Nortel-Magellan-Passport-DpnRoutingMIB :: rtgDpnDelayMetricRangeBoundary

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DpnRoutingMIB › rtgDpnDelayMetricRangeBoundary

rtgDpnDelayMetricRangeBoundary

Module: Nortel-Magellan-Passport-DpnRoutingMIB

OID (symbolic): Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricRangeBoundary

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.4.11.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the total path delay metric below which the variance value specified for delay COS and a low metric range is used, and at or above which the variance value specified for delay COS and a high metric range is used.

This attribute defaults to 0, so that the variance value specified for delay COS and a high metric range is used for all delay paths. If this attribute is set to 2147483647, the variance value specified for delay COS and a low metric range is used for all delay paths.

What is rtgDpnDelayMetricRangeBoundary?

Sets the total delay-path metric threshold that decides whether the low- or high-range variance value applies for the delay class of service. Left at its default of 0, the high-range variance always applies; setting it to the maximum makes the low-range variance apply to every path instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.7
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricRangeBoundary

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.7.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricRangeBoundary.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.4.11.1.7.1 i <value>

Start monitoring Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DpnRoutingMIB::rtgDpnDelayMetricRangeBoundary OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport DPN/X.25 packet switch (DPN routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.4rtgDpnNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11rtgDpnProvTableNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1rtgDpnProvEntryNortel-Magellan-Passport-DpnRoutingMIB
1.3.6.1.4.1.562.2.4.1.40.4.11.1.7rtgDpnDelayMetricRangeBoundaryNortel-Magellan-Passport-DpnRoutingMIB