NATEKS-MIB :: dInNormalState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NATEKS-MIB › dInNormalState

dInNormalState

Module: NATEKS-MIB

OID (symbolic): NATEKS-MIB::dInNormalState

OID (numeric): 1.3.6.1.4.1.4249.2.5.10.1.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Normal discrete input state. If it is any(5), then input is considered informative, else it is has normal (normally open or normally closed) and alarm state.

What is dInNormalState?

Configured 'normal' (non-alarm) state for this input -- open(1), closed(2), high(3), low(4), or any(5) if the input is purely informational rather than alarmable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4249.2.5.10.1.2.1.4
snmpwalk -v2c -c public <target> NATEKS-MIB::dInNormalState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4249.2.5.10.1.2.1.4.1
snmpget -v2c -c public <target> NATEKS-MIB::dInNormalState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4249.2.5.10.1.2.1.4.1 i <value>

Start monitoring Nateks Group access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATEKS-MIB::dInNormalState OID value, configure state conditions and alerts, and monitor any Nateks Group access equipment from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4249nateksNATEKS-MIB
1.3.6.1.4.1.4249.2nateksMgmtNATEKS-MIB
1.3.6.1.4.1.4249.2.5statsNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10ioNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.1ioDInNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.1.2ioDInTableNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.1.2.1ioDInEntryNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.1.2.1.4dInNormalStateNATEKS-MIB