All MIBs › NATEKS-MIB › tftpLastOp
tftpLastOp
Module: NATEKS-MIB
OID (symbolic): NATEKS-MIB::tftpLastOp
OID (numeric): 1.3.6.1.4.1.4249.2.6.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object returns the last executed maintenance operation, regardless was it successful or not. It reports following actions: noOp(1) No maintenance operations were requested since last restart of the device. tftpSwDownload(3) Software download initiated from SNMP. tftpConfigDownload(4) Startup-config download initiated from SNMP. tftpConfigUpload(5) Startup-config upload initiated from SNMP. otherSwDownload(6) Software download, either TFTP or any other way, not initiated from SNMP. otherConfigDownload(7) Startup-config download, either TFTP or any other way, not initiated from SNMP. otherConfigUpload(8) Startup-config upload, either TFTP or any other way, not initiated from SNMP. sdSwUpload(9) Upload software from main flash to SD card sdSwDownload(10) Download software from SD card sdConfigUpload(11) Upload the startup-config from main flash to SD card sdConfigDownload(12) Download the startup-config from SD card sdLoaderUpload(13) Upload bootloader from main flash to SD card sdLoaderDownload(14) Download bootloader from SD card sdCreateSnapshot(15) Upload Software, Loader and startup-config to SD card. Create filesystem if necesary
What is tftpLastOp?
Read-only record of the last maintenance operation that ran, whether it succeeded or not, and whether it was SNMP-initiated (e.g. tftpSwDownload(3)) or triggered another way (e.g. otherSwDownload(6)).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4249.2.6.1.7 snmpwalk -v2c -c public <target> NATEKS-MIB::tftpLastOp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4249.2.6.1.7.1 snmpget -v2c -c public <target> NATEKS-MIB::tftpLastOp.1
Start monitoring Nateks Group access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATEKS-MIB::tftpLastOp OID value, configure state conditions and alerts, and monitor any Nateks Group access equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4249 | nateks | NATEKS-MIB |
| 1.3.6.1.4.1.4249.2 | nateksMgmt | NATEKS-MIB |
| 1.3.6.1.4.1.4249.2.6 | maintenance | NATEKS-MIB |
| 1.3.6.1.4.1.4249.2.6.1 | tftp | NATEKS-MIB |
| 1.3.6.1.4.1.4249.2.6.1.7 | tftpLastOp | NATEKS-MIB |