MPIOS-MIB

All MIBs › MPIOS-MIB

Organization: Maipu DataComm

Last Updated: 2001-01-05

Category: IP Routing, MPLS

Description: Manages Maipu DataComm router OS configuration, interfaces, and protocol state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MPIOS-MIB?

MPIOS-MIB is a Maipu Communication proprietary MIB for the MP2600 series router operating system, whose module description states it covers "the process and memory information" of the device. It exposes detailed memory-pool statistics (numBytesFree, numBytesAlloc, memoryTotalBytes, allocBytesPercent) alongside a task table (taskTable/taskEntry/taskId) listing running processes/tasks on the router. This MIB is squarely aimed at monitoring the software health of the router — free vs. allocated memory, block-size fragmentation (avgBlockSizeFree, maxBlockSizeFree), and the per-task process list — which are key indicators of memory leaks, fragmentation, or runaway processes on the router OS. No specific external MIB dependency is indicated; it is a self-contained proprietary MIB under the Maipu router OS ('MPIOS') product tree. It is deployed for operational monitoring of Maipu MP2600-family routers and similar Maipu DataComm networking equipment, and network teams typically start with an MPIOS-MIB download to load these objects into their SNMP management tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in MPIOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Maipu MP2600 router
Maipu DataComm networking equipment

Monitoring Examples

Polling memoryTotalBytes alongside numBytesFree and numBytesAlloc under sysMemory shows overall memory pressure, while allocBytesPercent gives a quick utilization percentage; a rising allocBytesPercent combined with a shrinking maxBlockSizeFree in the free-block statistics would indicate memory fragmentation, and cross-referencing taskTable (via taskId) helps identify which running task is consuming the most memory.

What Can Be Monitored

free/allocated memory bytes
memory block fragmentation
total memory and utilization percent
running task/process list
system memory pool status

Imported Objects

From MAIPU-SMI

mpMgmt

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using rtrIcmpEchoPktTotalSend OID:

Select a Maipu MP2600 router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rtrIcmpEchoPktTotalSend into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports total packets which send by the ICMP entity. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
mpios	1.3.6.1.4.1.5651.3.20			The process and memory information of MP2600 infomation!
iosSystem	1.3.6.1.4.1.5651.3.20.1
iosObjects	1.3.6.1.4.1.5651.3.20.1.1
sysMemory	1.3.6.1.4.1.5651.3.20.1.1.1
INT numBytesFree	1.3.6.1.4.1.5651.3.20.1.1.1.1	INTEGER	read-only	The number of bytes free in the system memory
INT numBlocksFree	1.3.6.1.4.1.5651.3.20.1.1.1.2	INTEGER	read-only	The number of blocks free in the system memory
INT avgBlockSizeFree	1.3.6.1.4.1.5651.3.20.1.1.1.3	INTEGER	read-only	The average block size that is free in the system memory
INT maxBlockSizeFree	1.3.6.1.4.1.5651.3.20.1.1.1.4	INTEGER	read-only	The largest block size that is free in the memory
INT numBytesAlloc	1.3.6.1.4.1.5651.3.20.1.1.1.5	INTEGER	read-only	The number of bytes of system memory that have been allocated by tasks and system services
INT numBlocksAlloc	1.3.6.1.4.1.5651.3.20.1.1.1.6	INTEGER	read-only	The number of blocks of system memory that have been allocated in the system
INT avgBlockSizeAlloc	1.3.6.1.4.1.5651.3.20.1.1.1.7	INTEGER	read-only	The average memory block size that has been allocated in the system
INT memoryTotalBytes	1.3.6.1.4.1.5651.3.20.1.1.1.8	INTEGER	read-only	The total available memory bytes
INT allocBytesPercent	1.3.6.1.4.1.5651.3.20.1.1.1.9	INTEGER	read-only	The allocated bytes percent which value is allocated bytes divided by total bytes, This value can be in the range from 0 to 100.
sysTask	1.3.6.1.4.1.5651.3.20.1.1.2
taskTable	1.3.6.1.4.1.5651.3.20.1.1.2.1		not-accessible	Represents the target's task table. Each entry in this table represents a task
taskEntry	1.3.6.1.4.1.5651.3.20.1.1.2.1.1		not-accessible	Each entry contains information with regards to a task in the system
U32 taskId	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.1	Unsigned32	read-only	This is the task ID assigned by VxWorks to a task in the system. A taskId of zero specifies a new task.
STR taskName	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.2	DisplayString	read-write	This is the name of the VxWorks task. This value can only be specified (set) at task creation.
I32 taskPriority	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.3	Integer32	read-write	The priority of the VxWorks task. This value can be in the range from 0, the highest priority, to 255, the lowest priority.
INT taskStatus	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.4	INTEGER	read-write	This field specifies the current task status. It can be used to change the current task state. For example, to suspend a task, the value of taskStatus is changed to task-suspended, to delete a task the value is changed to task-deleted, etc...
I32 taskOptions	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.5	Integer32	read-write	This value represents the sum of the following options: value option 1 VX_SUPERVISOR_MODE(read-only) 2 VX_UNBREAKABLE (break points ignored) 4 VX_DEALLOC_STACK (deallocate stack) 8 VX_FP_TASK (floating point support) 16 VX_STDIO (read-only) 128 VX_PRIVATE_ENV (private env. variables) 256 VX_NO_STACK_FILL (don't fill stack) All the options above can be set at task creation time. However, once the task is executing the only option that can be changed is VX_UNBREAKABLE. The option is toggled based on the current setting.
STR taskMain	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.6	DisplayString	read-write	This is the name of the entry function for the VxWorks task. This name can only be specified when a task is created (entry added in the table). The symbol must exist in the VxWorks target.
U32 taskStackPtr	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.7	Unsigned32	read-only	This is the saved stack pointer for the task.
U32 taskStackBase	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.8	Unsigned32	read-only	This is the address of the bottom of the stack of the VxWorks task.
U32 taskStackPos	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.9	Unsigned32	read-only	This is the effective top of the stack in the current task state.
U32 taskStackEnd	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.10	Unsigned32	read-only	This is the address of the top of the stack of the VxWorks task.
U32 taskStackSize	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.11	Unsigned32	read-write	This is the actual size of the stack in bytes. The size of the stack can only be specified at task creation (adding an entry to the table).
U32 taskStackSizeUsage	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.12	Unsigned32	read-only	The number of bytes currently in use by the task from the stack.
U32 taskStackMaxUsed	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.13	Unsigned32	read-only	This is the maximum number of bytes that have been used by the task from the stack.
U32 taskStackFree	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.14	Unsigned32	read-only	This is the number of bytes that are free currently in the task stack.
I32 taskErrorStatus	1.3.6.1.4.1.5651.3.20.1.1.2.1.1.15	Integer32	read-only	This is the most recent error status for this task.
STR taskDescr	1.3.6.1.4.1.5651.3.20.1.1.2.2	DisplayString	read-only	This is description for error task. If the task runs well the string will be null.
sysCpu	1.3.6.1.4.1.5651.3.20.1.1.3
INT sysCpuStatus	1.3.6.1.4.1.5651.3.20.1.1.3.1	INTEGER	read-write	This is the status of collecting CPU utilization rate which include two status: spyCpu (2), noSpyCpu(1), if you want to get cpuUtilTable and cpuTaskTable, you must make status to spy cpu
INT sysCpuTaskTabView	1.3.6.1.4.1.5651.3.20.1.1.3.2	INTEGER	read-write	This is the status of cpuTaskTable view: detailed view is showing every task info and simple view is only showing task which had used cpu
INT checkCpuTimeInterval	1.3.6.1.4.1.5651.3.20.1.1.3.3	INTEGER	read-write	check cpu time interval,unit is second
cpuTaskTable	1.3.6.1.4.1.5651.3.20.1.1.3.4		not-accessible	Represents the target's task cpu table. Each entry in this table represents a task
cpuTaskEntry	1.3.6.1.4.1.5651.3.20.1.1.3.4.1		not-accessible	Each entry contains information with regards to a task cpu in the system
I32 cpuTaskId	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.1	Integer32	read-only	This is the task ID assigned by VxWorks to a task in the system. A taskId of zero specifies a new task.
OCT cpuTaskName	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.2	OCTET STRING	read-only	This is the name of the VxWorks task. This value can only be specified (set) at task creation.
I32 cpuTaskPri	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.3	Integer32	read-only	The priority of the VxWorks task. This value can be in the range from 0, the highest priority, to 255, the lowest priority.
I32 cpuTaskDeltaUtil	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.4	Integer32	read-only	The CPU utilization of the VxWorks task during DeltaTicks. This value can be in the range from 0 to 100.
I32 cpuTaskDeltaTicks	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.5	Integer32	read-only	The task CPU utilization delta ticks.
I32 cpuTaskAverageUtil	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.6	Integer32	read-only	The CPU utilization of the VxWorks task during TotalTicks. This value can be in the range from 0 to 100.
I32 cpuTaskTotalTicks	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.7	Integer32	read-only	The total ticks till cpuTaskStatus been start, until the status be end.
I32 cpuTaskCurrentUtil	1.3.6.1.4.1.5651.3.20.1.1.3.4.1.8	Integer32	read-only	The cpu current utilization
cpuUtilTable	1.3.6.1.4.1.5651.3.20.1.1.3.5		not-accessible	The Sys CPU total utilization table
cpuUtilEntry	1.3.6.1.4.1.5651.3.20.1.1.3.5.1		not-accessible	The Sys CPU utilization table at a certain period of time, include two kind of time interval: one is from spy cpu to current show cpu, the other is from last show cpu to current show cpu
I32 cpuUtilCpuId	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.1	Integer32	read-only	cpu id for multi-cpu device
I32 cpuUtilDeltaUtil	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.2	Integer32	read-only	The Sys CPU utilization in delta times
I32 cpuUtilDeltaUsedTicks	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.3	Integer32	read-only	The System used ticks in delta ticks
I32 cpuUtilDeltaTicks	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.4	Integer32	read-only	The Sys CPU utilization ticks in delta times
I32 cpuUtilDeltaTimes	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.5	Integer32	read-only	The delta times, unit is second
I32 cpuUtilAverageUtil	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.6	Integer32	read-only	The Sys CPU utilization in total times
I32 cpuUtilTotalUsedTicks	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.7	Integer32	read-only	The Sys CPU utilization used ticks in total times
I32 cpuUtilTotalTicks	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.8	Integer32	read-only	The Sys CPU utilization ticks in total times
I32 cpuUtilTotalTimes	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.9	Integer32	read-only	The total times, unit is second
I32 cpuUtilCurrentUtil	1.3.6.1.4.1.5651.3.20.1.1.3.5.1.10	Integer32	read-only	The cpu current utilization
sysTemperature	1.3.6.1.4.1.5651.3.20.1.1.4
I32 sysCpuTemper	1.3.6.1.4.1.5651.3.20.1.1.4.1	Integer32	read-only	Get current system environment cpu temperature
I32 sysCpuAlertTemper	1.3.6.1.4.1.5651.3.20.1.1.4.2	Integer32	read-write	Get or set current system environment cpu alarm temperature default is 85��C
I32 sysMainBoardTemper	1.3.6.1.4.1.5651.3.20.1.1.4.3	Integer32	read-only	Get current system environment main borad temperature
I32 sysMainBoardAlertTemper	1.3.6.1.4.1.5651.3.20.1.1.4.4	Integer32	read-write	Get or set current system environment main board alarm temperature default is 65 ��C
I32 sysAlertTrapInt	1.3.6.1.4.1.5651.3.20.1.1.4.5	Integer32	read-write	Send alert trap time interval when system temperature is always more than alert temperature, unit is second,default is 60 s
sysNFI	1.3.6.1.4.1.5651.3.20.1.1.200
sysRtrGbl	1.3.6.1.4.1.5651.3.20.1.1.200.1
ENA sysRtrCtrl	1.3.6.1.4.1.5651.3.20.1.1.200.1.1	EnabledStatus	read-write	RTR global switch enable--enable RTR module disable--no RTR module
T/F sysRtrResponder	1.3.6.1.4.1.5651.3.20.1.1.200.1.2	TruthValue	read-write	Rtr Responder TRUE--Rtr Responder False--no Rtr Responder on valid in jitter entity now
sysRtrEntityMgt	1.3.6.1.4.1.5651.3.20.1.1.200.2
sysRtrEntityTable	1.3.6.1.4.1.5651.3.20.1.1.200.2.100		not-accessible	Rtr entity table,config or view information about Rtr entity
sysRtrEntityEntry	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1		not-accessible	Rtr entity,config or view information about Rtr entity
INT rtrEntityId	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.1	INTEGER	read-write	Rtr entity Id,index
STR rtrEntityName	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.2	DisplayString	read-only	rtr entity name,araised aumatically,read-only
INT rtrEntityType	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.3	INTEGER	read-write	rtr entity,inlcuding icmpEcho,jitter,flow statistics,udpecho
INT rtrEntityLogType	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.4	INTEGER	read-write	RTR entity logging type�� local��stored in the device file system remote��remote services
INT rtrEntityLogMaxSize	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.5	INTEGER	read-write	rtr entity's log with max lines, if log type is local
INT rtrEntityLogFilter	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.6	INTEGER	read-write	RTR entity log filter options
INT rtrEntityThreshold	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.7	INTEGER	read-write	RTR entity log filter threshhod,only valid with icmpEcho entity
ROW rtrEntityRowStatus	1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.8	RowStatus	read-write	rtr entity row status
sysRtrGroupMgt	1.3.6.1.4.1.5651.3.20.1.1.200.3
sysRtrGroupTable	1.3.6.1.4.1.5651.3.20.1.1.200.3.100		not-accessible	Rtr group table
sysRtrGroupEntry	1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1		not-accessible	Rtr group entity
INT rtrGroupId	1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.1	INTEGER	read-write	rtr group id,index
STR rtrGroupName	1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.2	DisplayString	read-only	rtr group name,araised aumatically, read-only
INT rtrGroupInterval	1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.3	INTEGER	read-write	rtr group interval, seconds
STR rtrGroupEntityMembers	1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.4	DisplayString	read-write	RTR group members��string type�� 1��3��10-20��50 string length no more than 255, separated by comma,no space in the string��
ROW rtrGroupRowStatus	1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.5	RowStatus	read-write	rtr group table row status
sysRtrScheduleMgt	1.3.6.1.4.1.5651.3.20.1.1.200.4
sysRtrScheduleTable	1.3.6.1.4.1.5651.3.20.1.1.200.4.100		not-accessible	rtr schedule table
sysRtrScheduleEntry	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1		not-accessible	rtr schedule table entry
U32 rtrScheduleId	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.1	Unsigned32	read-write	rtr schedule Id,index
INT rtrScheduleType	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.2	INTEGER	read-write	rtr schedule type
INT rtrScheduleObjId	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.3	INTEGER	read-write	id of rtrschedule object which means rtr group or entity.
INT rtrScheduleStartTimeFlag	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.4	INTEGER	read-write	RTR schedule start time�� startNow�� afterTime�� startTime--start at the given time
STR rtrScheduleAfterTime	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.5	DisplayString	read-write	RTR schedule given time�� type string�� HH:MM:SS valid when sysRtrScheduleFlag is afterTimeʱ.
STR rtrScheduleStartTime	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.6	DisplayString	read-write	RTR schedule given time�� type string�� HH:MM:SS,mm,dd,yyyy valid when sysRtrScheduleFlag is startTime.
U32 rtrScheduleAgeOut	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.7	Unsigned32	read-write	rtr schedule ageout time in second.
INT rtrScheduleLifeFlag	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.8	INTEGER	read-write	rtr schedule's life forever,if config, no need to config lifetime and repeat times repeatAndDie,if config, need to config lifetime and repeat times
U32 rtrScheduleLifeTime	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.9	Unsigned32	read-write	rtr schedule's lieftime in second, valid only when rtrScheduleLifeFlag is repeatAndDie.
U32 rtrScheduleRepeat	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.10	Unsigned32	read-write	rtr schedule's repeat times, valid only when rtrScheduleLifeFlag is repeatAndDie.
U32 rtrScheduleInterval	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.11	Unsigned32	read-only	rtr schedule interval in second
ROW rtrScheduleRowStatus	1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.12	RowStatus	read-write	rtr schedule row status
sysRtrIcmpEchoMgt	1.3.6.1.4.1.5651.3.20.1.1.200.5
sysRtrIcmpEchoTable	1.3.6.1.4.1.5651.3.20.1.1.200.5.100		not-accessible	RTR ICMP entity table
sysRtrIcmpEchoEntry	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1		not-accessible	RTR ICMP entity entry
INT rtrIcmpEchoEntityId	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.1	INTEGER	read-write	ICMP entity ID,index
IP rtrIcmpEchoTargetIp	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.2	IpAddress	read-write	ICMPECHO(ping) destination address
U32 rtrIcmpEchoPktNum	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.3	Unsigned32	read-write	ICMP PING send packets number once
INT rtrIcmpEchoPktLen	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.4	INTEGER	read-write	ICMP PING send packets size
INT rtrIcmpEchoTimeout	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.5	INTEGER	read-write	ICMP ping reply timeout in seconds.
U32 rtrIcmpEchoSchInterval	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.6	Unsigned32	read-write	IcmpEcho interval in seconds.
T/F rtrIcmpEchoExtendFlag	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.7	TruthValue	read-write	ICMP extern ping flag, have set Tos,verify data,DF,sourceIp and vrf or yet.
STR rtrIcmpEchoVrfName	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.8	DisplayString	read-write	vrfname type string, valid only rtrIcmpEchoExtendFlag is TRUE
IP rtrIcmpEchoSourceIp	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.9	IpAddress	read-write	ICMP source IP address, valid only rtrIcmpEchoExtendFlag is TRUE.
INT rtrIcmpEchoTos	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.10	INTEGER	read-write	ICMP TOS value, valid only rtrIcmpEchoExtendFlag is TRUE.
T/F rtrIcmpEchoSetDf	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.11	TruthValue	read-write	ICMP pakcet DF bit, valid only rtrIcmpEchoExtendFlag is TRUE
T/F rtrIcmpEchoVerifyData	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.12	TruthValue	read-write	ICMP verifay data flag, valid only rtrIcmpEchoExtendFlag is TRUE
T/F rtrIcmpEchoIsScheduling	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.13	TruthValue	read-only	whether icmpEcho entity is in scheduling
C32 rtrIcmpEchoPktTotalSendEx	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.14	Counter32	read-only	total packets which send by the ICMP entity.
C32 rtrIcmpEchoPktTotalRcvd	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.15	Counter32	read-only	total packets which receive by the ICMP entity.
INT rtrIcmpEchoSuccessRate	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.16	INTEGER	read-only	total success rate till now
ROW rtrIcmpEchoRowStatus	1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.17	RowStatus	read-write	ICMP row status
sysRtrJitterMgt	1.3.6.1.4.1.5651.3.20.1.1.200.6
sysRtrJitterTable	1.3.6.1.4.1.5651.3.20.1.1.200.6.100		not-accessible	RTR JITTER entity table
sysRtrJitterEntry	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1		not-accessible	RTR JITTER entity entry
INT rtrJitterEntityId	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.1	INTEGER	read-write	JITTER entity id,index
INT rtrJitterState	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.2	INTEGER	read-only	JITTE entity��1��init��2��close�� 3��send request��4-send packets�� 5��finish
IP rtrJitterTargetIp	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.3	IpAddress	read-write	JITTER responder destination ip address
U32 rtrJitterTargetPort	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.4	Unsigned32	read-write	JITTER responder destination port
INT rtrJitterCodec	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.5	INTEGER	read-write	JITTER codec type,including: 1 G711MULAW,2 G711ALAW,3 G729A,4 USER_DEFINED 5 UNKOWN
INT rtrJitterPktLen	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.6	INTEGER	read-write	JITTER codec packet length, read-writable when rtrJitterCodec is USER_DEFINED else read-only type:byte.
INT rtrJitterPktNum	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.7	INTEGER	read-write	JITTER codec packet number, read-writable when rtrJitterCodec is USER_DEFINED else read-only.
INT rtrJitterPktInterval	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.8	INTEGER	read-write	JITTER codec packet send interval, read-writable when rtrJitterCodec is USER_DEFINED else read-only, type:ms
U32 rtrJitterSchInterval	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.9	Unsigned32	read-write	Jitter schedule interval, read-writable when rtrJitterCodec is USER_DEFINED else read-only, type:s
IP rtrJitterSourceIp	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.10	IpAddress	read-write	JITTER source IP address
U32 rtrJitterSourcePort	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.11	Unsigned32	read-write	JITTER source port
U32 rtrJitterTimeout	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.12	Unsigned32	read-write	JITTER timeout value,type:ms, notice,the value must no less than then interval between two schedule
STR rtrJitterVrfName	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.13	DisplayString	read-write	JITTER vrf
INT rtrJitterTos	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.14	INTEGER	read-write	JITTER pakcet TOS value
INT rtrJitterMinRtt	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.15	INTEGER	read-only	JITTER minimal round-trip-time value in ms
INT rtrJitterMaxRtt	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.16	INTEGER	read-only	JITTER maximal round-trip-time value in ms
INT rtrJitterPktLossSd	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.17	INTEGER	read-only	JITTER total lossed pakcets which send by the source
INT rtrJitterPktLossDs	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.18	INTEGER	read-only	JITTER total loss pakcets which send by the target
INT rtrJitterDsMin	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.19	INTEGER	read-only	JITTER minimal destination to source jitter in millisecond
INT rtrJitterDsMax	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.20	INTEGER	read-only	JITTER maximal destionation to source jitter in millisecond
INT rtrJitterSdMin	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.21	INTEGER	read-only	JITTER minimal source to destination jitter in millisecond
INT rtrJitterSdMax	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.22	INTEGER	read-only	JITTER maximal source to destination jitter in millisecond
INT rtrJitterDelayDsMin	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.23	INTEGER	read-only	JITTER minimal destination to source delay in millisecond
INT rtrJitterDelayDsMax	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.24	INTEGER	read-only	JITTER maximal destination to source delay in millisecond
INT rtrJitterDelaySdMin	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.25	INTEGER	read-only	JITTER minimal souce to destionation delay in millisecond
INT rtrJitterDelaySdMax	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.26	INTEGER	read-only	JITTER maximal source to destination delay in millisecond
STR rtrJitterIcpifMin	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.27	DisplayString	read-only	JITTER minimal icpif
STR rtrJitterIcpifMax	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.28	DisplayString	read-only	JITTER maximal icpif
STR rtrJitterMosMin	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.29	DisplayString	read-only	JITTER minimal MOS
STR rtrJitterMosMax	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.30	DisplayString	read-only	JITTER maximal MOS
ROW rtrJitterRowStatus	1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.31	RowStatus	read-write	JITTER row status
sysRtrFlowStatisticsMgt	1.3.6.1.4.1.5651.3.20.1.1.200.7
sysRtrFlowStatisticsTable	1.3.6.1.4.1.5651.3.20.1.1.200.7.100		not-accessible	RTR flow statistics table
sysRtrFlowStatisticsEntry	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1		not-accessible	RTR flow statistics entry
INT rtrFlStatisticsEntityId	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.1	INTEGER	read-write	flow statistics entity Id
STR rtrFlStatisticsIfName	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.2	DisplayString	read-write	interface name which will be statistic
INT rtrFlStatisticsInterval	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.3	INTEGER	read-write	monitor interval in second
C64 rtrFlStaInputMaxPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.4	Counter64	read-only	maximal pakcets received once sampling period
STR rtrFlStaTmInputMaxPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.5	DisplayString	read-only	maximal time between minimal received packets number and miximal received packets number
C64 rtrFlStaInputMaxFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.6	Counter64	read-only	maximal flow value received
STR rtrFlStaTmInputMaxFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.7	DisplayString	read-only	maximal time between minimal flow value and miximal flow vlaue
C64 rtrFlStaInputMinPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.8	Counter64	read-only	minimal pakcets received once sampling period
STR rtrFlStaTmInputMinPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.9	DisplayString	read-only	minimal time between minimal packets number and miximal packets number
C64 rtrFlStaInputMinFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.10	Counter64	read-only	minimal flow value received
STR rtrFlStaTmInputMinFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.11	DisplayString	read-only	minimal time between minimal flow value and miximal flow vlaue
C64 rtrFlStaOutputMaxPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.12	Counter64	read-only	maximal pakcets send once sampling period
STR rtrFlStaTmOutputMaxPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.13	DisplayString	read-only	maximal time between minimal send packets number and miximal send packets number
C64 rtrFlStaOutputMaxFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.14	Counter64	read-only	maximal flow send
STR rtrFlStaTmOutputMaxFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.15	DisplayString	read-only	maximal time between minimal send flow and miximal send flow
C64 rtrFlStaOutputMinPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.16	Counter64	read-only	minimal pakcets send once sampling period
STR rtrFlStaTmOutputMinPkts	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.17	DisplayString	read-only	minimal time between minimal send packets number and miximal send packets number
C64 rtrFlStaOutputMinFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.18	Counter64	read-only	minimal flow send
STR rtrFlStaTmOutputMinFlow	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.19	DisplayString	read-only	minimal time between minimal send flow and miximal send flow
ROW rtrFlowStatisticsRowStatus	1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.20	RowStatus	read-write	flow statistics row status
sysRtrUdpechoMgt	1.3.6.1.4.1.5651.3.20.1.1.200.8
sysRtrUdpechoTable	1.3.6.1.4.1.5651.3.20.1.1.200.8.100		not-accessible	RTR UDPECHO entity table
sysRtrUdpechoEntry	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1		not-accessible	RTR UDPECHO entity entry
INT rtrUdpechoEntityId	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.1	INTEGER	read-write	UDPECHO entity id,index
INT rtrUdpechoState	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.2	INTEGER	read-only	UDPECHO entity��1��init��2��close�� 3��send request��4-send packets�� 5��finish
IP rtrUdpechoTargetIp	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.3	IpAddress	read-write	UDPECHO responder destination ip address
U32 rtrUdpechoTargetPort	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.4	Unsigned32	read-write	UDPECHO responder destination port
INT rtrUdpechoPktLen	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.5	INTEGER	read-write	UDPECHO packet length
U32 rtrUdpechoSchInterval	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.6	Unsigned32	read-write	UDPECHO schedule interval, type:s
IP rtrUdpechoSourceIp	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.7	IpAddress	read-write	UDPECHO source IP address
U32 rtrUdpechoSourcePort	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.8	Unsigned32	read-write	UDPECHO source port
U32 rtrUdpechoTimeout	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.9	Unsigned32	read-write	UDPECHO timeout value,type:ms, notice,the value must no less than then interval between two schedule
STR rtrUdpechoVrfName	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.10	DisplayString	read-write	UDPECHO vrf
INT rtrUdpechoTos	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.11	INTEGER	read-write	UDPECHO pakcet TOS value
INT rtrUdpechoPktLoss	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.12	INTEGER	read-only	UDPECHO total lossed pakcets which send by the source
INT rtrUdpechoPktSucc	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.13	INTEGER	read-only	UDPECHO total pakcets sent and received successfully
INT rtrUdpechoDelay	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.14	INTEGER	read-only	UDPECHO destination to source and source to destinatino delay in millisecond
INT rtrUdpechoDelayMin	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.15	INTEGER	read-only	UDPECHO maximal destination to source and source to destinatino delay in millisecond
INT rtrUdpechoDelayMax	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.16	INTEGER	read-only	UDPECHO maximal destination to source and source to destinatino delay in millisecond
ROW rtrUdpechoRowStatus	1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.17	RowStatus	read-write	UDPECHO row status
sysIfStatistic	1.3.6.1.4.1.5651.3.20.1.1.300
sysIfPktPriStatistics	1.3.6.1.4.1.5651.3.20.1.1.300.1
sysIfPktPriStaTable	1.3.6.1.4.1.5651.3.20.1.1.300.1.100		not-accessible	The statistics of interface's flow based on the precedence of IP packet. The index of this table is priority and ifIndex
sysIfPktPriStaEntry	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1		not-accessible	The statistics of interface's flow based on the precedence of IP packet. The index of this table is priority and ifIndex
INT sysIfPktPriority	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.1	INTEGER	read-only	The precedence of IP packet, it start from 1 to 9. Numeric one represent the precedence 0, two represent 1 and so on. 9 represent the number of non-IP packet.
INT sysIfIndex	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.2	INTEGER	read-only	The index of interface in the system
STR sysIfDesc	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.3	DisplayString	read-only	The name of interface assigned to
CTR sysIfInOctets	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.4	Counter	read-only	The interface received bytes at specified precedence
CTR sysIfInUcastPkts	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.5	Counter	read-only	The number of subnetwork-unicast packets delivered to a higher-layer protocol with specified precedence.
CTR sysIfInNUcastPkts	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.6	Counter	read-only	The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
CTR sysIfInDiscards	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.7	Counter	read-only	The number of inbound packets which were chosen to be discarded
CTR sysIfInErrors	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.8	Counter	read-only	The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
CTR sysIfInUnkownProtos	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.9	Counter	read-only	The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
CTR sysIfOutOctets	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.10	Counter	read-only	The total number of octets transmitted out of the interface, including framing characters.
CTR sysIfOutUcastPkts	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.11	Counter	read-only	The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
CTR sysIfOutNUcastPkts	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.12	Counter	read-only	The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
CTR sysIfOutDiscards	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.13	Counter	read-only	The number of outbound packets which were chosen to be even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
CTR sysIfOutErrors	1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.14	Counter	read-only	The number of outbound packets that could not be transmitted because of errors.

RFC description

Provides process and memory information for Maipu MP2600 VxWorks system monitoring.

Start monitoring Maipu MP2600 router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MPIOS-MIB