All MIBs › NATEKS-MIB
Organization: Nateks Group
Last Updated: 2016-11-22
Category: Hardware Inventory, Products/Registration
Description: Manages Nateks Group networking equipment configuration and operational status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NATEKS-MIB?
NATEKS-MIB is a Nateks Group (enterprise OID 4249, Russian telecom access-equipment vendor) proprietary MIB reporting system identity, alarms, and generic configuration-value management. Its objects cover a system-alarm flag, system-reset action, model/ID, hardware/software version and date, module type, subrack address, error code, serial number, config read-write/default/count settings, and a config-value table (ID, group, name, group name, type, status, startup/running/new value) alongside a stats-reset action. As a configuration/status MIB it lets an administrator confirm firmware version and audit configuration parameters that differ between startup and running state on a Nateks access device. It is deployed on Nateks Group access equipment. Engineers can download the NATEKS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in NATEKS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nateks Group access equipment
Monitoring Examples
An administrator compares valueStartup against valueRunning in the config-value table to confirm which parameters changed since the last reboot on a Nateks access device.
What Can Be Monitored
- system alarms and startup-vs-running configuration values
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndex |
From RFC1213-MIB
| ifDescr |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using ifG826EB OID:
Select a Nateks Group access equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ifG826EB into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of errored blocks. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nateks | 1.3.6.1.4.1.4249 | Added statReset to stats branch | ||
| nateksTraps | 1.3.6.1.4.1.4249.0 | |||
| NTF tlmStatusChange | 1.3.6.1.4.1.4249.0.1 | A tlmStatusChange trap is sent when the value of an instance tlmStatus changes. It can be utilized by an NMS to trigger polls. | ||
| NTF alarmValueChange | 1.3.6.1.4.1.4249.0.2 | A alarmValueChange trap is sent when alarm value changes. It can be utilized by an NMS to trigger polls. | ||
| NTF tftpStatusChange | 1.3.6.1.4.1.4249.0.3 | This trap is sent during the process of SNMP-initiated TFTP maintenance command (TFTP software download or configuration up/download) to report current execution status. In this case tftpLastOp shows the current operation, tftpLastOpTime indicates starting time of current operation, tftpTransferStatus indicates status of the transfer. If the command is denied, this trap is also sent with tftpTransferStatus value of busyByOther. In this case tftpLastOp indicates the operation that conflicted with the command. | ||
| NTF macFilterViolation | 1.3.6.1.4.1.4249.0.4 | This trap is sent to indicate that MAC filter access violation has happened and specific security action will be performed. Variables: macFilterViolationsIfIndex, ifDescr - index and name of interface; macFilterViolationsMAC - violating MAC; macFilterConfigAction - action to be performed. | ||
| NTF dInStateChange | 1.3.6.1.4.1.4249.0.5 | This trap is sent to indicate that input state has changed. | ||
| NTF dOutStateChange | 1.3.6.1.4.1.4249.0.6 | This trap is sent to indicate that output state has changed. | ||
| nateksProducts | 1.3.6.1.4.1.4249.1 | |||
| megatrans3CLTU | 1.3.6.1.4.1.4249.1.1 | |||
| orion2LTU | 1.3.6.1.4.1.4249.1.7 | |||
| megatrans3CRGN | 1.3.6.1.4.1.4249.1.8 | |||
| megatrans4LTU | 1.3.6.1.4.1.4249.1.11 | |||
| megatrans4RGN | 1.3.6.1.4.1.4249.1.12 | |||
| orion3LTU | 1.3.6.1.4.1.4249.1.22 | |||
| orion3NTU | 1.3.6.1.4.1.4249.1.23 | |||
| orion3repeater | 1.3.6.1.4.1.4249.1.24 | |||
| miniFlex | 1.3.6.1.4.1.4249.1.26 | |||
| nateksMgmt | 1.3.6.1.4.1.4249.2 | |||
| INT systemAlarm | 1.3.6.1.4.1.4249.2.1 | INTEGER | read-only | Device alarm state |
| INT systemReset | 1.3.6.1.4.1.4249.2.2 | INTEGER | read-write | Writing reset(1) to maintReset perform a restart of the device. Read always returns readValue(2). |
| common | 1.3.6.1.4.1.4249.2.3 | |||
| STR model | 1.3.6.1.4.1.4249.2.3.1 | DisplayString | read-only | Model name, for example MGS-3C-RGN. It is mandatory that this only contain printable ASCII characters. |
| STR id | 1.3.6.1.4.1.4249.2.3.2 | DisplayString | read-write | Device ID, displayed in the main menu of the module. It is mandatory that this only contain printable ASCII characters. |
| STR hardwareVersion | 1.3.6.1.4.1.4249.2.3.3 | DisplayString | read-only | Version of the device's hardware. For examle: 1.0 |
| STR softwareVersion | 1.3.6.1.4.1.4249.2.3.4 | DisplayString | read-only | Version of the device's main software and, optionally, versions of firmware loaded in DSL chipsets, etc. (if present). For examle: 3.5.0.5.9/5.0 |
| STR softwareDate | 1.3.6.1.4.1.4249.2.3.5 | DisplayString | read-only | Build date of the device's main software in MM.DD.YYYY format. Empty string, if build date is not maintained by devices software. |
| INT moduleType | 1.3.6.1.4.1.4249.2.3.6 | INTEGER | read-only | Module type |
| I32 subrackAddress | 1.3.6.1.4.1.4249.2.3.7 | Integer32 | read-only | Address of the module in the FlexGain cassette. For modules that do not have such an address, a value of 0 is returned. |
| I32 errorCode | 1.3.6.1.4.1.4249.2.3.8 | Integer32 | read-only | Device-dependent error code. Normal value for errorCode is 0, i.e. device is fully operational. Any non-zero value indicates device hardware fault to management software. |
| STR serialNumber | 1.3.6.1.4.1.4249.2.3.9 | DisplayString | read-only | Device serial number. |
| config | 1.3.6.1.4.1.4249.2.4 | |||
| OCT configRW | 1.3.6.1.4.1.4249.2.4.1 | OCTET STRING | read-write | Reading configRW results in reading the whole running config (as DUMP R in Megatrans 3C does). Writing configRW results in writing to startup config (as LOAD in Megatrans 3C does). This variable may be also used by devices, that do not maintain configValueTable and configGroupTable, to get/set their configuration. |
| NUM configDefault | 1.3.6.1.4.1.4249.2.4.2 | IntegerNumber | read-write | Writing integer value to configDefault applies default profile to the configuration. Values and contents of default profiles are device-dependent. |
| configSystem | 1.3.6.1.4.1.4249.2.4.100 | |||
| NUM configNumberValues | 1.3.6.1.4.1.4249.2.4.100.1 | IntegerNumber | read-only | Number of configuration values in device's configuration. |
| configValueTable | 1.3.6.1.4.1.4249.2.4.100.2 | not-accessible | A list of configuration values. The number of entries is given by the value of configSize. | |
| configValueEntry | 1.3.6.1.4.1.4249.2.4.100.2.1 | not-accessible | Configuration item. | |
| NUM valueId | 1.3.6.1.4.1.4249.2.4.100.2.1.1 | IntegerIndex | not-accessible | A unique index of configuration value. It is constant at least until main software of the module changes. |
| NUM valueGroup | 1.3.6.1.4.1.4249.2.4.100.2.1.2 | IntegerIndex | read-only | Index of values' configuration group in the configGroupTable. |
| STR valueName | 1.3.6.1.4.1.4249.2.4.100.2.1.3 | DisplayString | read-only | A unique name of configuration value. It is constant at least until main software of the module changes. Usually, it remains constant through the lifecycle of the product. |
| STR valueGroupName | 1.3.6.1.4.1.4249.2.4.100.2.1.4 | DisplayString | read-only | Name of values' configuration group. |
| INT valueType | 1.3.6.1.4.1.4249.2.4.100.2.1.5 | INTEGER | read-only | Value type. |
| INT valueStatus | 1.3.6.1.4.1.4249.2.4.100.2.1.6 | INTEGER | read-only | Change status for a value. All values of valueType setNow(1) have unchanged(1) status. Status for values of valueType applyConfirm(2): Initially, all values have unchanged(1) status. When value is changed in new configuration, valueStatus is changed(2). When APPLY is made in respect of a value, valueStatus is applied(3). When CONFIRM is made for a value, valueStatus returns to unchanged(1). Status for values of type afterReset: If valueStartup is different from valueRunning, valueStatus is changed(2), otherwise unchanged(1). |
| OCT valueStartup | 1.3.6.1.4.1.4249.2.4.100.2.1.7 | OCTET STRING | read-write | Startup value of configuration variable. Write operation changes valueStartup for values of valueType afterReset(3), valueRunning for values of valueType setNow(1), valueNew for values of valueType applyConfirm(2). |
| OCT valueRunning | 1.3.6.1.4.1.4249.2.4.100.2.1.8 | OCTET STRING | read-write | Running value of configuration variable. Write operation changes valueStartup for values of valueType afterReset(3), valueRunning for values of valueType setNow(1), valueNew for values of valueType applyConfirm(2). |
| OCT valueNew | 1.3.6.1.4.1.4249.2.4.100.2.1.9 | OCTET STRING | read-write | New value of configuration variable. Write operation changes valueStartup for values of valueType afterReset(3), valueRunning for values of valueType setNow(1), valueNew for values of valueType applyConfirm(2). |
| OCT valueBackup | 1.3.6.1.4.1.4249.2.4.100.2.1.10 | OCTET STRING | read-only | Backup value of configuration variable. |
| NUM configNumberGroups | 1.3.6.1.4.1.4249.2.4.100.3 | IntegerNumber | read-only | Number of configuration groups in device's configuration. |
| configGroupTable | 1.3.6.1.4.1.4249.2.4.100.4 | not-accessible | A list of configuration values. The number of entries is given by the value of configSize. | |
| configGroupEntry | 1.3.6.1.4.1.4249.2.4.100.4.1 | not-accessible | Configuration group. | |
| NUM groupId | 1.3.6.1.4.1.4249.2.4.100.4.1.1 | IntegerIndex | not-accessible | A unique index of configuration group. It is constant at least until main software of the module changes. |
| STR groupName | 1.3.6.1.4.1.4249.2.4.100.4.1.2 | DisplayString | read-only | Name of configuration group. It is constant at least until main software of the module changes. Usually, it remains constant through the lifecycle of the product. |
| INT groupType | 1.3.6.1.4.1.4249.2.4.100.4.1.3 | INTEGER | read-only | Group type. |
| INT groupStatus | 1.3.6.1.4.1.4249.2.4.100.4.1.4 | INTEGER | read-write | Change status for a groupvalue. All groups of groupType setNow(1) have unchanged(1) status. Status for groups of groupType applyConfirm(2): Initially, all values have unchanged(1) status. When some of group values are changed in new configuration, groupStatus is changed(2). When APPLY is made for a group, groupStatus is applied(3). When CONFIRM is made for a group, groupStatus returns to unchanged(1). Status for groups of type afterReset: If startup values in the group are different from running values, groupStatus is changed(2), otherwise unchanged(1). Writing applied(3) to the groupStatus makes APPLY operation on a group. APPLY operation is allowed only for groups of groupType applyConfirm(2). Other write operations should report error. |
| INT configApplyAll | 1.3.6.1.4.1.4249.2.4.100.5 | INTEGER | read-write | Writing applyAll(1) to configApplyAll makes APPLY ALL operation. Read always returns readValue(2). |
| INT configConfirm | 1.3.6.1.4.1.4249.2.4.100.6 | INTEGER | read-write | Writing confirm(1) to configConfirm makes CONFIRM operation. Read always returns readValue(2). |
| INT configBackup | 1.3.6.1.4.1.4249.2.4.100.7 | INTEGER | read-write | Writing backup(1) to configBackup performs BACKUP operation. Read always returns readValue(2). |
| INT configRestore | 1.3.6.1.4.1.4249.2.4.100.8 | INTEGER | read-write | Writing restore(1) to configRestore performs RESTORE operation. Read always returns readValue(2). |
| stats | 1.3.6.1.4.1.4249.2.5 | |||
| g826 | 1.3.6.1.4.1.4249.2.5.1 | |||
| NUM g826Number | 1.3.6.1.4.1.4249.2.5.1.1 | IntegerNumber | read-only | Number of g826 statistics. |
| g826Table | 1.3.6.1.4.1.4249.2.5.1.2 | not-accessible | A list of g826 statistics. Each consists of an interface index in interfaces table, statistics name and g826 statistics valuess. | |
| g826Entry | 1.3.6.1.4.1.4249.2.5.1.2.1 | not-accessible | G826 statistics. | |
| NUM g826Id | 1.3.6.1.4.1.4249.2.5.1.2.1.1 | IntegerIndex | not-accessible | A unique index of this g826 statistics. It is constant at least between device reboots. |
| NUM g826IfIndex | 1.3.6.1.4.1.4249.2.5.1.2.1.2 | InterfaceIndex | read-only | Index of interface in interfaces table, this g826 statistics is for. |
| STR g826Name | 1.3.6.1.4.1.4249.2.5.1.2.1.3 | DisplayString | read-only | Name of the statistic, for example: E1-1-CRC4, E1-2-E-Bit. |
| G32 g826EB | 1.3.6.1.4.1.4249.2.5.1.2.1.4 | Gauge32 | read-only | Number of errored blocks. |
| G32 g826ES | 1.3.6.1.4.1.4249.2.5.1.2.1.5 | Gauge32 | read-only | Number of errored seconds. |
| G32 g826SES | 1.3.6.1.4.1.4249.2.5.1.2.1.6 | Gauge32 | read-only | Number of severely errored seconds. |
| G32 g826BBE | 1.3.6.1.4.1.4249.2.5.1.2.1.7 | Gauge32 | read-only | Number of background block errors. |
| G32 g826AvailableTime | 1.3.6.1.4.1.4249.2.5.1.2.1.8 | Gauge32 | read-only | Available time in seconds. |
| G32 g826UnavailableTime | 1.3.6.1.4.1.4249.2.5.1.2.1.9 | Gauge32 | read-only | Unavailable time in seconds. |
| INT g826StatReset | 1.3.6.1.4.1.4249.2.5.1.2.1.10 | INTEGER | read-write | Writing reset(1) to g826StatReset restarts this g826 statistic. Read always returns readValue(2). |
| INT g826Reset | 1.3.6.1.4.1.4249.2.5.1.3 | INTEGER | read-write | Writing reset(1) to g826Reset restarts all g826 statistics. Read always returns readValue(2). |
| ifG826Table | 1.3.6.1.4.1.4249.2.5.1.4 | not-accessible | A list of g826 statistics. Each consists of an interface index in interfaces table, statistics name and g826 statistics valuess. | |
| ifG826Entry | 1.3.6.1.4.1.4249.2.5.1.4.1 | not-accessible | G826 statistics grouped by interface. | |
| NUM ifG826Id | 1.3.6.1.4.1.4249.2.5.1.4.1.1 | IntegerIndex | not-accessible | A unique index of this g826 statistics. It is constant at least between device reboots. |
| NUM ifG826IfIndex | 1.3.6.1.4.1.4249.2.5.1.4.1.2 | InterfaceIndex | not-accessible | Index of interface in interfaces table, this g826 statistics is for. |
| STR ifG826Name | 1.3.6.1.4.1.4249.2.5.1.4.1.3 | DisplayString | read-only | Name of the statistic, for example: E1-1-CRC4, E1-2-E-Bit. |
| G32 ifG826EBEx | 1.3.6.1.4.1.4249.2.5.1.4.1.4 | Gauge32 | read-only | Number of errored blocks. |
| G32 ifG826ES | 1.3.6.1.4.1.4249.2.5.1.4.1.5 | Gauge32 | read-only | Number of errored seconds. |
| G32 ifG826SES | 1.3.6.1.4.1.4249.2.5.1.4.1.6 | Gauge32 | read-only | Number of severely errored seconds. |
| G32 ifG826BBE | 1.3.6.1.4.1.4249.2.5.1.4.1.7 | Gauge32 | read-only | Number of background block errors. |
| G32 ifG826AvailableTime | 1.3.6.1.4.1.4249.2.5.1.4.1.8 | Gauge32 | read-only | Available time in seconds. |
| G32 ifG826UnavailableTime | 1.3.6.1.4.1.4249.2.5.1.4.1.9 | Gauge32 | read-only | Unavailable time in seconds. |
| INT ifG826StatReset | 1.3.6.1.4.1.4249.2.5.1.4.1.10 | INTEGER | read-write | Writing reset(1) to ifG826StatReset restarts this g826 statistic. Read always returns readValue(2). |
| alarms | 1.3.6.1.4.1.4249.2.5.2 | |||
| NUM alarmNumber | 1.3.6.1.4.1.4249.2.5.2.1 | IntegerNumber | read-only | Number of alarms. |
| alarmTable | 1.3.6.1.4.1.4249.2.5.2.2 | not-accessible | A list of alarms. Each consists of an interface index in interfaces table, alarm name, value and cutoff information. | |
| alarmEntry | 1.3.6.1.4.1.4249.2.5.2.2.1 | not-accessible | Alarms. | |
| NUM alarmId | 1.3.6.1.4.1.4249.2.5.2.2.1.1 | IntegerIndex | read-only | A unique index of alarm. It is constant at least between device reboots. |
| NUM alarmIfIndex | 1.3.6.1.4.1.4249.2.5.2.2.1.2 | InterfaceIndex | read-only | Index of interface in interfaces table, which state this alarm indicates. Alarms, that do not have associated interfaces (for example, maintenance alarms), should have index of management interface as alarmIfIndex. |
| STR alarmName | 1.3.6.1.4.1.4249.2.5.2.2.1.3 | DisplayString | read-only | Name of the alarm, for example: LOS-S, BER-H. |
| INT alarmValue | 1.3.6.1.4.1.4249.2.5.2.2.1.4 | INTEGER | read-only | Alarm status. |
| INT alarmCutoff | 1.3.6.1.4.1.4249.2.5.2.2.1.5 | INTEGER | read-only | Alarm cutoff status. |
| BIT alarmType | 1.3.6.1.4.1.4249.2.5.2.2.1.6 | Bits | read-only | Alarm type. If none of alarm types is applicable to this alarm, all bits are zero. |
| INT alarmDisplayType | 1.3.6.1.4.1.4249.2.5.2.2.1.7 | INTEGER | read-only | Simplified alarm type to be used in trap filters |
| INT alarmTrapEnable | 1.3.6.1.4.1.4249.2.5.2.3 | INTEGER | read-write | Alarm trap generation setup: changes in alarm state will cause trap generation when the alarmTrapEnable is true. |
| ifAlarmTable | 1.3.6.1.4.1.4249.2.5.2.4 | not-accessible | A two-dimentional array of alarms. Alarms are grouped by interface number. | |
| ifAlarmEntry | 1.3.6.1.4.1.4249.2.5.2.4.1 | not-accessible | Alarms grouped by interface. | |
| NUM ifAlarmId | 1.3.6.1.4.1.4249.2.5.2.4.1.1 | IntegerIndex | read-only | A unique index of alarm within interface. It is constant at least between device reboots. |
| NUM ifAlarmIfIndex | 1.3.6.1.4.1.4249.2.5.2.4.1.2 | InterfaceIndex | read-only | Index of interface in interfaces table, which state this alarm indicates. Alarms, that do not have associated interfaces (for example, maintenance alarms), should have index of management interface as alarmIfIndex. |
| STR ifAlarmName | 1.3.6.1.4.1.4249.2.5.2.4.1.3 | DisplayString | read-only | Name of the alarm, for example: LOS-S, BER-H. |
| INT ifAlarmValue | 1.3.6.1.4.1.4249.2.5.2.4.1.4 | INTEGER | read-only | Alarm status. |
| INT ifAlarmCutoff | 1.3.6.1.4.1.4249.2.5.2.4.1.5 | INTEGER | read-only | Alarm cutoff status. |
| BIT ifAlarmType | 1.3.6.1.4.1.4249.2.5.2.4.1.6 | Bits | read-only | Alarm type. If none of alarm types is applicable to this alarm, all bits are zero. |
| INT ifAlarmDisplayType | 1.3.6.1.4.1.4249.2.5.2.4.1.7 | INTEGER | read-only | Simplified alarm type to be used in trap filters |
| tlm | 1.3.6.1.4.1.4249.2.5.3 | |||
| NUM tlmNumber | 1.3.6.1.4.1.4249.2.5.3.1 | IntegerNumber | read-only | Number of tlm contacts. |
| tlmTable | 1.3.6.1.4.1.4249.2.5.3.2 | not-accessible | A list of tlms. Each consists of tlm name, setup and status information, and trap generation setup. | |
| tlmEntry | 1.3.6.1.4.1.4249.2.5.3.2.1 | not-accessible | TLM | |
| NUM tlmId | 1.3.6.1.4.1.4249.2.5.3.2.1.1 | IntegerIndex | not-accessible | A unique index of TLM. It is constant at least between device reboots. |
| STR tlmName | 1.3.6.1.4.1.4249.2.5.3.2.1.2 | DisplayString | read-only | Name of the TLM. |
| INT tlmStatus | 1.3.6.1.4.1.4249.2.5.3.2.1.3 | INTEGER | read-only | The status of the TLM: on, off or detected. |
| TIK tlmLastStatusChange | 1.3.6.1.4.1.4249.2.5.3.2.1.4 | TimeTicks | read-only | The time of last TLM status change, counted from system start. |
| INT tlmSetup | 1.3.6.1.4.1.4249.2.5.3.2.1.5 | INTEGER | read-write | TLM setup: normally open or normally closed. Writing to this variable will configure this TLM, if the device does support the write access to this variable. |
| INT tlmTrapEnable | 1.3.6.1.4.1.4249.2.5.3.2.1.6 | INTEGER | read-write | TLM trap generation setup: changes in TLM status will cause trap generation when the tlmTrapEnable is true. |
| INT tlmClear | 1.3.6.1.4.1.4249.2.5.3.3 | INTEGER | read-write | Writing reset(1) to tlmClear will clear the TLM history, and det state of all TLM indicators will become off state. Read always returns readValue(2). |
| dsl | 1.3.6.1.4.1.4249.2.5.4 | |||
| NUM dslChannelNumber | 1.3.6.1.4.1.4249.2.5.4.1 | IntegerNumber | read-only | Number of dsl channels. |
| INT dslUnitType | 1.3.6.1.4.1.4249.2.5.4.2 | INTEGER | read-only | The type of the unit: line termination units (LTU) and network termination units (NTU) will have the modem(1) value. All types of regenerators have regenerator(2) value. |
| dslChannelTable | 1.3.6.1.4.1.4249.2.5.4.3 | not-accessible | A list of DSL channels present on this device. Each consists of DSL index, ifIndex, setup and status information. | |
| dslChannelEntry | 1.3.6.1.4.1.4249.2.5.4.3.1 | not-accessible | DSL channel | |
| NUM dslChannelId | 1.3.6.1.4.1.4249.2.5.4.3.1.1 | IntegerIndex | not-accessible | A unique index of the DSL channel. It is constant for a given model. |
| NUM dslChannelIfIndex | 1.3.6.1.4.1.4249.2.5.4.3.1.2 | InterfaceIndex | read-only | Index in interfaces table of this DSL channel. |
| INT dslChannelMode | 1.3.6.1.4.1.4249.2.5.4.3.1.3 | INTEGER | read-only | The activation mode of this channel: either it is Master (xU-C) or Slave (xU-R). |
| INT dslChannelStandard | 1.3.6.1.4.1.4249.2.5.4.3.1.4 | INTEGER | read-only | The G.Shdsl mode this channel is working in. |
| INT dslChannelClockReference | 1.3.6.1.4.1.4249.2.5.4.3.1.5 | INTEGER | read-only | The G.Shdsl clock mode this channel is working in. |
| INT dslChannelLineCodeConfig | 1.3.6.1.4.1.4249.2.5.4.3.1.6 | INTEGER | read-only | The configured line code of this channel. |
| INT dslChannelPSDConfig | 1.3.6.1.4.1.4249.2.5.4.3.1.7 | INTEGER | read-only | The configured PSD mask (annex) of this channel. |
| I32 dslChannelBaserateConfig | 1.3.6.1.4.1.4249.2.5.4.3.1.8 | Integer32 | read-only | The configured base data rate (in 64kbit/s units) of this channel. 0 means auto. |
| INT dslChannelStatus | 1.3.6.1.4.1.4249.2.5.4.3.1.9 | INTEGER | read-only | The activation status of this DSL channel. |
| INT dslChannelLineCode | 1.3.6.1.4.1.4249.2.5.4.3.1.10 | INTEGER | read-only | Current working line code of this channel. If the link is down, this item has notAvailable(0) value. |
| INT dslChannelPSD | 1.3.6.1.4.1.4249.2.5.4.3.1.11 | INTEGER | read-only | Current working PSD mask (annex) of this channel. If the link is down, this item has notAvailable(0) value. |
| I32 dslChannelBaserate | 1.3.6.1.4.1.4249.2.5.4.3.1.12 | Integer32 | read-only | Current working base data rate (in 64kbit/s units) of this channel. If the link is down, this item has 0 value. |
| I32 dslChannelLineRate | 1.3.6.1.4.1.4249.2.5.4.3.1.13 | Integer32 | read-only | Current working line rate in kbit/s of this channel. If the link is down, this item has 0 value. |
| I32 dslChannelPayloadRate | 1.3.6.1.4.1.4249.2.5.4.3.1.14 | Integer32 | read-only | Current working payload rate in kbit/s of this channel. If the link is down, this item has 0 value. |
| I32 dslChannelNMR | 1.3.6.1.4.1.4249.2.5.4.3.1.15 | Integer32 | read-only | Current noise margin rate for the DSL channel in dB. |
| I32 dslChannelPowerBackoff | 1.3.6.1.4.1.4249.2.5.4.3.1.16 | Integer32 | read-only | Current power backoff of the local side of the DSL channel in dB. |
| I32 dslChannelFarEndPowerBackoff | 1.3.6.1.4.1.4249.2.5.4.3.1.17 | Integer32 | read-only | Current far end power backoff of the DSL channel in dB. |
| I32 dslChannelLoopAttenuation | 1.3.6.1.4.1.4249.2.5.4.3.1.18 | Integer32 | read-only | Current loop attenuation of the DSL channel in dB. |
| NUM dslChannelEOCNumber | 1.3.6.1.4.1.4249.2.5.4.3.1.19 | IntegerIndex | read-only | The EOC number of the unit in this DSL link. xtuC 1 xtuR 2 repeater N=1..max N+2 |
| NUM dslChannelRegeneratorNumber | 1.3.6.1.4.1.4249.2.5.4.3.1.20 | IntegerNumber | read-only | The number of regenerators in the link. This unit is not present on regenerators. |
| INT dslChannelRemotePower | 1.3.6.1.4.1.4249.2.5.4.3.1.21 | INTEGER | read-only | The remote power status of the channel. This item is not present on regenerators. On devices without remote powering capability it is present and always shows off(2). on(1) means the remote power is turned on in configuration and remote power in turned on. off(2) means the remote power is turned off in configuration or remote power capability is not present in the device. alarm(3) means remote power is turned off for a certain amount of time because overcurrent protection has triggered or AC/DC leakage threshold was met. |
| I32 dslChannelRemotePowerVoltage | 1.3.6.1.4.1.4249.2.5.4.3.1.22 | Integer32 | read-only | Remote power voltage configuration for the channel. This item is not present on regenerators. On devices without remote powering capability it is present and always shows 0. If remote power is turned off for this channel in configuration, 0 is read from this item. If remote power is turned on for this channel in configuration, remote power nominal voltage is read from this item regardless of error status (it may be off due to overcurrent etc). This item appeared in MIB v0.9 and some devices may not support it. |
| NUM dslGroupNumber | 1.3.6.1.4.1.4249.2.5.4.4 | IntegerNumber | read-only | The number of multiwire groups. |
| dslGroupTable | 1.3.6.1.4.1.4249.2.5.4.5 | not-accessible | This table contains information on multipair and 4-wire goups of DSL channels. | |
| dslGroupEntry | 1.3.6.1.4.1.4249.2.5.4.5.1 | not-accessible | DSL multipair of 4-wire group | |
| NUM dslGroupId | 1.3.6.1.4.1.4249.2.5.4.5.1.1 | IntegerIndex | not-accessible | A unique index of the DSL channel group. It is constant between changes of unit configuration. |
| INT dslGroupType | 1.3.6.1.4.1.4249.2.5.4.5.1.2 | INTEGER | read-only | The type of channel grouping. type4wire(1) represent 4-wire method of channel aggregation. type2pair(2)-type4pair(4) represent the M-pair method of channel aggregation. |
| NUM dslGroupMainChannel | 1.3.6.1.4.1.4249.2.5.4.5.1.3 | IntegerIndex | read-only | This is the dslChannelId of the main channel in the multipair or 4-wire group. The configuration for all channels in the group is taken from the main channel. Only the main channel is mentioned in regenerator pairs when regenerator is working in multipair mode. |
| NUM dslGroupChannel1 | 1.3.6.1.4.1.4249.2.5.4.5.1.4 | IntegerIndex | read-only | The first channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others. |
| NUM dslGroupChannel2 | 1.3.6.1.4.1.4249.2.5.4.5.1.5 | IntegerIndex | read-only | The second channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others. |
| NUM dslGroupChannel3 | 1.3.6.1.4.1.4249.2.5.4.5.1.6 | IntegerIndex | read-only | The third channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others. Only present for 3-pair and 4-pair groups. |
| NUM dslGroupChannel4 | 1.3.6.1.4.1.4249.2.5.4.5.1.7 | IntegerIndex | read-only | The fourth channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others. Only present for 4-pair groups. |
| NUM dslRegenerationChannels | 1.3.6.1.4.1.4249.2.5.4.6 | IntegerNumber | read-only | The number of regenerator channels working in this device. |
| dslRegenerationTable | 1.3.6.1.4.1.4249.2.5.4.7 | not-accessible | This table is a list of regenerator channels working in this device. Devices that do not have regenerator functions do not need to implement this table. | |
| dslRegenerationEntry | 1.3.6.1.4.1.4249.2.5.4.7.1 | not-accessible | Regeneration channel | |
| NUM dslRegenerationId | 1.3.6.1.4.1.4249.2.5.4.7.1.1 | IntegerIndex | not-accessible | A unique index of the DSL regeneration channel. It is constant between configuration changes. |
| NUM dslRegenerationSide1 | 1.3.6.1.4.1.4249.2.5.4.7.1.2 | IntegerIndex | read-only | This is the dslChannelId of side 1 of the regeneration channel. |
| NUM dslRegenerationSide2 | 1.3.6.1.4.1.4249.2.5.4.7.1.3 | IntegerIndex | read-only | This is the dslChannelId of side 2 of the regeneration channel. |
| indication | 1.3.6.1.4.1.4249.2.5.5 | |||
| NUM indicationLedNumber | 1.3.6.1.4.1.4249.2.5.5.1 | IntegerNumber | read-only | Number of LED indicators the device has. |
| indicationLedTable | 1.3.6.1.4.1.4249.2.5.5.2 | not-accessible | A list LED indicators. Each consists of an LED index, textual description, populated/not populated status, current color and blinking rate. | |
| indicationLedEntry | 1.3.6.1.4.1.4249.2.5.5.2.1 | not-accessible | LED inidicators. | |
| NUM indicationLedId | 1.3.6.1.4.1.4249.2.5.5.2.1.1 | IntegerIndex | not-accessible | A unique index of the LED indicator. It is constant between different models of one device family. |
| STR indicationLedDescription | 1.3.6.1.4.1.4249.2.5.5.2.1.2 | DisplayString | read-only | Description of LED indicator. May include name on the front/back panel of the device and/or place of the LED. |
| INT indicationLedState | 1.3.6.1.4.1.4249.2.5.5.2.1.3 | INTEGER | read-only | The state of a LED. If the LED is not present, it's state is not-populated. If it is not lit, it's state is OFF. If it is lit, then a color is reported. |
| INT indicationLedFlash | 1.3.6.1.4.1.4249.2.5.5.2.1.4 | INTEGER | read-only | If the LED is switching on and off at a constant rate, shows how is it blinking. Values from 1 to 14 represent a bit mask, where each bit shows, if the LED is lit during corresponding quarter of second: bit 0 - first quarter, bit 1 - second etc. If the LED is lit constantly, returns 'constant(15)'. |
| temperature | 1.3.6.1.4.1.4249.2.5.6 | |||
| NUM temperatureSensorNumber | 1.3.6.1.4.1.4249.2.5.6.1 | IntegerNumber | read-only | Number of the temperature sensors the device has. |
| temperatureSensorTable | 1.3.6.1.4.1.4249.2.5.6.2 | not-accessible | A list temperature sensors. First sensor in the list should always be the sensor that can be considered as 'Board temperature' sensor. For each sensor there is an identifier, description and the temperature value in 1/1000 of the Celcium degree. | |
| temperatureSensorEntry | 1.3.6.1.4.1.4249.2.5.6.2.1 | not-accessible | Temperature sensors. | |
| NUM temperatureSensorId | 1.3.6.1.4.1.4249.2.5.6.2.1.1 | IntegerIndex | not-accessible | A unique index of the temperature sensor. It is constant between different models of one device family. |
| STR temperatureSensorDescription | 1.3.6.1.4.1.4249.2.5.6.2.1.2 | DisplayString | read-only | Description of the temperature sensor. Should describe, where temperature is measured. |
| NUM temperatureSensorValue | 1.3.6.1.4.1.4249.2.5.6.2.1.3 | IntegerMillis | read-only | The temperature value in 1/1000 of the Celcium degree. For example, 25000 = 25C, -10500 = -10.5C. |
| time | 1.3.6.1.4.1.4249.2.5.7 | |||
| NUM timeSourceNumber | 1.3.6.1.4.1.4249.2.5.7.1 | IntegerNumber | read-only | Number of device's UTC time sources. |
| timeSourceTable | 1.3.6.1.4.1.4249.2.5.7.2 | not-accessible | Table of UTC time sources present on device. Examples are UTC, satellite (GNSS) etc. | |
| timeSourceEntry | 1.3.6.1.4.1.4249.2.5.7.2.1 | not-accessible | Time source. | |
| NUM timeSourceId | 1.3.6.1.4.1.4249.2.5.7.2.1.1 | IntegerIndex | not-accessible | A unique index of the time source. It is constant between reconfigurations of a device. |
| STR timeSourceName | 1.3.6.1.4.1.4249.2.5.7.2.1.2 | DisplayString | read-only | Name of the time source. For example: NTP. |
| I32 timeSourceStratum | 1.3.6.1.4.1.4249.2.5.7.2.1.3 | Integer32 | read-only | Clock source stratum as it is defined in NTP. |
| DAT timeSourceValue | 1.3.6.1.4.1.4249.2.5.7.2.1.4 | DateAndTime | read-only | UTC time as reported by this source. If source is not ready (no connection to server or no signal), zero-length octet string is returned. |
| I32 timeZone | 1.3.6.1.4.1.4249.2.5.7.3 | Integer32 | read-write | Displacement, in minutes, of local time relative to UTC. For example, 240 is UTC+04:00 (Moscow Time), -480 is UTC-08:00 (Pacific Standard Time). |
| localPower | 1.3.6.1.4.1.4249.2.5.8 | |||
| NUM powerSourceNumber | 1.3.6.1.4.1.4249.2.5.8.1 | IntegerNumber | read-only | Number of device's local power sources. |
| powerSourceTable | 1.3.6.1.4.1.4249.2.5.8.2 | not-accessible | Table of local power sources available to the device, listed in priority order. | |
| powerSourceEntry | 1.3.6.1.4.1.4249.2.5.8.2.1 | not-accessible | Power source. | |
| NUM powerSourceId | 1.3.6.1.4.1.4249.2.5.8.2.1.1 | IntegerIndex | not-accessible | A unique index of the power source. |
| STR powerSourceName | 1.3.6.1.4.1.4249.2.5.8.2.1.2 | DisplayString | read-only | Name of the power source. For example: 48V-a. |
| I32 powerSourceNominalVoltage | 1.3.6.1.4.1.4249.2.5.8.2.1.3 | Integer32 | read-only | Nominal voltage of the power source. |
| INT powerSourceStatus | 1.3.6.1.4.1.4249.2.5.8.2.1.4 | INTEGER | read-only | Availability status of this power source. |
| sfpDDM | 1.3.6.1.4.1.4249.2.5.9 | |||
| NUM sfpDDMNumber | 1.3.6.1.4.1.4249.2.5.9.1 | IntegerNumber | read-only | Number of the sfp modules the device has. |
| sfpDDMTable | 1.3.6.1.4.1.4249.2.5.9.2 | not-accessible | Table of DDM values read from SFP | |
| sfpDDMEntry | 1.3.6.1.4.1.4249.2.5.9.2.1 | not-accessible | SFP Digital diagnostics monitoring | |
| NUM sfpDDMId | 1.3.6.1.4.1.4249.2.5.9.2.1.1 | IntegerIndex | not-accessible | An Index of DDM value |
| NUM sfpDDMTemperature | 1.3.6.1.4.1.4249.2.5.9.2.1.2 | IntegerMillis | read-only | Internally measured transceiver temperature in range from -128C to +128C. |
| NUM sfpDDMSupplyVoltage | 1.3.6.1.4.1.4249.2.5.9.2.1.3 | IntegerMillis | read-only | Internally measured transceiver supply voltage in range from 0 to +6.5535 Volts. |
| NUM sfpDDMTxBiasCurrent | 1.3.6.1.4.1.4249.2.5.9.2.1.4 | IntegerWithDecimal | read-only | Measured TX bias current in range from 0 to 131.0 mA |
| SFP sfpDDMTxOutputmW | 1.3.6.1.4.1.4249.2.5.9.2.1.5 | SfpPowerMilliWatt | read-only | Measured TX output power in range from 0 to 6.5535 mW |
| NUM sfpDDMTxOutputdBm | 1.3.6.1.4.1.4249.2.5.9.2.1.6 | IntegerWithDecimal | read-only | Measured TX output power in range from -40 to +8.2 dBm |
| SFP sfpDDMRxInputmW | 1.3.6.1.4.1.4249.2.5.9.2.1.7 | SfpPowerMilliWatt | read-only | Measured RX received optical power from 0 to 6.5535 mW. |
| NUM sfpDDMRxInputdBm | 1.3.6.1.4.1.4249.2.5.9.2.1.8 | IntegerWithDecimal | read-only | Measured RX received optical power from -40 to +8.2 dBm. |
| INT sfpDDMMediaType | 1.3.6.1.4.1.4249.2.5.9.2.1.9 | INTEGER | read-only | This object returns sfpMedia type. when module is not mounted return value is unknown (3) |
| INT sfpDDMPresence | 1.3.6.1.4.1.4249.2.5.9.2.1.10 | INTEGER | read-only | This object indicates if specified SFP interface plugged or not present (1) indicates that SFP interface is plugged. absent (2) indicates that SFP interface is unplugged. |
| NUM sfpDDMIfIndex | 1.3.6.1.4.1.4249.2.5.9.2.1.11 | InterfaceIndex | read-only | Index of interface in interfaces table, which state this SFP interface represents. |
| io | 1.3.6.1.4.1.4249.2.5.10 | |||
| ioDIn | 1.3.6.1.4.1.4249.2.5.10.1 | |||
| NUM ioDInNumber | 1.3.6.1.4.1.4249.2.5.10.1.1 | IntegerNumber | read-only | Number of digital inputs the device has |
| ioDInTable | 1.3.6.1.4.1.4249.2.5.10.1.2 | not-accessible | Discrete input table represents all discrete (digital) inputs present and configured in the device, including voltage inputs, dry contact inputs and any other. | |
| ioDInEntry | 1.3.6.1.4.1.4249.2.5.10.1.2.1 | not-accessible | Discrete (digital) input | |
| NUM dInId | 1.3.6.1.4.1.4249.2.5.10.1.2.1.1 | IntegerIndex | not-accessible | A unique index of discrete input. It should remain constant through any reconfiguration and reboot of the device. |
| STR dInName | 1.3.6.1.4.1.4249.2.5.10.1.2.1.2 | DisplayString | read-only | Discrete input name, typically - connector marking. |
| INT dInState | 1.3.6.1.4.1.4249.2.5.10.1.2.1.3 | INTEGER | read-only | Discrete input state. For voltage input values are high(3) or low(4). For npn or dry contact input it is open(1) or closed(2). |
| INT dInNormalState | 1.3.6.1.4.1.4249.2.5.10.1.2.1.4 | INTEGER | read-write | Normal discrete input state. If it is any(5), then input is considered informative, else it is has normal (normally open or normally closed) and alarm state. |
| INT dInAlarmSeverity | 1.3.6.1.4.1.4249.2.5.10.1.2.1.5 | INTEGER | read-write | dInAlarmSeverity allows systemAlarm variable to be triggered by the state of the input. Setting its to no(1) means that systemAlarm is not triggered; setting its to nonurgent(2) or urgent(3) will trigger the systemAlarm if dInState is not equal to dInNormalState. |
| STR dInDescription | 1.3.6.1.4.1.4249.2.5.10.1.2.1.6 | DisplayString | read-write | User configurable description: input purpose, meaning, net. |
| INT dInTrapEnable | 1.3.6.1.4.1.4249.2.5.10.1.2.1.7 | INTEGER | read-write | If true(1), trap will be sent on each change of dInState. If false(2), no traps will be sent |
| ioDOut | 1.3.6.1.4.1.4249.2.5.10.2 | |||
| NUM ioDOutNumber | 1.3.6.1.4.1.4249.2.5.10.2.1 | IntegerNumber | read-only | Number of digital outputs the device has |
| ioDOutTable | 1.3.6.1.4.1.4249.2.5.10.2.2 | not-accessible | Discrete output table represents all discrete outputs present and configured in the device, including relay outputs, voltage outputs, and any other. | |
| ioDOutEntry | 1.3.6.1.4.1.4249.2.5.10.2.2.1 | not-accessible | Discrete output | |
| NUM dOutId | 1.3.6.1.4.1.4249.2.5.10.2.2.1.1 | IntegerIndex | not-accessible | A unique index of discrete output. It should remain constant through any reconfiguration and reboot of the device. |
| STR dOutName | 1.3.6.1.4.1.4249.2.5.10.2.2.1.2 | DisplayString | read-only | Discrete output name, typically - connector marking. |
| INT dOutState | 1.3.6.1.4.1.4249.2.5.10.2.2.1.3 | INTEGER | read-write | Discrete output state. For voltage output values are high(3) or low(4). For open-drain, npn, relay coil output (and other) it is active(1) or inactive(2). active(1) : coil energized, open-drain or npn output conducting current. inactive(2): coil de-energized, open-drain or npn output not conducting. |
| INT dOutNormalState | 1.3.6.1.4.1.4249.2.5.10.2.2.1.4 | INTEGER | read-write | Normal discrete output state. If it is any(5), then input is considered informative, else it is has normal (normally open or normally closed) and alarm state. |
| INT dOutAlarmSeverity | 1.3.6.1.4.1.4249.2.5.10.2.2.1.5 | INTEGER | read-write | dOutAlarmSeverity allows systemAlarm variable to trigger the state of the output. Setting its to no(1) means that systemAlarm will not trigger; setting its to nonurgent(2) or urgent(3) will trigger the output by changing the dOutState to the opposite of dOutNormalState. |
| STR dOutDescription | 1.3.6.1.4.1.4249.2.5.10.2.2.1.6 | DisplayString | read-write | User configurable description: output purpose, connected load, net. |
| INT dOutTrapEnable | 1.3.6.1.4.1.4249.2.5.10.2.2.1.7 | INTEGER | read-write | If true(1), trap will be sent on each change of dOutState. If false(2), no traps will be sent |
| INT statReset | 1.3.6.1.4.1.4249.2.5.11 | INTEGER | read-write | Writing reset(1) perform a device statistics reset. All device statistics should be re-initialized. Read always returns readValue(2). |
| maintenance | 1.3.6.1.4.1.4249.2.6 | |||
| tftp | 1.3.6.1.4.1.4249.2.6.1 | |||
| IP tftpServerIP | 1.3.6.1.4.1.4249.2.6.1.1 | IpAddress | read-write | The IP address of the server from which the file is loaded. This value is not stored between device reboots and should be set before each TFTP operation. |
| STR tftpSoftFileName | 1.3.6.1.4.1.4249.2.6.1.2 | DisplayString | read-write | The remote filename for firmware upgrade. This value is not stored between device reboots and should be set before each TFTP operation. |
| STR tftpConfFileName | 1.3.6.1.4.1.4249.2.6.1.3 | DisplayString | read-write | The remote filename for the up and download the startup-config. This value is not stored between device reboots and should be set before each TFTP operation. |
| I32 tftpConnectionTimeout | 1.3.6.1.4.1.4249.2.6.1.4 | Integer32 | read-write | Time the device will wait for reply from TFTP server, during connection and while transferring a block of data. While waiting, the device will retransmit it's request each 8 seconds (typically). Thus it is reasonable to set the timeout to a multiple of 8 seconds. If during tftpConnectionTimeout device will not get a responce from the server, current TFTP operation will be retried several times (set by tftpNumRetries) before ending with and error. |
| I32 tftpNumRetries | 1.3.6.1.4.1.4249.2.6.1.5 | Integer32 | read-write | Number of times the device will retry to connect and perform requested operation (firmware download, configuration up/download) before stopping with error status. |
| INT tftpTransCmd | 1.3.6.1.4.1.4249.2.6.1.6 | INTEGER | read-write | This object, when read, always returns readValue(2). Setting this object will initiate following actions: swDownload(3) Download the firmware from TFTP server, filename on the server is specified by tftpSoftFileName. configDownload(4) Download the startup-config from the TFTP server, filename on the server is specified by tftpConfFileName. configUpLoad(5) Download the startup-config to the TFTP-Server, filename on the server is specified by tftpConfFileName. allDownload(6) Download the startup-config and firmware from the TFTP server. sdSwUpload(9) Upload software from main flash to SD card sdSwDownload(10) Download software from SD card sdConfigUpload(11) Upload the startup-config from main flash to SD card sdConfigDownload(12) Download the startup-config from SD card sdLoaderUpload(13) Upload bootloader from main flash to SD card sdLoaderDownload(14) Download bootloader from SD card sdCreateSnapshot(15) Upload Software, Loader and startup-config to SD card. Create filesystem if necesary noOp(1) Cancel all running SNMP-initiated TFTP operations. TFTP server IP address is configured by tftpServerIP variable. If device does not perform any other maintenance operations, the command will be executed, otherwise it will be denied. In case of command execution: The value of tftpLastOp will change to the value of the command. tftpTransferStatus will reflect transfer progress (connecting- transferringData-endedOk/error). Current timestamp will be saved into tftpLastOpTime variable. During the execution a series of tftpStatusChange is sent. In case of denial: tftpLastOp and tftpTransferStatus will not be affected. Current timestamp is also not saved into tftpLastOpTime variable. By quering tftpLastOpTime before and after setting the tftpTransCmd one can find out if the command was denied. Current operation that caused the denial can be queried by tftpLastOp. tftpStatusChange with tftpTransferStatus value of busyByOther is sent. |
| INT tftpLastOp | 1.3.6.1.4.1.4249.2.6.1.7 | INTEGER | read-only | This object returns the last executed maintenance operation, regardless was it successful or not. It reports following actions: noOp(1) No maintenance operations were requested since last restart of the device. tftpSwDownload(3) Software download initiated from SNMP. tftpConfigDownload(4) Startup-config download initiated from SNMP. tftpConfigUpload(5) Startup-config upload initiated from SNMP. otherSwDownload(6) Software download, either TFTP or any other way, not initiated from SNMP. otherConfigDownload(7) Startup-config download, either TFTP or any other way, not initiated from SNMP. otherConfigUpload(8) Startup-config upload, either TFTP or any other way, not initiated from SNMP. sdSwUpload(9) Upload software from main flash to SD card sdSwDownload(10) Download software from SD card sdConfigUpload(11) Upload the startup-config from main flash to SD card sdConfigDownload(12) Download the startup-config from SD card sdLoaderUpload(13) Upload bootloader from main flash to SD card sdLoaderDownload(14) Download bootloader from SD card sdCreateSnapshot(15) Upload Software, Loader and startup-config to SD card. Create filesystem if necesary |
| INT tftpTransferStatus | 1.3.6.1.4.1.4249.2.6.1.8 | INTEGER | read-only | Status of SNMP-initiated TFTP transfer. Results: noOp(1) Default, no TFTP operation was in progress. connecting(2) Device is connecting to the server specified by tftpServerIP. transferringData(3) TFTP data transfer is in progress. endedOk(4) TFTP transfer ended with success. error(5) TFTP data transfer ended with an Error, (e.g. server timeout or remote filename not found). Check TFTP server log file for details. busyByOther(6) This value can never be read directly from the MIB tree. It is used only in tftpStatusChange to notify that device is bysy with other maintenance operation and the request for another operation was denied. If tftpLastOp is tftpSwDownload(3), tftpConfigDownload(4) or tftpConfigUpload(5), this variable shows the status of exactly that operation. Transfers initiated by other means (for example CLI command TFTP operation or normal software download), do not change this variable. This way one can get full status of SNMP-initiated up/download without interference. |
| TIK tftpLastOpTime | 1.3.6.1.4.1.4249.2.6.1.9 | TimeTicks | read-only | The time in timeticks when last maintenance operation (TFTP software download or configuration up/download) was executed from SNMP by setting tftpTransCmd. If operation execution was denied, this variable is not affected. By comparing tftpLastOpTime before and after tftpTransCmd setting one can find out if the command was successful or denied. |
| INT tftpSoftConfirm | 1.3.6.1.4.1.4249.2.6.1.10 | INTEGER | read-write | Writing softConfirm(1) to tftpSoftConfirm will confirm previously uploaded firmware. Read always returns readValue(2). |
| INT tftpProtocolVersion | 1.3.6.1.4.1.4249.2.6.1.11 | INTEGER | read-write | Allows protocol selection between tftp(1), ftp(2) and sftp(3) for up/download. This value is not stored between device reboots and should be set before each operation. |
| STR tftpServerUserName | 1.3.6.1.4.1.4249.2.6.1.12 | DisplayString | read-write | The Username for Server access. This value is not stored between device reboots and should be set before each operation. |
| STR tftpServerUserPass | 1.3.6.1.4.1.4249.2.6.1.13 | DisplayString | read-write | The User Password for Server access. This value is not stored between device reboots and should be set before each operation. |
| I32 tftpServerPortNumber | 1.3.6.1.4.1.4249.2.6.1.14 | Integer32 | read-write | The port number for accessing FTP or SFTP server. This value is not stored between device reboots and should be set before each operation. |
| nateksSecurity | 1.3.6.1.4.1.4249.2.7 | |||
| macFilter | 1.3.6.1.4.1.4249.2.7.1 | |||
| macFilterConfigTable | 1.3.6.1.4.1.4249.2.7.1.1 | not-accessible | Table representing MAC-based filter configuration of network interfaces. | |
| macFilterConfigEntry | 1.3.6.1.4.1.4249.2.7.1.1.1 | not-accessible | MAC-based filter configuration of one interface | |
| NUM macFilterConfigIfIndex | 1.3.6.1.4.1.4249.2.7.1.1.1.1 | IntegerIndex | not-accessible | Index in interfaces table of the configured interface. |
| INT macFilterConfigStatus | 1.3.6.1.4.1.4249.2.7.1.1.1.2 | INTEGER | read-only | Indicates, whether filtering is on(1) or off(2). |
| INT macFilterConfigAction | 1.3.6.1.4.1.4249.2.7.1.1.1.3 | INTEGER | read-only | Security action when non-permitted frame is received: filter - just drop the frame; indicate - drop the frame and send trap; block - drop the frame, send trap and permanently block the interface. |
| macFilterWhitelistTable | 1.3.6.1.4.1.4249.2.7.1.2 | not-accessible | White list of allowed MAC addresses. | |
| macFilterWhitelistEntry | 1.3.6.1.4.1.4249.2.7.1.2.1 | not-accessible | White list | |
| NUM macFilterWhitelistIndex | 1.3.6.1.4.1.4249.2.7.1.2.1.1 | IntegerIndex | not-accessible | Index in whitelist table. |
| NUM macFilterWhitelistIfIndex | 1.3.6.1.4.1.4249.2.7.1.2.1.2 | IntegerIndex | not-accessible | IfIndex of the related interface. |
| MAC macFilterWhitelistMAC | 1.3.6.1.4.1.4249.2.7.1.2.1.3 | MacAddress | read-only | Permitted MAC address |
| macFilterViolationsTable | 1.3.6.1.4.1.4249.2.7.1.3 | not-accessible | List of several last MAC address security violations. | |
| macFilterViolationsEntry | 1.3.6.1.4.1.4249.2.7.1.3.1 | not-accessible | Violations list | |
| NUM macFilterViolationsIndex | 1.3.6.1.4.1.4249.2.7.1.3.1.1 | IntegerIndex | not-accessible | Index in violations table. |
| NUM macFilterViolationsIfIndex | 1.3.6.1.4.1.4249.2.7.1.3.1.2 | IntegerIndex | read-only | IfIndex of the related interface. |
| MAC macFilterViolationsMAC | 1.3.6.1.4.1.4249.2.7.1.3.1.3 | MacAddress | read-only | Violating MAC address |
| TIK macFilterViolationsTimestamp | 1.3.6.1.4.1.4249.2.7.1.3.1.4 | TimeTicks | read-only | Timestamp of last time an action was taken against security violation performed by this MAC address on this interface. Measured in 1/100s of second from the last start of the unit - same as sysUpTime. |
| nateksDev | 1.3.6.1.4.1.4249.2.8 | |||
| nateksMibInfo | 1.3.6.1.4.1.4249.3 | |||
| nateksMIBGroup | 1.3.6.1.4.1.4249.3.1 | |||
| nateksMinimalGroup | 1.3.6.1.4.1.4249.3.1.1 | A minimal collection of objects requred from any supporting device. | ||
| nateksCommonInfoGroup | 1.3.6.1.4.1.4249.3.1.2 | Basic unit information regarding model and software of a unit. | ||
| nateksCommonExtGroup | 1.3.6.1.4.1.4249.3.1.3 | Extended unit information regarding hardware and software of a unit. | ||
| nateksConfigBasicGroup | 1.3.6.1.4.1.4249.3.1.4 | Basic configuration management interface. | ||
| nateksConfigConfirmedGroup | 1.3.6.1.4.1.4249.3.1.5 | Minimal configuration management interface with support for Apply-Confirm configuration behaviour. | ||
| nateksConfigBackupGroup | 1.3.6.1.4.1.4249.3.1.6 | Local configuration backup management interface. | ||
| nateksConfigGroupsGroup | 1.3.6.1.4.1.4249.3.1.7 | Management interface for variable groups. | ||
| nateksConfigRWGroup | 1.3.6.1.4.1.4249.3.1.8 | Management interface for full configuration profile read/write. | ||
| nateksG826Group | 1.3.6.1.4.1.4249.3.1.9 | Use of g826Table is deprecated in favor of ifG826Table. | ||
| nateksIfG826Group | 1.3.6.1.4.1.4249.3.1.10 | G.826 statistics information and management. | ||
| nateksAlarmGroup | 1.3.6.1.4.1.4249.3.1.11 | Old style alarm table. Using ifAlarmTable is more convenient than alarmTable. Members of this group are included into alarmValueChange notification. | ||
| nateksIfAlarmGroup | 1.3.6.1.4.1.4249.3.1.12 | Alarm information and management. | ||
| nateksTlmGroup | 1.3.6.1.4.1.4249.3.1.13 | TLM information and management. | ||
| nateksDSLGroup | 1.3.6.1.4.1.4249.3.1.14 | DSL channel information. | ||
| nateksDSLMultipairGroup | 1.3.6.1.4.1.4249.3.1.15 | DSL multi-pair bonding information. | ||
| nateksDSLLTUGroup | 1.3.6.1.4.1.4249.3.1.16 | Information aout remote power and regenerators present only on LTU/NTU DSL units. | ||
| nateksDSLRegenerationGroup | 1.3.6.1.4.1.4249.3.1.17 | DSL regeneration channels information. | ||
| nateksIndicationGroup | 1.3.6.1.4.1.4249.3.1.18 | LED indication status. | ||
| nateksTemperatureGroup | 1.3.6.1.4.1.4249.3.1.19 | Temperature sensors data. | ||
| nateksTimeGroup | 1.3.6.1.4.1.4249.3.1.20 | Data from time reference sources. | ||
| nateksLocalPowerGroup | 1.3.6.1.4.1.4249.3.1.21 | Local power sources status. | ||
| nateksTFTPManagementGroup | 1.3.6.1.4.1.4249.3.1.22 | Software upload and configuration upload/download via TFTP protocol. | ||
| nateksMacFilterGroup | 1.3.6.1.4.1.4249.3.1.23 | MAC-based Ethernet port access control group. | ||
| nateksSfpDDMGroup | 1.3.6.1.4.1.4249.3.1.24 | SFP DDM parameters group | ||
| nateksDigitalIoGroup | 1.3.6.1.4.1.4249.3.1.25 | Digital Input/Output managementgroup | ||
| nateksStatResetGroup | 1.3.6.1.4.1.4249.3.1.26 | Statistics reset group | ||
| nateksTlmNotificationGroup | 1.3.6.1.4.1.4249.3.1.1001 | TLM status change notification is required if an agent implements TLM table. | ||
| nateksAlarmNotificationGroup | 1.3.6.1.4.1.4249.3.1.1002 | Alarm value change notification is required if an agent implements Alarm table. | ||
| nateksTFTPNotificationGroup | 1.3.6.1.4.1.4249.3.1.1003 | TFTP software or configuration management requires implementation of this notification to communicate the status of operation to the management station. | ||
| nateksMacFilterNotificationGroup | 1.3.6.1.4.1.4249.3.1.1004 | Notification about security violations are required if an agent implements MAC filtering. | ||
| nateksDigitalIoNotificationGroup | 1.3.6.1.4.1.4249.3.1.1005 | Notification about input/output state changes are required if an agent implements digital IO. | ||
| nateksMIBCompliance | 1.3.6.1.4.1.4249.3.2 | |||
| nateksMinCompliance | 1.3.6.1.4.1.4249.3.2.1 | Minimal variable set to claim compiance with NATEKS-MIB. | ||
| nateksBasicCompliance | 1.3.6.1.4.1.4249.3.2.2 | Basic variable set to claim compiance with NATEKS-MIB. | ||
| nateksConfigBasicCompliance | 1.3.6.1.4.1.4249.3.2.3 | Basic capabilities of configuration management. | ||
| nateksConfigConfirmedCompliance | 1.3.6.1.4.1.4249.3.2.4 | Capabilities of configuration management with Apply and Confirm behaviour. | ||
| nateksConfigBackupCompliance | 1.3.6.1.4.1.4249.3.2.5 | Capabilities of local configuration backup management. | ||
| nateksConfigFullCompliance | 1.3.6.1.4.1.4249.3.2.6 | Basic capabilities of configuration management. | ||
| nateksG826Compliance | 1.3.6.1.4.1.4249.3.2.7 | G.826 statistics representation and management | ||
| nateksIfAlarmCompliance | 1.3.6.1.4.1.4249.3.2.8 | Alarm representation and management | ||
| nateksTLMCompliance | 1.3.6.1.4.1.4249.3.2.9 | TLM (dry contact inputs) representation and management | ||
| nateksDSLLTUCompliance | 1.3.6.1.4.1.4249.3.2.10 | DSL information for LTU and NTU DSL units | ||
| nateksDSLRegeneratorCompliance | 1.3.6.1.4.1.4249.3.2.11 | DSL information for DSL regenerator/repeater units | ||
| nateksIndicationCompliance | 1.3.6.1.4.1.4249.3.2.12 | LED status information. | ||
| nateksTemperatureCompliance | 1.3.6.1.4.1.4249.3.2.13 | Temperature sensors data. | ||
| nateksTimeCompliance | 1.3.6.1.4.1.4249.3.2.14 | Data from time reference sources. | ||
| nateksLocalPowerCompliance | 1.3.6.1.4.1.4249.3.2.15 | Local power sources status. | ||
| nateksTFTPManagementCompliance | 1.3.6.1.4.1.4249.3.2.16 | Software upload and configuration upload/download via TFTP protocol. | ||
| nateksMacFilterCompliance | 1.3.6.1.4.1.4249.3.2.17 | MAC-based Ethernet port access control group. | ||
| nateksSfpDDMGroupCompliance | 1.3.6.1.4.1.4249.3.2.18 | SFP DDM information support. | ||
| nateksDigitalIoCompliance | 1.3.6.1.4.1.4249.3.2.19 | Digital input/output management support. | ||
| nateksStatResetCompliance | 1.3.6.1.4.1.4249.3.2.20 | Statistics reset support. |
RFC description
Common MIB for Nateks Group telecommunications equipment covering system configuration, statistics, and SFP module monitoring.
Start monitoring Nateks Group access equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.