Nortel-Magellan-Passport-DpnRoutingMIB :: rtgDpnDelayMetricCutOff

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DpnRoutingMIB › rtgDpnDelayMetricCutOff

rtgDpnDelayMetricCutOff

Module: Nortel-Magellan-Passport-DpnRoutingMIB

OID (symbolic): Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricCutOff

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.4.11.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the delay metric value beyond which a destination RID should be considered unreachable. That is, if a delay metric to a RID is equal to or greater than this value then the RID is considered to be unreachable in the delay class of service.

Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario. Care must be taken to ensure that the value chosen is big enough for the longest delay path in the network.

This attribute is optional; a default of 128 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value.

What is rtgDpnDelayMetricCutOff?

Sets the delay-metric threshold above which a destination RID is treated as unreachable for the delay class of service, defaulting to 128. Lowering it speeds up detection of lost reachability and cuts down on routing-update traffic, but an admin must keep it high enough to cover the network's longest delay path.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.4
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricCutOff

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.4.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricCutOff.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.4.1 i <value>

Start monitoring Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricCutOff OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.4rtgDpnNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11rtgDpnProvTableNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1rtgDpnProvEntryNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1.4rtgDpnDelayMetricCutOffNortel-Magellan-Passport-DpnRoutingMIB