Nortel-Magellan-Passport-DpnRoutingMIB :: rtgDpnModuleId

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DpnRoutingMIB › rtgDpnModuleId

rtgDpnModuleId

Module: Nortel-Magellan-Passport-DpnRoutingMIB

OID (symbolic): Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnModuleId

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.4.11.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the Module Identifier (MID) associated with the Passport node.

The MID is used to identify an Passport node supporting the transport of DPN traffic. Its value must be different from that of all MIDs assigned to Passport nodes in this RID subnet (interconnected Passport nodes sharing a RID) and AMs in clusters supported by this subnet. If routing zones are used, it must also be unique from all other MIDs in this zone.

The moduleId must be set when a DpnAddressPlan component is configured on an Passport node.

Changing the value of the moduleId will cause the node to restart.

What is rtgDpnModuleId?

Sets the Module Identifier (MID) that uniquely identifies this Passport node within its RID subnet and any connected AM clusters. Like the routing ID, it must be set during initial DpnAddressPlan configuration, and changing it later will restart the node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnModuleId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnModuleId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.3.1 i <value>

Start monitoring Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnModuleId OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.4rtgDpnNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11rtgDpnProvTableNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1rtgDpnProvEntryNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1.3rtgDpnModuleIdNortel-Magellan-Passport-DpnRoutingMIB