1.4.1.562.2.4.1.40.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnStorageType	1.3.6.1.4.1.562.2.4.1.40.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpn tables.
NON rtgDpnIndex	1.3.6.1.4.1.562.2.4.1.40.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the rtgDpn tables.
rtgDpnRid	1.3.6.1.4.1.562.2.4.1.40.4.2
rtgDpnRidRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of rtgDpnRid components.
rtgDpnRidRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.1.1		not-accessible	A single entry in the table represents a single rtgDpnRid component.
ROW rtgDpnRidRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of rtgDpnRid components. These components cannot be added nor deleted.
STR rtgDpnRidComponentName	1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnRidStorageType	1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpnRid tables.
I32 rtgDpnRidIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.10	Integer32	not-accessible	This variable represents the index for the rtgDpnRid tables.
rtgDpnRidMid	1.3.6.1.4.1.562.2.4.1.40.4.2.2
rtgDpnRidMidRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.2.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of rtgDpnRidMid components.
rtgDpnRidMidRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1		not-accessible	A single entry in the table represents a single rtgDpnRidMid component.
ROW rtgDpnRidMidRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of rtgDpnRidMid components. These components cannot be added nor deleted.
STR rtgDpnRidMidComponentName	1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnRidMidStorageType	1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpnRidMid tables.
I32 rtgDpnRidMidIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.10	Integer32	not-accessible	This variable represents the index for the rtgDpnRidMid tables.
rtgDpnRidOperTable	1.3.6.1.4.1.562.2.4.1.40.4.2.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes is maintained by the DpnAddressPlan component to provide information about the RIDs reachable in the network.
rtgDpnRidOperEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.10.1		not-accessible	An entry in the rtgDpnRidOperTable.
U32 rtgDpnRidDpnDelayMetric	1.3.6.1.4.1.562.2.4.1.40.4.2.10.1.1	Unsigned32	read-only	This attribute indicates the minimum DPN delay metric to the destination RID. The delay metric associated with a path is computed by the routing system by translating the smallest delayMetric calculated for the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metric displayed is that of the best path to the destination. This metric is advertised to neighbor RMs and Passports in a different RID subnet. A metric value of 255 means the RID is unreachable in the delay class of service. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID. A metric value of 252 indicates that the destination RID is that of a Network Module (NM).
U32 rtgDpnRidDpnTputMetric	1.3.6.1.4.1.562.2.4.1.40.4.2.10.1.2	Unsigned32	read-only	This attribute indicates the minimum DPN throughput metric to the destination RID. The throughput metric associated with a path is computed by the routing system by translating the smallest tputMetric calculated for the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metric displayed is that of the best path to the destination. This metric is advertised to neighbor RMs and Passports in a different RID subnet. A metric value of 255 means the RID is unreachable in the throughput class of service. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID.
rtgDpnRidDelayNextHopLinkGroupsTable	1.3.6.1.4.1.562.2.4.1.40.4.2.226		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination RID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an RM. If no link groups are listed then the destination is not reachable in the delay class of service (except in the case of the local node's RID). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
rtgDpnRidDelayNextHopLinkGroupsEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.226.1		not-accessible	An entry in the rtgDpnRidDelayNextHopLinkGroupsTable.
I32 rtgDpnRidDelayNextHopLinkGroupsIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.226.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnRidDelayNextHopLinkGroupsTable.
NUM rtgDpnRidDelayNextHopLinkGroupsValue	1.3.6.1.4.1.562.2.4.1.40.4.2.226.1.2	RowPointer	read-only	This variable represents an individual value for the rtgDpnRidDelayNextHopLinkGroupsTable.
rtgDpnRidTputNextHopLinkGroupsTable	1.3.6.1.4.1.562.2.4.1.40.4.2.227		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination RID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an RM. If no link groups are listed then the destination is not reachable in the throughput class of service (except in the case of the local node's RID). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
rtgDpnRidTputNextHopLinkGroupsEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.227.1		not-accessible	An entry in the rtgDpnRidTputNextHopLinkGroupsTable.
I32 rtgDpnRidTputNextHopLinkGroupsIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.227.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnRidTputNextHopLinkGroupsTable.
NUM rtgDpnRidTputNextHopLinkGroupsValue	1.3.6.1.4.1.562.2.4.1.40.4.2.227.1.2	RowPointer	read-only	This variable represents an individual value for the rtgDpnRidTputNextHopLinkGroupsTable.
rtgDpnRidDelayPathTrafficProportionsTable	1.3.6.1.4.1.562.2.4.1.40.4.2.328		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs).
rtgDpnRidDelayPathTrafficProportionsEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.328.1		not-accessible	An entry in the rtgDpnRidDelayPathTrafficProportionsTable.
I32 rtgDpnRidDelayPathTrafficProportionsIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.328.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnRidDelayPathTrafficProportionsTable.
U32 rtgDpnRidDelayPathTrafficProportionsValue	1.3.6.1.4.1.562.2.4.1.40.4.2.328.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnRidDelayPathTrafficProportionsTable.
rtgDpnRidTputPathTrafficProportionsTable	1.3.6.1.4.1.562.2.4.1.40.4.2.329		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs).
rtgDpnRidTputPathTrafficProportionsEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.329.1		not-accessible	An entry in the rtgDpnRidTputPathTrafficProportionsTable.
I32 rtgDpnRidTputPathTrafficProportionsIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.329.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnRidTputPathTrafficProportionsTable.
U32 rtgDpnRidTputPathTrafficProportionsValue	1.3.6.1.4.1.562.2.4.1.40.4.2.329.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnRidTputPathTrafficProportionsTable.
rtgDpnRidDelayMetricTable	1.3.6.1.4.1.562.2.4.1.40.4.2.339		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay metrics of up to two paths to the destination RID. The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links in the path to the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the RID is unreachable in the delay class of service. A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID. Metric values of 2147483646 indicate that the destination RID is that of a Network Module (NM).
rtgDpnRidDelayMetricEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.339.1		not-accessible	An entry in the rtgDpnRidDelayMetricTable.
I32 rtgDpnRidDelayMetricIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.339.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnRidDelayMetricTable.
U32 rtgDpnRidDelayMetricValue	1.3.6.1.4.1.562.2.4.1.40.4.2.339.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnRidDelayMetricTable.
rtgDpnRidTputMetricTable	1.3.6.1.4.1.562.2.4.1.40.4.2.340		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput metrics of up to two paths to the destination RID. The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links in the path to the destination. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the RID is unreachable in the throughput class of service. A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID.
rtgDpnRidTputMetricEntry	1.3.6.1.4.1.562.2.4.1.40.4.2.340.1		not-accessible	An entry in the rtgDpnRidTputMetricTable.
I32 rtgDpnRidTputMetricIndex	1.3.6.1.4.1.562.2.4.1.40.4.2.340.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnRidTputMetricTable.
U32 rtgDpnRidTputMetricValue	1.3.6.1.4.1.562.2.4.1.40.4.2.340.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnRidTputMetricTable.
rtgDpnMid	1.3.6.1.4.1.562.2.4.1.40.4.3
rtgDpnMidRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.3.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of rtgDpnMid components.
rtgDpnMidRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.1.1		not-accessible	A single entry in the table represents a single rtgDpnMid component.
ROW rtgDpnMidRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of rtgDpnMid components. These components cannot be added nor deleted.
STR rtgDpnMidComponentName	1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnMidStorageType	1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpnMid tables.
I32 rtgDpnMidIndex	1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.10	Integer32	not-accessible	This variable represents the index for the rtgDpnMid tables.
rtgDpnMidOperTable	1.3.6.1.4.1.562.2.4.1.40.4.3.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes is maintained by DpnAddressPlan component to provide information about the MIDs reachable, or once reachable, through the local RID subnet.
rtgDpnMidOperEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.10.1		not-accessible	An entry in the rtgDpnMidOperTable.
U32 rtgDpnMidSubstituteRid	1.3.6.1.4.1.562.2.4.1.40.4.3.10.1.3	Unsigned32	read-only	This attribute indicates the substitute RID in use for the MID. This RID will be substituted for the RID in DPN packets destined to the local node's RID and the MID in question when the MID is unreachable (when, for example, all links to an AM from the Passport subnet are down). It will also be used in the case where the path through the substitute RID is better than that available through the subnet's connection to the cluster containing the AM MID. Substitute RIDs are learned from AM clusters that are supported by two RIDs (the Passport subnet's RID and another one). The operator can check this value to determine if a possible back up route to an AM exists. When there are no delayNextHopLinkGroups or tputNextHopLinkGroups shown to reach the MID, the substitute RID will be used. A value of 128 indicates that no substitute RID is known.
rtgDpnMidDelayNextHopLinkGroupsTable	1.3.6.1.4.1.562.2.4.1.40.4.3.228		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination MID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an AM. If no link groups are listed then the destination is not reachable in the delay class of service (except in the case of the local node's MID, or when a substitute RID path is available). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
rtgDpnMidDelayNextHopLinkGroupsEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.228.1		not-accessible	An entry in the rtgDpnMidDelayNextHopLinkGroupsTable.
I32 rtgDpnMidDelayNextHopLinkGroupsIndex	1.3.6.1.4.1.562.2.4.1.40.4.3.228.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnMidDelayNextHopLinkGroupsTable.
NUM rtgDpnMidDelayNextHopLinkGroupsValue	1.3.6.1.4.1.562.2.4.1.40.4.3.228.1.2	RowPointer	read-only	This variable represents an individual value for the rtgDpnMidDelayNextHopLinkGroupsTable.
rtgDpnMidTputNextHopLinkGroupsTable	1.3.6.1.4.1.562.2.4.1.40.4.3.229		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the destination MID. DPN traffic will be spread across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to an AM. If no link groups are listed then the destination is not reachable in the throughput class of service (except in the case of the local node's MID, or when a substitute RID path is available). Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
rtgDpnMidTputNextHopLinkGroupsEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.229.1		not-accessible	An entry in the rtgDpnMidTputNextHopLinkGroupsTable.
I32 rtgDpnMidTputNextHopLinkGroupsIndex	1.3.6.1.4.1.562.2.4.1.40.4.3.229.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnMidTputNextHopLinkGroupsTable.
NUM rtgDpnMidTputNextHopLinkGroupsValue	1.3.6.1.4.1.562.2.4.1.40.4.3.229.1.2	RowPointer	read-only	This variable represents an individual value for the rtgDpnMidTputNextHopLinkGroupsTable.
rtgDpnMidDelayMetricTable	1.3.6.1.4.1.562.2.4.1.40.4.3.330		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay metrics of up to two paths to the destination MID. The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links (or estimated delays for links to AMs) in the path to the destination. It is computed for every possible path to the destination and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the MID is unreachable in the delay class of service (though it might still be reachable via its substitute RID). A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination.A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's MID.
rtgDpnMidDelayMetricEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.330.1		not-accessible	An entry in the rtgDpnMidDelayMetricTable.
I32 rtgDpnMidDelayMetricIndex	1.3.6.1.4.1.562.2.4.1.40.4.3.330.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnMidDelayMetricTable.
U32 rtgDpnMidDelayMetricValue	1.3.6.1.4.1.562.2.4.1.40.4.3.330.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnMidDelayMetricTable.
rtgDpnMidTputMetricTable	1.3.6.1.4.1.562.2.4.1.40.4.3.331		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput metrics to the destination MID. The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links (or estimated bandwidth for links to AMs) in the path to the destination. It is computed for every possible path to the destination and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the MID is unreachable in the throughput class of service (though it might still be reachable via its substitute RID). A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination. This would be the case for the local node's RID.
rtgDpnMidTputMetricEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.331.1		not-accessible	An entry in the rtgDpnMidTputMetricTable.
I32 rtgDpnMidTputMetricIndex	1.3.6.1.4.1.562.2.4.1.40.4.3.331.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnMidTputMetricTable.
U32 rtgDpnMidTputMetricValue	1.3.6.1.4.1.562.2.4.1.40.4.3.331.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnMidTputMetricTable.
rtgDpnMidDelayPathTrafficProportionsTable	1.3.6.1.4.1.562.2.4.1.40.4.3.332		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs).
rtgDpnMidDelayPathTrafficProportionsEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.332.1		not-accessible	An entry in the rtgDpnMidDelayPathTrafficProportionsTable.
I32 rtgDpnMidDelayPathTrafficProportionsIndex	1.3.6.1.4.1.562.2.4.1.40.4.3.332.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnMidDelayPathTrafficProportionsTable.
U32 rtgDpnMidDelayPathTrafficProportionsValue	1.3.6.1.4.1.562.2.4.1.40.4.3.332.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnMidDelayPathTrafficProportionsTable.
rtgDpnMidTputPathTrafficProportionsTable	1.3.6.1.4.1.562.2.4.1.40.4.3.333		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs).
rtgDpnMidTputPathTrafficProportionsEntry	1.3.6.1.4.1.562.2.4.1.40.4.3.333.1		not-accessible	An entry in the rtgDpnMidTputPathTrafficProportionsTable.
I32 rtgDpnMidTputPathTrafficProportionsIndex	1.3.6.1.4.1.562.2.4.1.40.4.3.333.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnMidTputPathTrafficProportionsTable.
U32 rtgDpnMidTputPathTrafficProportionsValue	1.3.6.1.4.1.562.2.4.1.40.4.3.333.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnMidTputPathTrafficProportionsTable.
rtgDpnCs	1.3.6.1.4.1.562.2.4.1.40.4.4
rtgDpnCsRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.4.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of rtgDpnCs components.
rtgDpnCsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.4.1.1		not-accessible	A single entry in the table represents a single rtgDpnCs component.
ROW rtgDpnCsRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of rtgDpnCs components. These components cannot be added nor deleted.
STR rtgDpnCsComponentName	1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnCsStorageType	1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpnCs tables.
INT rtgDpnCsIndex	1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.10	INTEGER	not-accessible	This variable represents the index for the rtgDpnCs tables.
rtgDpnCsDelayNextHopLinkGroupsTable	1.3.6.1.4.1.562.2.4.1.40.4.4.230		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay link group, or groups, that are being used to reach a neighbor which is the next hop in the path to the Call Server Resource Module (CSRM) supporting the server. DPN server traffic will be load shared across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest delay metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to a CSRM. If no link groups are listed then the server is not reachable in the delay class of service. Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
rtgDpnCsDelayNextHopLinkGroupsEntry	1.3.6.1.4.1.562.2.4.1.40.4.4.230.1		not-accessible	An entry in the rtgDpnCsDelayNextHopLinkGroupsTable.
I32 rtgDpnCsDelayNextHopLinkGroupsIndex	1.3.6.1.4.1.562.2.4.1.40.4.4.230.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnCsDelayNextHopLinkGroupsTable.
NUM rtgDpnCsDelayNextHopLinkGroupsValue	1.3.6.1.4.1.562.2.4.1.40.4.4.230.1.2	RowPointer	read-only	This variable represents an individual value for the rtgDpnCsDelayNextHopLinkGroupsTable.
rtgDpnCsTputNextHopLinkGroupsTable	1.3.6.1.4.1.562.2.4.1.40.4.4.231		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput link group, or groups, that are being used to reach a neighbor which is either the next hop in the path to the Call Server Resource Module (CSRM) supporting the server. DPN server traffic will be load shared across the links, in up to two link groups, when available. The link groups selected are those associated with the two loop-free paths with the lowest throughput metrics to the destination. The link group can be that of either a Passport node interconnection or a gateway to the CSRM. If no link groups are listed then the server is not reachable in the throughput class of service. Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.
rtgDpnCsTputNextHopLinkGroupsEntry	1.3.6.1.4.1.562.2.4.1.40.4.4.231.1		not-accessible	An entry in the rtgDpnCsTputNextHopLinkGroupsTable.
I32 rtgDpnCsTputNextHopLinkGroupsIndex	1.3.6.1.4.1.562.2.4.1.40.4.4.231.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnCsTputNextHopLinkGroupsTable.
NUM rtgDpnCsTputNextHopLinkGroupsValue	1.3.6.1.4.1.562.2.4.1.40.4.4.231.1.2	RowPointer	read-only	This variable represents an individual value for the rtgDpnCsTputNextHopLinkGroupsTable.
rtgDpnCsDelayMetricTable	1.3.6.1.4.1.562.2.4.1.40.4.4.334		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the delay metrics of up to two paths to the server supported on a Call Server Resource Module (CSRM). The delay metric associated with a path is computed by the routing system based on the sum of the delays associated with the links in the path to the CSRM supporting the server. It is computed for every possible path to the server and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with lower delay facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the server is unreachable in the delay class of service. A metric value of 2147483647 for the second path only means that there is only one viable delay path to the destination. A value of 0 indicates that no cost is associated with the path to the destination.
rtgDpnCsDelayMetricEntry	1.3.6.1.4.1.562.2.4.1.40.4.4.334.1		not-accessible	An entry in the rtgDpnCsDelayMetricTable.
I32 rtgDpnCsDelayMetricIndex	1.3.6.1.4.1.562.2.4.1.40.4.4.334.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnCsDelayMetricTable.
U32 rtgDpnCsDelayMetricValue	1.3.6.1.4.1.562.2.4.1.40.4.4.334.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnCsDelayMetricTable.
rtgDpnCsTputMetricTable	1.3.6.1.4.1.562.2.4.1.40.4.4.335		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the throughput metrics of up to two paths to reach the server supported on a Call Server Resource Module (CSRM). The throughput metric associated with a path is computed by the routing system based on the sum of the bandwidth associated with the links in the path to the CSRM supporting the server. It is computed for every possible path to the server and is used by the DpnAddressPlan component for path comparison purposes. A path with a lower metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities. The metrics displayed are those of the paths being used to reach the destination. Metric values of 2147483647 for both paths means the server is unreachable in the throughput class of service. A metric value of 2147483647 for the second path only means that there is only one viable throughput path to the destination. A value of 0 indicates that no cost is associated with the path to the destination.
rtgDpnCsTputMetricEntry	1.3.6.1.4.1.562.2.4.1.40.4.4.335.1		not-accessible	An entry in the rtgDpnCsTputMetricTable.
I32 rtgDpnCsTputMetricIndex	1.3.6.1.4.1.562.2.4.1.40.4.4.335.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnCsTputMetricTable.
U32 rtgDpnCsTputMetricValue	1.3.6.1.4.1.562.2.4.1.40.4.4.335.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnCsTputMetricTable.
rtgDpnCsDelayPathTrafficProportionsTable	1.3.6.1.4.1.562.2.4.1.40.4.4.336		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total delay traffic flows to the destination which are sent over each delay path. These percentages are achieved when there is a large number of virtual circuits (VCs).
rtgDpnCsDelayPathTrafficProportionsEntry	1.3.6.1.4.1.562.2.4.1.40.4.4.336.1		not-accessible	An entry in the rtgDpnCsDelayPathTrafficProportionsTable.
I32 rtgDpnCsDelayPathTrafficProportionsIndex	1.3.6.1.4.1.562.2.4.1.40.4.4.336.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnCsDelayPathTrafficProportionsTable.
U32 rtgDpnCsDelayPathTrafficProportionsValue	1.3.6.1.4.1.562.2.4.1.40.4.4.336.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnCsDelayPathTrafficProportionsTable.
rtgDpnCsTputPathTrafficProportionsTable	1.3.6.1.4.1.562.2.4.1.40.4.4.337		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This attribute indicates the target percentages of the total throughput traffic flows to the destination which are sent over each throughput path. These percentages are achieved when there is a large number of virtual circuits (VCs).
rtgDpnCsTputPathTrafficProportionsEntry	1.3.6.1.4.1.562.2.4.1.40.4.4.337.1		not-accessible	An entry in the rtgDpnCsTputPathTrafficProportionsTable.
I32 rtgDpnCsTputPathTrafficProportionsIndex	1.3.6.1.4.1.562.2.4.1.40.4.4.337.1.1	Integer32	not-accessible	This variable represents the index for the rtgDpnCsTputPathTrafficProportionsTable.
U32 rtgDpnCsTputPathTrafficProportionsValue	1.3.6.1.4.1.562.2.4.1.40.4.4.337.1.2	Unsigned32	read-only	This variable represents an individual value for the rtgDpnCsTputPathTrafficProportionsTable.
rtgDpnLg	1.3.6.1.4.1.562.2.4.1.40.4.5
rtgDpnLgRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.5.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of rtgDpnLg components.
rtgDpnLgRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.5.1.1		not-accessible	A single entry in the table represents a single rtgDpnLg component.
ROW rtgDpnLgRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of rtgDpnLg components. These components cannot be added nor deleted.
STR rtgDpnLgComponentName	1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnLgStorageType	1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpnLg tables.
STR rtgDpnLgIndex	1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.10	AsciiStringIndex	not-accessible	This variable represents the index for the rtgDpnLg tables.
rtgDpnLgOperTable	1.3.6.1.4.1.562.2.4.1.40.4.5.3		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes provides information about the gateways in use to reach Passports, RMs and AMs connected to this Passport node.
rtgDpnLgOperEntry	1.3.6.1.4.1.562.2.4.1.40.4.5.3.1		not-accessible	An entry in the rtgDpnLgOperTable.
INT rtgDpnLgFarEndType	1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.1	INTEGER	read-only	This attribute indicates the type of the far end module (EM, AM or RM).
U32 rtgDpnLgFarEndRid	1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.2	Unsigned32	read-only	This attribute indicates the far end neighbor RID. If the neighbor is an AM then the RID is that of the Passport node.
U32 rtgDpnLgFarEndMid	1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.3	Unsigned32	read-only	This attribute indicates the far end neighbor MID.
U32 rtgDpnLgDelayMetric	1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.4	Unsigned32	read-only	This attribute indicates the delay metric calculated for the link group. If the type of the far end switch is AM, the delay metric is calculated for MID routing, ranging from 1 to 2147483647. If the type of the far end switch is EM or RM, the delay metric, ranging from 1 to 255, is based on the measured round trip delay of the delay preferred links in the group. A link group with a low metric value is preferable to one with a higher value as it is associated with lower delay facilities.
U32 rtgDpnLgTputMetric	1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.5	Unsigned32	read-only	This attribute indicates the throughput metric calculated for the link group. If the type of the far end switch is AM, the throughput metric is calculated for MID routing, ranging from 1 to 2147483647. If the type of the far end switch is EM or RM, the throughput metric, ranging from 1 to 255, is based on the sum of the bandwidth available for all links in the group. A link group with a low metric value is preferable to one with a higher value as it is associated with higher bandwidth facilities.
rtgDpnLpStats	1.3.6.1.4.1.562.2.4.1.40.4.6
rtgDpnLpStatsRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.6.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of rtgDpnLpStats components.
rtgDpnLpStatsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.6.1.1		not-accessible	A single entry in the table represents a single rtgDpnLpStats component.
ROW rtgDpnLpStatsRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of rtgDpnLpStats components. These components cannot be added nor deleted.
STR rtgDpnLpStatsComponentName	1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnLpStatsStorageType	1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpnLpStats tables.
I32 rtgDpnLpStatsIndex	1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.10	Integer32	not-accessible	This variable represents the index for the rtgDpnLpStats tables.
rtgDpnLpStatsFwdStatsTable	1.3.6.1.4.1.562.2.4.1.40.4.6.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group of attributes provides DPN packet forwarding statistics for this LP. The statistics can be used to monitor the connectionless traffic profile on this LP.
rtgDpnLpStatsFwdStatsEntry	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1		not-accessible	An entry in the rtgDpnLpStatsFwdStatsTable.
NUM rtgDpnLpStatsTotalPackets	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.1	PassportCounter64	read-only	This attribute counts the total number of delay and throughput packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnLpStatsThroughputPackets	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.2	PassportCounter64	read-only	This attribute counts the throughput packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnLpStatsDelayPackets	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.3	PassportCounter64	read-only	This attribute counts the delay packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnLpStatsNormalReliabilityPackets	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.4	PassportCounter64	read-only	This attribute counts the normal reliability packets handled by DPN packet forwarding on this LP when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnLpStatsHighReliabilityPackets	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.5	PassportCounter64	read-only	This attribute counts the high reliability packets handled by DPN packet forwarding on this LP when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnLpStatsDiscardNoRoute	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.6	PassportCounter64	read-only	This attribute counts the packets discarded when DPN packet forwarding has failed to find a route to forward the packets on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnLpStatsInterruptingPackets	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.7	PassportCounter64	read-only	This attribute counts the total number of multimedia packets handled by DPN packet forwarding on this LP. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnLpStatsDiscardLpCongested	1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.8	PassportCounter64	read-only	This attribute counts the packets that have been discarded by DPN packet forwarding, on the entire module, due to congestion on this LP. This value is the sum of the packets discarded by all LPs due to insufficient shared memory on this one. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
rtgDpnRidFilter	1.3.6.1.4.1.562.2.4.1.40.4.7
rtgDpnRidFilterRowStatusTable	1.3.6.1.4.1.562.2.4.1.40.4.7.1		not-accessible	This entry controls the addition and deletion of rtgDpnRidFilter components.
rtgDpnRidFilterRowStatusEntry	1.3.6.1.4.1.562.2.4.1.40.4.7.1.1		not-accessible	A single entry in the table represents a single rtgDpnRidFilter component.
ROW rtgDpnRidFilterRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of rtgDpnRidFilter components. These components can be added and deleted.
STR rtgDpnRidFilterComponentName	1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO rtgDpnRidFilterStorageType	1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the rtgDpnRidFilter tables.
I32 rtgDpnRidFilterIndex	1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.10	Integer32	not-accessible	This variable represents the index for the rtgDpnRidFilter tables.
rtgDpnRidFilterImportRidListTable	1.3.6.1.4.1.562.2.4.1.40.4.7.303		not-accessible	This attribute specifies the list of RIDs whose reachability information will be accepted from the instance RID. Information about RIDs which do not appear in this list will be ignored and this node considers those RIDs to be unreachable from the instance RID. Note that this also applies to the instance RID itself, that is, if the instance RID does not appear in the import list, this node considers the instance RID to be unreachable from the instance RID. By default this list contains all valid RIDs, meaning that information about all RIDs will be accepted from the instance RID. When this list is empty, no RID information is accepted from the instance RID, therefore, no RID traffic will be routed to it. A warning is generated when an empty import list is detected. RID 127 is the Network Services Sharing (NSS) RID, used to identify DPN-100 nodes running call servers which can be used for remote call processing. This RID can be filtered like any other using the import RID list.
rtgDpnRidFilterImportRidListEntry	1.3.6.1.4.1.562.2.4.1.40.4.7.303.1		not-accessible	An entry in the rtgDpnRidFilterImportRidListTable.
I32 rtgDpnRidFilterImportRidListValue	1.3.6.1.4.1.562.2.4.1.40.4.7.303.1.1	Integer32	read-write	This variable represents both the value and the index for the rtgDpnRidFilterImportRidListTable.
ROW rtgDpnRidFilterImportRidListRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.7.303.1.2	RowStatus	write-only	This variable is used to control the addition and deletion of individual values of the rtgDpnRidFilterImportRidListTable.
rtgDpnRidFilterExportRidListTable	1.3.6.1.4.1.562.2.4.1.40.4.7.304		not-accessible	This attribute specifies the list of RIDs whose true reachability is advertised to the instance RID. RIDs which do not appear in this list are advertised to the instance RID as being unreachable from this node. By default, this list contains all valid RIDs, meaning that true reachability information for all RIDs is advertised to the instance RID. When this list is empty, all RIDs will be advertised to the instance RID as unreachable, including this node's own RID, therefore the instance RID will not route any RID traffic to this RID. A warning is generated when an empty export list is detected. RID 127 is the Network Services Sharing (NSS) RID, used to identify DPN-100 nodes running call servers which can be used for remote call processing. This RID can be filtered like any other using the import RID list.
rtgDpnRidFilterExportRidListEntry	1.3.6.1.4.1.562.2.4.1.40.4.7.304.1		not-accessible	An entry in the rtgDpnRidFilterExportRidListTable.
I32 rtgDpnRidFilterExportRidListValue	1.3.6.1.4.1.562.2.4.1.40.4.7.304.1.1	Integer32	read-write	This variable represents both the value and the index for the rtgDpnRidFilterExportRidListTable.
ROW rtgDpnRidFilterExportRidListRowStatus	1.3.6.1.4.1.562.2.4.1.40.4.7.304.1.2	RowStatus	write-only	This variable is used to control the addition and deletion of individual values of the rtgDpnRidFilterExportRidListTable.
rtgDpnProvTable	1.3.6.1.4.1.562.2.4.1.40.4.11		not-accessible	This group contains the provisioning data for the DpnAddressPlan. Attributes in this group must be set to allow the DpnAddressPlan component to function properly.
rtgDpnProvEntry	1.3.6.1.4.1.562.2.4.1.40.4.11.1		not-accessible	An entry in the rtgDpnProvTable.
U32 rtgDpnLogicalNetworkNumber	1.3.6.1.4.1.562.2.4.1.40.4.11.1.1	Unsigned32	read-only	This attribute specifies the Logical Network Number for the DpnAddressPlan. Since only one instance of this component can exist, this value is always set to one. It is provided here to be consistent with other address plans and so that it can be queried.
U32 rtgDpnRoutingId	1.3.6.1.4.1.562.2.4.1.40.4.11.1.2	Unsigned32	read-write	This attribute specifies the Routing Identifier (RID) associated with the Passport node. The RID is used to identify a group of one or more interconnected Passport nodes (called a subnet) supporting the transport of DPN traffic. Its value must be the same as that of the other Passport nodes in this subnet and different from that of all RMs and other Passport subnets in the network. The routingId must be set when a DpnAddressPlan component is configured on an Passport node. Changing the value of the routingId will cause the node to restart.
U32 rtgDpnModuleId	1.3.6.1.4.1.562.2.4.1.40.4.11.1.3	Unsigned32	read-write	This attribute specifies the Module Identifier (MID) associated with the Passport node. The MID is used to identify an Passport node supporting the transport of DPN traffic. Its value must be different from that of all MIDs assigned to Passport nodes in this RID subnet (interconnected Passport nodes sharing a RID) and AMs in clusters supported by this subnet. If routing zones are used, it must also be unique from all other MIDs in this zone. The moduleId must be set when a DpnAddressPlan component is configured on an Passport node. Changing the value of the moduleId will cause the node to restart.
U32 rtgDpnDelayMetricCutOff	1.3.6.1.4.1.562.2.4.1.40.4.11.1.4	Unsigned32	read-write	This attribute specifies the delay metric value beyond which a destination RID should be considered unreachable. That is, if a delay metric to a RID is equal to or greater than this value then the RID is considered to be unreachable in the delay class of service. Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario. Care must be taken to ensure that the value chosen is big enough for the longest delay path in the network. This attribute is optional; a default of 128 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value.
U32 rtgDpnThroughputMetricCutOff	1.3.6.1.4.1.562.2.4.1.40.4.11.1.5	Unsigned32	read-write	This attribute specifies the throughput metric value beyond which a destination RID should be considered unreachable. That is, if a throughput metric to a RID is equal to or greater than this value then the RID will be considered to be unreachable in the throughput class of service. Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario.Care must be taken to ensure that the value chosen is big enough for the longest throughput path in the network. This attribute is optional; a default of 245 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value.
INT rtgDpnForwardingPolicy	1.3.6.1.4.1.562.2.4.1.40.4.11.1.6	INTEGER	read-write	This attribute specifies the forwarding policy used by packet forwarding to handle DPN traffic on a Passport module. When this attribute is set to loadshare, DPN traffic is shared among preferred links in a link group in proportion to the available bandwidth on each link; the traffic is not forwarded in an order- preserved manner and needs resequencing at the destination, but the available bandwidth in a link group is utilized efficiently. When this attribute is set to loadspread, DPN traffic is forwarded in an order-preserved manner along a randomly selected route; the traffic sticks to a particular link in a link group, and will not spill over to other links in the link group unless there is congestion on the selected link. When this attribute is set to loadspreadFast, DPN traffic is forwarded in an order-preserved manner along a randomly selected route; the traffic sticks to a particular link in a link group, and will not spill over to other links in the link group. Choosing this value may improve throughput but traffic may be discarded in the presence of congestion. It is recommended that all nodes in the network be provisioned with the same forwarding policy.
U32 rtgDpnDelayMetricRangeBoundary	1.3.6.1.4.1.562.2.4.1.40.4.11.1.7	Unsigned32	read-write	This attribute specifies the total path delay metric below which the variance value specified for delay COS and a low metric range is used, and at or above which the variance value specified for delay COS and a high metric range is used. This attribute defaults to 0, so that the variance value specified for delay COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for delay COS and a low metric range is used for all delay paths.
U32 rtgDpnTputMetricRangeBoundary	1.3.6.1.4.1.562.2.4.1.40.4.11.1.8	Unsigned32	read-write	This attribute specifies the total path throughput metric below which the variance value specified for throughput COS and a low metric range is used, and at or above which the variance value specified for throughput COS and a high metric range is used. This attribute defaults to 0, so that the variance value specified for throughput COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for throughput COS and a low metric range is used for all throughput paths.
rtgDpnConStatsTable	1.3.6.1.4.1.562.2.4.1.40.4.13		not-accessible	This group of attributes provides statistics about the behavior of the DpnAddressPlan component. The statistics concern the distribution of routing information, required to support the routing of DPN traffic, to all Passport nodes in the RID subnet.
rtgDpnConStatsEntry	1.3.6.1.4.1.562.2.4.1.40.4.13.1		not-accessible	An entry in the rtgDpnConStatsTable.
U32 rtgDpnControlPktTx	1.3.6.1.4.1.562.2.4.1.40.4.13.1.1	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packets, originating from this node, sent to other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The Packets received from a neighbor node and forwarded to other neighbors are not counted. The counter wraps around to zero when the maximum value is reached.
U32 rtgDpnControlPktRx	1.3.6.1.4.1.562.2.4.1.40.4.13.1.2	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packets received from other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached.
U32 rtgDpnControlBytesTx	1.3.6.1.4.1.562.2.4.1.40.4.13.1.3	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packet bytes, originating from the node, sent to other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. Packet bytes received from a neighbor node and forwarded to other neighbors are not counted. The counter wraps around to zero when the maximum value is reached.
U32 rtgDpnControlBytesRx	1.3.6.1.4.1.562.2.4.1.40.4.13.1.4	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packet bytes received from other Passport nodes in the RID subnet. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached.
U32 rtgDpnOutOfSequencePkt	1.3.6.1.4.1.562.2.4.1.40.4.13.1.5	Unsigned32	read-only	This attribute counts the total number of internal Passport DPN control packets received and rejected. These packets contained old sequence numbers. The packets contain DPN routing information required by the DpnAddressPlan component to support the transport of DPN traffic. The counter wraps around to zero when the maximum value is reached.
rtgDpnFwdStatsTable	1.3.6.1.4.1.562.2.4.1.40.4.14		not-accessible	This group of attributes provides statistics for the traffic handled by DPN packet forwarding on this module. The statistics can be used to monitor the connectionless traffic profile on this module.
rtgDpnFwdStatsEntry	1.3.6.1.4.1.562.2.4.1.40.4.14.1		not-accessible	An entry in the rtgDpnFwdStatsTable.
NUM rtgDpnTotalPackets	1.3.6.1.4.1.562.2.4.1.40.4.14.1.1	PassportCounter64	read-only	This attribute counts the total number of delay and throughput packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnThroughputPackets	1.3.6.1.4.1.562.2.4.1.40.4.14.1.2	PassportCounter64	read-only	This attribute counts the throughput packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnDelayPackets	1.3.6.1.4.1.562.2.4.1.40.4.14.1.3	PassportCounter64	read-only	This attribute counts the delay packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnNormalReliabilityPackets	1.3.6.1.4.1.562.2.4.1.40.4.14.1.4	PassportCounter64	read-only	This attribute counts the normal reliability packets handled by DPN packet forwarding on this module when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnHighReliabilityPackets	1.3.6.1.4.1.562.2.4.1.40.4.14.1.5	PassportCounter64	read-only	This attribute counts the high reliability packets handled by DPN packet forwarding on this module when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnDiscardNoRoute	1.3.6.1.4.1.562.2.4.1.40.4.14.1.6	PassportCounter64	read-only	This attribute counts the packets discarded when DPN packet forwarding has failed to find a route to forward the packets on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnInterruptingPackets	1.3.6.1.4.1.562.2.4.1.40.4.14.1.7	PassportCounter64	read-only	This attribute counts the total number of multimedia packets handled by DPN packet forwarding on this module. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
NUM rtgDpnDiscardLpCongested	1.3.6.1.4.1.562.2.4.1.40.4.14.1.8	PassportCounter64	read-only	This attribute counts the packets that have been discarded by packet forwarding due to LP congestion on this module. A packet encounters LP congestion when there is insufficient shared memory. Note that DPRS packets leaving the network at this module are not counted. The counter wraps to zero when the maximum value is exceeded.
rtgDpnCallServerModuleRidsTable	1.3.6.1.4.1.562.2.4.1.40.4.232		not-accessible	This attribute indicates the RIDs of the Call Server Resource Modules (CSRMs) currently in use to support Call Server functions, such as SCR and DCR, for the Passport subnet. Up to two CSRMs can be in use to support such Call Server functions. Note that packets destined to Call Server functions are routed to the closest CSRM supporting the required server functionality.
rtgDpnCallServerModuleRidsEntry	1.3.6.1.4.1.562.2.4.1.40.4.232.1		not-accessible	An entry in the rtgDpnCallServerModuleRidsTable.
I32 rtgDpnCallServerModuleRidsValue	1.3.6.1.4.1.562.2.4.1.40.4.232.1.1	Integer32	read-only	This variable represents both the value and the index for the rtgDpnCallServerModuleRidsTable.
rtgDpnSubnetMidsTable	1.3.6.1.4.1.562.2.4.1.40.4.233		not-accessible	This attribute indicates which of the ReachableMidInfo (Mid) components refer to MIDs which are members of the Passport subnet. This list does not include AMs connected to the subnet.
rtgDpnSubnetMidsEntry	1.3.6.1.4.1.562.2.4.1.40.4.233.1		not-accessible	An entry in the rtgDpnSubnetMidsTable.
NUM rtgDpnSubnetMidsValue	1.3.6.1.4.1.562.2.4.1.40.4.233.1.1	RowPointer	read-only	This variable represents both the value and the index for the rtgDpnSubnetMidsTable.
rtgDpnVarianceTable	1.3.6.1.4.1.562.2.4.1.40.4.343		not-accessible	This attribute specifies the variance values for high and low metric ranges, for each class of service (COS). A variance value is the maximum allowed difference in metric between the best path and the second path, as a percentage of the best path metric. High and low metric ranges are defined for each COS by the delayMetricRangeBoundary and tputMetricRangeBoundary attributes, and refer to total path metrics. When a variance value for a certain COS and metric range is set to the default value of 0, only equal metric paths can be used under that COS when the best path metric is in that range. When it is set to a value greater than 0, an alternate path which is safe (that is, non-looping) and which has a metric within this percentage of the best path metric can be used as a multipath. The special value of 9999 signifies an infinite variance, so that any safe alternate path may be used in addition to the single best path, regardless of its metric.
rtgDpnVarianceEntry	1.3.6.1.4.1.562.2.4.1.40.4.343.1		not-accessible	An entry in the rtgDpnVarianceTable.
INT rtgDpnVarianceCosIndex	1.3.6.1.4.1.562.2.4.1.40.4.343.1.1	INTEGER	not-accessible	This variable represents the next to last index for the rtgDpnVarianceTable.
INT rtgDpnVarianceMetricRangeIndex	1.3.6.1.4.1.562.2.4.1.40.4.343.1.2	INTEGER	not-accessible	This variable represents the final index for the rtgDpnVarianceTable.
U32 rtgDpnVarianceValue	1.3.6.1.4.1.562.2.4.1.40.4.343.1.3	Unsigned32	read-write	This variable represents an individual value for the rtgDpnVarianceTable.
dpnRoutingMIB	1.3.6.1.4.1.562.2.4.2.21
dpnRoutingGroup	1.3.6.1.4.1.562.2.4.2.21.1
dpnRoutingGroupBE	1.3.6.1.4.1.562.2.4.2.21.1.5
dpnRoutingGroupBE01	1.3.6.1.4.1.562.2.4.2.21.1.5.2
dpnRoutingGroupBE01A	1.3.6.1.4.1.562.2.4.2.21.1.5.2.2
dpnRoutingCapabilities	1.3.6.1.4.1.562.2.4.2.21.3
dpnRoutingCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.21.3.5
dpnRoutingCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.21.3.5.2
dpnRoutingCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.21.3.5.2.2

RFC description

Manages DPN (Data Provider Network) routing and address plan on Nortel Magellan Passport platforms.

Start monitoring Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-DpnRoutingMIB

What Is Nortel-Magellan-Passport-DpnRoutingMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description