All MIBs › Nortel-Magellan-Passport-BaseRoutingMIB
Category: IP Routing
Description: Manages Nortel Magellan Passport base IP routing configuration, static routes, and routing table.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-Magellan-Passport-BaseRoutingMIB?
Nortel-Magellan-Passport-BaseRoutingMIB is a Nortel enterprise MIB for the Magellan Passport wide-area switching platform, providing base IP routing configuration objects including static routes, routing table provisioning, and routing component row-status management. It exposes configuration-oriented data - routing component names, storage type, provisioning table entries, and splitting-region identifiers used to partition the routing table across processing regions. Its main monitoring value is administrative/configuration status rather than raw hardware sensors: an operator can check rtgRowStatus and rtgProvTable entries to confirm a routing component is correctly provisioned and active, which indirectly reflects the health of the routing software on the Passport node. It depends on standard SNMPv2 row-status and storage-type textual conventions (RowStatus, StorageType) for table lifecycle management. It is deployed in legacy Nortel Magellan Passport WAN switching environments where IP routing components are provisioned and monitored via SNMP. Compiling the Nortel-Magellan-Passport-BaseRoutingMIB file alongside the platform's standard RowStatus and StorageType conventions is a prerequisite for any tool that wants to poll or provision these routing components.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-BaseRoutingMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel Magellan Passport WAN switch
Monitoring Examples
An administrator would poll rtgRowStatusTable/rtgRowStatusEntry to confirm that a routing component identified by rtgComponentName and rtgIndex has rtgRowStatus set to active, and would check rtgProvTable/rtgProvEntry for provisioning parameters like rtgTandemTraffic. The rtgSplittingRegionIdsTable/rtgSplittingRegionIdsEntry would be checked to verify routing table partitioning across regions is configured as expected. A row stuck in a notReady or notInService rtgRowStatus would reveal a failed or incomplete routing component provisioning operation on the Passport node.
What Can Be Monitored
- routing component row status
- routing component provisioning parameters
- tandem traffic configuration
- routing table splitting region assignment
This MIB depends on
Related MIBs
Imported Objects
From Nortel-Magellan-Passport-StandardTextualConventionsMIB
| Counter32 | |
| DisplayString | |
| Gauge32 | |
| Integer32 | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-Magellan-Passport-TextualConventionsMIB
| AsciiStringIndex | |
| DigitString | |
| FixedPoint1 | |
| NonReplicated |
From Nortel-Magellan-Passport-UsefulDefinitionsMIB
| components | OBJECT-IDENTITY |
| passportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| baseRoutingCapabilities | 1.3.6.1.4.1.562.2.4.2.18.3 | |||
| baseRoutingCapabilitiesBE | 1.3.6.1.4.1.562.2.4.2.18.3.5 | |||
| baseRoutingCapabilitiesBE00 | 1.3.6.1.4.1.562.2.4.2.18.3.5.1 | |||
| baseRoutingCapabilitiesBE00A | 1.3.6.1.4.1.562.2.4.2.18.3.5.1.2 | |||
| baseRoutingGroup | 1.3.6.1.4.1.562.2.4.2.18.1 | |||
| baseRoutingGroupBE | 1.3.6.1.4.1.562.2.4.2.18.1.5 | |||
| baseRoutingGroupBE00 | 1.3.6.1.4.1.562.2.4.2.18.1.5.1 | |||
| baseRoutingGroupBE00A | 1.3.6.1.4.1.562.2.4.2.18.1.5.1.2 | |||
| baseRoutingMIB | 1.3.6.1.4.1.562.2.4.2.18 | |||
| npi | 1.3.6.1.4.1.562.2.4.1.43 | |||
| STR npiComponentName | 1.3.6.1.4.1.562.2.4.1.43.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| npiDna | 1.3.6.1.4.1.562.2.4.1.43.2 | |||
| STR npiDnaComponentName | 1.3.6.1.4.1.562.2.4.1.43.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NUM npiDnaDestinationName | 1.3.6.1.4.1.562.2.4.1.43.2.10.1.1 | RowPointer | read-only | This attribute holds the Component Name of the application to which the DNA belongs. |
| STR npiDnaIndex | 1.3.6.1.4.1.562.2.4.1.43.2.1.1.10 | DigitString | not-accessible | This variable represents the index for the npiDna tables. |
| npiDnaInfoEntry | 1.3.6.1.4.1.562.2.4.1.43.2.10.1 | not-accessible | An entry in the npiDnaInfoTable. | |
| npiDnaInfoTable | 1.3.6.1.4.1.562.2.4.1.43.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Npi/ Dna/ Information This group of attributes contains the attributes for a DNA in the numbering plan. | |
| ROW npiDnaRowStatus | 1.3.6.1.4.1.562.2.4.1.43.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of npiDna components. These components cannot be added nor deleted. |
| npiDnaRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.43.2.1.1 | not-accessible | A single entry in the table represents a single npiDna component. | |
| npiDnaRowStatusTable | 1.3.6.1.4.1.562.2.4.1.43.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of npiDna components. | |
| STO npiDnaStorageType | 1.3.6.1.4.1.562.2.4.1.43.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the npiDna tables. |
| INT npiIndex | 1.3.6.1.4.1.562.2.4.1.43.1.1.10 | INTEGER | not-accessible | This variable represents the index for the npi tables. |
| ROW npiRowStatus | 1.3.6.1.4.1.562.2.4.1.43.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of npi components. These components cannot be added nor deleted. |
| npiRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.43.1.1 | not-accessible | A single entry in the table represents a single npi component. | |
| npiRowStatusTable | 1.3.6.1.4.1.562.2.4.1.43.1 | not-accessible | This entry controls the addition and deletion of npi components. | |
| npiStatsEntry | 1.3.6.1.4.1.562.2.4.1.43.10.1 | not-accessible | An entry in the npiStatsTable. | |
| npiStatsTable | 1.3.6.1.4.1.562.2.4.1.43.10 | not-accessible | Npi/ Statistics This group of attributes contains the statistics kept for a particular numbering plan indicator. The only statistic present is the total number of DNAs provisioned for the numbering plan. | |
| STO npiStorageType | 1.3.6.1.4.1.562.2.4.1.43.1.1.4 | StorageType | read-only | This variable represents the storage type value for the npi tables. |
| U32 npiTotalDnas | 1.3.6.1.4.1.562.2.4.1.43.10.1.1 | Unsigned32 | read-only | This attribute holds the total number of Dnas that are in the numbering plan. If this attribute is displayed in provisioning mode, the number includes the Dnas that have been added/deleted in that provisioning session, otherwise the number only includes the Dnas that have been activated. |
| rtg | 1.3.6.1.4.1.562.2.4.1.40 | |||
| STR rtgComponentName | 1.3.6.1.4.1.562.2.4.1.40.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NON rtgIndex | 1.3.6.1.4.1.562.2.4.1.40.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the rtg tables. |
| rtgProvEntry | 1.3.6.1.4.1.562.2.4.1.40.12.1 | not-accessible | An entry in the rtgProvTable. | |
| rtgProvTable | 1.3.6.1.4.1.562.2.4.1.40.12 | not-accessible | This group contains the provisioning data for the routing system. | |
| ROW rtgRowStatus | 1.3.6.1.4.1.562.2.4.1.40.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of rtg components. These components can be added. |
| rtgRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.40.1.1 | not-accessible | A single entry in the table represents a single rtg component. | |
| rtgRowStatusTable | 1.3.6.1.4.1.562.2.4.1.40.1 | not-accessible | This entry controls the addition and deletion of rtg components. | |
| rtgSplittingRegionIdsEntry | 1.3.6.1.4.1.562.2.4.1.40.407.1 | not-accessible | An entry in the rtgSplittingRegionIdsTable. | |
| ROW rtgSplittingRegionIdsRowStatus | 1.3.6.1.4.1.562.2.4.1.40.407.1.2 | RowStatus | write-only | This variable is used to control the addition and deletion of individual values of the rtgSplittingRegionIdsTable. |
| rtgSplittingRegionIdsTable | 1.3.6.1.4.1.562.2.4.1.40.407 | not-accessible | This attribute is used only when splitting or merging existing topology regions. It specifies which topology regions are in a migration status. A node will only exchange topological information with a connected node under the following conditions: (i) the nodes belong to the same topology region, (ii) one of the nodes is provisioned with the default regionId of 0, (iii) the connected node's splittingRegionIds attribute is provisioned to contain the local node's regionId value and the local node's splittingRegionIds is also provisioned to contain the connected node's regionId value when both two nodes' regionIds are different and non-zero. When this attribute is used during migration of regions, values for the attribute are normally the old and new regionIds for the node. Use of this attribute makes it possible to migrate existing topology regions in the following cases: (i) splitting a topology region into two without isolating a node, (ii) merging two different topology regions into one without introducing an extra topological barrier. The attribute should be cleaned when all migration activities are complete. At this point, the region boundary will take effect. | |
| I32 rtgSplittingRegionIdsValue | 1.3.6.1.4.1.562.2.4.1.40.407.1.1 | Integer32 | read-write | This variable represents both the value and the index for the rtgSplittingRegionIdsTable. |
| STO rtgStorageType | 1.3.6.1.4.1.562.2.4.1.40.1.1.4 | StorageType | read-only | This variable represents the storage type value for the rtg tables. |
| INT rtgTandemTraffic | 1.3.6.1.4.1.562.2.4.1.40.12.1.1 | INTEGER | read-write | This attribute specifies whether tandem traffic is permitted through the node. Tandem traffic is traffic which arrives at the node on a trunk and leaves the node on a trunk. Traffic to or from a gateway (internal or external) is not affected by the setting of this attribute. The default value of this attribute is allowed, which permits tandem traffic to be routed through the node. When this attribute is set to denied, DPN, VNS, and PORS traffic are not permitted to tandem through the node. Changing this attribute has no effect on PORS calls which were set up before the change. These calls can be manually forced to reroute using the new setting by clearing the calls or locking the trunks on which they are routed. |
| rtgTop | 1.3.6.1.4.1.562.2.4.1.40.5 | |||
| STR rtgTopComponentName | 1.3.6.1.4.1.562.2.4.1.40.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| C32 rtgTopControlBytesRx | 1.3.6.1.4.1.562.2.4.1.40.5.11.1.2 | Counter32 | read-only | This attribute shows the total number of topology routing control packet bytes received by this node from other Passport nodes in the network. |
| C32 rtgTopControlBytesTx | 1.3.6.1.4.1.562.2.4.1.40.5.11.1.4 | Counter32 | read-only | This attribute shows the total number of topology routing control packet bytes sent by this node to other Passport nodes in the network. |
| C32 rtgTopControlPktRx | 1.3.6.1.4.1.562.2.4.1.40.5.11.1.1 | Counter32 | read-only | This attribute shows the total number of topology routing control packets which have been received by this node from other Passport nodes in the network. |
| C32 rtgTopControlPktTx | 1.3.6.1.4.1.562.2.4.1.40.5.11.1.3 | Counter32 | read-only | This attribute shows the total number of topology routing control packets which have been sent by this node to other Passport nodes in the network. |
| NON rtgTopIndex | 1.3.6.1.4.1.562.2.4.1.40.5.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the rtgTop tables. |
| rtgTopNode | 1.3.6.1.4.1.562.2.4.1.40.5.2 | |||
| STR rtgTopNodeComponentName | 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STR rtgTopNodeIndex | 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the rtgTopNode tables. |
| rtgTopNodeLg | 1.3.6.1.4.1.562.2.4.1.40.5.2.2 | |||
| STR rtgTopNodeLgComponentName | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 rtgTopNodeLgDelayMetric | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1.1 | Unsigned32 | read-only | This attribute specifies the outbound cost to forward packets across the trunk group for a delay class of service. It represents the trunk in the trunk group with the lowest round trip delay. A low outbound cost is preferable to a higher value as it is associated with higher speed facilities. A metric value of 2147483647 means that the trunk group is unusable for the delay class of service. |
| STR rtgTopNodeLgIndex | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the rtgTopNodeLg tables. |
| rtgTopNodeLgLnnEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.235.1 | not-accessible | An entry in the rtgTopNodeLgLnnTable. | |
| rtgTopNodeLgLnnTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.235 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute is a list of integers which specify the logical network numbers supported by the trunk group. Each of these numbers corresponds with a particular instance of network protocol supported on this switch. LNN 0 is present on all trunks by default to allow Passport control traffic on the trunk. | |
| I32 rtgTopNodeLgLnnValue | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.235.1.1 | Integer32 | read-only | This variable represents both the value and the index for the rtgTopNodeLgLnnTable. |
| rtgTopNodeLgOperEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1 | not-accessible | An entry in the rtgTopNodeLgOperTable. | |
| rtgTopNodeLgOperTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Operational This group contains the operational data stored and maintained by TrunkGroup component for each trunk group attached to a node in the Passport network. | |
| ROW rtgTopNodeLgRowStatus | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of rtgTopNodeLg components. These components cannot be added nor deleted. |
| rtgTopNodeLgRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1 | not-accessible | A single entry in the table represents a single rtgTopNodeLg component. | |
| rtgTopNodeLgRowStatusTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNodeLg components. | |
| STO rtgTopNodeLgStorageType | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the rtgTopNodeLg tables. |
| U32 rtgTopNodeLgTputMetric | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1.2 | Unsigned32 | read-only | This attribute specifies the outbound cost to forward packets across the trunk group for a throughput class of service. It is computed from the combined speed of each link in the trunk group. A low outbound cost is preferable to a higher value as it is associated with higher speed facilities. A metric value of 2147483647 means that the trunk group is unusable for the throughput class of service. |
| rtgTopNodeLgTrkObj | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2 | |||
| STR rtgTopNodeLgTrkObjComponentName | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 rtgTopNodeLgTrkObjCustomerParameter | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.7 | Unsigned32 | read-only | This attribute indicates the customer defined parameter for the trunk. Its value, a number from zero(0) to seven(7), is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary PLC attribute, requiredCustomerParameter, also has a value from zero(0) to seven(7). The Route Selector does not consider trunks whose PA customerParameter is greater than the requiredCustomParameter of the path. |
| U32 rtgTopNodeLgTrkObjFarEndTrmLkInstance | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.8 | Unsigned32 | read-only | This attribute indicates identification of the corresponding trunk providing the reverse direction of transmission. |
| I32 rtgTopNodeLgTrkObjIndex | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the rtgTopNodeLgTrkObj tables. |
| G32 rtgTopNodeLgTrkObjMaxReservableBwOut | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.1 | Gauge32 | read-only | This attribute displays trunk bandwidth which can be used for reservations on behalf of connections requiring path oriented routing. This bandwidth is displayed in bit/s and has been calculated by concerned trunk path administrator from the trunk bandwidth and from the percentage of trunk bandwidth provisioned for reservations by PORS. |
| rtgTopNodeLgTrkObjOperEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1 | not-accessible | An entry in the rtgTopNodeLgTrkObjOperTable. | |
| rtgTopNodeLgTrkObjOperTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Trunk/ Operational This group contains the operational data stored and maintained by TplPorTrunk component. | |
| ROW rtgTopNodeLgTrkObjRowStatus | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of rtgTopNodeLgTrkObj components. These components cannot be added nor deleted. |
| rtgTopNodeLgTrkObjRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1 | not-accessible | A single entry in the table represents a single rtgTopNodeLgTrkObj component. | |
| rtgTopNodeLgTrkObjRowStatusTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNodeLgTrkObj components. | |
| STO rtgTopNodeLgTrkObjStorageType | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the rtgTopNodeLgTrkObj tables. |
| OCT rtgTopNodeLgTrkObjSupportedTrafficTypes | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.5 | OCTET STRING | read-only | This attribute indicates the type of traffic that can be transmitted on the trunk. There are eight(8) possible traffic types, and the trunk can transmit all of them if desired. The voice, data and video traffic types are defined, and five(5) other traffic types can be defined in concerned trunk path administrator. This attribute is used in the route selection process to limit the route to trunks that support the traffic to be carried by the path. Description of bits: voice(0) data(1) video(2) trafficType1(3) trafficType2(4) trafficType3(5) trafficType4(6) trafficType5(7) |
| U32 rtgTopNodeLgTrkObjTrunkCost | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.2 | Unsigned32 | read-only | This attribute displays trunk cost metric provisioned as trunkCost attribute of a concerned trunk path administrator. |
| U32 rtgTopNodeLgTrkObjTrunkDelay | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.3 | Unsigned32 | read-only | This attribute displays one-directional trunk delay measured by trunk during staging. This is half (rounded down to an integer) of delay displayable by attribute of ID aTrmLinkDelay_c. |
| U32 rtgTopNodeLgTrkObjTrunkSecurity | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.4 | Unsigned32 | read-only | This attribute displays trunk security metric provisioned as trunkSecurity attribute of a concerned trunk path administrator. |
| INT rtgTopNodeLgTrkObjTrunkType | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.6 | INTEGER | read-only | This attribute lists the type of the trunk. There can be up to eight(8) types of trunks. The terrestrial and satellite trunk types have been defined, leaving six(6) remaining types that can be defined by the network administration. The set of allowed trunk types for a path is indicated in the permittedTrunkType attribute of the PLC. When selecting a route, PORS only chooses trunks whose PA trunkType are in the permittedTrunkTypes set of the path. |
| rtgTopNodeLgTrkObjUnresEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1 | not-accessible | An entry in the rtgTopNodeLgTrkObjUnresTable. | |
| INT rtgTopNodeLgTrkObjUnresSetupPriorityIndex | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.1 | INTEGER | not-accessible | This variable represents the next to last index for the rtgTopNodeLgTrkObjUnresTable. |
| rtgTopNodeLgTrkObjUnresTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays a table. In the first row there are setup priorities. In the second row there are numerators of parts of unreserved bandwidth corresponding to setup priority 0 (first column) through 4 (fifth column). The denominator is 255. | |
| I32 rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.2 | Integer32 | not-accessible | This variable represents the final index for the rtgTopNodeLgTrkObjUnresTable. |
| U32 rtgTopNodeLgTrkObjUnresValue | 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.3 | Unsigned32 | read-only | This variable represents an individual value for the rtgTopNodeLgTrkObjUnresTable. |
| U32 rtgTopNodeNodeId | 1.3.6.1.4.1.562.2.4.1.40.5.2.10.1.1 | Unsigned32 | read-only | The nodeId is a number that uniquely identifies the Node component instance in the Passport network. It is the identifier used in the routing control packets sent by this node to other Passport nodes in the network. The nodeId, for each node in the network, is learned from the Passport routing protocol packets. |
| rtgTopNodeOperEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.10.1 | not-accessible | An entry in the rtgTopNodeOperTable. | |
| rtgTopNodeOperTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ Operational This group contains operational data about each node in the Passport network and its connectivity to its neighbours. | |
| ROW rtgTopNodeRowStatus | 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of rtgTopNode components. These components cannot be added nor deleted. |
| rtgTopNodeRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1 | not-accessible | A single entry in the table represents a single rtgTopNode component. | |
| rtgTopNodeRowStatusTable | 1.3.6.1.4.1.562.2.4.1.40.5.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNode components. | |
| STO rtgTopNodeStorageType | 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the rtgTopNode tables. |
| ROW rtgTopRowStatus | 1.3.6.1.4.1.562.2.4.1.40.5.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of rtgTop components. These components cannot be added nor deleted. |
| rtgTopRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.40.5.1.1 | not-accessible | A single entry in the table represents a single rtgTop component. | |
| rtgTopRowStatusTable | 1.3.6.1.4.1.562.2.4.1.40.5.1 | not-accessible | This entry controls the addition and deletion of rtgTop components. | |
| rtgTopStatsEntry | 1.3.6.1.4.1.562.2.4.1.40.5.11.1 | not-accessible | An entry in the rtgTopStatsTable. | |
| rtgTopStatsTable | 1.3.6.1.4.1.562.2.4.1.40.5.11 | not-accessible | Rtg Top Statistics This group contains operational data stored and maintained by this component for recording statistics of Passport routing control packets which have been sent or received by Topology. | |
| STO rtgTopStorageType | 1.3.6.1.4.1.562.2.4.1.40.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the rtgTop tables. |
| trm | 1.3.6.1.4.1.562.2.4.1.41 | |||
| STR trmComponentName | 1.3.6.1.4.1.562.2.4.1.41.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NON trmIndex | 1.3.6.1.4.1.562.2.4.1.41.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the trm tables. |
| trmLg | 1.3.6.1.4.1.562.2.4.1.41.3 | |||
| STR trmLgComponentName | 1.3.6.1.4.1.562.2.4.1.41.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STR trmLgIndex | 1.3.6.1.4.1.562.2.4.1.41.3.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the trmLg tables. |
| trmLgLk | 1.3.6.1.4.1.562.2.4.1.41.3.2 | |||
| STR trmLgLkComponentName | 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| G32 trmLgLkDelay | 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.3 | Gauge32 | read-only | This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If an override delay is specified, it will be used instead. |
| NUM trmLgLkDelayUsec | 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.6 | FixedPoint1 | read-only | This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If a delay override is specified, it will be used instead. |
| trmLgLkDiscardCongestedEntry | 1.3.6.1.4.1.562.2.4.1.41.3.2.280.1 | not-accessible | An entry in the trmLgLkDiscardCongestedTable. | |
| INT trmLgLkDiscardCongestedIndex | 1.3.6.1.4.1.562.2.4.1.41.3.2.280.1.1 | INTEGER | not-accessible | This variable represents the trmLgLkDiscardCongestedTable specific index for the trmLgLkDiscardCongestedTable. |
| trmLgLkDiscardCongestedTable | 1.3.6.1.4.1.562.2.4.1.41.3.2.280 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This attribute is a vector with three entries. Each entry corresponds to a discard priority of the packet. The first entry represents the discard count of packets with discard priority 1, the second entry discard priority 2, and the third entry discard priority 3. Each entry (counter) wraps around to zero when the maximum value is reached. | |
| C32 trmLgLkDiscardCongestedValue | 1.3.6.1.4.1.562.2.4.1.41.3.2.280.1.2 | Counter32 | read-only | This variable represents an individual value for the trmLgLkDiscardCongestedTable. |
| C32 trmLgLkFciSet | 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.1 | Counter32 | read-only | This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the maximum value is reached. |
| trmLgLkFwdStatsEntry | 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1 | not-accessible | An entry in the trmLgLkFwdStatsTable. | |
| trmLgLkFwdStatsTable | 1.3.6.1.4.1.562.2.4.1.41.3.2.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link. | |
| I32 trmLgLkIndex | 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the trmLgLk tables. |
| NUM trmLgLkLinkComponentName | 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.5 | RowPointer | read-only | This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system. |
| U32 trmLgLkMaxTxUnit | 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.4 | Unsigned32 | read-only | This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link. |
| trmLgLkOperEntry | 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1 | not-accessible | An entry in the trmLgLkOperTable. | |
| trmLgLkOperTable | 1.3.6.1.4.1.562.2.4.1.41.3.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link. | |
| C32 trmLgLkOverflowAttempts | 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.2 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value loadspreading. This counter wraps around to zero when the maximum value is reached. |
| C32 trmLgLkPathOverflowAttempts | 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.3 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached. |
| ROW trmLgLkRowStatus | 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of trmLgLk components. These components cannot be added nor deleted. |
| trmLgLkRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1 | not-accessible | A single entry in the table represents a single trmLgLk component. | |
| trmLgLkRowStatusTable | 1.3.6.1.4.1.562.2.4.1.41.3.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLgLk components. | |
| INT trmLgLkStatus | 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.1 | INTEGER | read-only | This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has requested to join the routing systems. online- The link is active and has joined one or more routing systems. |
| STO trmLgLkStorageType | 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the trmLgLk tables. |
| G32 trmLgLkThroughput | 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.2 | Gauge32 | read-only | This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed override is specified, it is used instead. The 'throughput' value can be exceeded by connectionless traffic whenever path-oriented traffic is not using it's reserved bandwidth. |
| trmLgLNN | 1.3.6.1.4.1.562.2.4.1.41.3.3 | |||
| NUM trmLgLNNAddressPlanComponentName | 1.3.6.1.4.1.562.2.4.1.41.3.3.10.1.2 | RowPointer | read-only | This attribute indicates the component name of the address plan which owns the logical network number of this component. |
| STR trmLgLNNComponentName | 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| I32 trmLgLNNIndex | 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the trmLgLNN tables. |
| INT trmLgLNNLinkType | 1.3.6.1.4.1.562.2.4.1.41.3.3.10.1.1 | INTEGER | read-only | This attribute indicates how the LNN is transported over the link group. It can be one of three types: trunk - the LNN is supported by Topology over a Passport to Passport link internal gateway - the LNN is supported by an address plan (but not Topology) over a Passport to Passport link external gateway - the LNN is supported by an address plan (but not Topology) over a Passport to non-Passport link |
| trmLgLNNOperEntry | 1.3.6.1.4.1.562.2.4.1.41.3.3.10.1 | not-accessible | An entry in the trmLgLNNOperTable. | |
| trmLgLNNOperTable | 1.3.6.1.4.1.562.2.4.1.41.3.3.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lg/ LNN/ Operational This group of attributes is the information associated with an address plan. | |
| ROW trmLgLNNRowStatus | 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of trmLgLNN components. These components cannot be added nor deleted. |
| trmLgLNNRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1 | not-accessible | A single entry in the table represents a single trmLgLNN component. | |
| trmLgLNNRowStatusTable | 1.3.6.1.4.1.562.2.4.1.41.3.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLgLNN components. | |
| STO trmLgLNNStorageType | 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the trmLgLNN tables. |
| ROW trmLgRowStatus | 1.3.6.1.4.1.562.2.4.1.41.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of trmLg components. These components cannot be added nor deleted. |
| trmLgRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.41.3.1.1 | not-accessible | A single entry in the table represents a single trmLg component. | |
| trmLgRowStatusTable | 1.3.6.1.4.1.562.2.4.1.41.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLg components. | |
| STO trmLgStorageType | 1.3.6.1.4.1.562.2.4.1.41.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the trmLg tables. |
| trmLk | 1.3.6.1.4.1.562.2.4.1.41.2 | |||
| STR trmLkComponentName | 1.3.6.1.4.1.562.2.4.1.41.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| G32 trmLkDelay | 1.3.6.1.4.1.562.2.4.1.41.2.10.1.3 | Gauge32 | read-only | This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If an override delay is specified, it will be used instead. |
| NUM trmLkDelayUsec | 1.3.6.1.4.1.562.2.4.1.41.2.10.1.6 | FixedPoint1 | read-only | This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If a delay override is specified, it will be used instead. |
| trmLkDiscardCongestedEntry | 1.3.6.1.4.1.562.2.4.1.41.2.280.1 | not-accessible | An entry in the trmLkDiscardCongestedTable. | |
| INT trmLkDiscardCongestedIndex | 1.3.6.1.4.1.562.2.4.1.41.2.280.1.1 | INTEGER | not-accessible | This variable represents the trmLkDiscardCongestedTable specific index for the trmLkDiscardCongestedTable. |
| trmLkDiscardCongestedTable | 1.3.6.1.4.1.562.2.4.1.41.2.280 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This attribute is a vector with three entries. Each entry corresponds to a discard priority of the packet. The first entry represents the discard count of packets with discard priority 1, the second entry discard priority 2, and the third entry discard priority 3. Each entry (counter) wraps around to zero when the maximum value is reached. | |
| C32 trmLkDiscardCongestedValue | 1.3.6.1.4.1.562.2.4.1.41.2.280.1.2 | Counter32 | read-only | This variable represents an individual value for the trmLkDiscardCongestedTable. |
| C32 trmLkFciSet | 1.3.6.1.4.1.562.2.4.1.41.2.11.1.1 | Counter32 | read-only | This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the maximum value is reached. |
| trmLkFwdStatsEntry | 1.3.6.1.4.1.562.2.4.1.41.2.11.1 | not-accessible | An entry in the trmLkFwdStatsTable. | |
| trmLkFwdStatsTable | 1.3.6.1.4.1.562.2.4.1.41.2.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link. | |
| I32 trmLkIndex | 1.3.6.1.4.1.562.2.4.1.41.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the trmLk tables. |
| NUM trmLkLinkComponentName | 1.3.6.1.4.1.562.2.4.1.41.2.10.1.5 | RowPointer | read-only | This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system. |
| U32 trmLkMaxTxUnit | 1.3.6.1.4.1.562.2.4.1.41.2.10.1.4 | Unsigned32 | read-only | This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link. |
| trmLkOperEntry | 1.3.6.1.4.1.562.2.4.1.41.2.10.1 | not-accessible | An entry in the trmLkOperTable. | |
| trmLkOperTable | 1.3.6.1.4.1.562.2.4.1.41.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link. | |
| C32 trmLkOverflowAttempts | 1.3.6.1.4.1.562.2.4.1.41.2.11.1.2 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value loadspreading. This counter wraps around to zero when the maximum value is reached. |
| C32 trmLkPathOverflowAttempts | 1.3.6.1.4.1.562.2.4.1.41.2.11.1.3 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached. |
| ROW trmLkRowStatus | 1.3.6.1.4.1.562.2.4.1.41.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of trmLk components. These components cannot be added nor deleted. |
| trmLkRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.41.2.1.1 | not-accessible | A single entry in the table represents a single trmLk component. | |
| trmLkRowStatusTable | 1.3.6.1.4.1.562.2.4.1.41.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLk components. | |
| INT trmLkStatus | 1.3.6.1.4.1.562.2.4.1.41.2.10.1.1 | INTEGER | read-only | This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has requested to join the routing systems. online- The link is active and has joined one or more routing systems. |
| STO trmLkStorageType | 1.3.6.1.4.1.562.2.4.1.41.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the trmLk tables. |
| G32 trmLkThroughput | 1.3.6.1.4.1.562.2.4.1.41.2.10.1.2 | Gauge32 | read-only | This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed override is specified, it is used instead. The 'throughput' value can be exceeded by connectionless traffic whenever path-oriented traffic is not using it's reserved bandwidth. |
| ROW trmRowStatus | 1.3.6.1.4.1.562.2.4.1.41.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of trm components. These components cannot be added nor deleted. |
| trmRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.41.1.1 | not-accessible | A single entry in the table represents a single trm component. | |
| trmRowStatusTable | 1.3.6.1.4.1.562.2.4.1.41.1 | not-accessible | This entry controls the addition and deletion of trm components. | |
| STO trmStorageType | 1.3.6.1.4.1.562.2.4.1.41.1.1.4 | StorageType | read-only | This variable represents the storage type value for the trm tables. |
FAQ
What can an operator confirm about IP routing on a Magellan Passport switch using this MIB?
By checking rtgRowStatus and rtgProvTable entries, they can confirm that a given routing component is correctly provisioned and active, which indirectly signals the health of the routing software on that Passport node, plus review static routes and how the routing table is split across processing regions.
Is Nortel-Magellan-Passport-BaseRoutingMIB used for hardware sensors or configuration status?
It's mainly configuration/administrative status rather than raw hardware sensors -- routing component names, storage type, provisioning entries, and splitting-region identifiers -- so it's used to verify routing is provisioned correctly rather than to read temperature or power readings.
RFC description
Nortel vendor-private MIB providing IP routing table management, route metrics, and routing protocol integration on Nortel Magellan Passport platforms.
Start monitoring Nortel Magellan Passport WAN switch (base IP routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.