Nortel-Magellan-Passport-DpnRoutingMIB :: rtgDpnTputMetricRangeBoundary

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DpnRoutingMIB › rtgDpnTputMetricRangeBoundary

rtgDpnTputMetricRangeBoundary

Module: Nortel-Magellan-Passport-DpnRoutingMIB

OID (symbolic): Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnTputMetricRangeBoundary

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.4.11.1.8

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the total path throughput metric below which the variance value specified for throughput COS and a low metric range is used, and at or above which the variance value specified for throughput COS and a high metric range is used.

This attribute defaults to 0, so that the variance value specified for throughput COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for throughput COS and a low metric range is used for all throughput paths.

What is rtgDpnTputMetricRangeBoundary?

Sets the total throughput-path metric threshold that decides whether the low- or high-range variance value applies for the throughput class of service. At its default of 0 the high-range variance always applies; set to the maximum value, the low-range variance applies to all throughput paths.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.8
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnTputMetricRangeBoundary

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.8.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnTputMetricRangeBoundary.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.8.1 i <value>

Start monitoring Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnTputMetricRangeBoundary OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.4rtgDpnNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11rtgDpnProvTableNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1rtgDpnProvEntryNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1.8rtgDpnTputMetricRangeBoundaryNortel-Magellan-Passport-DpnRoutingMIB